Splitting multiple IDoc XML files into single IDoc messages for R/3

Hi all. I have a problem splitting IDoc XML files coming in to XI. I currently have an interface that takes in single store sale IDoc transactions (type WPUBON01) in an IDoc XML file. I then have some complex graphical mapping on the IDoc before sending to R/3 via the IDoc adapter. This works fine. However, we now wish to include multiple sales in one file i.e. many WPUBON01 IDocs. I could use message splitting to do this BUT the mapping is so complex, I do not wish to have to change it to enable the processing of many IDocs in one file instead of just one.
What I want to do: have one mapping splitting a multiple IDoc XML file into single IDoc messages and then another taking these single messages as before and performing the mapping. I cannot find a way to do this in one interface; the main problem I'm having is getting XI to split the multiple IDocs into many single IDoc messages within XI itself. I'd be very grateful for any advice on the best way to do this.
Thankyou.
Stuart Richards (Halfords, UK)

Bhavesh,
Thanks again for a clear explanation... I'm moving forwards but still struggling. I've been on this all afternoon today (after a break on other things) and just cannot get my message to split properly (though the SOAP adapter problem I had earlier is now fixed!). If my initial IDoc XML file contains this format:
<WPUBON01><IDOC>....</IDOC>
<IDOC>....</IDOC>
<IDOC>....</IDOC></WPUBON01>
.. I'm not sure what the cardinaility on the first message mapping and interface mapping should be. I'd have thought the source interface would be 1 and the target would be 0..unbounded but this isn't working. I'm trying different things but I get different errors each time. Currently, I have the above cardinality in my first interface and I'm passing in the following data:
<WPUBON01><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832292</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160633</VORGZEIT><BONNUMMER>1001</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1001</ZUONR></E1WPB06></E1WPB01></IDOC><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832293</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160634</VORGZEIT><BONNUMMER>1002</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1002</ZUONR></E1WPB06></E1WPB01></IDOC><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832294</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160634</VORGZEIT><BONNUMMER>1003</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1003</ZUONR></E1WPB06></E1WPB01></IDOC></WPUBON01>
In the message monitor, I get a chequered flag. Great. However, I get the dreaded error 500 in the SOAP receiver comm channel:
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Exception caught by adapter framework: SOAP Error
Delivery of the message to the application using connection AFW failed, due to: SOAP Error.
Any ideas as to what this might be?! I'm getting there.... if I get a solution out of this, I promise to write the blog myself!
Cheers
Stuart

Similar Messages

Convert the IDOC XML file into single string?

Hello All,
I have a scenario, where i need to conver the IDOC XML into single string, to send it to target.
Please let me know how can we achive this, I dont know java coding.
Please help me out to write the java code.
Thanks and Regards,
Chinna

Hi Chinna,
You can do this in two ways -
1. Java mapping
https://wiki.sdn.sap.com/wiki/display/XI/JavaMapping-ConverttheInputxmlto+String
https://wiki.sdn.sap.com/wiki/display/Snippets/JavaMapping-ConverttheInputxmltoString
2. XSLT mapping
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Regards,
Sunil Chandra

Creating an xml file from a playlist - message for iTunes staff

When I created an xml file from a playlist I noticed that in the xml file the track name was merged with the artist name in this manner "I want you - Bob Dylan".
That was hardly a problem as I could easily correct this in the FileMaker Pro environment.
But subsequently I found out, that within iTunes the track name was similarly changed to the same format. Apparently this happened when iTunes created the xml file and inadvertently also changed the track name within iTunes.
It can easily be corrected by entering File/Info, but I had over 10.000 songs in that list and it will take a lot of time. I have to do this, as I created earlier for each song a file path in FileMaker Pro, which are unrecognizable now.
Could you please correct the xml file creating procedure?

I must confess that I can't reproduce this result myself anymore.
I created the xml file in iTunes via File/Library/Export Playlist/xml structure (I translate the Dutch terms loosely) and subsequently I imported the xml file into a Filemaker Pro via File/Import/xml.
The xsl style sheet looks ok.
It looks like a freak of nature.
Still I have the evidence in my iTunes playlist, where I have another 9000 clicks to go to repair the damage.
Let's forget about it, until it happens again.
Thanks for your time.

Download created XML File in batch mode // Parse XML file into single lines

Hello!
I upload a CSV file and based on that CSV file I create an XML "object". First I uploaded and downloaded it via gui frontendclass, but as it has to be run in a batch in the night I need to upload and download the data via OPEN DATASET.
The import and transformation of the CSV file works fine, also the transfer into an itab with the same structure as a CSV line is ok. I also create the XML file, which could be downloaded easily with gui-download but it is not permittet.
Import of data: I scan the folder and get the filenames into a itab, I loop over that itab and read the single files like this:
 OPEN DATASET ls_convert_batch FOR INPUT IN TEXT MODE ENCODING DEFAULT.
 CLEAR tab.
 IF sy-subrc = 0.
 DO.
 READ DATASET ls_convert_batch INTO line.
 IF sy-subrc <> 0.
 EXIT.
 ELSE.
 CLEAR tmptab.
 SPLIT line AT ';' INTO tmptab-product
 tmptab-contract
 tmptab-extagent.
 APPEND tmptab TO tab.
 ENDIF.
 ENDDO.
 ENDIF.
The XML file has a strucutre like
<file>
- <file formant_no="1.1" format_date="02.10.2003">
<status>V</status>
<number>001001025</numbner>
<name>Schmeisser,Christof</name>
- <details>
- <detail>
 <contract>00000003494</contract>
 <name>Schmeisser, Christof</name>
 <invoice_no>000000003840</invoice_no>
 <due_date>20100601</due_date>
 <amount>140,00</amount>
 </detail>
- <detail>
 <contract>00000003495</contract>
 <name>Schmeisser, Christof</name>
 <invoice_no>000000003841</invoice_no>
 <due_date>20100601</due_date>
 <amount>130,00</amount>
 </detail>
- </details>
<elements>2</elements>
<amount_overall>270</amount_overall>
</file>
At the moment I download it like this:
CALL METHOD cl_gui_frontend_services=>gui_download
 EXPORTING
 bin_filesize = l_xml_size
 filename = filename
 filetype = 'BIN'
* CONFIRM_OVERWRITE = '0'
 CHANGING
 data_tab = l_xml_table
 EXCEPTIONS
 OTHERS = 24.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ELSEIF sy-subrc = 0.
 lv_create_counter = lv_create_counter + 1.
 ENDIF.
But I need to download it via OPEN TRANSFER CLOSE Dataset as it has to run in batch mode.
Anyone has an idea? I am really desperate here. One idea would be to parse the single lines into a string and then create the XML file line by line as text and save it with ending XML, should work. But I don't know how!
Thank you very much in advance,
kind regards from Tallinn, Estonia,
Christof!
Edited by: Christof Schmeisser on Nov 25, 2010 7:51 PM
I edited the heading, would be too general and missleading!

Tipos Pools
TYPE-POOLS: ixml.
CLASS cl_ixml DEFINITION LOAD.
TYPES: BEGIN OF xml_node_type,
 node TYPE char50,
 vlnode TYPE string,
 END OF xml_node_type,
 BEGIN OF xml_line_type,
 data(256) TYPE x,
 END OF xml_line_type.
Tabelas Internas
DATA: ti_xml_node TYPE TABLE OF xml_node_type.
Variáveis TYPE REF
*Type REF para utilizar no XML
DATA: ixml_type TYPE REF TO if_ixml,
 streamfactory_type TYPE REF TO if_ixml_stream_factory,
 ostream_type TYPE REF TO if_ixml_ostream,
 istream_type TYPE REF TO if_ixml_istream,
 parser_type TYPE REF TO if_ixml_parser,
 renderer_type TYPE REF TO if_ixml_renderer,
 document_type TYPE REF TO if_ixml_document,
 encoding_type TYPE REF TO if_ixml_encoding,
 node_type TYPE REF TO if_ixml_node,
 element_dtrans_type TYPE REF TO if_ixml_element,
 element_xml_in_type TYPE REF TO if_ixml_element,
 element_roteiros_type TYPE REF TO if_ixml_element,
 element_roteiro_type TYPE REF TO if_ixml_element,
 element_vias_type TYPE REF TO if_ixml_element,
 element_via_type TYPE REF TO if_ixml_element,
 element_dummy_type TYPE REF TO if_ixml_element,
 gw_xml_node TYPE TABLE OF xml_node_type,
 gw_xml_node_ret TYPE TABLE OF xml_node_type,
 gw_xml_node_err TYPE TABLE OF xml_node_type,
 gw_xml_node_xml TYPE TABLE OF xml_node_type,
 gw_xml_table TYPE TABLE OF xml_line_type,
 gw_xml_table2 TYPE TABLE OF xml_line_type,
 gs_xml_node TYPE xml_node_type, "WA para leitura do xml
 gs_xml_node_ret TYPE xml_node_type, "WA para leitura do xml retorno
 gs_xml_node_err TYPE xml_node_type, "WA para leitura do xml erro
 gs_xml_node_xml TYPE xml_node_type, "WA para leitura do xml info sucesso
 gs_xml_table2 TYPE xml_line_type. "WA para importar xml
Variáveis do Programa
DATA: l_value TYPE string,
 l_rc TYPE i,
 l_xml_size TYPE i,
 cod_cartaorepom TYPE char20 VALUE '123456789',
 v_caminho_exp TYPE string VALUE 'C:TEMP',
 v_salvaarquivo TYPE string,
 v_nomearquivo TYPE string,
 w_nodetext TYPE string,
 v_roteiros TYPE string,
 v_roteiro TYPE string,
 v_roteiro_codigo TYPE string,
 v_percurso_codigo TYPE string,
 v_percurso_descricao TYPE string,
 v_cidade_origem TYPE string,
 v_estado_origem TYPE string,
 v_cidade_destino TYPE string,
 v_estado_destino TYPE string,
 v_transporte_tipo TYPE string,
 v_cartao_taxa TYPE string,
 v_cobra_taxa TYPE string.
Constants
CONSTANTS: cc_39 TYPE string VALUE '39', " Numero 39.
 cc_dt_trans TYPE string VALUE 'data_transfer'," document_type(name)
 cc_metodo_cod TYPE string VALUE 'metodo_codigo'," document_type(name)
 cc_xml_in TYPE string VALUE 'xml_in'," document_type(name)
 cc_ct_tx_ativ TYPE string VALUE 'cartao_taxa_ativacao'," document_type(name)
 cc_cartao TYPE string VALUE 'cartao', " Parâmetro Perform.
 cc_xml TYPE string VALUE '.XML'," extenção
 cc_bin TYPE char10 VALUE 'BIN'." filetype
START-OF-SELECTION.
PERFORM yf_inicia_criacao_xml USING cc_39.
element_roteiro_type = document_type->create_simple_element(
 name = cc_ct_tx_ativ
 parent = element_xml_in_type ).
PERFORM yf_dummy_roteiro USING cod_cartaorepom cc_cartao.
PERFORM yf_finaliza_xml.
PERFORM yf_exporta_xml USING v_caminho_exp.
PERFORM yf_convert_xml_to_itab TABLES gw_xml_node_ret
 USING v_salvaarquivo.
END-OF-SELECTION.
*& Form yf_inicia_criacao_xml
 text
 -->VALUE(P_0783) text
FORM yf_inicia_criacao_xml USING value(p_0783).
DATA: s_encoding_type TYPE string VALUE 'ISO-8859-1'.
Cria o ixml factory
ixml_type = cl_ixml=>create( ).
*Cria o objeto com modelo
document_type = ixml_type->create_document( ).
*Cria o cabeçalho encoding="iso-8859-1"
encoding_type = ixml_type->create_encoding( byte_order = 0
 character_set = s_encoding_type ).
*Cria o root "DATA_TRANSFER"
element_dtrans_type = document_type->create_simple_element(
 name = cc_dt_trans
 parent = document_type ).
*Cria o node "METODO_CODIGO" e preenche com um valor passado no L_VALUE
l_value = p_0783.
CONDENSE l_value.
element_dummy_type = document_type->create_simple_element(
 name = cc_metodo_cod
 value = l_value
 parent = element_dtrans_type ).
*Cria o node "XML_IN"
element_xml_in_type = document_type->create_simple_element(
 name = cc_xml_in
 parent = element_dtrans_type ).
ENDFORM. " yf_inicia_criacao_xml
*& Form yf_dummy_roteiro
 text
 -->VALUE(P_0996) text
 -->VALUE(P_0997) text
FORM yf_dummy_roteiro USING value(p_0996)
 value(p_0997).
l_value = p_0996.
CONDENSE l_value.
element_dummy_type = document_type->create_simple_element(
 name = p_0997
 value = l_value
 parent = element_roteiro_type ).
ENDFORM. " yf_dummy_roteiro
*& Form yf_finaliza_xml
 text
FORM yf_finaliza_xml.
*Cria o stream factory
streamfactory_type = ixml_type->create_stream_factory( ).
*Conecta a internal table de XML com o stream factory
ostream_type = streamfactory_type->create_ostream_itable( table = gw_xml_table ).
CALL METHOD ostream_type->set_encoding
 EXPORTING
 encoding = encoding_type.
*Rendering the document
renderer_type = ixml_type->create_renderer( ostream = ostream_type
 document = document_type ).
l_rc = renderer_type->render( ).
*Salva o documento XML
l_xml_size = ostream_type->get_num_written_raw( ).
ENDFORM. " yf_finaliza_xml
*& Form yf_exporta_xml
 text
 -->VALUE(P_0783) text
FORM yf_exporta_xml USING value(p_0783).
CONCATENATE cod_cartaorepom
 sy-datum
 sy-uzeit
 cc_xml
 INTO v_nomearquivo.
CONCATENATE p_0783
 v_nomearquivo
 INTO v_salvaarquivo.
TRANSLATE v_nomearquivo TO UPPER CASE.
*Exporta o XML
CALL METHOD cl_gui_frontend_services=>gui_download
 EXPORTING
 bin_filesize = l_xml_size
 filename = v_salvaarquivo
 filetype = cc_bin
 CHANGING
 data_tab = gw_xml_table
 EXCEPTIONS
 OTHERS = 24.
IF sy-subrc = 0.
 PERFORM yf_sapgui_progress_indicator USING cc_msg_xml_ok.
ELSE.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " yf_exporta_xml
*& Form yf_convert_xml_to_itab
 text
 -->P_GW_XML_NODE_RET text
 -->P_FILENAME text
FORM yf_convert_xml_to_itab TABLES p_gw_xml_node_ret LIKE gw_xml_node
 USING p_filename.
DATA l_count.
ixml_type = cl_ixml=>create( ).
Now Create Stream Factory
streamfactory_type = ixml_type->create_stream_factory( ).
CALL METHOD cl_gui_frontend_services=>gui_upload
 EXPORTING
 filename = p_filename
 filetype = cc_bin
 IMPORTING
 filelength = l_xml_size
 CHANGING
 data_tab = gw_xml_table2
 EXCEPTIONS
 OTHERS = 19.
IF sy-subrc = 0.
 istream_type = streamfactory_type->create_istream_itable( table = gw_xml_table2
 size = l_xml_size ).
 document_type = ixml_type->create_document( ).
 parser_type = ixml_type->create_parser( stream_factory = streamfactory_type
 istream = istream_type
 document = document_type ).
 IF parser_type->parse( ) NE 0.
 IF parser_type->num_errors( ) NE 0.
 l_count = parser_type->num_errors( ).
 ENDIF.
 ENDIF.
 CALL METHOD istream_type->close( ).
 CLEAR istream_type.
 node_type = document_type.
 PERFORM yf_get_data USING node_type.
 p_gw_xml_node_ret[] = gw_xml_node[].
 CLEAR gw_xml_node[].
ENDIF.
ENDFORM. " yf_convert_xml_to_itab
*& Form yf_get_data
 text
 -->VALUE(X_NODE) text
FORM yf_get_data USING value(x_node) TYPE REF TO if_ixml_node.
DATA: indent TYPE i.
DATA: ptext TYPE REF TO if_ixml_text.
DATA: string TYPE string.
DATA: temp_string(100).
CASE x_node->get_type( ).
 WHEN if_ixml_node=>co_node_element.
 string = x_node->get_name( ).
 w_nodetext = string.
 CLEAR string.
 string = x_node->get_value( ).
 IF NOT w_nodetext IS INITIAL OR
 NOT string IS INITIAL.
 gs_xml_node-node = w_nodetext.
 gs_xml_node-vlnode = string.
 IF NOT gs_xml_node-vlnode IS INITIAL.
 APPEND gs_xml_node TO gw_xml_node.
 CLEAR gs_xml_node.
 ENDIF.
 ENDIF.
ENDCASE.
Get the next child
x_node = x_node->get_first_child( ).
Recurse
WHILE NOT x_node IS INITIAL.
 PERFORM yf_get_data USING x_node.
 x_node = x_node->get_next( ).
ENDWHILE.
ENDFORM. "yf_get_data

Merging two xml files into single xml file

i hav to merge 2 xml files in to single xml file
my xml files are
input1.xml
<?xml version="1.0"?>
<PreVCD>
<component name="stack">
<subpath path="stack_environment">
<variable var="ins" symbol="!" wireonbus="1"/>
</subpath>
</component>
<dump>
<time t="0">
<data>
<symbol sign="!" value="0"/>
</data>
</time>
<time t="10">
<data>
<symbol sign="!" value="1"/>
</data>
</time>
<time t="25">
<data>
<symbol sign="!" value="0"/>
</data>
</time>
</dump>
</PreVCD>
input2.xml
<?xml version="1.0"?>
<PreVCD>
<component name="stack">
<subpath path="stack_behavior">
<variable var="i" symbol="@" bussize="1"/>
</subpath>
</component>
<dump>
<time t="0">
<data>
<symbol sign="@" value="0"/>
</data>
</time>
<time t="5">
<data>
<symbol sign="@" value="1"/>
</data>
</time>
<time t="10">
<data>
<symbol sign="@" value="0"/>
</data>
</time>
<time t="20">
<data>
<symbol sign="@" value="1"/>
</data>
</time>
</dump>
</PreVCD>
The ouput should look like:
<PreVCD>
<component name="stack">
<subpath path="stack_behavior">
<variable var="i" symbol="@" bussize="1"/>
</subpath>
<subpath path="stack_environment">
<variable var="ins" symbol="!" wireonbus="1"/>
</subpath>
</component>
<dump>
<time t="0">
<data>
<symbol sign="@" value="0"/>
<symbol sign="!" value="0"/>
</data>
</time>
<time t="5">
<data>
<symbol sign="@" value="1"/>
</data>
</time>
<time t="10">
<data>
<symbol sign="@" value="0"/>
<symbol sign="!" value="1"/>
</data>
</time>
<time t="20">
<data>
<symbol sign="@" value="1"/>
</data>
</time>
<time t="25">
<data>
<symbol sign="!" value="0"/>
</data>
</time>
</dump>
</PreVCD>
thanks for any advice

Merge xml documents with the xslt document() function.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet
version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" />
<xsl:template match="/">
<xsl:copy-of select="*"/>
<xsl:copy-of select="document('input2.xml')"/>
</xsl:template>
</xsl:stylesheet>

Batching of multiple IDOCs into 1 IDOC-XML file

Hi PI experts,
I would like to send all idocs from the same payment run (based on run date & run id) as 1 idoc-xml file to PI.
The number of idocs is variable depending on the payment run.
Is this possible without using ccBPM?
I understand it can be achieved according to /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm by using FILE adapter. But I don't want to save the idocs into a file system and the number of records in a file is also fixed.
Is there other alternative solution?
Thanks,
Ken.

Hi Michal,
Yes, I have seen your blog and also would like to use the IDoc packaging feature which comes with 7.0 EHP1 onwards, but I am not sure whether the IDoc collecting can be based on the payment run date and run id.
The sending of the collected IDocs is based on when the program RSEOUT00 is executed.
If we perform 2 separate payment runs before the RSEOUT00 is executed, would PI receive 2 Idoc-XML files or 1 combined Idoc-XML file. We would like to receive 2 separate XML files.
Hope you can confirm this.
Thanks.

C# Split xml file into multiple files

Below i have an xml file, in this file, i need to split this xml file into multiple xml files based on date column value,
suppose i have 10 records with 3 different dates then all unique date records should go into each file . for ex here i have a file with three dates my output should get 3 files while each file containing all records of unique date data. I didn't get any idea
to proceed on this, thats the reason am not posting any code.Needed urgently please
<XML>
<rootNode>
<childnode>
<date>2012-12-01</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-01</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-02</date>
<name>SSS</name>
</childnode>
<childnode>
<date>2012-12-03</date>
<name>SSS</name>
</childnode>
</rootNode>
</XML>

Here is full code:
using System.Xml.Linq;
class curEntity
public DateTime Date;
public string Name;
public curEntity(DateTime _Date, string _Name)
Date = _Date;
Name = _Name;
static void Main(string[] args)
XElement xmlTree = new XElement("XML",
new XElement("rootNode",
new XElement("childnode",
new XElement("date"),
new XElement("name")
string InfilePath = @"C:\temp\1.xml";
string OutFilePath = @"C:\temp\1_";
XDocument xmlDoc = XDocument.Load(InfilePath);
List<curEntity> lst = xmlDoc.Element("XML").Element("rootNode").Elements("childnode")
.Select(element => new curEntity(Convert.ToDateTime(element.Element("date").Value), element.Element("name").Value))
.ToList();
var unique = lst.GroupBy(i => i.Date).Select(i => i.Key);
foreach (DateTime dt in unique)
List<curEntity> CurEntities = lst.FindAll(x => x.Date == dt);
XElement outXML = new XElement("XML",
new XElement("rootNode")
foreach(curEntity ce in CurEntities)
outXML.Element("rootNode").Add(new XElement("childnode",
new XElement("date", ce.Date.ToString("yyyy-MM-dd")),
new XElement("name", ce.Name)
outXML.Save(OutFilePath + dt.ToString("yyyy-MM-dd") + ".xml");
Console.WriteLine("Done");
Console.ReadKey();

Collect data from a dynamic XML file into multiple internal tables

I need to convert the XML file into multiple internal tables. I tried many links and posts in SDN but still was facing difficulty in achieving this. Can some one tell me where I am going wrong.
My XML file is of the following type.It is very complex and the dynamice.
The following tags occur more than once in the XML file. The "I" and "L" tags and its child tags can occur ones or more than once for each XML file and it is not constant. i.e in one file they can occur 1 time and in another they can occur 100 times.
"I" and "L" are child tags of <C>

 <J>10</J>
 <K>EN</K>

<L>
 <J>20</J>
 <N>BB</N>
</L>
Tags <C> and <F> occur only ones for each XML file. <C> is the child tag of "A" and "F" is the child tag of <C>.
I need to collect <D>, <E> in one internal table ITAB.
I need to collect <G>, <H> in one internal table JTAB.
I need to collect <J>, <K> in one internal table KTAB.
I need to collect <J>, <N> in one internal table PTAB.
Below is the complete XML file.
?xml version="1.0" encoding="iso-8859-1" ?>
<A>
 
 <C>
 <D>RED</D>
 <E>999</E>
 <F>
 <G>TRACK</G>
 <H>PACK</H>
 </F>
 
 <J>10</J>
 <K>EN</K>
 
 
 <J>20</J>
 <K>TN</K>
 
 
 <J>30</J>
 <K>KN</K>
 
 <L>
 <J>10</J>
 <N>AA</N>
 </L>
 <L>
 <J>20</J>
 <N>BB</N>
 </L>
 <L>
 <J>30</J>
 <N>CC</N>
 </L>
 </C>
</A>
With the help of SDN I am able to gather the values of <D> <E> in one internal table.
Now if I need to gather
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
I am unable to do. I am following XSLT transformation method. If some one has some suggestions. Please help.
Here is my ABAP program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\TEMP\ABCD.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ITAB,
 D(10) TYPE C,
 E(10) TYPE C,
 END OF ITAB.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_ITAB TYPE STANDARD TABLE OF ts_ITAB,
 gs_ITAB TYPE ts_ITAB.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
 gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
 gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
 filename = gs_file
CHANGING
 data_tab = gt_itab1
EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 not_supported_by_gui = 17
 error_no_gui = 18
 OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IITAB".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'IITAB'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
 CALL TRANSFORMATION zxslt
 SOURCE XML gt_itab1
 RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
 gs_var_text = gs_rif_ex->get_text( ).
 MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Now let's see what we got from the file
LOOP AT gt_ITAB INTO gs_ITAB.
WRITE: / 'D:', gs_ITAB-D.
WRITE: / 'E :', gs_ITAB-E.
ENDLOOP.
Transformation
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <IITAB>
 <xsl:apply-templates select="//C"/>
 </IITAB>
 </asx:values>
 </asx:abap>
</xsl:template>
<item>
 <D>
 <xsl:value-of select="D"/>
 </D>
 <E>
 <xsl:value-of select="E"/>
 </E>
 </item>
</xsl:template>
</xsl:transform>
Now the above pgm and transformation work well and I am able to extract data into the ITAB. Now what changes should I make in transformation and in pgm to collect
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
Please help..i am really tring hard to figure this out. I am found lot of threads addressing this issue but not my problem.
Kindly help.
Regards,
VS

Hi Rammohan,
Thanks for the effort!
But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields. I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
Moreover I have about 10 such work areas. so the effort would be ten times the above effort! I want to avoid this! Please help!
I would be very grateful if you could provide an alternative solution.
Thanks once again,
Best Regards,
Vinod.V

Insert Insert XML file into multiple records in Oracle Database

I would like to find out if it is possible to insert a single XML file into multiple records or tuples in a Oracle database table. I have a single XML file which is at multiple levels. The meta data for the levels are common and each level can have meta data of their own in addition. I do not have any meta data field which will uniquely determine whether the data belongs to Root level, Intermediate level or at the document level. Is there any way I can determine which level the meta data belongs to and thereby make a corresponding entry into the database table tuple? For example I could have an attribute called level which is going to be present only in the database table and not in the XML file. If level=1 then it corresponds to "Root" meta data, if level=2 then it corresponds to "Intermediate" level and if level=3 then it corresponds to meta data at document level. I need a way to calculate the value for level from the XML file and thereby insert the meta data element into a tuple in a single table in Oracle.

Hi,
extract your xml and then you can use insert all clause.
here's very small example on 10.2.0.1.0
SQL> create table table1(id number,val varchar2(10));
Table created.
SQL> create table table2(id number,val varchar2(10));
Table created.
SQL> insert all
2 into table1 values(id,val)
3 into table2 values(id2,val2)
4 select extractValue(x.col,'/a/id1') id
5 ,extractValue(x.col,'/a/value') val
6 ,extractValue(x.col,'/a/value2') val2
7 ,extractValue(x.col,'/a/id2') id2
8 from (select xmltype('<a><id1>1</id1><value>a</value><id2>2</id2><value2>b</value2></a>') col from dual) x;
2 rows created.
SQL> select * from table1;
 ID VAL
 1 a
SQL> select * from table2;
 ID VAL
 2 b Ants

IDOC testing: how to upload sample IDOC xml file while outbound IDOCtesting

Hi experts,
can any one tell me , how to upload a sample XML idoc xml(data) file while Outbound IDOC testing;
in WE19 tcode ( insted of manually entering the sample data, i have to import the sample XML/text file into the idoc fields). say IDOC is MATMAS.
Thanks in advance;
Kumar

Hi Asit Purbey,
can you clearly explain, how to upload the file and how can i genetare the IDOC no?
i have seen that function module IDOC_XML_FROM_FILE, in that it is required a port no, what exactly it is, and what type of port is it?
suppose i am having a XML/TEXT file with IDOC data, how can i upload it into the server and how can convert it into the IDOC and how can i generate the IDOC no for outbound testing?
Thanks,
Anil

Load multiple parts of an XML file into one dynamic Text Field

Hi I am trying to load text from an external XML file into a dynamic text box. I have so far managed to load single parts of the XML file into a dynamic text field. I now want to be able to load different parts of the XML file (something similar to a string with appendText) into the same text Field.
I have so far managed to achive this using the String and append text properties, but would like to use XML file to do it instead.
Any tips please?
Thanks

In essence you can just do:
TextField.text = XML.node1 + XML.node2;

Merge multiple pdf files into single pdf

How to merge multiple pdf files into single pdf file through any programmatic languages? Kindly share with me.
Thanks

Easy PDF
http://www.macupdate.com/app/mac/38090/easy-pdf
How To: Combine multiple PDFs in Preview
http://macenstein.com/default/2011/12/how-to-combine-multiple-pdfs-in-preview/
How to merge pdf files in OSX
http://macintoshhowto.com/leopard/how-to-merge-pdf-files-with-preview-in-leopard .html
How to Combine Multiple PDFs Using Preview
http://www.macobserver.com/tmo/article/how_to_combine_multiple_pdfs_using_previe w/

How can we configure or control records go into single idoc thru BODS?

Hi,
Our case is -
IDOC format has three segment. Each segments has child nodes -
1. CONTROL SEGMENT - This is required only once per idoc.
child1
child2
2. SEGMENT1 - sinlge source record to be broken into two segments.
child1
child2
3. SEGMENT2 - sinlge source record to be broken into two segments.
child1
child2
we have a single source (lest say having 100 records).
In the current design which does generates IDOCS but as many as the no of records in source. Currently we use a row generation transform as dummy (with row count as 1) to pass to the IDOC parent nodes's from clause to escape the error - invalid input to the parent nodes.
Child nodes are either mapped to the source table or are null.
Question - How can we configure this in a way that we control how many records go into single idoc. Ex - lets say 50 per idoc so only 2 idoc should be created if 100 records are there.

HI,
this sounds to me like Data Services. If so I would suggest to post this into the Data Service forum.
regards
Ingo HIlgefort

Need to Load data in XML file into multiple Oracle tables

Experts
I want to load data that is stored at XML file into multiple Oracle table using plsql.
I am novice in this area.Kindly explain in depth or step by step so that i can achive this.
Thanks in advnace.

Hi,
extract your xml and then you can use insert all clause.
here's very small example on 10.2.0.1.0
SQL> create table table1(id number,val varchar2(10));
Table created.
SQL> create table table2(id number,val varchar2(10));
Table created.
SQL> insert all
2 into table1 values(id,val)
3 into table2 values(id2,val2)
4 select extractValue(x.col,'/a/id1') id
5 ,extractValue(x.col,'/a/value') val
6 ,extractValue(x.col,'/a/value2') val2
7 ,extractValue(x.col,'/a/id2') id2
8 from (select xmltype('<a><id1>1</id1><value>a</value><id2>2</id2><value2>b</value2></a>') col from dual) x;
2 rows created.
SQL> select * from table1;
 ID VAL
 1 a
SQL> select * from table2;
 ID VAL
 2 b Ants

Multiple log4j.xml files for single application.

Hi All,
How to use multiple log4j.xml files for single application?
I do have a pluggable application modules. ie, If I add a jar I will get some functionalities. Like that i do have many jars.
Log4j.xml also will be present in that jar only. So if I add multiple jar files like this, I will get multiple log4j.xml files. What should I do?

Each logger can have its own file I think. Check the log4j documentation.

Splitting multiple IDoc XML files into single IDoc messages for R/3

Similar Messages

Maybe you are looking for