Problem in IDOC to SOAP Scenario

Hi All,
we have an IDOC to SOAP scenario in which we have got WSDL from the client for the targets.. Please let us know the WSDL would be the message type and we need to create interface for it . Also the SOAP header is not appearing in the target xml.
Thanks

Hi ,
This means when the data is sent to the webservice it will contain the SOAP header just that we cannot see it in Moni . Also
What about the acknowledgement . Our message is successfull but with message that awaiting acknowledgement.
What we basically need a synchronous scenario of IDOC to SOAP but the response not going back to SAP-R3 . We recieve the response only in SAP-PI. Saw some blogs but the message is going back to SAP-R3. Please help us on this
Thanks
Edited by: vishal gadkari on Aug 22, 2009 4:15 PM

Similar Messages

IDoc to SOAP scenario is showing error

Dear Experts,
We were trying a scenario which is IDoc-XI 3.0->SOAP and where the WebService is situated outside our office network. Our network team have bypassed proxy for accessing that WebService URL and the same is accessible from our XI3.0 application server from browser. We have configured the scenario and when we have tested the scenario from RWB->Component M onitoring->Integration Engine->Test and this has worked fine. But when we have tested the scenario by triggering IDoc from the R/3 system, it is throwing the below mentioned error in both at the comm chanel and at the SXMB_MONI acknowledgement.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 403 Service Error
points to be noted here:
1. Business Service has been configured correctly for triggering ALEAUD messages and ALEAUD messages are reaching R/3 successfully.
2. We have chosen option Keep Headers and Do not use SOAP header options.
3. We are passing some values to the SOAP Header from SOAP channel.
Please could somebody help us on the root cause of the error message.
We have run report IDX_NOALE for that particular IDoc so that it doesn't return any acknowledgement back to the R/3 system.
Thanks and regards,
Sugata
Edited by: Sugata Basu on Nov 19, 2011 12:40 PM

Dear,
IDoc to Soap scenario we have to import wsdl at receiver end and map the field from the mapping document but some times receiver end some changes may happen. if it is correct only your mapping we have to conclude from the below points.
1. Check the mapping in Message Mapping and Operation Mapping Test and conclude.
2. you should check url from receiver that is correct or wrong.
3. ask the wsdl from receiver end.
the given ED and receiver side application is same this type of error will not come.
Please check at receiver application or else what ever new fields are added in reciver may be miss mach of ED.
Regards,
Kiran Polani

Idoc to soap scenario - soap response error

hi
i am using pi 731 single stack.
the scenario is idoc to soap. the message mapping is working fine and output is generated successfully.
the message is failing in mesage monitor and communication channel monitor. error is -
Exception caught by adapter framework: SOAP: Response message contains an errorXIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: VEN-OMI-1007:
This scenario is async scenario. How to soap remove this response message error.
rgds

Dear,
IDoc to Soap scenario we have to import wsdl at receiver end and map the field from the mapping document but some times receiver end some changes may happen. if it is correct only your mapping we have to conclude from the below points.
1. Check the mapping in Message Mapping and Operation Mapping Test and conclude.
2. you should check url from receiver that is correct or wrong.
3. ask the wsdl from receiver end.
the given ED and receiver side application is same this type of error will not come.
Please check at receiver application or else what ever new fields are added in reciver may be miss mach of ED.
Regards,
Kiran Polani

Explain about Idoc to soap scenario

Hi All,
I am beginner to sap pi can anybody help me out, How to perform Idoc to soap scenario...

Dear Gaffar,
Please use the search functionality to learn.
Redirecting...
http://www.google.com/cse?cx=013447253335410278659%3Ak8ob9ipscwg&ie=UTF-8&q=idoc+to+soap+scenario&siteurl=www.google.com…
try out the scenario,create the thread if you face any issues.

IDOC to SOAP scenario and transport process

Scenario:-IDOC to SOAP:
We got the WSDl file from Target system and our current scenario is working perfectly fine in Dev.
Requirement:
I have to send the same IDOC to two different SOAP target system with different SOAP URL WSDL structure is same only the URl differ.
Solutions which I thought of:
1) Separate Design for both the scenarios in IR and one CS with two SOAP channel, interface and receiver determination and agreement.
2) Use the same WSDL file structure for both the case. this will avoid the separate IR configuration. in this case there will be common MM,IM. In ID the configuration will remain the same as the case one.
In 2 case I would like to know whether I can use the WSDL file which has the details of first SOAP target for the second SOAP target. Will this WSDL file act simply as structure? Does the URL mentioned in the WSDL file will create any problem?
Transport process:
SOAP WSDL file has different URL for DEV,QA and PROD. when I transport the IR from Dev to QA the Dev WSDl file will be reflected in QA as external definition, I wanted to know what is the best method to do the transport in the above situation.
Solution which I thought of
1) Go to QA IR and import the QA WSDL file.
2) Go to Dev and import the WSDl file of QA and import it in QA which avoids manual import in QA, if I go by this way will this affect the testing of my interfaces in Dev system.
What is the best method we do the transport for the above scenario.
Need ur suggestions?
chirag
Edited by: Chirag Gohil on Oct 1, 2008 1:29 PM

Hi Chirag,
As far as i know there wil not be any target URL in the WSDL File which we bought from the webservice application.
Can u please paste the WSDL File which u have .....
If we come to Dynamic URL Config means, as per my concern
You have only 2 Target locations to receive the Idoc. so its better to go a head with ur existing approch itself.
Why becase for Dynamic URL Config.....
we have to maintain the target URL's in One Table and need to use RFC lookup to pick this URL Dynamically based on some value from the Input file.
And also we need to use Standard UDF code for Dynamic config in Mapping .
And need to check the option Use ASMA in the Receiver SOAP CC.
Regards
Seshagiri

IDOC to SOAP Scenario : Connection Refused

Hi Everybody,
I am working on Idoc to SOAP Asynchronous scenario.
I have an issue with the connection from SOAP to the websystem at the receiver.
Around 60% of the messages are processed successfully and the rest of the messages throws up errors at the receiver Adapter.
Below is the log from Communication channel for the unsuccessful messages.
Message processing started
request entering
SOAP: call failed: java.io.EOFException: Connection closed by remote host.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Connection closed by remote host.: java.io.EOFException: Connection closed by remote host.
Is there any setting we need to make for the SOAP adapter to reduce these failures?
Or is it a problem with the receiver websystem?
Can somebody help me out on this?
Thanks & Regards,
Zabiulla

Hi,
For some reason the client (from the server's point of view - it might be some other device between the actual client and the server) is closing connection during the SSL handshake. As we can't get more info from the standard J2EE Dispatcher log files, we need more detailed info.
Please check
1. Execute network router trace utility (tracert for Windows systems or traceroute for UNIX flavours) to the J2EE Engine's host. It will show the active and non stealth routers between the client and the server:
c:\> tracert [J2EE_host] (windows)
$ traceroute [J2EE_host] (UNIX)
2. Activated low level SSL tracing
regards
Aashish Sinha

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

Problem in idoc to file scenario

hi
while creating the idoc to file scenario i am facing few problems.
1) My design time objects are working fine. i have checked my message mapping, message interface etc.. (all design time objects are in active mode).
2) In ID, i have tested my configuration in test configuration, its working fine there as well (in ID i am using 2 business service one for sender, one for receiver)
3) i am using my ecc6 training server as my sender and using my XI server as receiver.
4) i am sending idoc from ecc6 and converting it to file in XI server and saving it in XI server itself(my receiver in this case).
my error:
i send my idoc from we19 transaction, and i see a error message stating
that 'RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC'
my doubts.
1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
kindly help me with this issue.
regards
manoharan

>
manoj murugesan wrote:
> 1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
>
> 2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
>
> 3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
>
>
> kindly help me with this issue.
>
>
> regards
> manoharan
and to 1 & 2 ref. below,
Configuration steps required for posting idoc's(XI) -
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
ALE configuration for pushing idocs from SAP to XI -
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
3. NFS protocol is used to read/write files to the XI server itself. If you have to write to a local machine then use FTP

IDOC to SOAP Scenario

Hi All
Scenario is IDOC to SOAP.
As there is SOAP as a receiver side I asked to client to provide me WSDL file so that I can import into my PI. But Client sent me a BAPI structure instead of WSDL file.
So I want to ask is this posible to implement receiver SOAP using BAPI.
Regards
Dheeraj Kumar

Hi,
>>>Receiver side is portal so how come I can use RFC adapter?
portal has nothing to do with bapis - it's a display later for documents from the backend system (if we're talking about SAP)
so instead of doing a SOAP call you can use RFC adapter to connect directly to the "BAPI" engine - which is ERP
if you want to use SOAP - you need a WSDL - but the WSDL can be generated from BAPI too (keep that in mind)
Regards,
Michal Krawczyk

Problem with IDOC TO FILE Scenario

Hi Experts,
I am doing IDOC TO FILE Scenario.
I have done all the configuration.I have cretaed RFC,PORT,LS and Partner profile at both R/3 and
XI Side.
when I am trying to generate IDOC using we19 and I put the r/3 port,partner in sender and XI
port and partner in receiver it gives me error as "Port 'SAPCU6_100' does not exist in the table
of port descriptions.
Please help me.....
Regards

HI Saras,
Please go through the below weblog which has all the stpes which is required for ur scenario...I think screen by screen help u to debug ur problem and it will help u to find out the msitake which u have made.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

Problem in Idoc to JDBC scenario(uses BPM)

Hi
I have a IDoc to JDBC scenario which also uses BPM.
The JDBC adapter has to execute a Stored procedure on Sybase database.
I work on XI3.0 SP14.
When I am sending IDoc to XI it is failing in CALL adapter step.
The error message is "Unable to convert sender service TruckLiftAccountUpdate to an ALE logical system".
However this scenario is working in Production with same settings.But it is not working in Quality and it is giving the above error.
Can any one help me in this.
Thanks in advance.
KP

Thanks for your quick reply..
All the settings are in place.
Here the Idoc is coming to BPM and BPM cant able to execute the stored procedure.and we are getting the error from BPM to target system.
Here error is unable to convert the sender service(from BPM service) to ALE
logical system.
same settings are there in Production but it is not working in QA.
Thanks in adavnce,
KP

Unable to convert sender service for IDoc to SOAP Scenario

Hi,
I tried to find the solution my way and by using the search function but without any success. I have the folowing scenario:
SYS(my sap system) => IDoc => PI (Process Integration) => SOAP => XML
When i send the IDoc to the PI System and open SXI_Moni the folowing error is shown:
"Unable to convert the sender service receiver_service to an ALE logical system"
I read about Adapter Specific Identifies so i go to ID->Service without partner->Business System->MyBusinessSystem(SYS) then in Menü on Services and checked Adapter Specific Identifies. They are like maintained in SLD.
Next is a Cache refresh i tried a full one but no impact
Then i tried a header mapping in receiver agreement. I mapped there the receiver party to the definied receiver party and the receiver_service to the service.
I have no idea
Thanks for help, be sure that helpful answers will be awarded
regards
Matthias
P.S. What causes this error ? For my opinion ALE has already done all neccesary things (The Idoc is in PI System and the data is available in mesaage payload) so why didn't the pi map it and send it via Soap?

Hi Matthias
>>I dont know if its helpful but in SLD are only the system of our landscape so i have no entry for the external Party.
Party information is generally not required to be maintained in SLD
>>Adapter Specific Identifies
What is the value you have given for sender Business system->adapter specific identifier. Is it the same as the partner profile name in sender SAPECC. if not try making them same.
Regards
Suraj

Mapping Problem in IDOC to XML scenario

hi,
In the target i have a tag which says:
Extrinsic 0..unbounded
name required
I have to map the above target to a source which comes from different IDOC segments.
E.g.
if E1EDP17.Qualf = '002' then map the E1EDP17.lktext to the "name"
if E1EDP17.Qualf = '001' then map the E1EDP17.lktext to the Extrinisc.
If data resides in other segments, how would i map those segments to the same output in xml.
Example:
<Extrinsic name="a">test</Extrinsic> -> this comes from E1EDP17 segment
<Extrinsic name="a">test</Extrinsic> -> comes from segment A
<Extrinsic name="a">test</Extrinsic> -> comes from segment B
How can i use a single Target to map from different sources if they are in different segments?
Any tips?
Thanks,
KP
Message was edited by: Tirumal Kumar Pappu

Tirumal,
U will have to use comination of node functions like exists and mapWithDefault.
Are you sure that, E1EDP17.Qualf will have the value '002' or '001'.
There are some very good blogs on mapping by Sravya. Go through them and also go through the following link.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">sap help for Mapping</a>
Please reward if helpful

IDOC to SOAP asynchronous scenario Error handling

Need an expert!!!!!!!!! advise on error handling for IDOC--PI--
SOAP scenario.This is a asynchronous scenario where PI is calling a Legacy system using SOAP adapter.My question is how i can do error handling in this scenario.If i get an alert in pi with payload variable that would be fine, do i need to use BPM and if that is tthe case what will be steps.
Appreciate your help.
Manish

Hello Manish,
My question is how i can do error handling in this scenario.
Use the standard alert framework. Search on SDN / SAP Help for details.
do i need to use BPM and if that is tthe case what will be steps.
BPM is not required to raise alerts, as this is an async call.
Regards,
Neetesh

Problem with IDoc scenario - IDocs do not aarive to XI

Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.

Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM

Problem in IDOC to SOAP Scenario

Similar Messages

Maybe you are looking for