Problem in importing the type and jobs

Hello ,
Actually i am having problem in importing the jobs and types from a dump ,during import it gives an error for both jobs and types and after the import completes ,when i check the job and type in the schema it does not exist ,,
Kindly give me any suggestion regarding this problem or suggest me any way through which i can import these jobs and types on the same server but in different schema ..or is there any way though which i can make the dump by using export,in which i can exclude the jobs and types in dump file.
Plz reply me as soon as possible..
thanks in advance.
Regards,
Omer.

What can be done in this senario when table name in source and target schema are different.
What other approaches i can follow.
Please let me know.

Similar Messages

A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe.

Hi,
After moving my files from SP 2010 to SP 2013 , for all my web parts i am getting A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe. error. I checked web.config files
and they are there as safe control and trust level is also full.
These webparts work in 2010.
Do i need to tweak something in code or distributed cache to make this thing work? The errors i see are
Error importing WebPart. Assembly c , Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29, TypeName. C. A Web Part or Web Form Control on this Page cannot be displayed or imported. The type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type C Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
An error occurred while attempting to add the gallery item [Custom] c to the page. The error was: Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The
type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29 could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
Adit

Hi Adit,
According to your description, my understanding is that the error occurred when you deployed the .wsp files to SharePoint 2013.
I recommend to check if all the assemblies are put into the BIN and GAC.
If above cannot work, you can check the troubleshooting steps in the link below:
http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=189
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Problems with ESS in "Career and Jobs" in option "Appraisal Document"

hi
My problem with ESS in "Career and Jobs" menu in the option "Appraisal Document" is not appear the appraisal documents or my my question is...
What I can customize for appear the "Appraisal Documents"?
My ESS shows the following screens:
http://img295.imageshack.us/img295/3451/appraisalportal.jpg (there is also a problem with the flash player, I marked with red rectangle)
I found looking on the internet that had to configure the Performance Management
I entered in SPRO tcode, follow these steps
http://img580.imageshack.us/img580/2598/appraisal1.jpg (Entered in "Define Templates in Performance Management")
http://img215.imageshack.us/img215/6233/appraisal2.jpg
http://img651.imageshack.us/img651/4243/appraisal3.jpg
http://img340.imageshack.us/img340/622/appraisal4.jpg
http://img52.imageshack.us/img52/1842/appraisal5.jpg (click in "End Configuration")
http://img534.imageshack.us/img534/8746/appraisal6a.jpg (Error screen part 1)
http://img4.imageshack.us/img4/1261/appraisal6b.jpg (Error screen part 2)
I hope the answers and posts, I wonder if my chosen way(configuring the Performance Managemente) is correct
thanks for posts
Ivan

thanks Chris for comments,
Now I customize the "Appraisal Document"
http://img18.imageshack.us/img18/4640/uiapraisal.jpg (Here I can see the evaluation that was done in the back-end)
but, I clicked in the hiperlink of "Appraisal Document Name", I see this error:
http://img80.imageshack.us/img80/8157/uiapraisal2.jpg (Error:Page not found or not avaible)
even before I saw another error ("There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.") in others posts(questions in sap forums) mentioned, These included the following notes
1468466 Performance Management Launchpad Configuration
1463821 Performance Management Portal Configuration
1416756 OBN Configuration in Performance Management
1408243 Configuration for object-based navigation
They recommended me in the back-end include roles in the resources:
http://img401.imageshack.us/img401/8048/uiapraisala.jpg
http://img689.imageshack.us/img689/9359/uiapraisalb.jpg
The note number 1463821(especially), I recommend the following
<a href="https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1463821" target=nieves>note 1463821</a> (link note)
http://img88.imageshack.us/img88/7484/uiapraisal1.jpg (LPD_CUST tcode)
http://img266.imageshack.us/img266/7405/uiapraisal1b.jpg (Check in "Restricted Parameters" and "Active" - "EXT_HEAD")
but in these notes appointing a role that I could not find on my system that is:
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_wd_ui
because, I was looking at my porta's role (With reference "Appraisals Document")
http://img97.imageshack.us/img97/5167/uiapraisal3a.jpg
http://img413.imageshack.us/img413/5643/uiapraisal3b.jpg
http://img534.imageshack.us/img534/4585/uiapraisal3c.jpg
http://img203.imageshack.us/img203/4605/uiapraisal3d.jpg
Finally, my main error is :Page not found or not avaible (I referred at the beginning of the post http://img80.imageshack.us/img80/8157/uiapraisal2.jpg)
Why I see this error (Page not found or not avaible)?
http://img80.imageshack.us/img80/8157/uiapraisal2.jpg (Error:Page not found or not avaible)
I hope the helps, and thaks very much.
Ivan

The type and the length of the members of the structures

I am making the BC-XAL program.
Reading `XAL_Interface_Documentation_11.pdf', now I succeeded in "Reading All Saved Monitor Sets" and "Reading All Monitors of a Monitor Set". but I can't find the type and the length of the member of the Structure BAPITNDEXT, so I cannot get the Monitoring Tree of a Monitor.
where can I get any documents or information ?

This is how it looks in my 46c system.
MTSYSID         SYSYSID         CHAR      8     0R/3 System, name of R/3 System
MTMCNAME        ALMCNAME        CHAR     40     0Alert: name of monitoring context
MTNUMRANGE      ALTIDNUMRG      CHAR      3     0Alert: monitoring type number range (perm., temp, ...)
MTUID           ALTIDUID        CHAR     10     0ALert: Unique Identifier for Monitoring Types (used in TID)
MTCLASS         ALTIDMTCL       CHAR      3     0Alert: monitoring type class (perf., single msg.,...)
MTINDEX         ALTIDINDEX      CHAR     10     0Alert: internal handle for TID
EXTINDEX        ALTIDINDEX      CHAR     10     0Alert: internal handle for TID
ALTREENUM       ALTREENUM       INT4     10     0Alert: MT Tree info: Number of tree
ALIDXINTRE      ALIDXINTRE      INT4     10     0Alert: Tree Info: Index of MT in Tree
ALLEVINTRE      ALLEVINTRE      INT4     10     0Alert: Tree Info: Level of MTE in Tree
ALPARINTRE      ALPARINTRE      INT4     10     0Alert: Tree Info: Index of Parent of MT in Tree
OBJECTNAME      ALMOBJECT       CHAR     40     0Alert: Name of Monitoring Object
MTNAMESHRT      ALMTNAMESH      CHAR     40     0Alert: Short Name of Monitoring Type
CUSGRPNAME      ALCUSGROUP      CHAR     40     0Alert: Customization: Name of Customization Group
DELIVERSTA      ALDELIVSTA      INT4     10     0Alert: MT Val: Delivery Status
HIGHALVAL       ALVALUE         INT4     10     0Alert: alert value (1 = green, 2 = yellow, ....)
HIGHALSEV       ALSEVERITY      INT4     10     0Alert: severity (alerts, monitoring type custom..)
ALSYSID         SYSYSID         CHAR      8     0R/3 System, name of R/3 System
MSEGNAME        ALMSEGNAME      CHAR     40     0Alert: name of monitoring segment
ALUNIQNUM       ALAIDUID        CHAR     10     0Alert: Unique Identifier to be used in AID (char10)
ALINDEX         ALINDEX         CHAR     10     0Alert: internal handle
ALERTDATE       ALDATE          DATS      8     0Alert: date
ALERTTIME       ALTIME          TIMS      6     0Alert: Time value in timeformat
DUMMYALIGN      ALDUMMYC2       CHAR      2     0Alert: Dummy field. Purpose: Alignment of date/time 16 byte
LASTVALDAT      ALDATE          DATS      8     0Alert: date
LASTVALTIM      ALTIME          TIMS      6     0Alert: Time value in timeformat
LASTVALDUM      ALDUMMYC2       CHAR      2     0Alert: Dummy field. Purpose: Alignment of date/time 16 byte
ACTUALVAL       ALVALUE         INT4     10     0Alert: alert value (1 = green, 2 = yellow, ....)
ACTUALSEV       ALSEVERITY      INT4     10     0Alert: severity (alerts, monitoring type custom..)
VALSYSID        SYSYSID         CHAR      8     0R/3 System, name of R/3 System
VMSEGNAME     ALMSEGNAME     CHAR     40     0     Alert: name of monitoring segment
VALUNIQNUM     ALAIDUID     CHAR     10     0     Alert: Unique Identifier to be used in AID (char10)
VALINDEX     ALINDEX     CHAR     10     0     Alert: internal handle
VALERTDATE     ALDATE     DATS     8     0     Alert: date
VALERTTIME     ALTIME     TIMS     6     0     Alert: Time value in timeformat
VALERTDUM     ALDUMMYC2     CHAR     2     0     Alert: Dummy field. Purpose: Alignment of date/time 16 byte
COUNTOFACT     ALCNTACTAL     INT4     10     0     Alert: MT Val: Count of active Alerts
COUNTSUM     ALCNTSUMAL     INT4     10     0     Alert: MT Val: Sum of Alerts in MT
VISUSERLEV     ALVISILEVL     INT4     10     0     Alert: MTE type dev cust: Visible on user level (op,exp,dev)
TDSTATUS     ALTDSTATUS     INT4     10     0
     Alert: MT: Type Def Status
Welcome to SDN.
Regards,
Rich Heilman

I accidently click on ''Import the list'' but now all the music have an exclamation point I think they are all in Musique.txt on the desk... How can i take back these music on my library? I tried : Import the list and take Music.txt , but it do not work

I accidently click on ''Import the list'' but now all the music have an exclamation point I think they are all in Musique.txt on the desk... How can i take back these music on my library? I tried : Import the list and take Music.txt , but it do not work

Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again.

Is it possible to export and import the roles and users tables?

Hi,
is there any possibility to export and import the role and user definitions?
We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
And now I'm searching for a fast and efficient way of managing the roles and users.
Thanks and Regards, Melanie

Hi Melanie,
There is no export/import functionality for roles and users. The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs. Both APIs expose functionality to create, update and delete roles and users.
Hope this helps,
Richard

Problems with importing .MP4 file and the audio in FCP 6

Hi all,
I am pretty new to Final Cut Pro and have just approached my first project.
I have a Samsung VP-MX20
http://www.samsung.com/uk/consumer/detail/spec.do?group=cameracamcorder&type=cam corder&subtype=flashcamcorder&model_cd=VP-MX20/XEU&fullspec=F
*Codecs H.264, AAC.*
I needed some space on the camera so halfway through a holiday i transfered all the video files from the camera to my Laptop.
I have imported these files from the hardrive
Vid rate - 25 fps
compressor - H.264
Pixel Aspect - PAL - CCIR 601
What seems to be the problem is ok when i drag the clip from the viewer to the canvas and apply insert, i get the box that says 'Change Sequence settings to match the clip settings?
i click yes and when the clip is layed out on the timeline there is a red line above the timeline, when i play the clip i only get bleeps as audio and not the original sound.
If i drag the playhead i can hear the audio but if i try to play all i hear us bleeps plus if i import an mp3 the red line appears above the timeline and the same applies
can anyone help me here.
Thanks
Elles

Hi Zak,
many thanks for your reply, i have contacted Apple and taking your advice and using compressor i have converted the codec H.264 to Apple Pro Res 422 for interlaced material.
I have imported this file and when i drag once again from the viewer to canvas i get the standard box asking to change the sequence to match the clip.
I am still getting the red line above the timeline and bleeping as audio.
any idea?

Problem while importing the application in application express 3.0

Hi Friends
We have developed an application in a workspace say X. I imported the complete application in different workspace Y and the import was successfully. Now if I export a single page from that application in workspace X and import in workspace Y, then it gives me error as
"This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application."
Also I tried changing the application id in the export file but did not work.
Is their a workaround for this?
(We are using application express 3.0.0.00.20)
Thanks
Minakshi

Hi Scott
1 ) Page exports are to be imported into an application having the same ID as the source application in the same named worskpace.
But the problem is I cannot have same application id in the same workspace or in different workspaces even. I exported the complete application from workspace X with application id as 555 and tried importing the application in workspace Y with the same application id. But that does not work since it throws the error message as the same application id cannot reside in 2 different workspaces.
2) You don't say whether workspaces X and Y are in the same or different databases.
Both the workspaces X and Y are in the same database. The database user/schema that is associated with workspaces X and Y are different.
3) Also I tried changing the application id in the export file but did not work.
Following is the extract of the page that i tried importing. The places wherever it is marked BOLD, i modified them in the original page export sql file.
--application/set_environment
prompt APPLICATION 500 - Load_Factor_System
-- Application Export:
-- Application: 500
-- Name: Load_Factor_System
-- Date and Time: 15:52 Wednesday May 16, 2007
-- Exported By: ADMIN
-- Flashback: 0
-- Export Type: Page Export
-- Version: 3.0.0.00.20
-- SET APPLICATION ID
wwv_flow.g_flow_id := 500;
wwv_flow_api.g_id_offset := 0;
null;
In case you need further clarifications, please let us know.
Regards
Minakshi

Problem in importing the database

Hi
my team is new to htmldb..I am doing one module in a stand alone system and my teammate is doing another module in anothe system..I want to import my database into my teammate system..i used sql script for importing...But when I run the script..it gives me the following error...
unable to import script . Application ID and current security group id are not consistent...
Can anyone say what is the problem?
Fazila

when I run the script(got by uploading from another system),it gives me the following code..
Numbersort by this column Elapsed Statement Feedback Rows
1 0.06 begin wwv_flow.g_import_in_progress := true; end; Statement processed. 1
2 0.08 begin -- Assumes you are running the script connected to Statement processed. 1
3 0.02 begin wwv_flow.g_import_in_progress := true; end; Statement processed. 1
4 0.01 begin select value into wwv_flow_api.g_nls_numeric_chars fr Statement processed. 1
5 0.00 begin execute immediate 'alter session set nls_numeric_chara Statement processed. 1
6 0.00 begin wwv_flow.g_browser_language := 'en-us'; end; Statement processed. 1
7 0.00 begin -- This date identifies the minimum version required Statement processed. 1
8 0.00 begin wwv_flow.g_user := nvl(wwv_flow.g_user,'COMPTOOL'); en Statement processed. 1
9 0.06 begin wwv_flow_api.g_varchar2_table := wwv_flow_api.empt Statement processed. 1
10 0.03 declare l_name varchar2(255); begin l_name := 'F ORA-20001: Unable to import script. ORA-20001: Application ID and current security group ID are not consistent. -
11 0.02 begin wwv_flow_api.g_varchar2_table := wwv_flow_api.empt Statement processed. 1
12 0.01 declare l_name varchar2(255); begin l_name := 'F ORA-20001: Unable to import script. ORA-20001: Application ID and current security group ID are not consistent. -
13 0.00 begin execute immediate 'alter session set nls_numeric_char Statement processed. 1
Can you say what is the problem? what is type imp help=y to run options for import command ...i dont understand...can you explain?
Fazila

Problems with ESS in "Career and Jobs" option

Hi
In the ESS has problem in Career option (show in the following links)
http://img517.imageshack.us/img517/4193/careerjob1.jpg
http://img200.imageshack.us/img200/4583/careerjob2.jpg
My main target actives the "other options" in my ESS only appear three option (show in the following link)
http://img685.imageshack.us/img685/9900/careerjob3.jpg
thanks for your time and posts
Ivan

Hi Mauricio
My problem exacly is that the only option that I work for "Career and jobs" is "Skills Profile" (http://img517.imageshack.us/img517/4193/careerjob1.jpg) and other options such as "Job Favorites" does not work (http://img200.imageshack.us/img200/4583/careerjob2.jpg), also not on the menu of "Career and jobs" (http://img685.imageshack.us/img685/9900/careerjob3.jpg) only three options
I hope your help
thanks for your post and answer
Ivan

Problems with ESS in Career and Jobs in Appraisal Document

HI
Iam Facing a problem in ESS career and job .
in Appraisal documnets
iam using BP ERP5 ESS1.41 sp6
and updated Common parts
My problem here is when i click the appraisal link the page for appraisal is opening with some records.but when i click on that record the appraisal template must be displayed,but my link is displaying an error in that page as page is not found.
i had done required OBN as of SAP NOTE 1416756 , 1408243.but my issue doesnt soleved
iam just postinga screen shot of that error
http://img80.imageshack.us/img80/8157/uiapraisal2.jpg
can u people help me in solving this issue.wat might be the problem and how to get trhe solution
pls help me as iam in very emergency with this issue
Bye
Waiting 4 response

sandeep, im still looking for you to provide the
URL of both pages in your screenshot.
Outside of a weird firewall issue or something, you have 1 of 2 issues.
1. Your OBN Target configuration you did in the notes is wrong. which means the target URL is not pointing to the iview properly.
2. Your iview for the sap page called appraisal_document is not in accessible in the correct content area.
here is the location in the standard SAP portal area, not sure if you copied and already using a custom ESS tab....
pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.14.bp_folder/com.sap.pct.erp.ess.14.iviews/com.sap.pct.erp.ess.14.career_job/com.sap.pct.erp.ess.appraisal_document_pmp
also, on the previous post, it was wrong the wrong webdynpro's that were told you. The POWL webdynpro's you already have access to, its when from that application you try to launch the document. You want to launch this webdynrpo, which is configured in the appraisal_document iview:
HAP_AC_PMP_MAIN - for predefined
HAP_MAIN_DOCUMENT- for flexible.

Problem when importing the complex bean model into webdynpro

hi all,
when importing the complex bean model into the webDynpro, it was returning the blank.
Thanks in advance

Hi,
show your code for see and understand what could be wrong.
Here one mine example:
The model class
* Created on 27-ott-2006
* To change the template for this generated file go to
* Window>Preferences>Java>Code Generation>Code and Comments
package tmp.userslist.comp.model.userslist;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
import javax.sql.DataSource;
import java.util.Collection;
import java.util.ArrayList;
import java.io.Serializable;
* @author rtagliento
* To change the template for this generated type comment go to
* Window>Preferences>Java>Code Generation>Code and Comments
public class AllUsers {
// implements Serializable {
     private Connection con;
     private ResultSet rs;
     private Statement stmt;
     private String SqlQuery;
     private Collection usersList = null;
     private UserElement users = null;
//     private Collection empDetailsList=null;
//     private EmpDetailsHelperClass empdetails=null;
     public AllUsers(){
          con = null;
          java.sql.ResultSet rs = null;
          rs = null;
          SqlQuery = "SELECT * FROM TMP_USERSLIST ; ";
     public Connection getConnection (){
               return con;
     public void setConnection (Connection c){
          con = c;
     public Collection getUsersList()
          return usersList;
     public UserElement getUsers()
          return users;
     public void setUsers(UserElement class1)
          users = class1;
     public void execute() throws Exception {
          String DEBUG = new String("");
          try {
               stmt = con.createStatement();
               rs = stmt.executeQuery(SqlQuery);
               usersList = new ArrayList();
               usersList.clear();
               while (rs.next()){
                    users = new UserElement();
                    users.setID(rs.getString("ID"));
                    DEBUG += "ID: " + rs.getString("ID") + " | ";
                    users.setName(rs.getString("NAME"));
                    DEBUG += "NAME: " + rs.getString("NAME") + " | ";
                    users.setSurname(rs.getString("SURNAME"));
                    DEBUG += "SURNAME: " + rs.getString("SURNAME") + " | ";
                    users.setBirthDay(rs.getDate("BIRTHDAY"));
                    DEBUG += "BIRTHDAY: " + rs.getDate("BIRTHDAY").toString() + " ---------- ";
                    usersList.add(users);
               rs.close();
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
               throw new Exception(e.toString() + DEBUG);
//          throw new Exception(new Integer(usersList.size()).toString() + DEBUG);
when use it:
     AllUsers AllU = new AllUsers();
//     AllU.setConnection(myJdbc.getConnection());
     wdContext.nodeAllUsers().bind(AllU);
     wdContext.currentAllUsersElement().setConnection(myJdbc.getConnection());
     try {
          wdContext.currentAllUsersElement().modelObject().execute();
     } catch (Exception e) {
          // TODO Auto-generated catch block
          e.printStackTrace();
Hope can help.
Bye

Problems with Importing / Exporting Keywords and Meta Datas

Hi to all!
I recently upgraded to Aperture 3 and upgraded my referenced library.
Today I opened the Keyword HUD and noticed some keywords splattered in my list, which seem to be any older ones, since the new numbering indicated that they are not applied to any pictures.
So I deleted them.
Than I noticed the <Imported Keywords> folder, opened it, and it contained also a large number of previous keywords. Also they seemed not to be in use, so I also removed them.
Than I locked the Keyword HUD.
Now my question: If I export a version, with the option for 'include metadata' ticked, and edit the version than in Photoshop, and after it, import it back into the Aperture library I do have the problem.
I have tried 'Import Meta Datas' and and click 'Append'. Than it is recognizing the former keywords, which I would appreciate, but not as 'Imported Keywords'.
If I would open the file w/ the External Editor and return it back, I guess I would not have this problem. Usually I do open the referenced RAW file, and import than the edited version back into Aperture. Keywords are stored in the Library, so I would not avail the former given keywords than, is that right?
By the way are the keywords part of Meta Datas or not?
Are there any workarounds?
And had other people also problems with their keyword list after upgrading?
Thank for any ideas / infos!
Michael

Added header to CSV and to Code
$ImportFile = Import-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv" -Header Computer
foreach ($Computer in $ImportFile){
$path = "\\$Computer\c$\Epic\bin\7.9.2\Epic Print Service"
$xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullService//Cleanup | Select -ExpandProperty Node
if ($xml.ArchiveHours -eq '12' -and $xml.DeleteHours -eq '120') {
$Compliance = $True
}Else{
$Compliance = $False
} "$Computer","$Compliance" | Export-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Results.csv"
Results:
select-xml : Cannot find path '\\@{Computer=SW1412-16985}\c$\Epic\bin\7.9.2\Epic Print Service\EpicPullService.config.xml' because it does not exist.
At C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Check_PullServiceXML.ps1:4 char:8
+ $xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullServ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (\\@{Computer=SW...vice.config.xml:String) [Select-Xml], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SelectXmlCommand
If it is not a CSV file then just get it with Get-Content
Get-Content C:\Users\UserName\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv |
 ForEach-Object{
 $computer=$_
 $path ="\\$computer\c$\Epic\bin\7.9.2\Epic Print Service\\EpicPullService.config.xml"
¯\_(ツ)_/¯

Problem while importing the ejbean jar file as model

hi
i created one sample ejb appication and jar the same and then trying to import the same as model(using option like Import JavaBean Model) in my webdynpro,but is giving error there are no java beans to import.
is it possible to import ejbbean like normal javabean?
if yes,why the above problem is coming?
can anyone give the solution?
thanks in advance
Vasu

Satish,
thank you for reply.
this way i already implemented and it was worked fine.
we can not suggest to publish our own ejb component as webservice right?
and i am thinking one more way of doing that is, we can implement one value bean(normal java bean to communicate ejb component internally)and import that jar as our model class in webdynpro.
is this scenario will work?
if this works,then how to make jar file which is maintain the both javabean and ejbcomponent as one thorugh NWStudio.
Thanks
Vasu

Problem in importing the type and jobs

Similar Messages

Maybe you are looking for