Problem in indexing signature

Hi,
I am trying to index image signatures (Using version 9.2 ), but I get the following error report:
java.sql.SQLException:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-01658: unable to create INITIAL extent for segment in tablespace ORDIMAGE_IDX_EXTBS_2
ORA-06512: in "ORDSYS.ORDIMGIDXMETHODS"
Here is the code i am using when i get the error(s).
stmt.execute("CREATE TABLESPACE ordimage_idx_extbs_1 DATAFILE 'G:\\Dipl_testdaten\\Bild\\ordimage_idx_extbs_1.dbf' SIZE 1M REUSE");
stmt.execute("CREATE TABLESPACE ordimage_idx_extbs_2 DATAFILE 'G:\\Dipl_testdaten\\Bild\\ordimage_idx_extbs_2.dbf' SIZE 1M REUSE");
CREATE TABLE bildtable_extern_signature(bild_id int PRIMARY KEY not null, bild_signature ORDSYS.ORDImageSignature);
Images are stored in another table.
CREATE INDEX extidx ON bildtable_extern_signature(bild_signature) INDEXTYPE IS ORDSYS.ORDIMAGEINDEX PARAMETERS('ORDIMAGE_FILTER_TABLESPACE = ordimage_idx_extbs_1, ORDIMAGE_INDEX_TABLESPACE = ordimage_idx_extbs_2');
Any ideas to what migth be the problem?
I would really appreciate any help here!
thank you very much and greeting from germany!
rabbit

Hmmm,
You want to create a tablespace in a Java program?
I would not think this is recommended practice. This is typically done by a system administrator. If your database configuration needs change (or if image comparison software tablespace needs change due to an upgrade), it would be great for the system administrator to be able to configure the tablesppaces without the application having this hard coded.
That being said, I would try this in PL/SQl first. The user who performs this tablespace function must have sysadmin privleges (which more than suggests the database tablespaces should be set up by the system adminstrator).
The typical database user is not allowed to make tablespaces.
I would create the tablespace as system (or sys)first... Perhaps you did this? I think 1 meg is a bit small as well for an initial size...
Are the tablespace files created at all?
Can you do this in PL/SQL and post the results of creating the tablespace (as user sys or system)? and then creating the index?
Thanks,
Larry

Similar Messages

Problem with index in merged projects

Dear Sir,
I have a problem with index in the master project, I can only
view the master project index keywords under the index tab. My
master project contains 2 topics besides the other sub projects. I
have created index for all sub projects indvidually and at the end
I created the master project index.
I made sure that the 'Binary Index' flag is ticked before
compilation and stil the problem is on, do somebody know what could
be the problem.

Hi,
Two points here.
Firstly, you can duplicate SSL's. (Right click on an SSL in
the projects sub-directory and select the duplicate layout option.
This will give you a copy of the original SSL).
I tend to have two SSL's - one is local and I use that every
time I test compile the project when I'm working on it.
The other is set to output to the master project. I use that
once I'm happy with the sub-project and start working with the
master project.
Second point is to be aware of how RoboHelp treats the
imported/merged .chm files from the sub projects.
It imports them into the main project master directory - then
when the master project is compiled it puts a copy of them into the
master project SSL. However, if you re-compile it doesn't overwrite
the files that are already in the master project SSL directory.
This is why you have to be aware of where the sub project
.chm files are going - you need to make sure that if you revise the
sub projects, a fresh copy of the .chm files ends up in the output
SSL directory of the master project.

Problems with Indexing and Classification

hi KM Gurus,
We faced some problems in Indexing and Taxonomies for which I would like to know the solution/reason.
(1) We tried providing query based classification in which the query condition which is based on the "Content" alone worked for us. Whenever we tried specifying conditions based on "file extension" or "title", it didn't work out. Did that work for anybody else?
(2) Also we are not able to get any proper info about the various options that are available while creating a query based classification. For example, there are two options like "title" and "string title". But we donno the difference b/n the two. If it works out we can find the difference. But it is not working too. So we are not able to find the difference between the two.
(3) And I tried setting the crawler parameter of my own instead of the standard crawler. But the index was found to be inactive when i set that to my crawler and it worked fine with the standard crawler. I am not able to make it active. Any clues behind this?
Expect all your guidance and help.
best regds,
alagammai.

Hi Alagammai,
concerning issues (1) and (2).
Normally the mentioned properties are displayed as 'Name' and 'Namme as String'.
These two properties are(in most cases) the title of the document.
One is indexed in 'Text' format. The other one in 'String' format. That results into different opportunities within the query based classification.
'Displayname as String' can be used to sort documents alphabetically: A, B, ... into categories.
'Displayname' allows you to do a linguistic scan on document titles.
To separate file types I would use the property MIME-Type.
But you may try to define a query *.doc for the property 'Name as String'.
Regards Matthias

Does anybody have this update problem? index-lion-snowleopard-leopard.merged-1.sucatalog could not be found

Does anybody have this update problem?
index-lion-snowleopard-leopard.merged-1.sucatalog could not be found on server swscan.apple.com
Is there a solution?

You can send feedback to Apple here > Apple - Mac OS X - Feedback
Including the link to this thread may help > https://discussions.apple.com/message/16092403#16092403
I'm seeing numerous posts regarding this issue also.

Problem with Digital Signature strategy in Document Managment System

Hello ALL,
I am facing problem with Digital Signature strategy in DMS. If any help its greatly appreciated.
I have senario where Approvers in DMS will review the document and approve the document and put on their digitial signature. if i have multiple approvers maintained in the characterstics it has to check weather it has been approved by all approvers otherwise it has to reset the status to for approval.
My problem is i am able to reset the status back from approved to for approval using the badi document_status01 but when the next approver logs in to the document and change the status to approved he is not able to get the digital signature pop up which it comes only first user approves it.
can any one help me out on whats going wrong in it.
Thanks
Srikanth Aduri.

Hi,
maybe the reason for this is that the status of the digital signature is not changed. Then the system thinks that the digital signature is still completed and therefore the user is not getting the pop-up again. The database table for the digital signature for documents is TC77. I hope this information is usefull for you.
Best regards,
Christoph

Pages '09 problem with index

Hi all,
So this is my problem, i'm editing ePub to publish in the Apple iBooks Store, and do them with Pages, but i've big problems with index
i'm using personal styles (as i change chapter colors, font size)
in "old Pages" i could not do index as it was telling me i was not using none of the style in index (even with my proper styles markeds, now when i create index in the style box my styles doesn't show soo it can't create index)
In Pages '09, i have no problem to create index, the problem is when i export to ePub it does not show it
or when it was shoing it, in the normal index, i could also see it in the book as a normal page, and i want it only in the normal ebook index.
any suggestions?
thanks for your help
(if answer can be from Spanish person in Spanish, beter, than beter, but English or french answer welcome too )
have nice .... what ever it is for you.

more or less i got it (after trying, and trying)...
i used the template from apple: http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
then i make my peronal style using the color i whant for chapter title... this is ok
but still hane the enoying index as normal page....(pic 1) only what pic 2
if i find a solution, will post it, if you find it, and also how to change the color of the index text (it is supposed to be change to black...)
I'll apreciate the help.
thanks again, and have nice day

Indexing signatures

Hi,
I am trying to index image signatures (Using version 9.2 ), but I get the following error report:
create index imgindex on object_tbl p(treat (signature)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "ORDSYS.ORDIMGIDXMETHODS", line 121
Here is the code i am using when i get the error(s).
create tablespace ordimage_idx_tbs_1
DATAFILE 'e:\Oracle\oradata\sommer1\ordimage_idx_tbs_1.dbf' SIZE 1M REUSE;
create tablespace ordimage_idx_tbs_2
DATAFILE 'e:\Oracle\oradata\sommer1\ordimage_idx_tbs_2.dbf' SIZE 1M REUSE;
set serveroutput on
set echo on
create index imgindex on object_tbl1(image_body)
INDEXTYPE IS ORDSYS.ORDimageIndex
PARAMETERS('ORDIMG_FILTER_TABLESPACE=ordimage_idx_tbs_1,
ORDIMG_INDEX_TABLESPACE=ordimage_idx_tbs_1');
The table looks like this;
create table object_tbl1(
object_id number,
title varchar2(80),
image_body ORDSYS.ORDImage,
signature ORDSYS.ORDImageSignature,
constraint object_pk1 PRIMARY KEY (object_id))
Any ideas to what migth be the problem?
I would really appreciate any help here!
Nina

There seem to be 2 things wrong.
1) You can't have newlines in the specification...
2) THe prefix on parameters is ORDIMAGE not ORDIMG...
So, the create index statement should be:
create index imgindex on object_tbl1(image_body)
INDEXTYPE IS ORDSYS.ORDimageIndex
PARAMETERS('ORDIMAGE_FILTER_TABLESPACE=ordimage_idx_tbs_1,ORDIMAGE_INDEX_TABLESPACE=ordimage_idx_tbs_1');

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Problem generating index with 2th level in cs4

Windows XP sp 3 - Indesign CS4 601
When generating an index with a 1st and a 2th level, in the 2th level the entry of the 1st entry is always repeated.
E.g. the index should look as this:
text     75
     capitalized     76
     import     78
word     105
     language     108
     meaning     109
But actually the index looks as this:
text     75
     textcapitalized     76
     textimport     78
word     105
     wordlanguage     108
     wordmeaning     109
Is this a bug, or is there a solution for it?
Thanks for your help!
Luc Van de Cruys
phaedra creative communications

Oops!
Just tested the script.
I run it, and I get the script alert 'All Done' at the end.
But nothing happens.
This is what I do:
- I generate the index.
- I select the index with the text tool (select all or just put the textcursor somewhere in the index makes no difference).
- I run the script
- I get the message 'all done', but there is no difference. The problem persists.
Any other ideas?
Thanks anyway.
L.L.

Problem setting Index value on ComboBox

I am running into a problem with setting the index on a
dropdown box. I will try to give as much detail as possible. From
what I can tell, it should be working and does, but only for one
item. If anyone can suggest a different group to post to, let me
know. I can not find a solution anywhere.
I have the following code to show a combobox. The data is
derived from a XML config file. The combobox itself works fine and
does in fact show all of the data from the XML config file.
<mx:HBox>
<mx:Label text="Status" width="55"/>
<mx:ComboBox id="uxstatus" dataProvider="{_xmlVulnStatus}"
labelField="status"/>
</mx:HBox>
The part of the XML config file that is used to populate the
combobox.
<mainconfig>
<vulnstatus>
<status>Open</status>
<status>In Progress</status>
<status>Closed</status>
</vulnstatus>
</mainconfig>
Now, when a user selects an item from a separate datagrid, on
change I have it run the following function. The function reads in
the data, parses it and compares the "status" value from the
datagrid info with the "status" options in the XML config file.
When it matches, it sets the index number for the combobox so it
shows the right data. My problem is below the function.
public function parseMSVulnStatus(evt:Event):void {
var xmlMSV:XML = XML(msdetailed.selectedItem); //the host
dataProvider item
//trace ("MS Vuln status = "+xmlMSV.status);
for ( var MSVi:Number=0; MSVi<_xmlVulnStatus.length();
MSVi++ ) { //loop over the items in the dataProvider
var sDataValueCurMSV:String =
_xmlVulnStatus[MSVi].valueOf(); //get the current item.data value
if ( sDataValueCurMSV == xmlMSV.status ) { //compare desired
value to current item.data value
mx.controls.Alert.show("match found - MS Vuln status =
"+xmlMSV.status +" and MSVi = " +MSVi);
msstatus.selectedIndex = MSVi; //set the seletedIndex of the
combo box
else {msstatus.selectedIndex = -1}
if (msdetailed.selectedItem.falsepos=='Y')
{msfalsepos.selected=true;}
The problem. If the value from the datagrid is "Closed", it
shows the index as being "2" and sets the combobox index
appropriately and displays "Closed". The alert box is displayed
(for testing) to show the values.
If the value from the datagrid is either "Open" or "In
Progress", it does show the proper index as being either 0 or 1,
respectively and shows the alert box. However, the combobox appears
to be set to -1. I have verified the data is set properly in the
database (which is what populates the datagrid).
Any thoughts on this? Based on my alert box, it appears that
the data is seen properly and that it knows how to set the index of
the combobox.... it's just not happening (unless it's "Closed").
Thanks in advance.
Chris

you could force a selected index using something like
mydatagrid.selectedIndex=0 or 1 try this pos i made for someone
beacause if you want to cange the value of field based on selection
this could be simpler by using an xml file with all the value for
each record in one object
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=585&threadid=1273227&CF ID=48614795&CFTOKEN=89f80916a77a7788-F5418AD3-F360-8283-2DCCA603D0E18DCF&jsessionid=48307b ef3fdf5663544a

Problem with index.jsp and JSF

hi all
I have an index page "index.jsp" in the root directory of deployed project and in that page there is just a <jsp:forward> tag:
<jsp:forward page="pages/mainPage.jsf" />I am using facelets and I have a template.xhtml
when I run the browser nothing will be desplayed. by looking at Tomcat console, it seems that it renders the template.xml. if I place the path of the page directly in the address bar of browser, everything is OK
http://localhost:8080/myproject/pages/mainPage.jsf
but if I put following, it doesnt work.
http://localhost:8080/myproject/
I set the welcome-page to index.jsp in web.xml, and my pages are located in a directory namely "pages"
any help will be appreciated.
regards
Mohammad

I'm not sure what the problem is exactly. This topic might help though:
http://forum.java.sun.com/thread.jspa?threadID=696586
Be sure to read right to the bottom. You may be able to try a couple other things.
Hope this helps,
CowKing

Problem with index markers and importing MS Word 2007 files

This was ugly in that it wasn't caught until after a book had been typeset and the index was being finalized. I'm now having to go back and manually insert a zillion index markers. Not fun.
This was my first project since migrating from FM 7.1 to FM9.0.3.
Source documents are Microsoft Word 2007. Am working in Microsoft Windows 7 64-bit.
When the Word files were imported into FrameMaker, only SOME of the index markers were imported. The difference between those that were imported and those that weren't was seemingly random.
I did some testing and found the problem and a solution.
Looking at the source Word .docx file, and displaying hidden text shows two types of index markers:
1. { XE "word to be indexed"}
2. {xe "word to be indexed"}
Note the difference in case and the extra space after the opening brace in #1. Markers of type 1 were imported fine. Markers of type 2 were stripped by the import process.
The solution:
Backsave the Word file to Word 2003 format (.doc) before importing into FrameMaker.
I backsaved to Word 2003 and imported using both the "Microsoft Word" and "Microsoft Word 2007" filters and both filters imported correctly. It's only when trying to import a Word 2007 .docx file directly that things run amok.
Grr...

Thank you for posting your solution, Dan. It's cold comfort, but I've also ran into this issue in the past, almost certainly well before Word2003 though, probably as far back as Word2000 or earlier.
In your testing, did you try saving as RTF to see if the markers were homogenized, by any chance? In my simple testing just now, Word itself recognized the index field correctly no matter whether I changed the field to "xe" or "XE", but FM's import of the .docx file format wouldn't recognize "xe", only "XE". But importing an RTF file handled both upper- and lower-case entries.
Ah, yes, that's it -- saving the Word2007 file as RTF (with 2 fields, one caps, one lower-case) changed cap field to lower-case when the RTF is opened in Word again, so saving as RTF does homogenize the fields to lower-case. Is it possible that your file(s) were changed to or saved as RTF at any point in their life-cycle? I believe some older versions of Word were actually RTF under the hood, too -- if you do Save As in Word2007 you can scroll through the File Type entries and see "Word 97-2002 & 6.0/95 - RTF (*.doc)" I believe some doc management systems change binaries to RTF too, or conversely some apps create RTF but they name the files as doc.
So Word itself recognizes either lower- or upper-case, and FM's RTF import handles both, but not the .docx import.
Sheila

Problem with index markers

My index markers are not recognizing page ranges when using the "to next use of style" in one of my book documents but works in all the other documents. I tried to export as IDML but it didn't fix the problem. I do notice that the marker looks different in the story editor from the ones in the other documents. I tried to delete the marker and reindex but the it didn't fix the problem and the marker still looks different.

Thank you for posting your solution, Dan. It's cold comfort, but I've also ran into this issue in the past, almost certainly well before Word2003 though, probably as far back as Word2000 or earlier.
In your testing, did you try saving as RTF to see if the markers were homogenized, by any chance? In my simple testing just now, Word itself recognized the index field correctly no matter whether I changed the field to "xe" or "XE", but FM's import of the .docx file format wouldn't recognize "xe", only "XE". But importing an RTF file handled both upper- and lower-case entries.
Ah, yes, that's it -- saving the Word2007 file as RTF (with 2 fields, one caps, one lower-case) changed cap field to lower-case when the RTF is opened in Word again, so saving as RTF does homogenize the fields to lower-case. Is it possible that your file(s) were changed to or saved as RTF at any point in their life-cycle? I believe some older versions of Word were actually RTF under the hood, too -- if you do Save As in Word2007 you can scroll through the File Type entries and see "Word 97-2002 & 6.0/95 - RTF (*.doc)" I believe some doc management systems change binaries to RTF too, or conversely some apps create RTF but they name the files as doc.
So Word itself recognizes either lower- or upper-case, and FM's RTF import handles both, but not the .docx import.
Sheila

Problem with index.html. Help!

I am having a problem with the index.html. In iWeb my site looks perfect. When I publish it to a folder and then open the index certain media is missing but just on one page.
I have tried deleting the published site from the folder and re-publishing but nothing seems to work. Same result...
Even more interesting, I uploaded the site almost a month ago and everything was fine until I noticed last week that my pics on one page had been completely erased. What could cause the change? I didn't upload a new version of the site.

Even more interesting, I uploaded the site almost a month ago and everything was fine until I noticed last week that my pics on one page had been completely erased.
Please provide your url so we can see what is happening.
The index.html file plays no role in what you are describing.

Problem in XML Signature

Hi,
i get an Exception in Registering mechanism for XML Signature factory
it says.
javax.xml.crypto.NoSuchMechanismException : Cannot find DOM Mechanism type
I use J2sdk1.4.2_05 with JWSDP 1.4
Following is the code do let me know where i go wrong.
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import org.w3c.dom.Document;
import javax.xml.crypto.dsig.XMLSignatureFactory;
import javax.xml.crypto.dsig.dom.DOMSignContext;
import javax.xml.crypto.dsig.XMLSignatureFactory;
import javax.xml.crypto.dsig.Reference;
import javax.xml.crypto.dsig.SignedInfo;
import javax.xml.crypto.dsig.XMLSignature;
import javax.xml.crypto.dsig.CanonicalizationMethod;
import javax.xml.crypto.dsig.Transform;
import javax.xml.crypto.dsig.DigestMethod;
import javax.xml.crypto.dsig.SignatureMethod;
import javax.xml.crypto.*;
import javax.xml.crypto.dsig.*;
import javax.xml.crypto.dom.*;
import java.security.Provider;
import javax.xml.crypto.dsig.keyinfo.KeyInfo;
import javax.xml.crypto.dsig.keyinfo.KeyValue;
import java.security.KeyPairGenerator;
import java.security.KeyPair;
import javax.xml.crypto.dsig.keyinfo.KeyInfoFactory;
import java.io.FileInputStream;
import java.util.Collections;
//author Palani V. Rajan
// SafeScrypt Ltd
class XMLSign
XMLSign(){}
/*XMLSign(String inputFile)
public void signTheMarkup(String inputFilePath)
Document domDoc;
try{
System.out.println("Creating DOM");
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
dbf.setNamespaceAware(true);
DocumentBuilder db = dbf.newDocumentBuilder();
domDoc = db.parse(new FileInputStream(inputFilePath));
System.out.println("Generating Key's.....");
KeyPairGenerator kpg = KeyPairGenerator.getInstance("DSA");
kpg.initialize(1024);
KeyPair kp = kpg.generateKeyPair();
DOMSignContext dsc = new DOMSignContext(kp.getPrivate(), domDoc.getDocumentElement());
String providerName = System.getProperty("jsr105Provider", "org.jcp.xml.dsig.internal.dom.XMLDSigRI");
System.out.println("Creating xml sign.....");
System.out.println("Provider Name "+providerName);
XMLSignatureFactory fac = XMLSignatureFactory.getInstance("DOM",(Provider) Class.forName(providerName).newInstance());
System.out.println("T 1");
Reference ref = fac.newReference("", fac.newDigestMethod(DigestMethod.SHA1, null),Collections.singletonList(fac.newTransform(Transform.ENVELOPED, null)),null, null);
System.out.println("T 2");
SignedInfo si = fac.newSignedInfo(fac.newCanonicalizationMethod(CanonicalizationMethod.INCLUSIVE_WITH_COMMENTS, null),fac.newSignatureMethod(SignatureMethod.DSA_SHA1, null),Collections.singletonList(ref));
System.out.println("T 4");
KeyInfoFactory kif = fac.getKeyInfoFactory();
KeyValue kv = kif.newKeyValue(kp.getPublic());
KeyInfo ki = kif.newKeyInfo(Collections.singletonList(kv));
System.out.println("T 5");
XMLSignature signature = fac.newXMLSignature(si, ki);
signature.sign(dsc);
}catch(Exception e){e.printStackTrace();}
public static void main(String[] q)
System.out.println("Creating XML Signatures.....");
XMLSign xs = new XMLSign();
xs.signTheMarkup(q[0]);
Thnx in Advance
Vinodh

I have encountered the same problem. I am using Jbuilder 5 with JDK 1.3.0. I copied all the JAR files of jwsdp-1.5 by creating a custom library.
Even then It didnt work. Can some one who has resolved this please help.
I have tried running the same code in JDeveloper 10g (10.1.2) and got a same error.
Regards,
Srinivas.

Problem in indexing signature

Similar Messages

Maybe you are looking for