Problem in Loading Data from SQL Server 2000 to Oracle 10g

Hi All,
I am a university student and using ODI for my final project on real-time data warehousing. I am trying to load data from MS SQL Server 2000 into Oracle 10g target table. Everything goes fine until I execute the interface for the initial load. When I choose the CKM Oracle(Create unique index on the I$ table) km, the following step fails:
21 - Integration - Prj_Dim_RegionInterface - Create Unique Index on flow table
Where Prj_Dim_Region is the name of my target table in Oracle.
The error message is:
955 : 42000 : java.sql.SQLException: ORA-00955: name is already used by an existing object
java.sql.SQLException: ORA-00955: name is already used by an existing object
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I am using a surrogate key column in my target table alongwith the natural key. The natural key is populated by the primary key of my source table, but for the surrogate key, I have created a sequence in my oracle schema where the target table exists and have used the following code for mapping:
<%=snpRef.getObjectName( "L" , "SQ_PRJ_DIM_REGION" , "D" )%>.nextval
I have chosen to execute this code on target.
Among my attempts to solve this problem was to set Create Index option of the CKM Oracle(Create Index for the I$ Table) to No so that it wont create any index on the flow table. I also tried to use the simple CKM Oracle km . Both solutions allowed the interface to execute successfully without any errors, but the data was not loaded into the target table.
When I right-click on the Prj_Dim_Region data store and choose Data, it shows empty. Pressing the SQL button in this data store shows a dialog box " New Query" where I see this query:
select * from NOVELTYFURNITUREDW.PRJ_DIM_REGION
But when i press OK to run it, I get this error message:
java.lang.IllegalArgumentException: Row index out of range
     at javax.swing.JTable.boundRow(Unknown Source)
     at javax.swing.JTable.setRowSelectionInterval(Unknown Source)
     at com.borland.dbswing.JdbTable.accessChange(JdbTable.java:2959)
     at com.borland.dx.dataset.AccessEvent.dispatch(Unknown Source)
     at com.borland.jb.util.EventMulticaster.dispatch(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.executeQuery(Unknown Source)
     at com.sunopsis.graphical.frame.a.cg.actionPerformed(cg.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I do not understand what the problem is and wasting days to figure it out. Any help will be highly appreciated as my deadline is too close for this project.
Thank you so much in advance.
Neel

Hi Cezar,
Can u plz help me with this scenario?
I have one Oracle data model with 19 source tables and one SQL Server data model with 10 target tables. I have created 10 interfaces which use JournalizedDataOnly on one of the tables in the interface; e.g in interface for DimCustomer target table, I have 2 tables, namely Customer and Address, but the journalizing filter appear only on Customer table and this option is disabled for Address automatically.
Now I want to create a package using OdiWaitForLog event detection. Is it possible to put all these 10 interfaces in just one package to populate the target tables? It works fine when I have only one interface and I use the name of one table in the interface for Table Name parameter of OdiWaitForLogData event, but when I try a comma seperated list of table names[Customer, Address] this error happens
java.sql.SQLException: ORA-00942: table or view does not exist
and if I use this method <%=odiRef.getObjectName("L","model_code","logical_schema","D")%>, I get this error
"-CDC_SET_NAME=Exception getObjectName("L", "model_code", "logical_schema", "D") : SnpLSchema.getLSchemaByName : SnpLschema does not exist" "
Please let me know how to make it work?
Do I need to create separate data models each including only those tables which appear in their corresponding interface and package? Or do I need to create multiple packages each with only one journalized interface to populate only one target table?
Thank you for your time in advance.
Regards,
Neel

Similar Messages

Loading data from SQL server 2000 to Oracle using OWB 10.2

Hi All,
I have to move data from SQL server to Oracle using OWB. Any idea how to connect to SQL Server thru the OWB design centre console. There is no detail available in the documentation. OWB cocumentation says that "OWB Integrator for Oracle DB & Apps 3.0" is available to connect to Non-Oracle Database (including Sybase, Informix, ODBC).

Hi,
yes, you can use ODBC and configure HSODBC on the database server to create a database link to the sql-server. If your oracle server is microsoft based you are ready, otherwise you have to buy an odbc-driver for linux, unix or whatever you use.
Ciao Stephan

Reg. Migrating data from SQL Server 2000 to Oracle

Hi All,
I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
Could you guys find any tool for the same.
Please do the needful.
Thanks & Regards,
Prathap

hi dermot,
it's very urgent now. Can you please give any solution for this.
and also i tried the SQL developer tool. But i got an below error,
Error starting at line 2 in command:
CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:2 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 3 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 4 in command:
CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:4 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 5 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 6 in command:
CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:6 Column:49
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 7 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 8 in command:
connect dbo_testdatalatest/dbo_testdatalatest;
Error report:
Connection Failed
Commit
Regards,
Prathap.R

Move data from sql server v8 to oracle 10g

I just got urgent projects to migrate the data from MS SQL server 2000 to oracle 10g. The following are requirements:
Source data/table: MS sql server 2k (version 8) on MS 2000 machine.
Destination Data/table: oracle 10g (10.1.0.4) on Redhat version 3.
Total number of tables: < 10 tables and < 1000 rows each tables.
This is only one time data extraction. No periodically data extraction need.
Questions:
What connect method I should use? (odbc or jdbc)
What if I have image datatype?
Thanks in advance.

Use the Oracle Migration Workbench.
http://www.oracle.com/technology/tech/migration/workbench/index.html
I think IMAGE will be migrated to BLOB by default.
Donal

Migrating from SQL Server 2000 to Oracle 10g

Hello,
I am a newbie to Oracle 10g and haven't really worked with Oracle since 8i. I have been tasked to migrate all of our databases and tables to Oracle 10g. I need a little help getting started or pointed in the right direction on how to copy all that data from SQL Server to Oracle 10g. I know that Oracle has an Import/Export Utility, but don't know if it can do what I need. Can some one help point me in the direction I need?
Thanks, Marion

Ayub
You need to download both the Oracle Migration Workbench core tool and the SQL Server 2000 plugin (SQLserver2k.jar). You copy the plugin into the plugin directory, after you unzip the Oracle Migration workbench main.
The tool comes with release notes and a user guide, that explains the necessary setup and migration process.
Donal

How to transfer database tables from sql server 2000 to oracle 10g

Hi,
I have a database and tables in sql server 2000. I have to transfer those data to Oracle 10g. I have installed Oracle warehouse Builder ETL Tool. Using this how can i transfer data. Any help is vary helpful for me.
Thanks in advance.

you have to do it using ODBC HS.
1. Configure ODBC connection through gateway.
2. Create a initxxx.ora file with HS config.
restart gateway listener services
3. on target o/s add entries to your tnsnames.ora
4. On your target o/s create a db link
restart listener on target
cheeck this out.Non-Oracle connection through HS issue
Edited by: Darthvader-647181 on Jan 29, 2009 2:02 AM

Junk arabic details while transfer arabic data from sql server 2000 to orac

We are facing problems to view arabic details in oracle which is transfered from sql server 2000 .
In oracle database we are using charecterset is UTF8.
NLS_CHARACTERSET :UTF8 and NLS_NCHAR_CHARACTERSET:UTF8
Sqlr server collation is SQL_Latin1_General_CP1256_CI_AS.
we are using stored procedure for transfering data from sql server 2000 to oracle.
And i am able to view some arbic details which is not transfered from sql server 2000.
I thing some configuration i need to change in sql server.
Can any one help me out from this issue?

I know that this is not the correct forum to ask this question.
If someone knows this issue please help me.
We were using to import from another intermediate sqlserver and it was successfull.
And more over i cannot change anything in oracle database which is live.
The issue is we are using one intermediate sqlserver for transfering the data to oracle apart from main sqlserver.
now we want to stop the intermediate and need to transfer from main sqlserver to oracle Db.
i guess , i need to change some configuration in main sql server.
Main sql server and intermediate have the same collation.
Could you please help me out from this problem?

Load Data from SQL Server to Oracle 10g using Sql*loader utility

I am trying to lod data from sql server 2005 to oracle 10g.
What is the best way to do it?
Can sql*loader utility do it?
what is the difference of using sql*loader utility and migration tool fom sql developer ?
Thanks
Edited by: user11313758 on Sep 30, 2009 4:30 PM

Hello:
You could consider using Oracle Heterogeneous Services to do this. If your Oracle database is on a Windows platform the link below shows you how to make a connection to SqlServer from an Oracle database.
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
Varad

General question on SQL Server 2000 to Oracle 10g

Hello all,
I just have a general question on migration from SQL Server 2000 to Oracle 10g using SQL Developer.
How does it migrate Users with proper privileges from SQL Server to Oracle? Follow the interface steps? Or should the users be created on destination Oracle side?
Thank you.

Hi,
It depends which type of migration you are making.
For a 'Standard' migration when you migrate data a 'create user' statement is created as part of the migration and you will see this in the generated code.
If you are using the 'Quick' migration option then you need to create the Oracle user or use an existing user to receive the data.
Your best option is to review the documentation available from -
http://www.oracle.com/technology/tech/migration//workbench/index_sqldev_omwb.html
or directly from -
http://download.oracle.com/docs/cd/E12151_01/index.htm
and then get back with specific questions if this does not give you the information you need.
Review the chapter -
2. Migrating Third-Party Databases
in -
Oracle® Database SQL Developer User’s Guide Release 1.5
Regards,
Mike

Migration from SQL Server 2005 to Oracle 10g

Dear buddies,
I need to migrate my tables with data from SQL Server 2005 to Oracle 10g. How can I do it in the best possible way?
Please guide me.
Nith

Nith,
I doubt if there is one best practice that can cover all cases of migrating data from sql server to Oracle. l generally find various factors case-by-case that make me chose one approach over the other. Without considering the business case and environment specific factors, some of the things I would like to know would be: The data types of the tables columns, table sizes, number of tables and if this is a one time process or a recurring process.
One of the easiest (some times rather pesky) process would be:
-Dump source data (Sql Server data) into flat files, csv or any preferred format
-Setup a set of staging set of tables in the destination DB (Oracle in your case). You can setup the stage tables to enforce data-types, value sets and even some level of integrity constraints or any data logic or what ever you would like to filter out. Load the flat file data into a set of Oracle stage tables (Sql*Loader would be a good candidate)
-You can always move data from these stage tables to you application tables
You can script this whole process to run as batch or on demand or how ever you would like.
I am sure you can google and find a bunch of proprietary as well as open source tools to do the same with little to a lot of work.
good luck!

Trying to migrate SQL Server 2000 to Oracle 10g.

Hi.
I´m trying to migrate from Sql Server 2000 to Oracle 10g and I got some troubles.
I have connected both databases with my Oracle Sql Server, after that I went to the Menu--> Migrate--> Fast Migration and then fill all the steps necesary.
I can see the repository`s table at the oracle schema but after that the Sql Developer hang at the point "capture". I let the tool work for 2 hours and nothing to do. It´s not a hughe db so could be done faster.
May I miss something?.
Thanks.

Hi
I also have similar issue when trying to migrate from MS SQL 2005 to oracle 10g.
I use the SQL Developer Version 2.1.0.63.
First, I tried to use 'Quick Migration' then it created repository then stop there with error message
"Error ocurred during capture: ORA-01400: cannot insert NULL into ("DDHCOWNER"."MD_PROJECTS"."ID")"
Then, try manual way to capture SQL server, but some how it doesn't work. It just refresh IDE and stop.
Before this activity, I tried to migrate MS SQL 2005 using 'Quick Migration' and it works. But this time I have to do it on another DB then this happened.
So I re-try the previous connection then encountered the same to all.
Thus, please kindly help to advice how to solve this problem.
Thank you so much.
Regards,
Sai Lin Naung

Converting SQL statements from MS server 2000 to Oracle 10g

We are moving over from MS server 2000 to Oracle 10g as our database for Peoplesoft system.
There are several embedded SQL statements that I need to investigate to see what needs converting.
So far I can see a need to convert the following:
Dates. GetDate() to ?
Outer joins. *= to LEFT OUTER JOIN
Has anyone else done a similar exercise and what other functions do I need to convert?
Thanks.

Hello
A quick google search (http://www.google.co.uk/search?hl=en&q=ms+sql+server+oracle+differences&spell=1)
came up with this:
http://dba-oracle.com/oracle_news/2005_12_16_sql_syntax_differences.htm
There's a quite a few more sites listed.
HTH
David

How to Migrate my database from SQL Server 2000 to Oracle

I want to transfer my database from SQL Server 2000 to Oracle, Can I do this without using Oracle Migration Workbench ??
Please help me.
Thanks in advance
Vicky... :-)

Do you have a good technical reason for not wanting to use the Migration Workbench?
Given that it's free and does a hell of a lot of the work for you, why wouldn't you use it?
Other than that, I would say you would be on your own...
cheers,
Anthony

Migration from of database and app from SQL server 2005 to Oracle 10g

Hello Every body,
Lately, I have been requested to migrate one inhouse developed hub application from SQL server 2005 to Oracle 10g. The objective is to move application and also the database to Oracel 10g.
Here is the current platform:
OS Win 2008 64 bit
JDK 1.4.2
JBoss 3.2.5
EJB 2.1
My question is what kind of issues you guys see in above upgrade. As far I know, Schema and Database migration can be done by Oracle workbench. Oracle 10g supports JDK 1.4. Oracle 10g also supports EJB 2.1.
Anything, I need to take into consideration or any risks or problems. I would like to list down all the risks, and accordingly, I am thinking of start the upgrade.
Thanks in advance.
Regards,
Zeeshan Qureshi

In general the Java/J2EE application needs work in the following categories:
1. Connection Settings: Use Oracle JDBC drivers, create new data sources, connection pools and what not. Disable AUTOCOMMIT for Oracle JDBC Connections.
2. For EJBs, you should regenerate the entity beans because some object names/column names might have changed in oracle.
3. Any custom SQL that is in use in the EJBs will have to be ported to Oracle just as you would do in stored procedures and other applications.
4. For Java front-ends, if you are using callouts to stored procedures and expecting result sets then they will require some changes. You need to modify the stored procedure call signature to include the REF CURSOR variables and process them.
5. Changes to any SQL Server specific database functions manipulating character/date data will be required.
6. CLOB/BLOB/XML apis are different across databases so if you are using those then focus on them as well.
7. Retreiving Auto/generated keys from database also may need changes from what I have seen.
Hope this helps..
Regards
Prakash
NOTE: Not sure why but my posts from yesterday are not visible today. Even worse is that I can see them in one browser (FireFox) but not in Internet explorer. Crazy browser day I am having.

Migration from SQL SERVER 2008 to Oracle 10g issues.

Hi ,
I'm trying to migrate from SQL Server 2008 to Oracle 10g and I end up with some issues that I wanted to ask some info about it.
First, I was following a tutorial
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
and and in the last version of Oracle SQL developer I downloaded, I didn't find the Load Database Capture Script Output option.
My first question is how can I either add this option or is there a new way to load the capture script ?
Then I use the migration wizard and after following everything, I had the migration complete message from the application.
When I tried to open my connectionss, it tells me version 11.2 is required. Does that mean that Oracle SQL developper 3 only
do the migration for oracle 11g? And if I tried the previous versions, it doesn't support SQL server 2008.
What do I do in this case ?
Thanks !

Thank you for your reply.
After using the wizard and made the offline migration script, in the Migration projects window I made a move data to the oracle connection I previously made and after when I tried to reopen the connection, I couldn't.
Well I didn't retry it yet to see if I'll have the same behavior but basically this is what I think I did. When I tried to open the connection I made, it says, Oracle 11.2 is required.
Now, I just generate target from the convert model and it says migration complete but how do I test it and I do I go to oracle and see change ?
Do I had to create a special user in SQL Server to log to it first ? How do I logon to it ?
Edited by: 873671 on Jul 20, 2011 7:03 AM
Edited by: 873671 on Jul 20, 2011 7:19 AM

Problem in Loading Data from SQL Server 2000 to Oracle 10g

Similar Messages

Maybe you are looking for