Problem in mobile phone camera Image retrieval using J2ME ...

Hi
I am doing video surveillance application with mobile phone ...
but i am not able to get the images faster from my mobile phone ..
I need atleast 2 photos /frames per second using J2ME ...
wen i tried it , it is very slow and i am not able to get 2 frames per second ...
can somebody help me ?

That's quite a bunch of stuff you want to do there.
Just a short hint for the image processing part here: You can ask any BufferedImage for it's raster (using getRaster()), and you can use the raster's getData() method to access the DataBuffer (the array storing the pixel values). It should be quite easy to split the DataBuffer into 9 tiles which you can then store as blobs. You can also use the DataBuffer to check for color values, or, if you don't want the trouble, you can always use the raster's getRBG(...) method - beware though, it's a lot slower for processing large quantities of pixels. Just another hint: you will have to cast the DataBuffer to it's real type if you want to access the pixel values, for example to DataBufferByte for most RGB images. You can use the DataBuffer's getType() method to determine which kind of buffer the image is using.

Similar Messages

  • Check if mobile phone got turned off using j2me application

    hello
    Is there any way to know if the mobile phone got turned off from my j2me application.
    this is really urgent please help me out.

    alyaitani wrote:
    hello
    Is there any way to know if the mobile phone got turned off from my j2me application.No. Why do you think you need to detect this?
    this is really urgent please help me out.[http://catb.org/~esr/faqs/smart-questions.html#urgent]
    db

  • Mobile Phone Camera API

    Does anyone know what the command for recording an image by the mobile phone imaging API is called? I want to set my command listener to go to a new form when you select "Yes" from the record image page. Is anyone familiar with this application that could help me out?

    Hi, are any of the files in this presentation available online?

  • Content based image retrieval using Oracle Multimedia

    I'm doing a thesis in which I'm trying to improve content based image retrieval, and using Oracle 11g Multimedia and I'm hoping to do CBIR system based on signature generated by Multimedia.
    To do my application I'm using  this documentation http://fildz.developpez.com/tutoriel/oracle-java/ordimage/
    Now I need to have an idea about the technique used to generate signature. In this link https://community.oracle.com/message/618866#618866, i find some indications like : texture histograms, global color, the Manhattan distance... so i look for a clear and rich documentation about generated signature in CBIR using Oracle 11g.
    Thank you

    The details in that thread is the only information that can be shared.
    Melli
    Oracle Multimedia

  • If I buy a mobile phone in usa, could use it in chili?

    I want to buy a mobile phone in usa but i don't know if it is going to work in chile.

    I highly recommend not dunking the phone into a hot bowl of chili
    But yes, it can be done, here are the supported carriers in Chile:
    http://support.apple.com/kb/HT1937

  • Image 10.7.3. Problems with settings when new image is used on another mac

    10.7.3 image.I create an image of 10.7.3 using disk utility with the "Require an admin password to access system preferences" checked under Security and Privacy, once i move the image to another mac it reverts and unchecks the setting "Require an admin password to access system preferences. There is no problems creating the image or loading the image on new mac. There is something that is reverting the setting from original image on new mac. I am not using a 3rd party software to create an image. As what i understand the image should exactly the same. Not sure what is causing these problems since it only happens when using 10.7.3 and did not happend on 10.7.2. Any feedback will be appreciated. thanks

    Also AppleScript for QuickTime player control is broken. Instead of moving playhead forward, this AppleScript now moves it backward!
    set the increment_amount to 40
    tell application "QuickTime Player"
              try
                        ignoring application responses
                                  tell document 1
                                            set the movie_length to the duration
                                            repeat
      step forward by the increment_amount
                                                      if the current time is equal to the movie_length then exit repeat
                                            end repeat
                                  end tell
                        end ignoring
              end try
              try
                        ignoring application responses
      play document 1
                        end ignoring
              end try
    end tell

  • Problem with Mobile Phone Samsung G800 when put in "data transfer" mode

    Greetings everyone.
    I have a Samsung SGH G800 Phone with a 4 GB SD on it. Everything works fine except from when the I connect the phone to the computer and enable "data transfer mode" which should make the phone appear as a hard disk on my iMac.
    the errors I'm getting from dmesg are these:
    isk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6276] [LBlkNum 0] [FSLogMsgID 1281672978] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1281672978] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6532] [LBlkNum 32] [FSLogMsgID 2089623797] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 2089623797] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6788] [LBlkNum 64] [FSLogMsgID 2018660302] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 2018660302] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7044] [LBlkNum 96] [FSLogMsgID 1586086454] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1586086454] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6540] [LBlkNum 33] [FSLogMsgID 1771542890] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1771542890] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6796] [LBlkNum 65] [FSLogMsgID 977677278] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 977677278] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7052] [LBlkNum 97] [FSLogMsgID 1983087645] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1983087645] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7308] [LBlkNum 129] [FSLogMsgID 1984679439] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1984679439] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7564] [LBlkNum 161] [FSLogMsgID 882699219] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 882699219] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7820] [LBlkNum 193] [FSLogMsgID 1191153157] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1191153157] [FSLogMsgOrder Last]
    Apparently it tries to mount the device but it gets an IO error, what could it be the reason in your opinion? It appears as a hardware level error to me, do you think is it so?
    thanks for your time in advance.

    HI,
    If you go here you will see your phone is not supported by Mac OS X 10.5.
    http://support.apple.com/kb/HT2824
    Carolyn
    Message was edited by: Carolyn Samit

  • Using Address Book with 2 mobile phones

    Since a few weeks I have a second mobile phone that I also use with iSync for contact and calendar synchronisation. The problem was that Address Book could only pair with / connect to the newly added phone, not the 'old phone' anymore.
    I found some old threads with the same problem stated, but no answers were given. I did find a fix for it though. I used the application Pref Setter to clear the preferences of Address Book (you can also delete the file located at: /library/preferences/com.apple.AddressBook.plist). Restart Address Book and the bleutooth mobile phone entry is now empty again. You will be able to choose a phone to pair with.
    However, if anyone knows how to use 2 phones simultaniously, please tell me!
    Powerbook 12"   Mac OS X (10.4.9)  

    You can't use Address Book with more than one phone at the same time unfortunately, it simply does not have this functionality.
    I developed a little application called "Reset Address Book Pairing" which does exactly that without deleting (and therefore losing) your Address Book preferences. Just one setting in the prefs actually needs changing.
    It's included with the Sony Ericsson Address Book Enabler, which adds Call & SMS support for over 40 new Sony Ericsson phones to the Mac Address Book.
    http://mobile.feisar.com/addressbook.html

  • How could I hold alive my mobile phone?

    Hello,
    I am writing an application for Java ME. My application has some actions which take some minutes. The problem occurs when my mobile phone, which I am using for tests, is going to standy-by after 2 minutes. This results in a black screen and a sleeping application. When I press a button to wake up the mpbile phone the application continues without any problems.
    It's desturbing when my mobile phone goes in stand-by. But I don't want to switch of the whole standy-by-modus of my mobile. What can I do to prevent my mobile going in stand-by? Is it possible to simulate a keypress?
    By the way, the methods pauseApp() or startApp() where not invoked when my mobile switch to stand-by.
    Has anybody an idea?
    Kind regards,
    Sascha
    P.S. Please excuse my bad english.

    Old thread deleted.

  • How can I swap phone numbers between Verizon and T-Mobile phones?

    I have Verizon and T-Mobile phones. My wife uses the T-mobile phone and I the Verzion phone. I was given a GSM iPhone 5 that I want to use on the T-mobile account, so I want to move the Verzion phone number to the T-Mobile phone and the T-Mobile number to the Verzion phone. I do not want to have to inform all our friends about the number swap. I also would like to maintain phones on different networks for reliability and connectivity assurance.
    I called the Verizon wireless number and the person couldn't help me. The best I can figure out is to give up on Verizon and move the Verizon phone number to a new T-mobile account.
    Any ideas?

    They are both 4g phones correct?  All verizon phones come unlocked.  If the verizon phone works with tmobile all you do is take the sim card out and stick it in the phone.   however when you do this it is going to erase everything on the phone so make sure you back it up before swaping sim.  As far as using the tmobile phone with verizon you would need to ask tmobile if the phone is unlocked

  • Survey through mobile phone

    Hi,
    I want to create a survey through mobile phones..Basically would like to create an application sort , which will send a survey form via sms and also record the response via a sms in a particular server. I have very little experience in java and J2me..and hence it would be great if someone can guide me..as to how I can go about doing this.....
    My requirement would be broadcast the survey form to the mobiles ...
    Basically what would be my basic requirements for this and how can I go about developing the application and also what would be the required harware??
    Looking foward to some help ...
    Thanks,
    Hitesh

    There are two approaches for this
    1. Connect your mobile phone to the server using the wired interface and use the hyperterminal utility to send SMS commands to the mobile
    phone
    2.use an SMS gateway to send your text messages . google it (sms gateway services) and you will be suprised by the number that turn up.
    Cheers

  • Emulator for mobile phone

    Hi all,
    I am new in working with mobile phones.
    I want to develop emulator which will communicate with mobile phones connected to PC using data cable.
    This connection would be a two-way connection and any change in either cell phone or GUI of emulator should be reflected in other component.
    Please let me know how to go for this.
    Thanks.

    you dont seem to want to do any of the thinking yourself here. Perhaps you should read more widely on the topic before wading into a complex task like this.

  • Problem if mail sent using sockets using j2me devices

    Hi,
    I have a strange problem. I am sending a mail using j2me ( using sockets ). The mail will be sent successfully. But when tried to access using pop service, that mail is never seen in the server.
    I sent a mail from j2me device to gmail account - I can see that mail using the gmail login, but using pop service i am not able to see that mail.
    If I send a mail from browser - I can see the mail in both, the browser and also the pop service.
    Can anyone explain what is the problem ?
    Thanks in advance

    Would you be so kind as to edit your original post and add [SOLVED] to the subject?
    Thanks,
    Craig...

  • LOCATION FINDING without using GPS using J2ME (in gsm network)

    I was wondering if it is possible for me to obtain the ID (name) of the tower my phone is communicating with using J2ME (in a GSM network). I`m developing for T610. The cell info display shows the name of the tower. Is there any way i can get that text into my java program? I`ve seen Nokia apps do it, but they are C++ apps.. Is the same thing possible with J2ME?

    Hi,
    Yes it is possible. Try to use receive CBS messages it will give you the location name. And moreover there are some handset model specific that you have to use. I was successful in doing the same for motorola devices.
    System.getProperty("IMSI")
    System.getProperty("CellID")
    System.getProperty("LocAreaCode")
    This will give you imsi, cellid and location area code and then try to receive cbs messages that will give you the location.
    It has been successfully implemented on motorola device
    Bye
    Sunil

  • Problems calling image on J2ME mobile phone screen

    I have an image size (160kb) of certain size and width. I am calling this image onto a mobile phone screen (j2me) and upon calling this image, I am getting OutOfMemoryException. Sometimes, I do get the partial image displayed on the phone screen.
    My requirement is either reduce the size of the image or avoid the OutOfMemoryException. Does anyone has gone through the similar situation. Any ideas on how to solve this problem is greatly appreciated.
    Thanks,
    coolers.

    Thanks for the response. I posted it there.
    Here is the link
    http://forum.java.sun.com/thread.jspa?threadID=682766
    Thanks,
    Coolers

Maybe you are looking for