Check if mobile phone got turned off using j2me application

hello
Is there any way to know if the mobile phone got turned off from my j2me application.
this is really urgent please help me out.

alyaitani wrote:
hello
Is there any way to know if the mobile phone got turned off from my j2me application.No. Why do you think you need to detect this?
this is really urgent please help me out.[http://catb.org/~esr/faqs/smart-questions.html#urgent]
db

Similar Messages

  • Problem in mobile phone camera Image retrieval using J2ME ...

    Hi
    I am doing video surveillance application with mobile phone ...
    but i am not able to get the images faster from my mobile phone ..
    I need atleast 2 photos /frames per second using J2ME ...
    wen i tried it , it is very slow and i am not able to get 2 frames per second ...
    can somebody help me ?

    That's quite a bunch of stuff you want to do there.
    Just a short hint for the image processing part here: You can ask any BufferedImage for it's raster (using getRaster()), and you can use the raster's getData() method to access the DataBuffer (the array storing the pixel values). It should be quite easy to split the DataBuffer into 9 tiles which you can then store as blobs. You can also use the DataBuffer to check for color values, or, if you don't want the trouble, you can always use the raster's getRBG(...) method - beware though, it's a lot slower for processing large quantities of pixels. Just another hint: you will have to cast the DataBuffer to it's real type if you want to access the pixel values, for example to DataBufferByte for most RGB images. You can use the DataBuffer's getType() method to determine which kind of buffer the image is using.

  • I was in the middle of using my iPhone 4 running on the latest iOS before iOS 6 and the screen went black but you can see it is still on because the color of the screen is blueish blackish like when your phone is turning off. Any suggestions?

    I was in the middle of using my iPhone 4 running on the latest iOS before iOS 6 and the screen went black but you can see it is still on because the color of the screen is blueish blackish like when your phone is turning off. Any suggestions?

    Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

  • HT201365 I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Help Please

    I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Can anyone help?

    If you know the password to your apple id login - you can then do a restoration once you have put your device into recovery mode using itunes.
    read this article to give you direction how to put your device into recovery mode.
    Once you have put in your apple id login and password this then will allow you to restore the device once the device is placed in recovery mode.
    good luck!
    http://support.apple.com/kb/ht1808

  • How can i see text messages people sent from when my phone was turned off?

    i was abroad for the past 3 months, and my phone was turned off (NOT deactivated). when i got back i received one text from 5 minutes before i had turned the phone on. I know for a fact that i should have received numerous texts/picture messages, etc. Is it too late to receive these in some way? There are also voicemails but i can accept that these are gone forever. Are pending texts/ whatever deleted after a certain amount of time?

    If the text message is not able to be delivered for 5 days, it is deleted - so only the most recent days would be coming when when you turned the phone back on. New voicemails would be saved until the mailbox is full, I would think.

  • Phone has turned off, lock button broken-Any suggestions?

    Hello, last night my phone randomly turned off. The lock button broke about a week ago, so I have no way to turn it back on. I left it plugged into the wall charger all night, but still no success. This morning, I tried plugging it into my laptop to back up my phone, but my computer will not even recognize that it has been plugged in. Do i simply need a new iPhone?

    Plug your iphone to your laptop and follow these steps:
    (This will connect your itunes to your iphone)
    1. Go to Control Panel (on your computer).
    2. Go to Hardware and Sound; Devices and Printers; Unspecified (look for Apple Mobile Device USB Driver)
    3. Right-click, then select properties on the menu list.
    4. Select the "Hardware" tab at the top  When the properties dialog box opens, once more select properties on the lower right hand button.
    5. Under the "Driver" tab menu, the update driver button will be grey and unselectable here. So you need to select and click "Change Settings" button located near the lower left corner of the general tab.
    6. Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
    7. Select "Update Driver".
    8. Select and click "Browse my computer for driver software".
    9. For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.  
    10. Click Next, and let the driver re-install.
    11. iTunes  11.1.4.62 should open automatically if your iphone is connected already

  • My iPhone 5 screen went black.  I cannot get the phone to turn off or respond to the awake button.  What to do?

    My Iphone 5 screen went bright white and then black.  The phone still rings, and I can hear Siri.  The phone will not turn off using the awake/sleep button. What to do?

    Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.

  • Anyway to have phone not turn off?

    I was wondering if there was any way that I could not have th phone option turned off. I'm not even sure if I would be able to receive calls when its turned off, and I don't really get why that would be an option(if it even is an option). I just got the phone today so I'm very new to it, and unfortunately I didn't receive a user manual with it. Any help would be greatly appreciated. Thanks
    Post relates to: Treo 650 (Verizon)

    Hello DangerKocan and welcome to the Palm forums.
    You can download the Palm Treo 650 user's guide and other important information from the Treo 650 support page.
    To answer your question, you don't have to turn the phone off. You can leave the cell radio on all the time if you wish. The screen will turn off after a few minutes depending on your settings in the Prefs application. If you need to turn the phone portion of your Treo off, you can do so by holding the red End/Power button for about 2 seconds. To turn it back on, hold the End/Power button for another 2 seconds.
    You can still receive calls when the screen is off. You won't be able to receive calls when the cell radio is powered down.
    Alan G

  • I can't get my phone to turn off

    My phone will turn off for 3-4 seconds, then power up again.  What should I do?
    Have tried holding both top and circle buttons at sametime, still does not work?

    Find a computer, ideally the one you normally use, then use recovery mode, as described here, to restore the phone:
    http://support.apple.com/kb/HT1808

  • HT201210 my i phone keeps turning off and turning back on cant play games because it turns off in the middle

    my i phone keeps turning off and turning back on cant play games because it turns off in the middle

    Which jailbreak are you using?

  • Smart quotes got turned off?

    Working in CS3. It appears that my smart quotes got turned off. Not sure where to turn them back on. Any advice?
    Thank you!

    It's in the Preferences. There is also a hotkey combo, but I always forget what it is -- you might have pressed it.

  • I downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm

    i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi  i try all the ways to turn it on but it didnt sucsses

    roaminggnome 
      thanks for helping but i didnt know that is the downgrade is forbidden  and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> 

  • Any time I open Safari i get a popup for myvdrive? why and how do I stop this? yes my safari preferences are checked that popups should be turned off.

    why and how do I stop this? yes my safari preferences are checked that popups should be turned off. Also it pops up any time that I click anywhere to do anything in safari. Please help.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My phone just turned off and will not go back on. my top lock button has been broken for over a year. Help!

    my phone just turned off and will not go back on. my top lock button has been broken for over a year. Help! I have tried plugging it into wall unit and computer but my home button just doesnt do anything!

    It seems that year long delay from having your lock button repaired has finally caught up to you.  Sounds like you have some damage to your phone that requires repair/replacement.  Take it to a Apple store or contact Apple Tech Support.

  • HT201412 after upgrading to newer iOS version 6 only my iphone 4 got turned off.

    hi ,
    after upgrading to newer iOS version 6 only my iphone 4 got turned off. it could not turned.. contacted apple store they tried all the option .. solution was replace with other iphone4 by paying £119, Which is really not the new one, its refurbished one..

    So what's your question?

Maybe you are looking for

  • Custom calculation script not working

    Hi... I've been looking at the samples and searching but have yet to make my custom calculation script work.  The bottom line is that I want one field to be blanked out if another is populated. My script currently looks like this: event.value = (getF

  • Problem Downloading Netweaver Trail Version

    Hi, I'm not sure I'm posting this in the right place. But I'm having a problem. I'm a newby to ABAP and I've been trying to download the Netweaver Trial version so I can get some hands-on. However, I can't seem to do so. I always get beyond the Licen

  • Finder crashes when Time Machine starts backup

    Hello, My finder/computer crashes at least once or twice a day when the Time Machine backups start (there are other times where the backup will go fine).  I am using a MacBook Pro, 2011 2.2 GHz i7 with 8GB of Ram.  I have a 64 GB Samsung SSD drive I

  • DWCS3 Float Drop Problem?

    My site passed the Browser compatibility check in DWCS3, however, after launching site online and viewing it on a IE6 PC computer, the home page does not display correctly: the center section drops down. I checked for a potential float drop problem b

  • My 4s suddenly tells me to double click for all functions. How do I revert to normal function please?

    My 4s suddenly tells me to double click for all functions. How do I revert to normal functions please?