Problem in performing subtotaling in ABAP ALV Report for GL Account ID

Hi,
I had developed a report in which i am displayng data on the basis of GL Account in a ALV Report. I want to display the sub-totaling on the different series of GL Account (i..e. 100000,400000 etc..) but at present this fucntionality is not possible right now. Is there method of doing it?

Hi,
Thanks ,i had solved the problem by taking a variable type string and the assigning the GL A/C ID in it and it is showing the data accuarately as per requierment..
Thanks everybody for valueable response.
Problem Solved.

Similar Messages

  • How to display subtotal text in alv report for particular group of values

    Hi,
    if material number falls 1 to 10 then i considered be calculate and display subtotal qty amount with subtotal text " Total of the mat1" and if material number falls 11 to 20 then again i need to be claculate and display subtotal qty amount with subtotal text "total of the mat2". if material number falls 21 to 30 then i don't want to display any subtotal and At last grand total also is not required.
    Please help me asap

    just check the thread...
    Can we modify a sub-total in ALV

  • Alv Report for invoice details

    Dear All,
                 I need to develop one alv report for following details. i developed coding for this requirment but i am getting some error.kindley help me to how to move data from different internal table to final internal table. I used LOOP AT and READ Statement even i didn't get any output.
    kindley help me out.
    TYPES: BEGIN OF XT_TAB,
             LIFNR  LIKE LFA1-LIFNR,
             NAME1  LIKE LFA1-NAME1,
             STCD1  LIKE LFA1-STCD1,
             STCD2  LIKE LFA1-STCD2,
             STCD3  LIKE LFA1-STCD3,
             STCD4  LIKE LFA1-STCD4,
           END OF XT_TAB.
    TYPES: BEGIN OF YT_TAB,
            BUKRS LIKE BSEG-BUKRS,
            BELNR LIKE BSEG-BELNR,
            BUZEI LIKE BSEG-BUZEI,
            LIFNR LIKE BSEG-LIFNR,
            GJAHR LIKE BSEG-GJAHR,
           END OF YT_TAB.
    TYPES: BEGIN OF ZT_TAB,
            LIFNR  LIKE LFA1-LIFNR,
            NAME1  LIKE LFA1-NAME1,
            STCD2  LIKE LFA1-STCD2,
            BELNR  LIKE BSEG-BELNR,
            BUZEI  LIKE BSEG-BUZEI,
            GJAHR  LIKE BSEG-GJAHR,
           END OF ZT_TAB.
           I N T E R N A L   T A B L E   D E C L A R A T I O N S         *
    *-----Internal table to store data
    DATA: ITAB1   TYPE STANDARD TABLE OF XT_TAB INITIAL SIZE 0,
          WA_TAB1 TYPE XT_TAB.
    DATA: ITAB2   TYPE STANDARD TABLE OF YT_TAB INITIAL SIZE 0,
          WA_TAB2 TYPE YT_TAB.
    DATA:   ITAB  TYPE STANDARD TABLE OF  ZT_TAB  WITH HEADER LINE,
            WA_ITAB TYPE ZT_TAB,
            ITAB_FINAL2 TYPE STANDARD TABLE OF ZT_TAB.
    DATA: ITAB_TEMP1 TYPE STANDARD TABLE OF ZT_TAB  WITH HEADER LINE.
                    Selection Screen Declarations                        *
    SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN begin OF LINE.
    SELECTION-SCREEN COMMENT (23) text-003 FOR FIELD P_LIFNR.
    PARAMETERS P_LIFNR LIKE LFA1-LIFNR OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK bk1.
    START-OF-SELECTION.
          PERFORM XTRACT_DATA.
    END-OF-SELECTION.
    *-----Filling the Output table
      PERFORM populate_main_table.
          PERFORM BUILD_FIELDCATALOG.
         PERFORM SORTING.
          PERFORM BUILD_LAYOUT.
          PERFORM BUILD_ALV_GRID_DISPLAY.
         Form  XTRACT_DATA
    FORM XTRACT_DATA .
    *SELECT
          a~LIFNR
          a~NAME1
          a~STCD2
          b~BELNR
          b~BUZEI
          b~GJAHR
    INTO TABLE ITAB
    FROM LFA1 as a INNER JOIN BSEG as b
      ON  aLIFNR = bLIFNR
    WHERE  a~LIFNR = P_LIFNR.
    SELECT LIFNR
           NAME1
           STCD1
           STCD2
           STCD3
           STCD4
      FROM LFA1
      INTO TABLE ITAB1
      WHERE LIFNR = P_LIFNR.
    IF NOT ITAB1[] IS INITIAL.
        SORT ITAB1 BY LIFNR.
        SELECT BELNR
               BUZEI
               LIFNR
               GJAHR
    INTO TABLE ITAB2
          FROM BSEG
    FOR ALL ENTRIES IN ITAB1
    WHERE LIFNR = ITAB1-LIFNR.
    ENDIF.
    ENDFORM.                    " XTRACT_DATA
    *&      Form  POPULATE_MAIN_TABLE
          text
    -->  p1        text
    <--  p2        text
    FORM POPULATE_MAIN_TABLE .
       LOOP AT ITAB1 INTO WA_TAB1.
               ITAB-LIFNR = ITAB1-LIFNR.
               ITAB-NAME1 = ITAB1-NAME1.
               ITAB-STCD2 = ITAB1-STCD2.
       READ TABLE ITAB2 INTO WA_TAB2 WITH KEY LIFNR = WA_TAB1-LIFNR.
               IF sy-subrc = 0.
               ITAB-BELNR = ITAB1-BELNR.
               ITAB-BUZEI = ITAB1-BUZEI.
               ITAB-GJAHR = ITAB1-GJAHR.
               ENDIF.
      ENDLOOP.
      ENDFORM.                    " POPULATE_MAIN_TABLE
         Form  BUILD_FIELDCATALOG
    FORM BUILD_FIELDCATALOG .
      REFRESH t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 1.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Vendor Number'.
      wa_fcat-seltext_m = 'Vendor Number'.
      wa_fcat-seltext_l = 'Vendor Number'.
      wa_fcat-fieldname = 'LIFNR'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 2.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Vendor Name'.
      wa_fcat-seltext_m = 'Vendor Name'.
      wa_fcat-seltext_l = 'Vendor Name'.
      wa_fcat-fieldname = 'NAME1'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 3.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Vendor TIN Number'.
      wa_fcat-seltext_m = 'Vendor TIN Number'.
      wa_fcat-seltext_l = 'Vendor TIN Number'.
      wa_fcat-fieldname = 'STCD2'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 4.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Document No'.
      wa_fcat-seltext_m = 'Document No'.
      wa_fcat-seltext_l = 'Document No'.
      wa_fcat-fieldname = 'BELNR'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 5.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Item Number'.
      wa_fcat-seltext_m = 'Item Number'.
      wa_fcat-seltext_l = 'Item Number'.
      wa_fcat-fieldname = 'BUZEI'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 6.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Fiscal Year'.
      wa_fcat-seltext_m = 'Fiscal Year'.
      wa_fcat-seltext_l = 'Fiscal Year'.
      wa_fcat-fieldname = 'GJAHR'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
    ENDFORM.                    " BUILD_FIELDCATALOG
         Form  BUILD_LAYOUT
    FORM BUILD_LAYOUT .
    GD_LAYOUT-NO_INPUT = 'X'.
    GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
    GD_LAYOUT-TOTALS_TEXT = 'TOTALS'.
    ENDFORM.                    " BUILD_LAYOUT
         Form  BUILD_ALV_GRID_DISPLAY
    FORM BUILD_ALV_GRID_DISPLAY .
    gd_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                i_callback_program      = gd_repid
                i_callback_top_of_page  = 'TOP-OF-PAGE'  "see FORM
                i_callback_user_command = 'USER_COMMAND'
                is_layout               = gd_layout
                it_fieldcat             = t_fcat[]
                it_events               = gt_events
                is_print                = gd_prntparams
                it_sort                 = it_sortcat[]
                i_save                  = 'X'
           TABLES
                t_outtab                = ITAB
           EXCEPTIONS
                program_error           = 1
                OTHERS                  = 2.
    thanks and regards
    Murugesh

    TYPES: BEGIN OF XT_TAB,
             LIFNR  LIKE LFA1-LIFNR,
             NAME1  LIKE LFA1-NAME1,
             STCD1  LIKE LFA1-STCD1,
             STCD2  LIKE LFA1-STCD2,
             STCD3  LIKE LFA1-STCD3,
             STCD4  LIKE LFA1-STCD4,
           END OF XT_TAB.
    TYPES: BEGIN OF YT_TAB,
            BUKRS LIKE BSEG-BUKRS,
            BELNR LIKE BSEG-BELNR,
            BUZEI LIKE BSEG-BUZEI,
            LIFNR LIKE BSEG-LIFNR,
            GJAHR LIKE BSEG-GJAHR,
           END OF YT_TAB.
    TYPES: BEGIN OF ZT_TAB,
            LIFNR  LIKE LFA1-LIFNR,
            NAME1  LIKE LFA1-NAME1,
            STCD2  LIKE LFA1-STCD2,
            BELNR  LIKE BSEG-BELNR,
            BUZEI  LIKE BSEG-BUZEI,
            GJAHR  LIKE BSEG-GJAHR,
           END OF ZT_TAB.
           I N T E R N A L   T A B L E   D E C L A R A T I O N S         *
    *-----Internal table to store data
    DATA: ITAB1   TYPE STANDARD TABLE OF XT_TAB INITIAL SIZE 0,
          WA_TAB1 TYPE XT_TAB.
    DATA: ITAB2   TYPE STANDARD TABLE OF YT_TAB INITIAL SIZE 0,
          WA_TAB2 TYPE YT_TAB.
    DATA:   ITAB  TYPE STANDARD TABLE OF  ZT_TAB  WITH HEADER LINE,
            WA_ITAB TYPE ZT_TAB,
            ITAB_FINAL2 TYPE STANDARD TABLE OF ZT_TAB.
    DATA: ITAB_TEMP1 TYPE STANDARD TABLE OF ZT_TAB  WITH HEADER LINE.
                    Selection Screen Declarations                        *
    SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN begin OF LINE.
    SELECTION-SCREEN COMMENT (23) text-003 FOR FIELD P_LIFNR.
    PARAMETERS P_LIFNR LIKE LFA1-LIFNR OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK bk1.
    START-OF-SELECTION.
          PERFORM XTRACT_DATA.
    END-OF-SELECTION.
    *-----Filling the Output table
      PERFORM populate_main_table.
          PERFORM BUILD_FIELDCATALOG.
         PERFORM SORTING.
          PERFORM BUILD_LAYOUT.
          PERFORM BUILD_ALV_GRID_DISPLAY.
         Form  XTRACT_DATA
    FORM XTRACT_DATA .
    *SELECT
          a~LIFNR
          a~NAME1
          a~STCD2
          b~BELNR
          b~BUZEI
          b~GJAHR
    INTO TABLE ITAB
    FROM LFA1 as a INNER JOIN BSEG as b
      ON  aLIFNR = bLIFNR
    WHERE  a~LIFNR = P_LIFNR.
    SELECT LIFNR
           NAME1
           STCD1
           STCD2
           STCD3
           STCD4
      FROM LFA1
      INTO TABLE ITAB1
      WHERE LIFNR = P_LIFNR.
    IF NOT ITAB1[] IS INITIAL.
        SORT ITAB1 BY LIFNR.
        SELECT BELNR
               BUZEI
               LIFNR
               GJAHR
    INTO TABLE ITAB2
          FROM BSEG
    FOR ALL ENTRIES IN ITAB1
    WHERE LIFNR = itab1-lifnr.
    ENDIF.
    ENDFORM.                    " XTRACT_DATA
    *&      Form  POPULATE_MAIN_TABLE
          text
    -->  p1        text
    <--  p2        text
    FORM POPULATE_MAIN_TABLE .
      LOOP AT ITAB1 INTO WA_TAB1.
              ITAB-LIFNR = ITAB1-LIFNR.
              ITAB-NAME1 = ITAB1-NAME1.
              ITAB-STCD2 = ITAB1-STCD2.
      READ TABLE ITAB2 INTO WA_TAB2 WITH KEY LIFNR = WA_TAB1-LIFNR.
              IF sy-subrc = 0.
              ITAB-BELNR = ITAB1-BELNR.
              ITAB-BUZEI = ITAB1-BUZEI.
              ITAB-GJAHR = ITAB1-GJAHR.
              ENDIF.
    ENDLOOP.
    LOOP AT itab1 INTO wa_tab1.
       MOVE:  wa_tab1-lifnr TO itab-lifnr,
              wa_tab1-name1 TO itab-name1,
              wa_tab1-stcd2 TO itab-stcd2.
          Append itab.
      READ TABLE itab2 TRANSPORTING NO FIELDS WITH KEY lifnr = wa_tab1-lifnr.
      IF sy-subrc eq 0.
        MOVE: wa_tab2-lifnr TO itab-lifnr,
              wa_tab2-belnr TO itab-belnr,
              wa_tab2-buzei TO itab-buzei,
              wa_tab2-gjahr TO itab-gjahr.
      Append itab.
    endif.
    endloop.
    *LOOP AT t_agr_tcodes INTO s_agr_tcodes.
    READ TABLE t_tstc
    TRANSPORTING NO FIELDS
    WITH KEY tcode = s_agr_tcodes-tcode.
    IF sy-subrc eq 0.
       MOVE: s_agr_tcodes-tcode TO it_agr_tcodes-tcode,
             s_agr_tcodes-agr_name to it_agr_tcodes-agr_name,
             t_tstc-pgmna to it_agr_pgmna.
    *Append it_agr_tcodes.
    *endif.
    *endloop.
      ENDFORM.                    " POPULATE_MAIN_TABLE
         Form  BUILD_FIELDCATALOG
    FORM BUILD_FIELDCATALOG .
      REFRESH t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 1.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Vendor Number'.
      wa_fcat-seltext_m = 'Vendor Number'.
      wa_fcat-seltext_l = 'Vendor Number'.
      wa_fcat-fieldname = 'LIFNR'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 2.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Vendor Name'.
      wa_fcat-seltext_m = 'Vendor Name'.
      wa_fcat-seltext_l = 'Vendor Name'.
      wa_fcat-fieldname = 'NAME1'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 3.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Vendor TIN Number'.
      wa_fcat-seltext_m = 'Vendor TIN Number'.
      wa_fcat-seltext_l = 'Vendor TIN Number'.
      wa_fcat-fieldname = 'STCD2'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 4.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Document No'.
      wa_fcat-seltext_m = 'Document No'.
      wa_fcat-seltext_l = 'Document No'.
      wa_fcat-fieldname = 'BELNR'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 5.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Item Number'.
      wa_fcat-seltext_m = 'Item Number'.
      wa_fcat-seltext_l = 'Item Number'.
      wa_fcat-fieldname = 'BUZEI'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
      wa_fcat-col_pos = 6.
      wa_fcat-row_pos = 1.
      wa_fcat-seltext_s = 'Fiscal Year'.
      wa_fcat-seltext_m = 'Fiscal Year'.
      wa_fcat-seltext_l = 'Fiscal Year'.
      wa_fcat-fieldname = 'GJAHR'.
      wa_fcat-tabname = 'ITAB'.
      APPEND wa_fcat TO t_fcat.
      CLEAR t_fcat.
    ENDFORM.                    " BUILD_FIELDCATALOG
         Form  BUILD_LAYOUT
    FORM BUILD_LAYOUT .
    GD_LAYOUT-NO_INPUT = 'X'.
    GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
    GD_LAYOUT-TOTALS_TEXT = 'TOTALS'.
    ENDFORM.                    " BUILD_LAYOUT
         Form  BUILD_ALV_GRID_DISPLAY
    FORM BUILD_ALV_GRID_DISPLAY .
    gd_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                i_callback_program      = gd_repid
                i_callback_top_of_page  = 'TOP-OF-PAGE'  "see FORM
                i_callback_user_command = 'USER_COMMAND'
                is_layout               = gd_layout
                it_fieldcat             = t_fcat[]
                it_events               = gt_events
                is_print                = gd_prntparams
                it_sort                 = it_sortcat[]
                i_save                  = 'X'
           TABLES
                t_outtab                = ITAB
           EXCEPTIONS
                program_error           = 1
                OTHERS                  = 2.
    Edited by: Murugesh P on Apr 6, 2009 10:54 AM
    Edited by: Murugesh P on Apr 6, 2009 10:54 AM

  • Devloped an ALV report for daily cash receipts for selected date range

    hi,   
                 how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

    Hi,
    You can develop simple reports using Report Painter.
    You may be also interested in:
    Check report SAPMF05A for credit memo
    See the following Std reports on Payment Advices execute the Tcodes:
    S_ALR_87009888
    S_ALR_87009889
    S_ALR_87009890
    S_ALR_87009891
    S_ALR_87009892
    S_ALR_87009893
    S_ALR_87009978
    S_ALR_87009979
    S_ALR_87009980
    S_ALR_87009981
    S_ALR_87009982
    S_ALR_87009983
    S_ALR_87010056
    S_ALR_87010057
    S_ALR_87010058
    S_ALR_87010059
    S_ALR_87010060
    S_ALR_87010061
    S_ALR_87010066
    S_ALR_87010067
    S_ALR_87012106
    S_ALR_87012107
    S_ALR_87012108
    S_ALR_87012109
    S_ALR_87012110
    S_ALR_87012111
    S_ALR_87012116
    S_ALR_87012117
    S_ALR_87012200
    S_ALR_87012201
    S_ALR_87012202
    S_ALR_870122
    S_ALR_87012204
    S_ALR_87012205
    S_ALR_87012350
    S_ALR_87012351
    S_ALR_87012352
    S_ALR_87012353
    S_ALR_87012354
    S_ALR_87012355
    sample ALV report:
    tables:
    marav. "Table MARA and table MAKT
    Data to be displayed in ALV
    Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
    matically determine the fieldstructure from this source program
    Data:
    begin of imat occurs 100,
    matnr like marav-matnr, "Material number
    maktx like marav-maktx, "Material short text
    matkl like marav-matkl, "Material group (so you can test to make
                            " intermediate sums)
    ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
                            "make sums)
    gewei like marav-gewei, "weight unit (just to be complete)
    end of imat.
    Other data needed
    field to store report name
    data i_repid like sy-repid.
    field to check table length
    data i_lines like sy-tabix.
    Data for ALV display
    TYPE-POOLS: SLIS.
    data int_fcat type SLIS_T_FIELDCAT_ALV.
    select-options:
    s_matnr for marav-matnr matchcode object MAT1.
    start-of-selection.
    read data into table imat
      select * from marav
      into corresponding fields of table imat
      where
      matnr in s_matnr.
    end-of-selection.
    Now, we start with ALV
    To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
    The fieldcatalouge can be generated by FUNCTION
    'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
    report source, including this report.
    The only problem one might have is that the report and table names
    need to be in capital letters. (I had it )
    Store report name
    i_repid = sy-repid.
    Create Fieldcatalogue from internal table
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
           EXPORTING
                I_PROGRAM_NAME         = sy-repid
                I_INTERNAL_TABNAME     = 'IMAT'  "capital letters!
                I_INCLNAME             = sy-repid
           CHANGING
                CT_FIELDCAT            = int_fcat
           EXCEPTIONS
                INCONSISTENT_INTERFACE = 1
                PROGRAM_ERROR          = 2
                OTHERS                 = 3.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                I_CALLBACK_PROGRAM       = i_repid
                I_STRUCTURE_NAME         = 'marav'
                I_DEFAULT                = 'X'
                I_SAVE                   = 'A'
           TABLES
                T_OUTTAB                 = imat.
      IF SY-SUBRC <> 0.
        WRITE: 'SY-SUBRC: ', SY-SUBRC .
      ENDIF.
    Hope this will help.
    Regards,
    Naveen.

  • ALV report for individual fields (urgent...........)

    Hi all,
    using this ZUS_SDN_THREE_ALV_GRIDS program structure i have generated the all the fields from table.
    could you please guide me how to generate the ALV report for splecific fileds from  individual tables.
    if i click in click on grid1 (that is sales header details) we need populate the item details in grid2 and paralally customer details in grid3.
    please guide me how to resolve the issuee..
    thanks in advance
    Srinivas...

    Hi,
    I have done an example, like on 1st grid it displays header data (EKKO) and when you double click on any record, for that PO you will get item details (EKPO) on 2nd grid,
    In the similar way, you can add one more grid and populate it with your own data simultaneously along with 2nd grid.
    *& Report  ZOOABAP1_SOW
    report  zabap2.
    *                     TABLES
    tables:ekko.
    *                     DATA DECLARATIONS
    data: grid1 type ref to cl_gui_alv_grid,
          grid2 type ref to cl_gui_alv_grid,
          container1 type ref to cl_gui_custom_container,
          container2 type ref to cl_gui_custom_container,
          flag.
    *                     INTERNAL TABLES
    data: it_ekko type table of ekko.
    data: wa_ekko like line of it_ekko.
    data: it_ekpo type table of ekpo.
    data: it_fcat1 type lvc_t_fcat,
          wa_fcat1 type lvc_s_fcat,
          it_fcat2 type lvc_t_fcat,
          wa_fcat2 type lvc_s_fcat,
          wa_layout1 type lvc_s_layo,
          wa_layout2 type lvc_s_layo,
          wa_variant type disvariant.
    *                     SELECTION-SCREEN
    selection-screen begin of block b with frame title text-s01.
    select-options: s_ebeln for ekko-ebeln.
    selection-screen end of block b.
    *       CLASS lcl1 DEFINITION
    class lcl1 definition.
      public section.
        methods:
          handler_dbl_clk for event double_click
                                      of cl_gui_alv_grid
                                         importing e_row.
    endclass.                    "lcl1 DEFINITION
    *       CLASS lcl1 IMPLEMENTATION
    class lcl1 implementation.
      method handler_dbl_clk.
        read table it_ekko into wa_ekko index e_row-index.
        if sy-subrc = 0.
          perform get_ekpo.
        endif.
      endmethod.                    "handler_dbl_clk
    endclass.                    "lcl1 IMPLEMENTATION
    *                     START_OF_SELECTION
    start-of-selection.
    * Get PO header data
      perform get_ekko.
    * screen for container
      call screen 100.
    *&      Module  STATUS_0100  OUTPUT
    *       text
    module status_0100 output.
      set pf-status 'PFS'.
      set titlebar 'TIT'.
      data: obj type ref to lcl1.
      if flag is initial.
        create object container1
          exporting
            container_name = 'CONT1'.
        create object container2
          exporting
            container_name = 'CONT2'.
        create object grid1
          exporting
            i_parent = container1.
        create object grid2
          exporting
            i_parent = container2.
        create object obj.
        set handler obj->handler_dbl_clk for grid1.
        perform build_fcat.
        perform build_layout.
        call method grid1->set_table_for_first_display
           exporting
    *        i_buffer_active               =
    *        i_bypassing_buffer            =
    *        i_consistency_check           =
    *          i_structure_name              = 'EKKO'
    *        is_variant                    = wa_variant
            i_save                        = 'X'
    *        i_default                     = 'X'
            is_layout                     = wa_layout1
    *        is_print                      =
    *        it_special_groups             =
    *        it_toolbar_excluding          =
    *        it_hyperlink                  =
    *        it_alv_graphics               =
    *        it_except_qinfo               =
    *        ir_salv_adapter               =
              changing
                it_outtab                     = it_ekko
                it_fieldcatalog               = it_fcat1
    *        it_sort                       =
    *        it_filter                     =
    *      EXCEPTIONS
    *        invalid_parameter_combination = 1
    *        program_error                 = 2
    *        too_many_lines                = 3
    *        others                        = 4
        if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        endif.
        flag = 'X'.
      endif.
    endmodule.                 " STATUS_0100  OUTPUT
    *&      Form  get_ekko
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form get_ekko .
      select ebeln bsart lifnr
             from ekko
             into corresponding fields of table it_ekko
             where ebeln in s_ebeln.
    endform.                    " get_ekko
    *&      Form  GET_EKPO
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form get_ekpo .
      select ebeln ebelp menge meins peinh from ekpo
       into corresponding fields of table it_ekpo
       where ebeln = wa_ekko-ebeln.
      if not it_ekpo[] is initial.
        call method grid2->set_table_for_first_display
      exporting
    *    i_buffer_active               =
    *    i_bypassing_buffer            =
    *    i_consistency_check           =
    *    i_structure_name              =
    *    is_variant                    =
    *    i_save                        =
    *    i_default                     = 'X'
        is_layout                     = wa_layout2
    *    is_print                      =
    *    it_special_groups             =
    *    it_toolbar_excluding          =
    *    it_hyperlink                  =
    *    it_alv_graphics               =
    *    it_except_qinfo               =
    *    ir_salv_adapter               =
          changing
            it_outtab                     = it_ekpo
            it_fieldcatalog               = it_fcat2
    *    it_sort                       =
    *    it_filter                     =
    *  EXCEPTIONS
    *    invalid_parameter_combination = 1
    *    program_error                 = 2
    *    too_many_lines                = 3
    *    others                        = 4
        if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        endif.
      endif.
    endform.                    " GET_EKPO
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    module user_command_0100 input.
      case sy-ucomm.
        when 'BACK' or 'EXIT' or 'CANC'.
          call method container1->free.
          call method container2->free.
          leave to screen 0.
      endcase.
    endmodule.                 " USER_COMMAND_0100  INPUT
    *&      Form  build_fcat
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form build_fcat .
    * fieldcatalog for EKKO table
      wa_fcat1-col_pos = '1'.
      wa_fcat1-fieldname = 'EBELN'.
      wa_fcat1-tabname = 'EKKO'.
      wa_fcat1-coltext = 'PO No.'.
      append wa_fcat1 to it_fcat1.
      clear wa_fcat1.
      wa_fcat1-col_pos = '2'.
      wa_fcat1-fieldname = 'BSART'.
      wa_fcat1-tabname = 'EKKO'.
      wa_fcat1-coltext = 'PO Type'.
      append wa_fcat1 to it_fcat1.
      clear wa_fcat1.
      wa_fcat1-col_pos = '3'.
      wa_fcat1-fieldname = 'LIFNR'.
      wa_fcat1-tabname = 'EKKO'.
      wa_fcat1-coltext = 'Vendor No.'.
      append wa_fcat1 to it_fcat1.
      clear wa_fcat1.
    * fieldcatalog for EKPO table
      wa_fcat2-col_pos = '1'.
      wa_fcat2-fieldname = 'EBELN'.
      wa_fcat2-tabname = 'EKPO'.
      wa_fcat2-coltext = 'PO No.'.
      append wa_fcat2 to it_fcat2.
      clear wa_fcat2.
      wa_fcat2-col_pos = '2'.
      wa_fcat2-fieldname = 'EBELP'.
      wa_fcat2-tabname = 'EKPO'.
      wa_fcat2-coltext = 'PO Item'.
      append wa_fcat2 to it_fcat2.
      clear wa_fcat2.
      wa_fcat2-col_pos = '3'.
      wa_fcat2-fieldname = 'MENGE'.
      wa_fcat2-tabname = 'EKPO'.
      wa_fcat2-coltext = 'Quantity'.
      append wa_fcat2 to it_fcat2.
      clear wa_fcat2.
      wa_fcat2-col_pos = '4'.
      wa_fcat2-fieldname = 'MEINS'.
      wa_fcat2-tabname = 'EKPO'.
      wa_fcat2-coltext = 'UOM'.
      append wa_fcat2 to it_fcat2.
      clear wa_fcat2.
      wa_fcat2-col_pos = '5'.
      wa_fcat2-fieldname = 'PEINH'.
      wa_fcat2-tabname = 'EKPO'.
      wa_fcat2-coltext = 'Price Unit'.
      append wa_fcat2 to it_fcat2.
      clear wa_fcat2.
    endform.                    " build_fcat
    *&      Form  build_layout
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form build_layout .
      clear wa_layout1.
      wa_layout1-grid_title = 'Header data'.
    *  wa_layout-sel_mode = 'A'.             "allow to select multiple lines
      clear wa_layout2.
      wa_layout2-grid_title = 'Item Data'.
    endform.                    " build_layout
    If you have any poblems while doing this, post it.
    Do reward points for all helpful answers
    Regards,
    Sowjanya

  • Alv report for multiple record insertion

    hi,
    i'm new to abap. i'm using alv report for record display and insertion. how can i insert multiple records from alv to my table??

    well that can be achieved only by running BDC inside alv report to enter the entries.and in that too you can append or edit single entries only
    reward if useful
    regards
    vivek

  • Devolped an ALV report for daily cash receipts for selected date range

    hi,   
                 how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

    hi,   
                 how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

  • ALV report for Purchase Requisitions(PR)

    Hai All!
      i am developing an ALV report for Purchase Requisitions(PR) tht are not approved ( ie IN RELEASE status), so i want to get who has approved PR and who has not approved it... from which table & which field i can get this data...
    plz help me

    Hi Following fields are used to set / reset release of PR
    EBAN-FRGKZ
    EBAN-FRGZU
    EBAN-FRGST.
    You will have to understand combination of these field from MM Fuctional Consultant.
    rgds
    rajesh
    Edited by: RAJESH KUMAR on Aug 6, 2008 12:18 PM

  • STandard Report for GL Account balances

    Hi,
    I am looking for a standard report for GL Account balances in the following :-
    Opening Blanace          Tranasactions during the month                               Closing Balance                       
                                          Debit                       Credit
    REgards,
    RAJ

    I am looking for LINE ITEM WISE REPORT for GL Accounts in the following format:-
    Opening Balance  
    Transactions during the month (DR  and Credit )        
    Closing Balance
    REgards,
    Raj

  • Standard report for Reconciliation report for Asset Accounting and GL

    is ther any standard report for Reconciliation report for Asset Accounting and GL

    hi
    functional specification r reqired for this issue
    regards
    venkataswamy

  • Problem with subtotal calculation in ALV reports

    Hi All,
       I am doing one program for calculating subtoals in ALV . For this i want to display subtotal text at each envey subtotal 's row.
    For that i have created one form 'SUB_SUBTOT_TEXT' and it has given to IT_EVENTS-FORM. But SUB_SUBTOT_TEXT Form is not called by IT_EVENTS event.
    what are all the mandatories for displaying subtotal text.
    Can any one please help me.
    Thanks in Advance.

    Hi Sree,
    *& Table declaration
    &----TABLES: ekko.&----
    *& Type pool declaration
    TYPE-POOLS: slis. " Type pool for ALV&----
    *& Selection screen
    SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.&----
    *& Type declaration
    &----* Type declaration for internal table to store EKPO data
    TYPES: BEGIN OF x_data,
           ebeln  TYPE char30,  " Document no.
           ebelp  TYPE ebelp,   " Item no
           matnr  TYPE matnr,   " Material no
           matnr1 TYPE matnr,   " Material no
           werks  TYPE werks_d, " Plant
           werks1 TYPE werks_d, " Plant
           ntgew  TYPE entge,   " Net weight
           gewe   TYPE egewe,   " Unit of weight                          
           END OF x_data.&----
    *& Internal table declaration
    DATA:* Internal table to store EKPO data
      i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
    Internal table for storing field catalog information
      i_fieldcat TYPE slis_t_fieldcat_alv,
    Internal table for Top of Page info. in ALV Display
      i_alv_top_of_page TYPE slis_t_listheader,
    Internal table for ALV Display events
      i_events TYPE slis_t_event,
    Internal table for storing ALV sort information
      i_sort TYPE  slis_t_sortinfo_alv,
      i_event TYPE slis_t_event.&----
    *& Work area declaration
    &----DATA:
      wa_ekko TYPE x_data,
      wa_layout     TYPE slis_layout_alv,
      wa_events         TYPE slis_alv_event,
      wa_sort TYPE slis_sortinfo_alv.&----
    *& Constant declaration
    &----CONSTANTS:
       c_header   TYPE char1
                  VALUE 'H',                    "Header in ALV
       c_item     TYPE char1
                  VALUE 'S'.&----
    *& Start-of-selection event
    &----START-OF-SELECTION.* Select data from ekpo
      SELECT ebeln " Doc no
             ebelp " Item
             matnr " Material
             matnr " Material
             werks " Plant
             werks " Plant
             ntgew " Quantity
             gewei " Unit
             FROM ekpo
             INTO TABLE i_ekpo
             WHERE ebeln IN s_ebeln
             AND ntgew NE '0.00'.  IF sy-subrc = 0.
        SORT i_ekpo BY ebeln ebelp matnr .
      ENDIF.* To build the Page header
      PERFORM sub_build_header.* To prepare field catalog
      PERFORM sub_field_catalog.* Perform to populate the layout structure
      PERFORM sub_populate_layout.* Perform to populate the sort table.
      PERFORM sub_populate_sort.* Perform to populate ALV event
      PERFORM sub_get_event.END-OF-SELECTION.* Perform to display ALV report
      PERFORM sub_alv_report_display.
    *&      Form  sub_build_header
          To build the header
          No Parameter
    FORM sub_build_header .* Local data declaration
      DATA: l_system     TYPE char10 ,          "System id
            l_r_line     TYPE slis_listheader,  "Hold list header
            l_date       TYPE char10,           "Date
            l_time       TYPE char10,           "Time
            l_success_records TYPE i,           "No of success records
            l_title(300) TYPE c.                " Title
    Title  Display
      l_r_line-typ = c_header.               " header
      l_title = 'Test report'(001).
      l_r_line-info = l_title.
      APPEND l_r_line TO i_alv_top_of_page.
      CLEAR l_r_line.* Run date Display
      CLEAR l_date.
      l_r_line-typ  = c_item.                " Item
      WRITE: sy-datum  TO l_date MM/DD/YYYY.
      l_r_line-key = 'Run Date :'(002).
      l_r_line-info = l_date.
      APPEND l_r_line TO i_alv_top_of_page.
      CLEAR: l_r_line,
             l_date.ENDFORM.                    " sub_build_header
    *&      Form  sub_field_catalog
          Build Field Catalog
          No Parameter
    FORM sub_field_catalog .*  Build Field Catalog
      PERFORM sub_fill_alv_field_catalog USING:     '01' '01' 'EBELN' 'I_EKPO' 'L'
         'Doc No'(003) ' ' ' ' ' ' ' ',     '01' '02' 'EBELP' 'I_EKPO' 'L'
         'Item No'(004) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR' 'I_EKPO' 'L'
         'Material No'(005) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR1' 'I_EKPO' 'L'
         'Material No'(005) ' ' ' ' ' ' ' ',
         '01' '04' 'WERKS' 'I_EKPO' 'L'
         'Plant'(006) 'X' 'X' ' ' ' ',     '01' '04' 'WERKS1' 'I_EKPO' 'L'
         'Plant'(006) ' ' ' ' ' ' ' ',     '01' '05' 'NTGEW' 'I_EKPO' 'R'
         'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM.                    " sub_field_catalog&----
    *&     Form  sub_fill_alv_field_catalog
    *&     For building Field Catalog
    *&     p_rowpos   Row position
    *&     p_colpos   Col position
    *&     p_fldnam   Fldname
    *&     p_tabnam   Tabname
    *&     p_justif   Justification
    *&     p_seltext  Seltext
    *&     p_out      no out
    *&     p_tech     Technical field
    *&     p_qfield   Quantity field
    *&     p_qtab     Quantity table
    FORM sub_fill_alv_field_catalog  USING  p_rowpos    TYPE sycurow
                                            p_colpos    TYPE sycucol
                                            p_fldnam    TYPE fieldname
                                            p_tabnam    TYPE tabname
                                            p_justif    TYPE char1
                                            p_seltext   TYPE dd03p-scrtext_l
                                            p_out       TYPE char1
                                            p_tech      TYPE char1
                                            p_qfield    TYPE slis_fieldname
                                            p_qtab      TYPE slis_tabname.* Local declaration for field catalog
      DATA: wa_lfl_fcat    TYPE  slis_fieldcat_alv.  wa_lfl_fcat-row_pos        =  p_rowpos.     "Row
      wa_lfl_fcat-col_pos        =  p_colpos.     "Column
      wa_lfl_fcat-fieldname      =  p_fldnam.     "Field Name
      wa_lfl_fcat-tabname        =  p_tabnam.     "Internal Table Name
      wa_lfl_fcat-just           =  p_justif.     "Screen Justified
      wa_lfl_fcat-seltext_l      =  p_seltext.    "Field Text
      wa_lfl_fcat-no_out         =  p_out.        "No output
      wa_lfl_fcat-tech           =  p_tech.       "Technical field
      wa_lfl_fcat-qfieldname     =  p_qfield.     "Quantity unit
      wa_lfl_fcat-qtabname       =  p_qtab .      "Quantity table  IF p_fldnam = 'NTGEW'.
        wa_lfl_fcat-do_sum  = 'X'.
      ENDIF.
      APPEND wa_lfl_fcat TO i_fieldcat.
      CLEAR wa_lfl_fcat.
    ENDFORM.                    " sub_fill_alv_field_catalog&----
    *&      Form  sub_populate_layout
          Populate ALV layout
          No Parameter
    FORM sub_populate_layout .  CLEAR wa_layout.
      wa_layout-colwidth_optimize = 'X'." Optimization of Col widthENDFORM.                    " sub_populate_layout&----
    *&      Form  sub_populate_sort
          Populate ALV sort table
          No Parameter
    FORM sub_populate_sort .* Sort on material
      wa_sort-spos = '01' .
      wa_sort-fieldname = 'MATNR'.
      wa_sort-tabname = 'I_EKPO'.
      wa_sort-up = 'X'.
      wa_sort-subtot = 'X'.
      APPEND wa_sort TO i_sort .
      CLEAR wa_sort.* Sort on plant
      wa_sort-spos = '02'.
      wa_sort-fieldname = 'WERKS'.
      wa_sort-tabname = 'I_EKPO'.
      wa_sort-up = 'X'.
      wa_sort-subtot = 'X'.
      APPEND wa_sort TO i_sort .
      CLEAR wa_sort.
    ENDFORM.                    " sub_populate_sort&----
    *&      Form  sub_get_event
          Get ALV grid event and pass the form name to subtotal_text
          event
          No Parameter
    FORM sub_get_event .
      CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
    'SUBTOTAL_TEXT'.  DATA: l_s_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type     = 4
        IMPORTING
          et_events       = i_event
        EXCEPTIONS
          list_type_wrong = 0
          OTHERS          = 0.* Subtotal
      READ TABLE i_event  INTO l_s_event
                        WITH KEY name = slis_ev_subtotal_text.
      IF sy-subrc = 0.
        MOVE c_formname_subtotal_text TO l_s_event-form.
        MODIFY i_event FROM l_s_event INDEX sy-tabix.
      ENDIF.ENDFORM.                    " sub_get_event&----
    *&      Form  sub_alv_report_display
          For ALV Report Display
          No Parameter
    FORM sub_alv_report_display .
      DATA: l_repid TYPE syrepid .
      l_repid = sy-repid .* This function module for displaying the ALV report
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = l_repid
          i_callback_top_of_page   = 'SUB_ALV_TOP_OF_PAGE'
          is_layout                = wa_layout
          it_fieldcat              = i_fieldcat
          it_sort = i_sort
          it_events                = i_event
          i_default                = 'X'
          i_save                   = 'A'
        TABLES
          t_outtab                 = i_ekpo
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
       MESSAGE i000 WITH 'Error in ALV report display'(055).
      ENDIF.ENDFORM.                    " sub_alv_report_display&----
          FORM sub_alv_top_of_page
          Call ALV top of page
          No parameter
    ----FORM sub_alv_top_of_page.                                   "#EC CALLED* To write header for the ALV
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = i_alv_top_of_page.
    ENDFORM.                    "alv_top_of_page&----
    *&      Form  subtotal_text
          Build subtotal text
          P_total  Total
          p_subtot_text Subtotal text info
    FORM subtotal_text CHANGING
                   p_total TYPE any
                   p_subtot_text TYPE slis_subtot_text.
    Material level sub total
      IF p_subtot_text-criteria = 'MATNR'.
        p_subtot_text-display_text_for_subtotal
        = 'Material level total'(009).
      ENDIF.* Plant level sub total
      IF p_subtot_text-criteria = 'WERKS'.
        p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
      ENDIF.
    ENDFORM.                    "subtotal_text
    Hopes its helpful.
    Regards,
    Raj.

  • How we can sort subtotal results value in abap alv report

    Hi, How we can sort subtotal results value in abap alv report

    Thanks a lot for your code
    but i am still getting double and weird results.
    Subtotal     IN     PARTY              KGS        TOTAL VALUE
         1     40008     3,141.20     192,799.00
         1     40008     16,681.06     1,908,659.00
    Subtotal     1          19,822.25     2,101,458.00
         10     40022     4,590.60     531,228.00
         10     40022     3,448.27     377,173.00
    Subtotal     10          8,038.87     908,401.00
         100     40010     270.172     19,852.00
    Subtotal     100          270.172     19,852.00
         101     40036     752.898     61,051.00
         101     40036     207.586     19,431.00
    Subtotal     101          960.484     80,482.00
         102     40048     325.936     32,154.00
         102     40048     264.32     19,364.00
    Subtotal     102          590.256     51,518.00
         103     40066     216.134     18,088.00
    Subtotal     103          216.134     18,088.00
         104     40001     231.96     16,986.00
    Subtotal     104          231.96     16,986.00
         105     40021     585.918     65,461.00
         105     40021     108.683     15,825.00
    Subtotal     105          694.601     81,286.00
         106     40046     209.777     15,341.00
    Subtotal     106          209.777     15,341.00
         107     40043     167.353     14,755.00
    Subtotal     107          167.353     14,755.00
         108     40046     153.023     14,343.00
         108     40046     342.348     32,223.00
    Subtotal     108          495.371     46,566.00
         109     40008     184.085     13,483.00
    Subtotal     109          184.085     13,483.00
         11     40011     5,275.63     524,232.69
         11     40011     6,723.28     643,911.82
    Subtotal     11          11,998.90     1,168,144.51
         110     40067     142.113     13,333.00
         110     40067     492.883     44,428.00
    Subtotal     110          634.996     57,761.00
         111     40040     118.961     13,190.00
         111     40040     492.433     60,029.00
    Subtotal     111          611.394     73,219.00
    Edited by: Timaji Sawant on Feb 16, 2012 12:16 PM
    Edited by: Timaji Sawant on Feb 17, 2012 9:27 AM

  • Problem in Data Display in Dynamic ALV Report

    Hi all,
    I am developing a Dynamic ALV report where I want display material batch (zjpack_base-charg) in column and Material (zjpack_base-matnr) & Qty (Zjpack_base-netwr) field row wise.My intention is to show report datewise for a material how many batch developed with there qty.I am sending you the code which i already wrote.Here column is developed batchwise but I am not able to show the qty against each batch.Please see my code and guide me how to display.
    REPORT  zdynamic_test                           .
    *REPORT  ztest_notepad.
    *& Declarations
    *Type-pools
    TYPE-POOLS: slis.
    *TABLES
    TABLES: zjpack_base.
    *Types
    TYPES:
          ty_fcat      TYPE lvc_s_fcat,
          ty_fcatalog  TYPE slis_fieldcat_alv.
    *Work areas
    DATA:
          wa_fcat      TYPE ty_fcat,
          wa_fcatalog  TYPE ty_fcatalog.
    *Internal tables
    DATA:
          it_fcat      TYPE STANDARD TABLE OF ty_fcat,
          it_fcatalog  TYPE STANDARD TABLE OF ty_fcatalog.
    *Type reference
    DATA:
          it_dyn_tab   TYPE REF TO data,
          wa_newline   TYPE REF TO data.
    *INTERNAL TABLE
    DATA: BEGIN OF it_itab OCCURS 0.
            INCLUDE STRUCTURE zjpack_base.
    DATA: END OF it_itab.
    *Filed symbols
    FIELD-SYMBOLS:
          <gt_table>   TYPE STANDARD TABLE,
          <fs_dyntable>,
          <fs_fldval>  TYPE ANY,
          <l_field>    TYPE ANY.
    *Variables
    DATA:
          l_fieldname  TYPE lvc_s_fcat-fieldname,
          l_tabname    TYPE lvc_s_fcat-tabname,
          l_fieldtext  TYPE lvc_s_fcat-seltext,
          l_index      TYPE char2.
    "Selection-screen
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s11 .
    SELECT-OPTIONS:s_matnr FOR zjpack_base-matnr.
    SELECT-OPTIONS:s_charg FOR zjpack_base-charg.
    SELECT-OPTIONS:s_fdate FOR zjpack_base-fdate .
    SELECTION-SCREEN END OF BLOCK b1.
    PARAMETERS:
             p_colms   TYPE i.
    *& start-of-selection.
    START-OF-SELECTION.
      PERFORM select_data.
      PERFORM build_fieldcat.
      PERFORM create_dynamic_table.
    DO 20 TIMES.
       DO p_colms TIMES.
         l_index = sy-index.
         CONCATENATE 'FIELD' l_index INTO l_fieldname.
         ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
         <l_field> = sy-index.
       ENDDO.
       INSERT <fs_dyntable> INTO TABLE <gt_table>.
    ENDDO.
      LOOP AT it_itab.
        l_index = sy-tabix.
        CONCATENATE 'FIELD' l_index INTO l_fieldname.
        ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
        <l_field> = it_itab-matnr.
        INSERT <fs_dyntable> INTO TABLE <gt_table>.
      ENDLOOP.
      LOOP AT it_fcat INTO wa_fcat.
        PERFORM fieldcatalog1 USING: wa_fcat-fieldname
                                      wa_fcat-tabname
                                      wa_fcat-seltext.
      ENDLOOP.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          i_callback_program = 'ZTEST_NOTEPAD'
          it_fieldcat        = it_fcatalog
        TABLES
          t_outtab           = <gt_table>.
    *&      Form  BUILD_FIELDCAT
    FORM build_fieldcat .
    CLEAR: l_fieldname,
            l_tabname,
            l_fieldtext,
            l_index.
    DO  p_colms TIMES.
       CLEAR l_index.
       l_index = sy-index.
       CONCATENATE 'FIELD' l_index INTO l_fieldname.
       CONCATENATE 'Field' l_index INTO l_fieldtext.
       l_tabname = '<GT_TABLE>'.
       PERFORM fieldcatalog USING: l_fieldname
                                   l_tabname
                                   l_fieldtext.
    ENDDO.
    ENDFORM.                    " BUILD_FIELDCAT
    *&      Form  CREATE_DYNAMIC_TABLE
    FORM create_dynamic_table .
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = it_fcat
        IMPORTING
          ep_table        = it_dyn_tab.
      ASSIGN it_dyn_tab->* TO <gt_table>.
    Create dynamic work area and assign to FS
      CREATE DATA wa_newline LIKE LINE OF <gt_table>.
      ASSIGN wa_newline->* TO <fs_dyntable>.
    ENDFORM.                    " CREATE_DYNAMIC_TABLE
    *&      Form  FIELDCATALOG
    FORM fieldcatalog USING field table f_txt.
      wa_fcat-fieldname = field.
      wa_fcat-tabname   = table.
      wa_fcat-seltext = f_txt.
      APPEND wa_fcat TO it_fcat.
      CLEAR  wa_fcat.
    ENDFORM.                    " FIELDCATALOG
    *&      Form  FIELDCATALOG1
    FORM fieldcatalog1 USING field table f_txt.
      wa_fcatalog-fieldname = field.
      wa_fcatalog-tabname   = table.
      wa_fcatalog-seltext_m = f_txt.
      APPEND wa_fcatalog TO it_fcatalog.
      CLEAR  wa_fcatalog.
    ENDFORM.                    " FIELDCATALOG1
    *&      Form  SELECT_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM select_data .
    DATA: v_srlno TYPE i.
      SELECT matnr charg blqty
      INTO CORRESPONDING FIELDS OF it_itab
      FROM zjpack_base
      WHERE matnr IN s_matnr
      AND   charg IN s_charg
      AND   fdate IN s_fdate.
        COLLECT it_itab.
      ENDSELECT.
    v_srlno.
    LOOP AT it_itab.
       v_srlno = v_srlno + 1.
    ENDLOOP.
      CLEAR: l_fieldname,
              l_tabname,
              l_fieldtext,
              l_index.
    1st Field
    l_index = sy-tabix.
      CONCATENATE 'FIELD' '1' INTO l_fieldname.
      l_fieldtext = 'MATNR'.
      l_tabname = '<GT_TABLE>'.
      PERFORM fieldcatalog USING: l_fieldname
                                  l_tabname
                                  l_fieldtext.
    Other fields
      LOOP AT it_itab.
        CLEAR l_index.
        l_index = sy-tabix + 1.
        CONCATENATE 'FIELD' l_index INTO l_fieldname.
        CONCATENATE 'CHARG-' it_itab-charg INTO l_fieldtext.
        l_tabname = '<GT_TABLE>'.
        PERFORM fieldcatalog USING: l_fieldname
                                    l_tabname
                                    l_fieldtext.
      ENDLOOP.
    Please guide me how my problem will solve.
    Thanks & Regards
    Nirmal

    Hi all, I am developing a Dynamic ALV report where I want display material batch (zjpack_base-charg) in column and Material (zjpack_base-matnr) & Qty (Zjpack_base-netwr) field row wise.My intention is to show report datewise for a material how many batch developed with there qty.I am sending you the code which i already wrote.Here column is developed batchwise but I am not able to show the qty against each batch.Please see my code and guide me how to display.
    *& Report  ZDYNAMIC_TEST                                               *
    REPORT  zdynamic_test                           .
    *REPORT  ztest_notepad.
    *& Declarations
    *Type-pools
    TYPE-POOLS: slis.
    *TABLES
    TABLES: zjpack_base.
    *Types
    TYPES:
          ty_fcat      TYPE lvc_s_fcat,
          ty_fcatalog  TYPE slis_fieldcat_alv.
    *Work areas
    DATA:
          wa_fcat      TYPE ty_fcat,
          wa_fcatalog  TYPE ty_fcatalog.
    *Internal tables
    DATA:
          it_fcat      TYPE STANDARD TABLE OF ty_fcat,
          it_fcatalog  TYPE STANDARD TABLE OF ty_fcatalog.
    *Type reference
    DATA:
          it_dyn_tab   TYPE REF TO data,
          wa_newline   TYPE REF TO data.
    *INTERNAL TABLE
    DATA: BEGIN OF it_itab OCCURS 0.
            INCLUDE STRUCTURE zjpack_base.
    DATA: END OF it_itab.
    *Filed symbols
    FIELD-SYMBOLS:
          <gt_table>   TYPE STANDARD TABLE,
          <fs_dyntable>,
          <fs_fldval>  TYPE ANY,
          <l_field>    TYPE ANY.
    *Variables
    DATA:
          l_fieldname  TYPE lvc_s_fcat-fieldname,
          l_tabname    TYPE lvc_s_fcat-tabname,
          l_fieldtext  TYPE lvc_s_fcat-seltext,
          l_index      TYPE char2.
    "Selection-screen
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s11 .
    SELECT-OPTIONS:s_matnr FOR zjpack_base-matnr.
    SELECT-OPTIONS:s_charg FOR zjpack_base-charg.
    SELECT-OPTIONS:s_fdate FOR zjpack_base-fdate .
    SELECTION-SCREEN END OF BLOCK b1.
    PARAMETERS:
             p_colms   TYPE i.
    *& start-of-selection.
    START-OF-SELECTION.
      PERFORM select_data.
      PERFORM build_fieldcat.
      PERFORM create_dynamic_table.
    *  DO 20 TIMES.
    *    DO p_colms TIMES.
    *      l_index = sy-index.
    *      CONCATENATE 'FIELD' l_index INTO l_fieldname.
    *      ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
    *      <l_field> = sy-index.
    *    ENDDO.
    *    INSERT <fs_dyntable> INTO TABLE <gt_table>.
    *  ENDDO.
      LOOP AT it_itab.
        l_index = sy-tabix.
        CONCATENATE 'FIELD' l_index INTO l_fieldname.
        ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
        <l_field> = it_itab-matnr.
        INSERT <fs_dyntable> INTO TABLE <gt_table>.
      ENDLOOP.
      LOOP AT it_fcat INTO wa_fcat.
        PERFORM fieldcatalog1 USING: wa_fcat-fieldname
                                      wa_fcat-tabname
                                      wa_fcat-seltext.
      ENDLOOP.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          i_callback_program = 'ZTEST_NOTEPAD'
          it_fieldcat        = it_fcatalog
        TABLES
          t_outtab           = <gt_table>.
    *&      Form  BUILD_FIELDCAT
    FORM build_fieldcat .
    *  CLEAR: l_fieldname,
    *         l_tabname,
    *         l_fieldtext,
    *         l_index.
    *  DO  p_colms TIMES.
    *    CLEAR l_index.
    *    l_index = sy-index.
    *    CONCATENATE 'FIELD' l_index INTO l_fieldname.
    *    CONCATENATE 'Field' l_index INTO l_fieldtext.
    *    l_tabname = '<GT_TABLE>'.
    *    PERFORM fieldcatalog USING: l_fieldname
    *                                l_tabname
    *                                l_fieldtext.
    *  ENDDO.
    ENDFORM.                    " BUILD_FIELDCAT
    *&      Form  CREATE_DYNAMIC_TABLE
    FORM create_dynamic_table .
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = it_fcat
        IMPORTING
          ep_table        = it_dyn_tab.
      ASSIGN it_dyn_tab->* TO <gt_table>.
    * Create dynamic work area and assign to FS
      CREATE DATA wa_newline LIKE LINE OF <gt_table>.
      ASSIGN wa_newline->* TO <fs_dyntable>.
    ENDFORM.                    " CREATE_DYNAMIC_TABLE
    *&      Form  FIELDCATALOG
    FORM fieldcatalog USING field table f_txt.
      wa_fcat-fieldname = field.
      wa_fcat-tabname   = table.
      wa_fcat-seltext = f_txt.
      APPEND wa_fcat TO it_fcat.
      CLEAR  wa_fcat.
    ENDFORM.                    " FIELDCATALOG
    *&      Form  FIELDCATALOG1
    FORM fieldcatalog1 USING field table f_txt.
      wa_fcatalog-fieldname = field.
      wa_fcatalog-tabname   = table.
      wa_fcatalog-seltext_m = f_txt.
      APPEND wa_fcatalog TO it_fcatalog.
      CLEAR  wa_fcatalog.
    ENDFORM.                    " FIELDCATALOG1
    *&      Form  SELECT_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM select_data .
    *  DATA: v_srlno TYPE i.
      SELECT matnr charg blqty
      INTO CORRESPONDING FIELDS OF it_itab
      FROM zjpack_base
      WHERE matnr IN s_matnr
      AND   charg IN s_charg
      AND   fdate IN s_fdate.
        COLLECT it_itab.
      ENDSELECT.
    *  v_srlno.
    *  LOOP AT it_itab.
    *    v_srlno = v_srlno + 1.
    *  ENDLOOP.
      CLEAR: l_fieldname,
              l_tabname,
              l_fieldtext,
              l_index.
    * 1st Field
    *  l_index = sy-tabix.
      CONCATENATE 'FIELD' '1' INTO l_fieldname.
      l_fieldtext = 'MATNR'.
      l_tabname = '<GT_TABLE>'.
      PERFORM fieldcatalog USING: l_fieldname
                                  l_tabname
                                  l_fieldtext.
    * Other fields
      LOOP AT it_itab.
        CLEAR l_index.
        l_index = sy-tabix + 1.
        CONCATENATE 'FIELD' l_index INTO l_fieldname.
        CONCATENATE 'CHARG-' it_itab-charg INTO l_fieldtext.
        l_tabname = '<GT_TABLE>'.
        PERFORM fieldcatalog USING: l_fieldname
                                    l_tabname
                                    l_fieldtext.
      ENDLOOP.
    ENDFORM.                    " SELECT_DATA

  • Subtotal  function in ALV report

    Hi, experts,
    I got a problem when creating an ALV report about billing document.
    This ALV report include following info&#65306;
    Billing date
    Billing doc no.
    Customer no.
    Customer name
    Material no.
    Material name
    Condition name
    Qty
    Unit price
    Amount
    Tax amount
    Invoice total
    The logic of subtotal for this report is:
    In same billing document no.
    1. If condition name=A, then subtotal Qty, Amount, Invoice total by material no.
    2. If condition name &#8800;A, then subtotal Qty, Amount , Invoice total by condition name
    Is it possible? How can I achieve it?

    Hi,
    Please find details on how to modify ALV report below:
    /people/ravikumar.allampallam/blog/2005/12/05/need-a-way-to-change-appearance-of-a-standard-existing-alv-report
    <b>Reward if helpful.</b>

  • ABAP-ALV Reports

    what are the sub gropus in ALV reports and how to display them?

    The commonly used ALV functions used for this purpose are;
    1. REUSE_ALV_VARIANT_DEFAULT_GET
    2. REUSE_ALV_VARIANT_F4
    3. REUSE_ALV_VARIANT_EXISTENCE
    4. REUSE_ALV_EVENTS_GET
    5. REUSE_ALV_COMMENTARY_WRITE
    6. REUSE_ALV_FIELDCATALOG_MERGE
    7. REUSE_ALV_LIST_DISPLAY
    8. REUSE_ALV_GRID_DISPLAY
    9. REUSE_ALV_POPUP_TO_SELECT
    Also refer this for some explanations
    A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
    The important parameters are :
    I. Export :
    i. I_callback_program : report id
    ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
    iii. I_callback_user_command : routine where the function codes are handled
    iv. I_structure name : name of the dictionary table
    v. Is_layout : structure to set the layout of the report
    vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
    vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
    II. Tables :
    i. t_outtab : internal table with the data to be output
    B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
    The Important Parameters are :
    I. Export :
    i. I_program_name : report id
    ii. I_internal_tabname : the internal output table
    iii. I_inclname : include or the report name where all the dynamic forms are handled.
    II Changing
    ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
    declared in the type pool SLIS.
    C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
    Parameters :
    I. Import :
    Et_Events : The event table is returned with all possible CALLBACK events
    for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
    II. Export :
    I_List_type :
    0 = simple list REUSE_ALV_LIST_DISPLAY
    1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
    2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
    3 = hierarchical-sequential block list
    REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
    Parameters :
    I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
    This internal table has three fields :
    Typ : ‘H’ – header, ‘S’ – selection , ‘A’ - action
    Key : only when typ is ‘S’.
    Info : the text to be printed
    E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
    Parameters : same as reuse_alv_list_display
    This is an example for simple list.
    2. BLOCK REPORT
    This is used to have multiple lists continuously.
    The important functions used in this report are:
    A. REUSE_ALV_BLOCK_LIST_INIT
    B. REUSE_ALV_BLOCK_LIST_APPEND
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    A. REUSE_ALV_BLOCK_LIST_INIT
    Parameters:
    I. I_CALLBACK_PROGRAM
    II. I_CALLBACK_PF_STATUS_SET
    III. I_CALLBACK_USER_COMMAND
    This function module is used to set the default gui status etc.
    B. REUSE_ALV_BLOCK_LIST_APPEND
    Parameters :
    Export :
    I. is_layout : layout settings for block
    II. it_fieldcat : field catalog
    III. i_tabname : internal table name with output data
    IV. it_events : internal table with all possible events
    Tables :
    i. t_outtab : internal table with output data.
    This function module adds the data to the block.
    Repeat this function for all the different blocks to be displayed one after the other.
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    This function module is used for hierarchical sequential blocks.
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    Parameters : All the parameters are optional.
    This function module display the list with data appended by the above function.
    Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
    3. Hierarchical reports :
    Hierarchical sequential list output.
    The function module is
    A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
    Parameters:
    I. Export:
    i. I_CALLBACK_PROGRAM
    ii. I_CALLBACK_PF_STATUS_SET
    iii. I_CALLBACK_USER_COMMAND
    iv. IS_LAYOUT
    v. IT_FIELDCAT
    vi. IT_EVENTS
    vii. i_tabname_header : Name of the internal table in the program containing the
    output data of the highest hierarchy level.
    viii. i_tabname_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    ix. is_keyinfo : This structure contains the header and item table field
    names which link the two tables (shared key).
    II. Tables
    i. t_outtab_header : Header table with data to be output
    ii. t_outtab_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using ‘REUSE_ALV_FIELDCATALOG_MERGE’.
    Important Attributes :
    A. col_pos : position of the column
    B. fieldname : internal fieldname
    C. tabname : internal table name
    D. ref_fieldname : fieldname (dictionary)
    E. ref_tabname : table (dictionary)
    F. key(1) : column with key-color
    G. icon(1) : icon
    H. symbol(1) : symbol
    I. checkbox(1) : checkbox
    J. just(1) : (R)ight (L)eft (C)ent.
    K. do_sum(1) : sum up
    L. no_out(1) : (O)blig.(X)no out
    M. outputlen : output length
    N. seltext_l : long key word
    O. seltext_m : middle key word
    P. seltext_s : short key word
    Q. reptext_ddic : heading (ddic)
    R. ddictxt(1) : (S)hort (M)iddle (L)ong
    S. datatype : datatype
    T. hotspot(1) : hotspot
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    regards,
    srinivas
    <b>*reward for useful answers*</b>

Maybe you are looking for

  • How can I get the Cover Flow text to be in all caps

    I've only had one problem with the Cover Flow application for iTunes. All of my track names, artists, and album names are in caps on my library. When I switch to the Cover Flow view some songs are displayed with all caps, while others have the song a

  • How do I reinstall airport management in Lion Server?

    Short of doing a completely new install is there a way to get back the management of Time Capsule in the Server App? Thanks in adavance for replying Joe

  • Entry Point Drop Site Key (to 9 chars) = LOCY11740 has no effect

    We have the following entry in two places within our .PST file. Entry Point Drop Site Key (to 9 chars) = LOCY11740 I am expecting to see "LOCY11740" in position 52 of the .CSM mail.dat file.  Instead I see "ORIGIN".  We are testing using Presort rel

  • X230, All touch/pen input functions stop working intermittently

    Hello, Ever since I got my x230 tablet (used), the pen/touch input intermittently stops working.  It never happens when I'm using it, but when I either power down the tablet or resume from sleep, the touch and the pen will not function.  The rotate b

  • Sadmind for solaris 10

    Dear All , I have a task to include the option -S 2 for sadmind service in /etc/inetd.conf. But in Solaris 10, there is no sadmind service configured in /etc/inetd.conf and SMF as well. Please advice how to configure in sadmind service in Soalris 10.