Problem in PI Sheet Print out

Dear PP Guys
I am facing a problem while taking Print out of PI sheet in PDF format...
The Contents of the PI sheet are getting out of the std A4 size paper.
How can we fit the PI sheet content to a A4 size paper while taking print
We are using EHP 4.0 pack and SAP R/3 ECC6.4
Regds
RB

hi Kunal
The solution i identified for this error ,
If i give some othere number in serial number display befor goint to printer selection screen
Its not showing any error .
but if i giv same challan number in serial number befor printer selection screen , then its showing error
If u have any idea , y its not allowing , ..?? u can explain me
Thanks

Similar Messages

Smartforms -Page Skipping Problem in Continue Sheet Printing.....

Hi Gurus,
I face problem with multiple page printing in dot matrix printer for purchase order printing.
Here are the details about my requirement
Our client Purchase order pre-printed Paper size Width 303 mm Height 203 mm and continued sheet. I have created a z layout zpoprint for the above size and assigned it in smarforms and select DINA4 transverse in printer. Whenever we printing 2nd page it starts printing after 5 cm. My friends asked me to create a customized page format in server properties in printer. Is there any other way to overcome this issue? Anybody face this problem kindly reply to me.
By
SP. Manavalan

Hi
Though you can double check the page layouts of both pages of your smartform, also keep in consideration that using a dot matrix printer to get the output of smartforms will have some impact of the positioning of the print as dot matrix printers are mechanical in nature(wheels are moving!).
Whereas, in laser printers, the whole data is taken, formatted and then sent to print.
Regards
Raj

VF02 Print Out Problem

Hi all,
We are facing the problem while taking the print out from VF02.
We are using ZFORM designed by our ABAPer.
While using standard form (LB_BIL_INVOICE) its working and while using ZFORM, we are able to see the print preview but not able to take the print out.
Error message is shown as given below
"Output could not be issued"
Message no. VF304
Diagnosis
An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
Procedure
Check possible causes of the problem.
Thanks in advance,
Babs

Hi babs
Go to VV32 and check wheather the condition record has been maintained or not.In VV32 .
check the access sequence , wheather it is billing type / payer in your output type RD00 .so only for that particular payer only that ouput may be generating . .But also see in the V/40 wheather for the billng type the ZFORM which you have created has been assigned or not .
Regards
Srinath

Print out for PO

hi,
im facing the problem while giving the print out - ME9F.
not getting any print out when im giving..
can any one guide me.. wat is the procedure for printing PO & how to follow up the error
thanks in advance

Hello,
first of all go to transaction ME22N or ME23N , then get the Purchase Order you want to print-out and press the push-button "Messages" or follow the menu path "Go to --> Messages": here you should find the messages available for print-out linked to that document. Here you can see their status, print medium and time: if no message is listed here, so you won't be able to print anything with ME9F fot that document.
Hope to be useful.
Best regards,
Andrea

Scrolling more lines when print out is taken in continuous page

Hi
I have created new page format and added it to format and then to device by using spad.
This new page size is 8 X 6 Portrait
the problem is that when print out is taken by using script the first page of the first document is correctly printed , But from second document onward the printer scrolls more than required, the print out is taken in continues page.
Where to set the scrolling space and all
Hoping help

I have already tried all these solutions but NONE of them work.
I recently (last week) bought a new printer & had a reformat. The problem didn't exist before then

A serious problem with AAR 5.0 in printing out a book

I have written a book in MS Word 2000 and I converted it in a PDF file with AR 5.0
Then I tried to print it out as a book.
I rotated the pages and included two A4 pages in one so that an A4 sheet to have 4 pages on both sides.
In order to do this trick, I rotated the horizontal text page
to vertical position on the left side for printing out the page 1 and on the right side for printing out the page 2. This must be done in order to have the 4 pages printed out in a sequence and in an A4 sheet.
The procedure is as follows:
First, I print out the page one (1) while having my PDF text page rotated vertically on the left side and the printing out is successful.
Then I rotate again the page vertically to face on the right side to print out the page two (2) in the same sheet.
Here is where the problem begins.
The page 1 is printed out well BUT its top/bottom margin is different than the page 2, which is printed in a lower position on the A4 sheet.
The margins all around the page look perfect but the two of them are printed out with one line lower that makes one page higher or lower than the other and not in a straight line as it is supposed to be.
I have tried to find out what causes this problem with no success so I am into contact with you requesting an immediate help. I know that it is a small but serious problem particularly for my case as an author and I believe that the solution can be given only by an expert of Adobe Acrobat 5.O
Please, inform me about any adjustment that must be done to solve this margin situation (problem) as I know that AAR 5.0 is an excellent software and can do this work for me.
Regards,
Emmanouel

This has nothing to do with Adobe's OpenType development tools, which is the purpose of this forum. I think you need to post this in the Acrobat Windows forum!
Regards,
T

Print out of GI inspection sheet

I am facing one problem from an user pertaining to automatic print out of GI inspection sheet.Here first goods receipt takes place with movement type 103 and then goods are placed into unrestricted stock through movement type 105(placing material into unrestricted stock).Immediately when posting the 105 document , a goods issue inspection sheet is printed automatically
from a designated printer
The quality department have given few SAP user ID and have asked that the given user IDS also need to have automatic printing faciility when 105 document is posted
Can any one help me in providing this solution.
Manash Das

Hi Manash,
The user needs to set the Parameter 'NDR' in uppercase for the user account (tcode SU3)
NDR : Print via output control in MM - Inventory management.
This will ensure that the Material Document is printed at the time of the goods movement.
I hope this helps,
Elaine.

PROBLEM P.O PRINT OUT T-CODE-ME9F

Dera cons
I have a p.o having lot of items. when i want to print out the order item in pre printed sheet of p.o by using T-CODE ME9F.For this order item when we print it it is taking 10 pages because the item number is more. we want to print only last two pages i.e- 9 & 10. WHERE CAN WE MAKE SETTING SO THAT AS PER OUR REQUIREMENT WE WILL PRINT OUR DOCUMENT. I am not getting the solution WHEN i give the print it is taking all the 10 pages. pl. solve the problem.
thanks
nirupama

Hi
You have the solution in ME9F itself.
When you execute your document number, you will find a push button <b>"output message"</b>. When you pres this, a dialogue box opens where you have the option of printing the required page.
If you want to print page 9 and 10, your input in the required field will be <b>9,10</b>
Please try this and revert.
Reward if you you get the required printout.
Regards
Vijay

Contact Sheet Printing Problems

I have been trying to print contact sheets starting with version 1.1 and I'm still not able to print them in 2.1.
Ligthroom will generate the file but the printers (I tried 3 printers) are reporting error messages (Status Error - Printing). The file just stay in the queue for ever or I delete it. First I thought it had to be a printer problem so I tried to print the contact sheets in Draft Mode. That worked and everything was fine except the quality of the pictures on the contact sheet was so bad - unusable.
Now I have tried different relosutions from 150 to 250 and nothing works. Well, not quite nothing. I can print out one contact sheet with up to 20 pictures, but as soon as I need more than one sheet it fails.
I'm also running into the same problem with color shifts printing from Lightroom compared to Photoshop. Also, the speed seems to be very slow. I have about 30,000 slides in my library and I'm constantly waiting until LR catches up.

I was experiencing the same thing (in 4.1RC2). Tried to print a 158-image contact sheet (4 pgs), and it would want to render every image first.
Here's my solution:
I went back to the Library module, selected all the photos I wanted to print, and made sure they all had standard previews rendered. Then I was able to go back and print as draft (to printer, pdf, and jpg) with lightning speed.
Hope that helps,
Cory
**UPDATE**
Today I tried to print another contact sheet, with all previews rendered, and it's being slow again. Apparently my solution doesn't really work 100%. Yeah, it's like Jeckyll and Hyde...

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Problem in Print Out of ALV report

Dear All..
I am trying to take print out of an ALV report. there are 36 columns in my report. when i try to take print out, warning appears which says system cannot print the last 277 columns of report.
i have tried using different formats for printer like :
Format                  Description
X_PAPER                 ABAP/4 list: Default list formatting
X_SPOOLERR          ABAP list: Spooler problem report
ZX_65_284               65 Rows and 285 Columns
X_65_255                ABAP/4 list: At least 65 rows with a maximum number of c
X_65_200                ABAP list: at least 65 lines with 200 columns (not for a
X_58_170                ABAP/4 list: At least 58 rows by 170 columns
X_65_132                ABAP list: At least 65 rows by 132 columns
X_90_120                ABAP list: At least 90 rows by 120 columns
X_44_120                ABAP/4 list: At least 44 rows by 120 columns
X_65_80                 ABAP/4 list: At least 65 rows by 80 columns
but every time the same message appears even on A3 size paper..
i am using REUSE_ALV_GRID_DISPLAY to display ALV.
Please help to to take out prints(can be in condensed mode) so that all columns appear on the print out..

HI sujeet,
Thanks for ur response. i had already checked the printer settings.. i think there is no problem with this. Can u Please suggest something else. thanks
Hiii jyojit..
Thanks for reply. I had already checked the said check box in spool admin. but the problem still exists. Please suggest something to get rid of the problem.

Problem printing out to a parallelport printer

Hello, I am using the javax.comm.*; package and I am having problems
printing to the parallelport.
Well, it prints out the string but the problem is that the light for paper feed
starts blinking eventhough there is paper , once I click the paper feed button
the printer then prints out the string.
So, basically, everything is ok, apart from that I have to press the paper feed
button for each time I want to print something.
There is an error in my code somewhere, but as I am new to port communications I cannot understand what to do.
Below is my code, please help.
Thanks!
public void print(String s){
Enumeration ports;
CommPortIdentifier portId;
     try{
          portId = CommPortIdentifier.getPortIdentifier("LPT1");
         addPort(portId,s);
     }catch (NoSuchPortException e){
                 e.printStackTrace();
public static void addPort(CommPortIdentifier portId,String s){
     try{
          ParallelPort port = (ParallelPort)portId.open("LPT1",2000);
        /*port.notifyOnError(true);
        port.notifyOnBuffer(true);
        port.addEventListener(new ParallelPortEventListener(){
               public void parallelEvent(ParallelPortEvent ppe){
                       System.out.println(ppe.toString());
                       System.out.println("An event has occured");
          try{
               OutputStream os = port.getOutputStream();
               if(os == null){
                    System.out.println("Os is null");
               else{
                      os.write(s.getBytes());
               //os.flush();
          catch(Exception eis){
               eis.printStackTrace();
          port.close();
     catch(PortInUseException e){
          System.out.println(e.currentOwner);
          e.printStackTrace();
     catch(Exception ecl){
          ecl.printStackTrace();
}Of course this class imports :
import java.util.Enumeration;
import javax.comm.*;
import javax.comm.CommPort;
import javax.comm.CommPortIdentifier;
import javax.comm.ParallelPort;
import javax.comm.NoSuchPortException;
import javax.comm.PortInUseException;
import java.io.*;

Wow - I wonder how the OP thought that the
Developers Home > Developer Forums > Java Forums >
Java Mobility Forums > Consumer and Commerce >Consumer and Commerce General >
Forum was a correct choice for this problem??It's the same logic that leads one to believe that being new to port communications omits them from the responsibility of using general troubleshooting techniques to isolate/identify a problem.
This logic often leads to obscure questions also, sadly.

Problem report only print out when i click back button

hi all..i having problem with my report print program. the problem is my report did not immediately print out when i click print button. the program require me to click back button before print out execute. please help me to solve this problem. Thank you.
Edited by: padile on Jan 7, 2010 3:51 AM

Hi,
In your program, mention the following:
DATA: gs_out_opt TYPE ssfcompop.
gs_out_opt-tdimmed = 'X'           "Print immediately
CALL FUNCTION lv_fname         "Smartform FM
      EXPORTING
        output_options     = gs_out_opt
Regards,
Dawood.

ALV Report with Logo .. Print Out Problem

Hello Guys..
I am facing and differerent problem , I have created one Report in ALV contain logo of my company and some other details as per selection screen.
At the time of taking printoput the logo is not coming in print out only report data is coming.
How I take logo and ALV report in one print out .
Please do the needful.
Regards
Swati....

We Can't take logo of ALV in print out.

Alv report Print out Problem

Hi Experts,
I am having problem while taking print out of Alv report format. In that report, 1 column contains Unit Values.
Eg. Unit value - 'LE' , AFTER USING CONVERSION EXIT LOGIC it is converted into 'AU' which is finally displayed in the Alv -Report display format.
while taking Print-out of that report , that field Unit Value 'AU' is Shown in this format "****'.
Please give me your Valuable Suggestions.
Thanks and Regards
BalaNarasimman M

while defining filed catalog define the data type also
clear l_fieldcat.
l_fieldcat-fieldname = 'MEINS'.
l_fieldcat-datatype = 'UNIT'.
l_fieldcat-no_out = ' '.
l_fieldcat-do_sum = 'X'.
l_fieldcat-seltext_l = 'UOM'.
append l_fieldcat to p_fieldtab.
may be it would help.
anya

Problem in PI Sheet Print out

Similar Messages

Maybe you are looking for