Problem in print after fullscreen

Hi All,
I got a printJob object in Flash CS5. When I execute the print function, the flashplayer exits the fullscreen mode when the printing window appears.
This problem only occurs in windows.
Does anybody know how to solve this problem?

Hey Yogesh,
If you are just looking for the Document number then the tables
VBRP LIPS and VBAP are sufficient.
Please paste your select query for me to get a clear picture. anyways here is the flow
Table VBRP
VBRP-AUBEL = Sale order No
VBRP-AUPOS = Line item No
VBRP-VGBEL = Delivery order No
VBRP-VGPOS = Line item No
Table LIPS
LIPS-VGBEL = Sale Order No
LIPS-VGPOS = Line item No
Hope this helps
Regards,
Ravi

Similar Messages

Problem with printing after migrating from 3.5 to 4.1

Hello everyone,
I'm currently working on an application that was recently migrated (by someone else) from Flex 3.5 to Flex 4.1 and I discovered the printing doesn't work properly anymore. So I tried to find out what the problem was and after many tries, I came to the conclusion that the problem was within the following line:
printJob.addObject(myPrintView,FlexPrintJobScaleType.MATCH_WIDTH);
(Of course "myPrintView" is not the real name used in the app but that's not important)
I searched on the Internet and this line is supposed to work in 4.1, isn't it? However, the printed version cuts my PrintAdvancedDataGrid approximately in half. I tried to change the width property from myPrintView but the grid is still cut at the same place, its cells are just distorted.
FYI, you can find a part of the code right here:
var printJob:FlexPrintJob = new FlexPrintJob();
                    if (printJob.start()) {
     //A lot of code to build the print view
myPrintView.width=1280;
printJob.addObject(myPrintView,FlexPrintJobScaleType.MATCH_WIDTH);
printJob.send();
myPanel.removeChild(myPrintView);
Any help would be appreciated.
Regards,
Gudril

While looking for a solution on the Internet I found some people having troubles because of the structure of their AdvancedDataGrid. My problem doesn't come from any example I've seen but maybe it's still linked to that, so here's an AdvancedDataGrid that's being printed in my app:
                                                <mx:PrintAdvancedDataGrid dataProvider="{dataRayon}" sortExpertMode="true" id="dataGridRayon" width="100%" itemClick="dispatchEvent(new KpiEvent(DATAGRID_RAYON_CLICK,event));" itemDoubleClick="dispatchEvent(new KpiEvent(DATAGRID_RAYON_CLICK,event));" creationComplete="resizeGridRayon();" >
                                                  <mx:columns>
                                                            <mx:AdvancedDataGridColumn id="rownumRayon" width="25" sortable="false" labelFunction="getRowNumRayon" fontWeight="bold"/>
                                                            <mx:AdvancedDataGridColumn id="rayonCoRgrp" textAlign="center" width="75" headerText="{resourceManager.getString('rentabilitePanel', 'CODE')}" dataField="co_rgrp_produits" />
                                                            <mx:AdvancedDataGridColumn textAlign="left" width="240" headerText="{resourceManager.getString('rentabilitePanel', 'SOUS_SECTEURS')}" dataField="libelle" id="hTDataGridRayon" />
                                                            <mx:AdvancedDataGridColumn id="rayonMeVenteHt" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'MONTANT_VENTE_HT')}" dataField="meVenteHt" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'meVenteHt');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonMargeAvtDem" textAlign="right" width="75" headerText="{resourceManager.getString('rentabilitePanel', 'MARGE_AVT_DEM')}" dataField="margeAvtDem" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAvtDem');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonPMargeAvtDem" textAlign="right" width="80" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_MARGE_AVT_DEM')}" dataField="margeAvtDemP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAvtDemP');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonDemarqueHt" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'DEMARQUE_HT')}" dataField="demarque" formatter="{currencyFormatterFloat1Dec}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'demarque');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonPDemarqueHt" textAlign="right" width="85" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_DEMARQUE_HT')}" dataField="demarqueP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'demarqueP');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonMargeAprDem" textAlign="right" width="100" headerText="{resourceManager.getString('rentabilitePanel', 'MARGE_APR_DEM')}" dataField="margeAprDem" formatter="{currencyFormatter}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAprDem');}}" />
                                                            <mx:AdvancedDataGridColumn id="rayonPMargeAprDem" textAlign="right" width="115" headerText="{resourceManager.getString('rentabilitePanel', 'POUR_MARGE_APR_DEM')}" dataField="margeAprDemP" formatter="{pourcentageFormatterFloat}" sortCompareFunction="{function(obj1:Object, obj2:Object):int{return mySortFunc(obj1, obj2, 'margeAprDemP');}}" />
                                                  </mx:columns>
                                        </mx:PrintAdvancedDataGrid>
I also realised I wasn't very clear on the outcome of my doPrint() function. When I said the grid was cut in half, I was talking about half the columns not showing on the printed version, not half the rows. Actually even a column being cut in half. I hope these precisions made my problem a bit clearer and somebody will be able to help me in any way (even just hints).
Thanks for your help.
Regards,
Gudril

Laserjet 3050 - problems to print after update to Yosemite

Since I updated to Yosemite, I am having problems printing pdf and image files. Just after clicking "print", the printer says "Printing Document" while the green light flashes. However, nothing happens. The printer goes back to "ready" mode without any printed page.
Other documents from safari, etc. can be printed.
I have seen other people have the same problems but I have not seen a solution.
Can someone help me?

You might try installing the 3rd Party Gutenprint driver for your LaserJet 3050. It may provide better support for your printer then the Apple provided driver in Yosemite. You can download this driver here: http://gimp-print.sourceforge.net/MacOSX.php
I am an HP employee.
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

Problem with printing after upgrade

Hi, all.
I recently upgrade from 4.10 to 5.0 sp6a, and have this problem.
When i print anything, it doesnt start on the printer until i get out the
program.
The programas are all in clipper. This did not happend before with 4.10,
and the programs
hasnt been changed, the captures are the same. Any idea?
Thanks
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

Leonardo,
Your problem is probably client related and due to the fact how the
capture command may behave differently based on the client OS and the
Novell client version.
Did you swap the workstations or upgrade the Novell client at the same
time you changed the server?
In any case, we need more detailed information on how your client side
operates:
1) What client OS are you using?
2) What client version?
3) Did you change anything on the client side?
4) How are you capturing your printer ports?
Marcel Cox
Novell Support Connection SysOp
http://support.novell.com/forums/

Problems with printing after upgrading to Win 8.1 and/ or explorer 11

I just upgraded to Win 8.1 and now some things I want to print are not formatted properly. I've updated the drivers and the print doctor doesn't find anything wrong. The issue I see is when trying to print a shipping label, the label components are overlapping. On another computer it is fine and prints fine. Help?

Hi FishingGuy58,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some printing issues since you upgraded to Windows 8.1. So I can better assist you, Please respond with the Printer Model number.
How Do I Find My Model Number?
Once I have the information I can better research the issue and with any luck, come up with a resolution to this issue.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problems with printing after upgrade to 4.0

I can't use the Properties tab on my print button since upgraded to 4.0 . Worked fine before and works with IE and my printer functions fine. When I hit the Property tab I get a windows error Prop Res DLL not loaded.

That's a fault with Firefox 4.0.
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
ftp://ftp.mozilla.org/pub/firefox/releases/

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Print problem in epiphany after upgrade

I am having printing problems in epiphany after I did my upgrade. It says epiphany book marks crashed, and it is collecting information to report the bug. But then it closes everything. Some pages work fine, but others do not. Also, I can't choose to print a selection any more.
is there any way to go back to the old epiphany, or get this one working right?
Thanks

HI,
While in an Upgrade version the drawback of BDC is the screen names,
number and sequence may change in the upgraded version as compared
to the previous version.
In ECC6.0 you again have to do the recording for the required transaction
from T Code SHDB and then upload the data.
Hope it helps,
Regards
Mansi

Anyone having problems getting CD covers to print after downloading latest software?

Anyone having problems getting CD covers to print after downloading latest software?

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

Print problem in SmartForm after upgradation.

Hello experts
iam getting a problem in printout from a Z program (Execution) in which some information regarding 'Delivery No.' and 'Invoice No.' is coming from VBFA table.
Can anyone tell me the reason for not getting the printout.
I was not getting the print preview either.
This problem is coming after we have shifted from oracle 9i to 10G. Previously it is running fine.
Even we have run that smartform alone without program and it was not working
please reply.
Regards
Yogesh Sharma

Hey Yogesh,
If you are just looking for the Document number then the tables
VBRP LIPS and VBAP are sufficient.
Please paste your select query for me to get a clear picture. anyways here is the flow
Table VBRP
VBRP-AUBEL = Sale order No
VBRP-AUPOS = Line item No
VBRP-VGBEL = Delivery order No
VBRP-VGPOS = Line item No
Table LIPS
LIPS-VGBEL = Sale Order No
LIPS-VGPOS = Line item No
Hope this helps
Regards,
Ravi

Vertical offset problem when printing labels after editing with Crystal Reports

Hello,
We are still using the RDC component of Crystal reports in some of our C++ Software components. Label design is done with a very old Version 8.5 of Crystal, the Clients use the 10.5 runtime for printing.
This was running on Windows XP and Server 2003 for a Long time. Recently we changed to Server 2008 R2 (english) and Windows 7 (de) on the Clients. Again we installed CR 8.5 on the Server for Label design and a 10.5 runtime on the Clients for printing. Now something strange happened. If we just open a Report file with CR on the Server and save it (doing no changes), there is a Problem with printing on the Clients. The line spacing is now wrong. It´s about 5th the value as it should be. This only happens on the Client. The reports still print ok from the preview Windows of CR on the Server.
However, we have to Change Labels. As a Workaround, we installed CR also on one of the Windows 7 Clients. And this is working. We can save Labels unchanged and they are printed with the correct line spacing on the Clients.
Of Course, this should be solved in the future, because the Clients are placed in our production area and it´s not a good place for sitting and changing Labels.
i´v no idea what could be the reason?
Greetings, Jörg

This might be due to differences in default/specified printer (or printer driver) across the machines involved.

Can't Print After Snow Leopard Upgrade

I have a home network centered around an Apple Airport Extreme Base Station. The base station is wired to a Linksys network switch which, in turn, is wired to two computers - an Apple Dual G5 running OS X 10.4.11 and a and Mac MIni which, until yesterday was running Leopard. I have an HP Laserjet P1006 connected to the USB port of the AEBS and, until yesterday, everything worked fine. Yesterday, I ran the Snow Leopard Upgrade on my Mini and now the Mini won't print to the HP over the network. If I connect the printer directly to the MIni, it works fine; as soon as I reconnect the printer to the AEBS, the Mini will no longer print. The lights on the printer will flash but nothing comes out. I have downloaded the HP Printer driver update from Apple but this didn't help. I have reset the AEBS, to no avail. The G5 running Tiger has no problems with printing. And, my daughter just got a brand-new MacBook Pro loaded with Snow Leopard from the factory and she can print to the HP over the network without any problems.
Any ideas?

When I upgraded iMac from Leopard to Snow Leopard 10.6 it also stopped printing wirelessly to Brother MFC6490CW.
I thought I had this same issue with my Epson printer when wireless printing. Actually, in SL, wireless printing is very slow at least with an Epson. Takes about 5 minutes or so for wireless print to even start. When checking the printing status app, it will start out saying "printer ready." Then after a few minutes it will say "looking for printer." A few minutes later it will say "printing."
When I go into the next room where the printer is, the green light is "flashing" letting me know that "printing" has started.
So I guess what I am trying to say is to check the printing status app after you click "print." It's possible "Brother" is just as slow as "Epson."
Message was edited by: CMCSK

HP LaserJet 1320 requires user intervention to print after Leopard

Ever since upgrading to Leopard, almost every single time I send a print job to my HP LaserJet 1320 (over the network, it actually connected to a PowerMac G5 in my office), it triggers an error warning (orange flashing light) on the printer. Pressing the main green print button lets the job print, but this is really annoying.
I checked and Apple recently posted a note about the HP LaserJet 1200 having a very similar problem except that an error page was printed after each job. The workaround they suggest for this doesn't work with the LaserJet 1320 problem, however.
A quick Google reveals at least one other Leopard using HP LaserJet 1320 owner is seeing a similar issue. And actually, as I composed this post, I found some 1320 owners in another Apple Discussion post about HP printer issues with Leopard. They suggested using the generic PostScript driver, but then I really like to have the ability to duplex.
Nothing in the /private/var/log/cups/error_log file of note as far as I can tell.
Any ideas? Any other people out there experiencing this problem who might have a solution (other than switching to a generic postscript driver)?

Ok, I think I've figured a way to make the laserjet 1320 stop requiring "user intervention" (e.g. pressing the green button for every printjob).
Try the following:
Open "System Preferences" -> Choose "Print & Fax" -> Choose the Laserjet 1320 printer -> Press button "Options and Supplies..." -> Select Driver "tab" -> In the drop-down-menu "Fit to page" choose "Nearest Size and Scale" instead of "Prompt User".
The chosen driver should be "HP Laserjet 1320 series", because the generic postscript printerdriver dosen't have the duplex option amongst other shortcomings.
I find it odd that the lowest memory-option is 16-31mb of ram. The default configuration of 16mb is not IN that range, but maybe that is a little too nitty-gritty.
~ Jørgen

Problem in print after fullscreen

Similar Messages

Maybe you are looking for