Problem in printing while using printer OKI MICROLINE 721
Dear gurus,
i am working with printing of labels of user defined page format with pre-printed.i have assigned that format to printer.
my problem is that , while printing lablels of dimension 50 mm x 210 mm or 75 mm x 220 mm, my print out is not coming properly. the printout shifted to left or right and skip A4 page and then print next page.
we are using printer OKI MICROLINE 721.
DRIVERS tried: EPESCP9 :EPSON ESC/9-PIN
and SAPSWIN and SNI4011:SNI4011 24-PIN.
please tell me any solution to correct the print out.it is a critical issue. is it a problem of BASIS or ABAP .
regards
Banaja
hi,
check the styles.. and also the left margin right margin indent(try to use scale and use page format as inch4) if you created any. bacause i too had same problem while creating labels.
reward points if useful.
thanks,
anupama.
Edited by: deep kammula on Sep 30, 2008 3:11 PM
Edited by: deep kammula on Sep 30, 2008 3:11 PM
Similar Messages
-
Compilation problem with templates while using option -m64
Hi,
I have compilation problem with template while using option -m64.
No problem while using option -m32.
@ uname -a
SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
$ CC -V
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
Here is some C++ program
############# foo5.cpp #############
template <typename T, T N, unsigned long S = sizeof(T) * 8>
struct static_number_of_ones
static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
template <typename T, T N>
struct static_number_of_ones<T, N, 0>
static const T m_value = N;
static const unsigned long m_count = 0;
template <typename T, T N>
struct static_is_power_of_2
static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
template <unsigned long N>
struct static_number_is_power_of_2
static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
int main(int argc)
int ret = 0;
if (argc > 1)
ret += static_is_power_of_2<unsigned short, 16>::m_result;
ret += static_is_power_of_2<unsigned int, 16>::m_result;
ret += static_is_power_of_2<unsigned long, 16>::m_result;
ret += static_number_is_power_of_2<16>::m_result;
else
ret += static_is_power_of_2<unsigned short, 17>::m_result;
ret += static_is_power_of_2<unsigned int, 17>::m_result;
ret += static_is_power_of_2<unsigned long, 17>::m_result;
ret += static_number_is_power_of_2<17>::m_result;
return ret;
Compiation:
@ CC -m32 foo5.cpp
// No problem
@ CC -m64 foo5.cpp
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
"foo5.cpp", line 36: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
"foo5.cpp", line 37: Where: Specialized in non-template code.
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
"foo5.cpp", line 43: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
"foo5.cpp", line 44: Where: Specialized in non-template code.
4 Error(s) detected.
Predefined macro:
@ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
@ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
@ diff log32 log64
7c7
< #define __TIME__ "09:24:58"
#define __TIME__ "09:25:38"20c20
< #define __sparcv8plus 1
#define __sparcv9 1[snipped]
=========================
What is wrong?
Thanks,
Alex VinokurBug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
Otherwise, you can check for new patches from time to time at
[http://developers.sun.com/sunstudio/downloads/patches/]
and see whether this bug is listed as fixed. -
I am getting redirected to unknown sites whenever I open any site while using mozilla. Initially I thought that there is a problem with my device, but then I realized that this happens only when using mozilla, not with other browsers like chrome, IE, or opera.
These sites are mainly having the message 'Ad by ShopDrop'..
I am pasting below links to few sites to which I get redirected to
http://offers.bycontext<i></i>.com/scjs/tb/ctxjs/index<i></i>.php?kw2=www.espncricinfo<i></i>.com&affid=1151&subaff_id=725_724&intformat=roll&nextpage=http%3A%2F%2Fwww.espncricinfo<i></i>.com%2F&ch=421&sbrand=ShopDrop&folder=v4.19&typrd=ctx&cu=32929&country=IN&original_country=IN
http://add0n<i></i>.com/fastest-gmail.html?v=0.1.6&p=0.1.5&type=upgradehello, you have various malicious addons present. please perform all these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]] -
Problem on date while using gui_upload
Hi,
I'm not getting date properly while using GUI_UPLOAD.
I see the parameter DAT_MODE in the exporting parameters.
But I'm unable to give the exact value for that parameter.
Can anyone let me know how to upload the date exactly?
Thanks in advance.Do you really need to use this parameter? You can just coment this line and it will work properly.
Regards,
Felipe -
Problem in mapping while using Do not Use SOAP Envelope
Hi All,
This is wrt my thread 'Removing and adding SOAP Envelope'
I am currently working on SOAP-XI-Proxy Scenario.
For some un avoiadable reason, I had to use the option 'DO not use SOAP Envelope' .So the SOAP Envelope came withen the payload and in the pipeline, I can see the payload prefixed by '<?xml version="1.0" ?>' .
Now my payload looks like
<?xml version="1.0" ?> ( no more the encoding="utf-8" notation is there)
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<Complaint_Request xmlns="urn:******createserviceticket">
<CaseNo>12345</CaseNo>
<CustomerNo>12345</CustomerNo>
</Complaint_Request>
</soapenv:Body>
</soapenv:Envelope>
To accomodate the change, I also changed my request structure as
<Complaint_Request> (My new message Type)
<Envelope>
<Body>
<Complaint_Request> (My previous message Type)
<caseNo>
<CustomerNo>
But I am facing problem in mapping the values to the target structure (which is a flat structure),
as the payload doesnot start with ' ns1: ' notation any more . Even XSLT mapping is not working.
When I am pasting the payload in the Testing Mapping Editor, the Source Node are correctly
formed, but all come in RED . But as the root node , ie 'ns0' is not there, the value
from child nodes are not getting mapped to the target fields.
Regards,
SubhenduHi Joel,
SAP says, when we use the option 'DO Not Use SOAP Envelope', the payload also contains the SOAP
Envelope. So it is obvious that the payload wont start with 'ns0' notation.
So I am searching for a solution, when we use that option.
Regards,
Subhendu -
Hello,
I'm using my Macbook connected to external LCD while the screen of the Macbook is closed. So I can use the full screen resoluiton of my LCD. When not closed but connected the mirroring reduces the resolution and not useful.
But recently I recognized that when the Macbook screen is closed my fiber internet speed is down almost %50. When I test my fiber speed, when the macbook screen is open it's around 20mb/s, when the screen is closed and connected to LCD it's around 10 mb/s. I guess the wifi antenna is located at the screen I don't know. Is there any way to solve this probem? I want to use the lid closed without any sacrifice from my internet speed.
Thanks for any answers in advanceI have this same issue but what's strange is that it's only recently occurred since upgrading to FiOS's 50MB/s service. I was seeing 20MB/s WiFi speeds with my previous 25MB/s service. Frustrating!!
-
Problem in Reports While Using Netscape
Hi Guys,
I am able to run my reports successfully in the web mode
using Internet Explorer 5.0, but when i run the same application
using a Netscape Navigator, instead of opening a new window and
showing the report it prompts me to save the file (Save As
Dialog Box ) is shown. If the file is save and later opened ,
iam able to see my output perfectly. How is that IE and Netscape
Navigator is not behaving the same way. Is there any special
setting to be done.
My Environment is
Window NT 4.0 SP3
Oralce 8.0.5 Database
Forms 5.0 (Release 2.1)
Oralce Jinitiator 1.7.11.1
Reports 2.5
Regards
Veera
nullHi Thomson,
Thanks for your suggestion, It really worked out. But i also
came to know about better suggestion from oracle support. You
can still retain your HTML in registry , all you have to do is
to add HTML In the MIME type entry of Application Server. Just
put entries like HTML HTM . Delimeter here is a space. This
worked out for me.
Regards
Veera
Thomson Attasseril (guest) wrote:
: Hi Veera,
: I ran into the same problem with my application server running
on
: Sun Solaris. I changed the value of the FORMS60_REPFORMAT
: environment variable from HTML to html, and I did not get the
: 'Save As' dialog box after this fix.
: Regards,
: Thomson
: Vishnu Valda (guest) wrote:
: : Veera,
: : check the filename extension of your report html file. it
: should
: : be compatable with the file access extension of the browser(
: : netscape in your case)
: : vishnu V.
null -
Problem with locks while using iBATIS with MS Access through JDBC-ODBC brid
Hello,
I am attempting to use iBATIS to access MS Access file via JDBC-ODBC bridge.
(I am using Spring's "SqlMapClientDaoSupport," but that is probably irrelevant)
All this runs on Tomcat... First time DB gets accessed the LDB lock file is created. From there on the only way I can remove the lock file is to kill the JVM...
Any help is greatly appreciated...And why is that a problem?
-
Problem in tree while using the HTML format in the lable
Hi all,
DefaultTreeCellRenderer is not working properly if we pass the string as a html format inside the DefaultMutableTreeNode. Using the below code snipet you can cleraly identify the problem.
Kindly compile &execute the below code.All the lable's will be painted properly according to the color code that i've mentioned.
After that please uncomment al the DefaultMutableTreeNode variables corresponding to html tag representation and comment the already existing DefaultMutableTreeNode variables .
someone please clarify me the things what is happening here?
import java.awt.BorderLayout;
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.*;
public class MultiLineTreeDemo extends JFrame {
private JTree tree;
final int[] colorcode={0xFF0000,0x00FFFF,0x0000A0,0x800080};
public static void main( String[] args ) throws Exception {
SwingUtilities.invokeLater( new Runnable() {
public void run() { new MultiLineTreeDemo(); }
public MultiLineTreeDemo() {
super( "MultiLineTreeDemo" );
setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
DefaultMutableTreeNode root = new DefaultMutableTreeNode( "<html>This is<p>the root node.</html>" );
DefaultMutableTreeNode node = new DefaultMutableTreeNode( "<html>This is<p>a child node.<html>" );
DefaultMutableTreeNode leaf = new DefaultMutableTreeNode( "<html>This is<p>a leaf node.<html>" );
DefaultMutableTreeNode leaf1 = new DefaultMutableTreeNode( "<html>This is<p>a leaf1 node.<html>" );
/*DefaultMutableTreeNode root = new DefaultMutableTreeNode( " root node" );
DefaultMutableTreeNode node = new DefaultMutableTreeNode( " child node" );
DefaultMutableTreeNode leaf = new DefaultMutableTreeNode( " leaf node" );
DefaultMutableTreeNode leaf1 = new DefaultMutableTreeNode( " leaf1 node" );*/
node.add(leaf);
root.add( node );
root.add( leaf1 );
tree = new JTree( root );
tree.setCellRenderer(new DefaultTreeCellRenderer()
public Component getTreeCellRendererComponent(JTree pTree,
Object pValue, boolean pIsSelected, boolean pIsExpanded,
boolean pIsLeaf, int pRow, boolean pHasFocus)
JLabel lbl = (JLabel)super.getTreeCellRendererComponent(pTree, pValue, pIsSelected,pIsExpanded, pIsLeaf, pRow, pHasFocus);
DefaultMutableTreeNode newNode=(DefaultMutableTreeNode)pValue;
if(newNode.isRoot())
lbl.setForeground(Color.red);
else if(newNode.isLeaf())
lbl.setForeground(Color.green);
else
lbl.setForeground(Color.blue);
JPanel p = new JPanel();
p.setBackground(tree.getBackground());
Dimension d = lbl.getPreferredSize();
p.setPreferredSize(new Dimension(d.width, d.height));
p.add(lbl);
tree.setRowHeight(80);
return (p);
setLayout( new BorderLayout() );
JScrollPane scrollPane = new JScrollPane( tree );
add( scrollPane, BorderLayout.CENTER );
setSize( 200, 200 );
setVisible( true );
}Thanks in Advance.
SivabalanThen I guess the problems come with setting explicit foreground colours on the one hand and using html on the other, even when not specifying them in the html. Stick to one or the other, I suppose. I'm not a fan of using html in labels so I don't know what problems you might run into.
I've got rid of setForeground in the renderer and set the font colour in html. Then it is stable:
import java.awt.BorderLayout;
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.*;
public class MultiLineTreeDemo extends JFrame {
private JTree tree;
final int[] colorcode={0xFF0000,0x00FFFF,0x0000A0,0x800080};
public static void main( String[] args ) throws Exception {
SwingUtilities.invokeLater( new Runnable() {
public void run() { new MultiLineTreeDemo(); }
public MultiLineTreeDemo() {
super( "MultiLineTreeDemo" );
setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
DefaultMutableTreeNode root = new DefaultMutableTreeNode( "<html><font color=\"#FF0000\">This is<p>the root node.</font></html>" );
DefaultMutableTreeNode node = new DefaultMutableTreeNode( "<html><font color=\"#0000FF\">This is<p>a child node.</font><html>" );
DefaultMutableTreeNode leaf = new DefaultMutableTreeNode( "<html><font color=\"#00FF00\">This is<p>a leaf node.</font><html>" );
DefaultMutableTreeNode leaf1 = new DefaultMutableTreeNode( "<html><font color=\"#00FF00\">This is<p>a leaf1 node.</font><html>" );
DefaultMutableTreeNode root = new DefaultMutableTreeNode( " root node" );
DefaultMutableTreeNode node = new DefaultMutableTreeNode( " child node" );
DefaultMutableTreeNode leaf = new DefaultMutableTreeNode( " leaf node" );
DefaultMutableTreeNode leaf1 = new DefaultMutableTreeNode( " leaf1 node" );
node.add(leaf);
root.add( node );
root.add( leaf1 );
tree = new JTree( root );
tree.setCellRenderer(new DefaultTreeCellRenderer()
public Component getTreeCellRendererComponent(JTree pTree,
Object pValue, boolean pIsSelected, boolean pIsExpanded,
boolean pIsLeaf, int pRow, boolean pHasFocus)
JLabel lbl = (JLabel)super.getTreeCellRendererComponent(pTree, pValue, pIsSelected,pIsExpanded, pIsLeaf, pRow, pHasFocus);
DefaultMutableTreeNode newNode=(DefaultMutableTreeNode)pValue;
// if(newNode.isRoot())
// lbl.setForeground(Color.red);
// else if(newNode.isLeaf())
// lbl.setForeground(Color.green);
// else
// lbl.setForeground(Color.blue);
//JPanel p = new JPanel();
//p.setBackground(tree.getBackground());
//Dimension d = lbl.getPreferredSize();
//p.setPreferredSize(new Dimension(d.width, d.height));
//p.add(lbl);
//tree.setRowHeight(80);
//return (p);
return (lbl);
setLayout( new BorderLayout() );
JScrollPane scrollPane = new JScrollPane( tree );
add( scrollPane, BorderLayout.CENTER );
setSize( 200, 200 );
setVisible( true );
} -
Problem in navigation while using Form Alert
Hi all,
I've created a form,where i used a Alert in trigger for some text item. If users puts wrong information in text item alerts get populated.
Now i need to allow user if he clicks OK he can modify the text item without clicking a mouse into the text item.
Here am facing the problem whenever i click on OK button the cursor gets vanished and i have to manually clicks the mouse to the text item for modifications.
Please help me...Hi,
I've created a form,where i used a Alert in trigger for some text item. If users puts wrong information in text item alerts get populated.Now i need to allow user if he clicks OK he can modify the text item without clicking a mouse into the text item.
Here am facing the problem whenever i click on OK button the cursor gets vanished and i have to manually clicks the mouse to the text item for modifications.>
Forms Version?
Did you try GO_ITEM, after the Alert, to set focus on the item?
Cheers, -
Problem in Conditions while using BAPI_PO_CREATE1
Hi All
I am using BAPI_PO_CREATE1 to create purchase Order. When I am changing calculation type for condition type's system not picking the correct amount through BAPI.
For e.g. for condition type 'FRB1' (Freight Value) I have maintain the amount 10.00 in condition value for calculation type 'B' (fixed amount). But when I pass calculation type 'A' i.e. Percentage, BAPI overwrites the amount to 1.00%.
I Want to pass the amount 10.00 as it is with calculation type '%'. Kindly suggest how to do it.
Regards,
PradipHi All
I am using BAPI_PO_CREATE1 to create purchase Order. When I am changing calculation type for condition type's system not picking the correct amount through BAPI.
For e.g. for condition type 'FRB1' (Freight Value) I have maintain the amount 10.00 in condition value for calculation type 'B' (fixed amount). But when I pass calculation type 'A' i.e. Percentage, BAPI overwrites the amount to 1.00%.
I Want to pass the amount 10.00 as it is with calculation type '%'. Kindly suggest how to do it.
Regards,
Pradip -
I have recently been getting a burning sensation, as if my finger tips are rubbed raw, while using my track pad. I have been using my MacBook Pro for two years now. I am wondering if the track pads have a special coating on them to help reduce friction? If there is a friction reducing coating I think it could have worn off over the years of use. Maybe my fingers have more oils/sweat than most people, which would cause a coating to wear off faster. I stopped using it for some weeks hoping maybe my fingers were sore from something else. But that was not the case. The burning feeling to my finger tips starts within the first five minutes of using the track pad.
Please let me know if you know anything about Apple using a special coating on the track pad.
Thanks
Its a MacBook Pro 13-inch Mid 2010I have no different issue. Recently I bought MacBook Pro with retina display ang iPhone 6 plus. I have a burning sensation while using mac track pad. it becomes intense shortly using track pad and I cannot work.
The problem is same while using my iphone 6 plus. If it is an allergy to mixing of some metal with aluminium(as some of you have mentioned) it should not be a problem with iphone, but i have the same burning issue with using phone as well. -
Static while using earphones?
Hey guys,
Just bought a 3GS off craigslist that is still under warranty til late August. Before I take it back to the genius, have you guys ever had a problem with static while using earbuds? I've tried 2 pairs and get the same static. I looked for the sticker in the jack to see if it was red, but didn't notice anything unusual. Maybe some excess lint.
What does it sound like?
ThanksI'd say genius bar, but you can also use a bluetooth headset to override the plugin. It's possible the plug hole was damaged by the previous user.
-
My iphone 4s while using getting heat on side the back also
please help me how can i fix my problem iphone 4s. while using less than minute my phone getting heat on side 1st then the back. what can i do?
Hi mande2377,
If you are having issues with a greyed out or unresponsive WiFi button on your iPhone, you may find the following article helpful:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Regards,
- Brenden -
On MacBook Pro unable to print webpage; I get a single blank page. But I can print using Safari. Started last week while using Firefox 3.6. I downloaded Firefox 5.0--same problem.
I am now able to do live broadcasts with my i-sight, but my original problem still exisits....
Unsolved Problem:I need to be able to broadcast from CamTwist as CamTwist is the only program that will allow me to do what I need to do. Justin.tv and Ustream.tv do not recognize CamTwist for reasons I can not explain.
Maybe you are looking for
-
How to get Photostream from 'business' iPhone to 'family' iCloud-account
Has anyone found a solution for this yet ? There must be numerous pleople having this same problem : I have a (in my opinon rather standard) setup in which I have a private iCloud-account on my 'business devices' (iPhone, iPad, MacBook Pro) and I hav
-
No OS on drive so need to reinstall Vista OS before 7 upgrade but Vista discs do not work
With regard to the information below the recovery discs were made when the laptop was new and they won't work now. How will these discs that can be ordered differ from the ones that were made? The laptop was not a refurbished model. No offence, but f
-
Inserting Clip Art In A Pages 09 Document
How do you insert clip art in to a Pages 09 document? I am new to iWork after using Appleworks for many years. I have many CDs of Nova Art Explosion Clip Art that I want to use in my documents. I can not seem to find any information on how to insert
-
10.1.3 af:selectInputDate crashes Safari 2.0.3
When the user selects either a date value OR clicks "cancel" from the af:selectInputDate pop-up window, the Safari browser crashes. Running version 10.4.3 of OS X. The widget in the pop-up is rendered correctly, and the user is able to page through v
-
Source selection may no longer be necessary
Quote: The Apple TV continues to offer the ability to stream media or play it from the device's hard drive, but the updated interface discards the distinction between local and remote storage. Your media is your media - My Movies, for example - and t