Problem in Reporting having 2 records in Cube of same attribute

Hi All,
Here are a few thoughts about the problem
        1. We are doing a full load to the DSO
        2. Then are loading a delta to the cube
                If, an employee's attribute changes today, (e.g. for OrgUnit A to OrgUnit B), then that employee might have two records in the cube (and only 1record in the DSO)
                I can think of other possibities too-- for some employee the cube will have the latest attribute, for other employee, the cube will have old attributes.
Please suggest me how i can get read of this situation.
Thanks
Ankur Kuchhal
Mobile:- 9704154150
Edited by: Ankur Kuchhal on Sep 9, 2008 11:16 AM

hi,
while transfering the data to Cube the Keyfigure will be taken care by the change log table in DSO. But my botheration is about the attribute of the record.
Old record will have like this
ORG-A         EMP1       +10
ORG-B         EMP1       +20
Now the keyfigure value is 30. But my problem is while reporting it will show 2 records ORG-A and ORG-B for the same employee. Though my requirement is, it should show only one record like
ORG-B     EMP1     +30
in reporting.
Thanks
Anlur Kuchhal
Mobile:- 9704154150

Similar Messages

Problem in reports from accessing data through Cube

Hi, Experts
we have Product structure cube.In that product structure is one of the dimension and its has vast hierarchies under it,in which most of them are tagged as shared memebrs.The time is also one dimension,in which under it year,half year,qtr,months were present.
The problem comes due to two reasons
1)For product structure ,when i set to dynamic calc as storage property,Its not taking...and not aggregating.
2)As i am loaded data as per the months,its aggregating to total years and showing in the report.When I drill down year,Its not happening...
How to rectify the problem.....?
Edited by: user8842356 on Nov 9, 2009 1:13 AM

It is BSO..Cube.
I executed the calculation Default calc all.
The main problem coming was that years when i drill down to months ,its showing all zero values..

Number of records in Cube and in report

Hi,
Is it possible to have less number of records visible in InfoCube and in reporting report has to show all the records?i.e., if cube contains 100000 records while using InfoCube--->manage and checking the data it has to show only 90000 records,while reporting it has to show all the records.If it is possible how?

If you want all the records to be displayed on the report as in the cube create a report having all chars & keyfigures with no filters.
Sry, I dont get the 90000 part..."checking the data it has to show only 90000 records" -- checking where & how ?
<b>**Added</b> will be the num of records in the cube.

Date based report with multiple record return

Hello all,
Here is the situation. Running MAS 4.1 and using Crystal 10 for doing reports. I currently have a custom report that shows all invoices that have been paid for any given date range. This works great except when there is a "credit Memo" against an invoice. The way I'm getting all paid invoices is via a formula. The record set I have to pull against lists the invoice amount, date paid and amount paid. Simple calculation on the returned record will tell you if it has been paid off or not. The problem I'm having is those invoice records that also have a credit memo against them. The credit memo entries do not have a "paid date" and since that is my main selection criteria those records will not pull into my report, and therefor those invoices will not be showed as being paid. What I need to happen (and I don't know how to do it). Is for the report to run based upon the date range specified, and pull in related records even if there is no "paid date" on them. The way MAS stores it's invoice/credit memo records is the same for both. The main difference is that invoice has the "type" field set to "IN" and a credit memo has the "type" field set to "CM". So the actual "invoice number" is the same for both kinds of records. I hope my request makes sense, if not let me know and I will try to explain what does not make sense. Thanks in advance. Bill

Jason,
You've been very helpful, but I guess I'm just not explaining myself that well. The Credit Memo's throw things off because they do not contain a "Paid Date" value. That field in the record is blank. Since it is blank the report query ignores them. Therefore when the report query returns all records that have a "Paid date" range of "x to y" they are never returned. This is a problem whenever a credit memo exists for an invoice because the "invoice total" never changes. So when a customer pays on their account for a particular invoice, they only pay what is due which is the "invoice total" minus any "credit" from the "Credit Memo". So when my A/R person receives payment they are showing the invoice paid in full because MAS automatically includes all invoices and credit memo's. My report does not because there is no data in the "Paid Date" field of the record for Credit Memos.
I've been doing alot research in trying to resolve this "exception" to my report. I think I may be on to something, but my knowledge of arrays is extremely limited. My resolution involves populating an array with the "invoice numbers" that are returned from the initial query from the supplied date range. Then using the "invoice numbers" from the array have it then populate my details section of the report with all of "invoice records" both the actual invoice record and any "credit memo" records. I can then group the records returned based upon the "invoice number". then within that grouping I can performing my calculations to show whether or not the invoice has been paid in full. What do you think? I've been able to populate an array with the invoice numbers based upon my date search range, but I have yet to figure out how to take that information and perform another lookup to pull in the rest of the data I need. Do you have any ideas?
Thanks. Bill

Anyone have the problem I'm having with the Safari collecting cookies even when I'm not on a website? I cleaned everything out and checked several times. Each time cookies were added that I've never seen with my older version of Safari. I have the bloc

Anyone have the problem I'm having with the Safari collecting cookies even when I'm not on a website? I cleaned everything out and checked several times. Each time cookies were added that I've never seen with my older version of Safari. I have the block third parties and advertisers but I don't think it works. Here's a sample of what is popping up: 247realmedia.com, 2mdn.net addthis.com, admeld.com, adsafeprotected.com, adsonar.com, bit.ly, bluekai.com, bluelithium.com, bluetoad.com bondware.com.......... over 100 things without a clue where they are coming from. Especially since I'm not on any webpage! How do I report a bug? Is there a way to fix this?

Firefox + NoScript, BetterPrivacy, Ghostery, AdBlock Plus, Click&Clean helps.
Hidden Flash cookies are stored in "Macromedia" Folders on your computer, can delete using the free Easy Find, but need to reinstall Flash again here
http://www.macupdate.com/app/mac/11076/easyfind
http://get.adobe.com/flashplayer/
OnyX run afterwards All the cleaning and maintenance steps followed by a reboot, followed by a Disk Utility erase free space.
http://www.titanium.free.fr/
CCleaner is in beta for OS X, can combine the cleaning and secure erase in the same steps if properly configured.
http://www.piriform.com/mac/ccleaner
Ideally, to surf XXX sites, one should use a virtual machine software like the free VirtualBox and a ISO of Linux like MacBuntu,
https://www.virtualbox.org/
http://www.oslike.se/
comes with Firefox and Flash is available in the Ubuntu Software Center, create a "snapshot" of this virtual machine to revert back too after surfing. This dumps everything hidden or malware related in the guest OS, scrub the drive if you wish with Disk Utility Erase free space option.
HTML 5 has introduced a whole new range of tracking ability, you can search for the details online.
Flash cookie, everycookie, HTML cookies. Google has trackers all over the internet, they record your computer info and all your searches, ISP's record all your IP traffic and keep it for a year, cell carriers track your location via tower and signal triangulation (even non-GPS/smartphones) and keep the results for 6 months and both turn over everything to governments. In fact Uncle Sammy has NSA backrooms on the Internet backbone capturing the traffic in real time.
http://yro.slashdot.org/story/11/03/26/179257/German-Politician-Demonstrates-Ext ent-of-Cellphone-Location-Tracking
Turn off Java. Run with little or no scripts. (NoScript)
SSD drives can't be securely erased as this would wear them out prematurely, the government and police have a portable device from Cellbright they can attach to over 3000 phones and grab the data and password with.
http://hardware.slashdot.org/story/11/02/17/1911217/Confidential-Data-Not-Safe-O n-Solid-State-Disks
http://www.thenewspaper.com/news/34/3458.asp
Creepy program track you by pictures you took
http://www.thinq.co.uk/2011/3/30/creepy-app-warns-end-privacy/
Apple trying to patent new spyware
https://www.eff.org/deeplinks/2010/08/steve-jobs-watching-you-apple-seeking-pate nt-0
http://betanews.com/2011/04/20/apple-tracking-location-of-ios4-device-users-rese archers-say/
Each computer has a unique ID and a MAC addrress on file with Apple, Java gives up this information with a simple script on websites
Also look here and freak out.
http://www.whatsmyip.org/more/
You can't win, the government, advertisers, social sites, search engines and devices makers are all in cohoots to profile everyone.
Live off the grid and have your freedom or tell everyone your business and let them mold you, there is no "in between", try as you may they just come up with new stuff to watch you, through your web cam, via the hidden microphone and even can turn on some cell phones microphones too.
You may be paranoid, so is the government, and they got more money, power and resources at their disposal to act on it.
Erase the whole hard drive and reinstall, if you can't do that, trash the entire machine and go read a book.
https://discussions.apple.com/message/16276201#16276201
(ps. that was fun, enjoy the paranoia because they ARE watching you.)

Allignment problem between Report Builder And Apps

Hi All :
If i am running a report in report builder i am getting 20 records in each page of the reports.but when i am running this same report in apps i am getting 24 records in each page of the apps more than this the records allignment everything has been changed in apps even i am setting equal page setup to both apps and report builder and style and rows and columns also having commen setup. so any one can help how to get same output in both apps and report builder for each and every page(20 records and 20 records)...

Hi ,
I have check the /etc/hosts & /etc/services file.
Both are ok.
can ping hostname & ip. Can resolve hostname and ip at DNS.
port 3217 & 3317 is open.
What else that I should check?
Thanks.
ck chai

Reporting on Merged Records

I would like to know if there is a way to report on records that have been merged through Portal? It would be nice to be able to report which records have been merged over a time period (like within the last month), but if that is not possible, I am just looking for a way to report on merged records through other criteria. I heard that an iView is being developed to do this, but I can't find one for this functionality right now. I can display the Key Mapping info without a problem. But there is no way to search against this information.
Thanks,
Justin
Edited by: Justin Fountain on Apr 22, 2009 9:24 PM

I found the answer:
If you see the REP table, there is a column called REP_MAX_REP_SIZE which contains the maximum report size for each report. This value has a default value of 5000 for most of the reports. You can change this value to have a higher number so that the report returns the data. But increasing the number can reduce the response time since the number of records will be large.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Problem running reports with graphics in 11i

Hi,
I have developed some custom reports (using
Reports 6i) with graphics charts embedded within them. I would like to display the output from within Oracle Applications 11i.
There seem to be two approaches:
1. Invoke the report from Oracle Self-Service using OracleOasis.runReport
2. Register the report as a concurrent request (with HTML/PDF output) and run it using the concurrent manager
Approach 1 requires the reports server cgi which I start using adrepctl.sh. Approach 2 requires the concurrent manager which I start using adcmctl.sh.
The problems start to occur depending on how and from where I start these scripts. The exact problem occurs in both cases.
If these scripts are started:
1. From a regular telnet window from a windows NT box
The reports error out with a REP-3000 internal toolkit error
2. From an Exceed xterm session and I keep the Exceed session alive (I tried both TrueColors and PseudoColors settings)
The reports work but there are problems with the output - pie colors do not appear (everything is white, for e.g.), etc.
3. From the Sun Solaris console
The reports work fine.
The problem is that method 3 is not very convenient since every time I bring down the concurrent manager or reports cgi server, I need to walk to a different building (where the Sun boxes are) to start it.
Method 2 above isn't particularly great either (even assuming I can get it to work) since I need to have an exceed session running all the time.
Can some one offer suggestions to solve the problem I'm having? Even clues on why method 2 above is not working as expected would be greatly appreciated.
Thanks,
- NR

Problem solved! As long as the xhost + is set on the host machine and some one is logged in, it appears that one can simply set the DISPLAY environment variable to point to the host (even from a simple telnet window) and start the reports server or concurrent manager. Looks like you also have to have REPORTS60_NO_DUMMY_PRINTER set to "YES".

Problem during number assignment cause record in iw51

Hi,
I am getting this error message in my BAPI(BAPI_SERVNOT_CREATE).Kindly suggest me what am I supposed to do.
I am getting the error message while assigning the cause code "Problem during number assignment cause record "
Please have a look at my code link.
http://selectoptions.blogspot.in/2012/03/report-zbapiservnot.html#!http://selectoptions.blogspot.com/2012/03/report-zbapiservnot.html
Edited by: dhinesh on Mar 8, 2012 5:05 AM
Edited by: dhinesh on Mar 8, 2012 5:08 AM

Hi
The problem seems to be with the number range given for the document type you are using for posting the rentals. When you simulate it, no posting happens that is why the problems does not come fore. But when the tick is removed, the system is trying to post the document and at the same time, since the number range of internal type, the number you are giving (hope you might be giving some number for your document or something like that..I am not sure about your module), the system throws the error. Please check your entry.

Pass value from previous interactive report to create record form

Hi All,
I am an APEX newbie and have an APEX 3.2.1 application that is still being developed that is working reasonably well. The problem I am having is the following:
I have 3 interactive reports. These are defined on their respective tables, namely, clients, servers, and databases. By clicking on a client name, it shows the servers that are associated with that client. By then clicking on a server, it shows me the databases that are on that specific server. I am able to perform updates, deletes and inserts on all of these.
In order to say create a server, i click on the name of a client and it brings me to the Server Interactive report to see the associated servers. I then click a "Create a Server" link that brings me to the create a server page. The issue i am having is that I would like to have the previous value of the primary key (Client ID) passed from the Server interactive report to the form where i create a new server so that the client ID is already populated in the Create a Server form. Presently, the only way i am able to do this is by defining the client ID column on the Create a server form as a select list and displaying ALL the different clients. By selecting a client name, this list then returns the client id associated with that client name. This is a potential source of confusion for the users and it would be much better if the client ID was already in a text field that is disabled and all they have to do is fill out the other fields of the form.
I would greatly appreciate any help in this matter as I am fighting project deadlines. I have seen other examples that are similar, but i am still experiencing difficulty.
Thanks,
Tim

Hi,
I am still very confused as to how to get this to work.
I cannot have the value passed by clicking the client ID link from the Server Interactive Report in order to populate the Client ID field in the Add Server Form. It MUST be done by clicking an Add Server button that will pass the value as well as take me to the Add Server Form. So far, I have only been able to have the value show up if i click the client ID column on the Interactive report that has a column link defined as follows:
Name VALUE
P9_CLIENTID #CLIENTID#
However, when i do have the value passed this way i receive the following error message which proves that it is not saving the god damn state!
ORA-01400: cannot insert NULL into ("USERS"."NEW_SERVERS"."ClientID")
Error Unable to process row of table NEW_SERVERS.
Even if the value appears in the text field, it isnt really there!
How to make it know the value is there is beyond me.
I dont know what to think of this situation. I have tried all types of settings and I have a feeling it will be 2010 before this is resolved.
It is really frustrating, it has been days i am trying to get this to work...
Thanks,
Tim

Problem in reports 6i while using delimiter option.

Hi,
I am facing problem in report writer while using delimiter option.
Report summary
==============
In my report I am having two queries in data model and two different repeating frame for each in layout.
These quires are called based on the user parameter. That means if user parameter is 1 then query 1 is called and the report is kick off and same for query 2 when user parameter is 2).
Problem Encountered
=================
Both these reports are running fine while using pdf option to generate report .
While using delimiter option only one of the query is able to generate report (based on which ever is created first and rest will give 0 byte file).
I have also trapped it while using messages and it is logically flowing fine.
I think report writer does not support such scenario.
please expedite on this.
thankx
peyush

Hi,
There are no such limitations with Reports. If I understand properly, you run the Report twice, in each run, you are trying to execute different query, and you generate two dilimited Reports output files? This should work fine. Try out the latest Reports 6i patch-10 for this. You can even approach Oracle Support with your testcase. FYI, with Reports 6i patch-11, a new feature "dlimited data" is introduced which will give delimited output with a data dump i.e it would not be dependent upon the Reports layout. You can probably try out this new feature also.
Thanks,
Rohit Hi Rohit,
Thanks for the information.
well I am generating single output file on each run .
the problem is somewhat funny.
I have build query2 in data model after query1.
query 1 is giving me correct output both in .PDF and delimiter version.
But query2 is giving me 0 byte file for delimiter version although in .PDF it is running fine.
When I took out query2 to another module it is running fine for both.
I hope this make sense.
Moreover if u still not clear about the problem and thinks that u can help me out please send me ur mail id so that I can send you the RDF copy.
Thanks
Mohit...

RAXINV - Strange problem in Report Builder

I'm having a very wierd problem in Report builder 6.0.8.27.0. I'm simply trying to add two additional columns to the AR Invoice report (RAXINV) so that they get included in the XML output. This report has a main query called Q_INVOICE which is basically a dummy query to set the column aliases and at the end of the query it does a UNION with the user parameter &common_query.
So, what I have done is gone into the common_query parameter and added the two extra dummy columns before the FROM statement (I've tried adding at different places but always the same result). Once that is done I've then gone into the Q_INVOICE query and added the same two columns. When I hit the OK button to update the query is when my problems start.
There is a group in the report called G_ORDER_BY that has the field ORDER_BY in it. After clicking ok to update the query the G_ORDER_BY now has a field called BILL_CUST_NAME1, but the XML tag is still saying ORDER_BY. This happens to many fields in the report (the names are changed/corrupted) and as such the report is now useless as it won't compile.
I have no idea why this would happen and I've never seen anything like this before.
Can anyone provide any help on this ? I've logged an SR on this too but wanted to try here also incase someone had already crossed this problem.

Dave,
Not sure if its relevant or not, but I just fixed this issue, you need to change your query in three places, common_query parameter, build_query program unit and the main query itself in report editor.
Cheers,
Zeeshan

Sign problem in Report

Hi Folks,
I have a problem in reporting.
We are getting a data from flat file and loaded in to ICELIM cube and later that will pull into Managerial Consolidation Cube.
P99T is account member and its ACCTYPE is EXP and its a parent member.
We created a one report based on ICELIM cube its showing negative values for the member P99T. Created another report based on Managerial Consolidation Cube, Here the same member showing Positive values.
Can any one please let me know what is the problem is?
I need Positive values in Both reports.
Regards,
G. Saida Reddy

Hi vadim,
Thank you for you response,
Recently I take over this project, Previously one guy is handled all those things.
But if "Descendants of P99T is Applicant count=EXP(ACCTYPE), FT=EXP(ACCTYPE), Applicant Rate= EXP(ACCTYPE)" then P99T is meaningless - how can you aggregate count, FT and rate????
Can you please let me know the what is the exact point your are saying from above.
we have positive signs for base members of ICELIM and Managerial Consolidation.
Now it is not possible to change moving data from ICELIM to Managerial Consolidation.
can you please let me now the issue for sign in the report?
Regards,
G. Saida Reddy

Problem in Reporting having 2 records in Cube of same attribute

Similar Messages

Maybe you are looking for