Problem in selecting records

Hi, everyone.
I have a problem in selecting records. In this case, I want to select records from database
LFA1,and the components of this table are LIFNR,ERDAT,LOEVM ,and so on.The type of LIFNR is char(10).There is a internal table:tab_cdhdr , the elements of tab_cdhdr are: objectid,udate and change_ind.The type of objectid is char(50).
And the select-rule is that: LIFNR = objectid. So I write like this:
select   lifnr
             erdat
             loevm
form     lfa1
into       tab_lfa1
for all entries in tab_cdhdr
where   lfa1 = tab_cdhdr-objectid+0(10).
But there is a warning: When using FOR ALL ENTRIES IN the specifyed length for "OBJECTID" is ignored in this condition.
Can you help me to solve this problem?
Thanks.

Hi Feng..
If you dont want to change the Internal table TAB_CDHDR, Then declare another internal table (TEMPTAB_CDHDR.) with the same structure but Objectid with only 10 chars.
IF TAB_CDHDR[] IS NOT INITIAL.
LOOP AT TAB_CDHDR.
MOVE-CORRESPONDING TAB_CDHDR TO TEMPTAB_CDHDR.
APPEND TEMPTAB_CDHDR.
ENDLOOP.
select lifnr
erdat
loevm
form lfa1
into tab_lfa1
for all entries in tab_cdhdr
where lfa1 = TEMPtab_cdhdr-objectid.
ENDIF.
Sure ... this will work for u.....
REWARD IF HELPFUL.

Similar Messages

Performance problem with selecting records from BSEG and KONV

Hi,
I am having performance problem while selecting records from BSEG and KONV table. As these two tables have large amount of data , they are taking lot of time . Can anyone help me in improving the performance . Thanks in advance .
Regards,
Prashant

Hi,
Some steps to improve performance
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5. Avoid using nested SELECT statement SELECT within LOOPs.
6. Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7. Avoid using SELECT * and Select only the required fields from the table.
8. Avoid nested loops when working with large internal tables.
9. Use assign instead of into in LOOPs for table types with large work areas
10. When in doubt call transaction SE30 and use the examples and check your code
11. Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12. Use "CHECK" instead of IF/ENDIF whenever possible.
13. Use "CASE" instead of IF/ENDIF whenever possible.
14. Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING" creates more coding but is more effcient.

JSF - Problem in Retrieving selected record from datatable

I am new to JSF and in the process of developing a new web application using JSF.
I have problem in retrieving the selected record from a datatable. I am using h:datatable tag and h:commandlink in a column for selecting a particular row on the datatable.
I have populated the data to the datatable by binding a bean and its property.
When I retrieve also I am binding to a bean in the action attribute of the h:commandlink tag in h:column of that datatable.But when I try to bind the bindign attribute of the h:datatable tag to the datatable instance in my Bean , my JSF File gets corrupted..
How to implement this without any issue??plz help me regarding this.

HI
Try the below code
DATA lo_nd_del TYPE REF TO if_wd_context_node.
DATA lo_el_del TYPE REF TO if_wd_context_element.
DATA ls_del TYPE wd_this->Element_del.
DATA lo_nd_et_postab_1 TYPE REF TO if_wd_context_node.
DATA lo_el_et_postab_1 TYPE REF TO if_wd_context_element.
DATA ls_et_postab_1 TYPE wd_this->Element_del.
DATA lt_et_postab_1 TYPE wd_this->Elements_del.
DATA: wa_temp TYPE REF TO if_wd_context_element,
lt_temp TYPE wdr_context_element_set.
* navigate from <CONTEXT> to <ET_POSTAB_1> via lead selection
lo_nd_et_postab_1 = wd_context->path_get_node( path = `ZSHP_EXTENDED_DUE_LI.CHANGING_3.ET_POSTAB_1` ).
CALL METHOD lo_nd_et_postab_1->get_selected_elements
RECEIVING
set = lt_temp.
* navigate from <CONTEXT> to <DEL> via lead selection
lo_nd_et_postab_1 = wd_context->get_child_node( name = wd_this->wdctx_del ).
LOOP AT lt_temp INTO wa_temp.
CALL METHOD wa_temp->get_static_attributes
IMPORTING
static_attributes = ls_et_postab_1.
ls_et_postab_1-vbeln = del. // adding new attribute value.
APPEND ls_et_postab_1 TO lt_et_postab_1.
CLEAR ls_et_postab_1.
ENDLOOP.
lo_nd_et_postab_1->bind_table( new_items = lt_et_postab_1 ).

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

Problems with ECATT recording using SAPGUI Record

Hello,
I got a problem with my recording. All the prerequisites are done. The problem is, that when the recording is done i don't see the recording in SECATT testcase. Normally when you do a recording you see at the bottom right of the gui a red/white icon active. When i do a recording now, this red/white icon isn't active.
For my it's a very strange error. I hope somebody can give me a hint where i can look,
Thanks in advance.
Kind regards,
Maarten.

Maarten,
First when you start the recording using SAPGUI, you will get the pop-up whether to record this new session. You need to select Yes before continuing your recording.
Secondly check the scripting values in the target system whether it is enabled or disabled using the RZ11 transaction. Mostly SAP Basis team have authorization to change these values for us.
Here is the parameter we need to check in RZ11 - sapgui/user_scripting. It should be TRUE.
Let me know if this helps.

Select Recording Source issue on Audigy 2

I unistalled and installed the program and can't get it to work. I have the Audigy 2 ZS plat. with the software and all. Problem I have when I open up the Organizer MediaSource Player everything works but the "select recording source" button or selection doesn't work. It's kind of blanked out as if I don't have that option at all. But when I go to the mixer I can here the line inputs but I can't record from it b/c I can't select it. If anyone has this issues let me know or how to solve it. I have windows XP and also my Audio Stream recorder doesn't work either.

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

Problem with Select

Hi All,
I am Facing one problem in select query. My requirement is as follows.
User Screen will Have 4 Fileds.
Country Code, Zip Code From, Zip Code To, Delivery Area.
All are Parameter's only.
For Example ZTABLE having below Entries.
US 12345-6787 12345-6789   AKRON             AKRON/CANTON
Once User try to create new entry by Click on SAVE, Below Possiblities are there.
Case 1: US 12345-6787 12345-6789   AKRON             AKRON/CANTON ( Error Message)
Case 2: US 12345-6786 12345-6787   AKRON             AKRON/CANTON ( Error Message)
Case 3: US 12345-6789 12345-6790   AKRON             AKRON/CANTON ( Error Message)
Case 4: US 12345-6789 12345-6790   AKRON             AKRON/CANTON ( Error Message)
Case 5: US 12345-6786 12345-6787   AKRON             AKRON/CANTON ( Error Message)
Case 6: US 12345-6785 12345-6786   AKRON             AKRON/CANTON ( Record Need To Insert)
Case 7: US 12345-6785 12345-6785   AKRON             AKRON/CANTON ( Record Need To Insert)
Case 8: US 12345-6790 12345-6790   AKRON             AKRON/CANTON ( Record Need To Insert)
Case 9: US 12345-6790 12345-6791   AKRON             AKRON/CANTON ( Record Need To Insert)
Case 10: US 12345-6788 12345-6788   AKRON             AKRON/CANTON ( Error Message)(This Condition is Failing)
Case 11: US 12345-6788 12345-6789   AKRON             AKRON/CANTON ( Error Message)(This Condition is Failing)
In the above cases 10 and 11 is failing.
I am using the below select statment.
SELECT SINGLE * FROM zdt_sd_dlv_zcode   WHERE mandt = sy-mandt
                                          AND land1 = g_land1
                                          AND ( post_code_from GE g_pbox_from AND post_code_from LE g_pbox_to )
                                          OR ( post_code_to GE g_pbox_from AND post_code_to LE g_pbox_to ).
Friends can anyone give me some valuable inputs to solve this problem.
Points will reward.
Thanks in Advance,
Srinivas.

Please use Select-options instead of Parameters so that you can use complex "and" and "or" in your select statements.
for eg:if you are declaring parameters like this below.
parameters post_code1 LIKE adrc-post_code1.
change to
select-options post_code1 for adrc-post_code1 no intervals.
siddu

How to save the selected records from Table control in dialog programming

Hiiiiiiii Every1
Actually the problem is like this:-
I have to select some records from table control and then want to save the selected records in DB table.
Example
I have some rows having inforamtion bout employees...
Now what i want is that when i click on 'SAVE' button then these selected rows should be moved into DB table.
Sachin Dhingra

see below example, I have added INSERT option after DELETE option.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA cols LIKE LINE OF flights-cols.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
TABLES demo_conn.
SELECT * FROM spfli INTO TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
        ENDIF.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
        ENDLOOP.
      ENDIF.
    WHEN 'INSERT'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          itab1 = itab.
          modify itab1.
        ENDLOOP.
      ENDIF.
      if not itab1 is initial.
        INSERT dbtab FROM TABLE itab1.
      endif.
ENDCASE.
ENDMODULE.

User selected records report

Hi experts,
I have a requiement to fulfill, I have a tabular (multiple record) form where i want the user to pick the selected record using check box (property database item--> No) and only selected records will be shown on the report upon pressing a button,
e.g employees table where user want to print only the selected employees data on the report.
All ideas will be very much appreciated, (as i am trying to make a for loop for this on the button)
(unfortunately i am using form 6i).
Regards

Hi guys,
sorry for adding new comment i know problem has been resolved. But i want to add something.
Problem can also bhi solved by creating the LEXICAL PARAMETER. So, in this solution no need to create table.
for example.
DECLARE
vParameter VARCHAR2(1024);
BEGIN
GO_BLOCK('BLOCK_NAME');
FIRST_RECORD;
vParameter:='AND report_field_name IN (';
LOOP
IF CHECK_BOX = 'Y' THEN
-- If the value in number
vParameter:=vParameter||:BLOCK.RECORD_ID||','; -- or any id you are using in form
-- If the value in characters
vParameter:=vParameter||'''||:BLOCK.RECORD_ID||'''','; -- or any id you are using in form
END IF;
EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE';
END LOOP;
vParameter:=SUBSTR(vParameter,1,LENGTH(vParameter)-1)||')';
END;
and pass this variable as parameter in report and use in report's query like this
report_query
&parameter_name
Regards,
Edited by: Ammad10786 on Mar 9, 2010 12:41 PM

How to select records based on Max/Min on different columns and group by

I have a table with 5 columns(a,b,c,d,e), i need to select records based on MAX(c),Max(D) and Min(e) group by a,b. i am trying using : select max(c),max(d),min(e) from table group by a,b. this is not working. its giving me 1 6 1
a b c d e
1 1 1 2 1
1 1 1 6 4
1 1 1 6 3
when i group by a,b i am expecting the record 1 6 3
Please help me with this.. Thanks in advance....

Hi,
Welcome to the forum!
962163 wrote:
I have a table with 5 columns(a,b,c,d,e), i need to select records based on MAX(c),Max(D) and Min(e) group by a,b. i am trying using : select max(c),max(d),min(e) from table group by a,b. this is not working. its giving me 1 6 1
a b c d e
1 1 1 2 1
1 1 1 6 4
1 1 1 6 3
when i group by a,b i am expecting the record 1 6 3It looks to me like "1 6 1" is the correct answer. You're asking for the lowest value of e, and 1 is lower than 3.
Maybe you don't want MIN (e). Explain why you want 3 (that is, how you decided that 3 is the correct value for the last column) and someone will help you code it.
Edited by: Frank Kulash on Sep 28, 2012 6:17 PM
Whenever you have a problem, you should psot CREATE TABLE and INSERT statements for your sample data. That way, the people who want to help you can re-create the problem and test their ideas. It often helps to clarify the problem, too. since this is your first message, I'll do it for you:
CREATE TABLE     table_x
(       a     NUMBER
,     b     NUMBER
,     c     NUMBER
,     d     NUMBER
,     e     NUMBER
INSERT INTO table_x (a, b, c, d, e) VALUES (1, 1, 1, 2, 1);
INSERT INTO table_x (a, b, c, d, e) VALUES (1, 1, 1, 6, 4);
INSERT INTO table_x (a, b, c, d, e) VALUES (1, 1, 1, 6, 3);
COMMIT;

Adobe form displaying data of previous selected records

Dear All,
I have created a wd component consisting of 2 views.
In the first view i am displaying an ALV. When i select a record and click on the alv button, the second view
gets called which contains an Adobe Form showing the data.
The problem i am facing is that the record which gets displayed in the adobe form is the one previous selected record and not the current record which i select.
Kindly give your valuable suggestions .
Regards,
Niti

Hi ,
Adobe form is just an external media in your case , it has nothing to do with your data.
Check what data is getting passed to adobe form via debuging .
check if your getting the selected element .
You can also post your code here if possible.
Regards
Kuldeep

Selecting record from cdpos

Hi SAP team,
How to select record from CDPOS when value_old field is initial. For currency field .
Thanks & Rgds,
Santhosh Kumar.
Moderator message: please search for information and try yourself before asking.
Edited by: Thomas Zloch on Mar 9, 2011 3:52 PM

Since the problem is related to a custom IDoc, it is the process code of said IDoc where you will have to look. Depending on how the condition records are updated, this will be responsible for writing correct change documents.
If the process code uses a standard BAPI, then change documents should be written correctly. Otherwise, the code should take care of writing the correct change documents after updating the condition records.
Often it is possible to update a business object with calling a standard function module, but change documents will not always be written since that is done separately in the usual update process. For instance, you can update a delivery by using RV_DELIVERIES_UPDATE but that won't write change documents by itself at all. So take a look at the process code and investigate how the condition records are updated. Then you'll see the way the change documents are handled.

Problem with deleting record from the report.

This is my first post here, just to let you know I just started playing with Apex.
Here we go:
I have a page with report where the link to the record I have changed with ULR to the javascript:
javascript:doDelete(#RECORD_ID#)
I have created javascript in the HTML Header of the page
<script>
function doDelete(id) {
if (confirm("Are you sure you want to delete selected record?"))
$x('P3_DEL_ID').value=id;
doSubmit('DELETE');
</script>
and finally created a process for the page On Submit - After Computations and Validations.
declare
var_id number := :p3_del_id;
begin
commit;
Delete from mytable where record_id = var_id;
commit;
end;
I don't get error messages but record is not deleted.
Thanks for help in advance.
Robert

Robert,
That's the problem. With that type selected, change the value in the textbox to just: DELETE
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-)

Unable to MERGE-Err Msg "MDM Server Failed to Merge the Selected Records"

Hi Friends,
I am using a Match Strategy in the Workflow. In the START Process of the workflow I CHECK OUT the records. In the step MATCH / MERGE when I try to MERGE similar records I get the Error Message "MDM Server Failed to Merge the Selected Records".
But the same step works fine when I dont CHECK OUT (CHECK OUT = NO) the records in the START STEP. But this would not be the right way to do it, as the incoming duplicate records would be visible in the Data Manager by other users even before it is merged.
Your inputs would be greatly appreciated to tackle this problem.
Thanks.

Hi Ravi,
The workflow steps are as follows: (I am on MDM 5.5 and SP 6)
Start (Check Out)   -
> Process -
> Validate -
> Match    (Manual Merge)   -
> Approve----
> Stop    (Check In)
                                                                                The Match and Merge step is a Manual step in the Workflow.
I Check out the records when i start the Workflow and Once the entire process is complete I check in the record. What is happening is that it does not allow me to Merge the records and I get the Error message.
If i dont Check out the Incoming records and run the workflow it Merges fine. But this would not be correct as the Incoming records(whihc could be duplicates) would be visible in the system until they are merged.
Your Input woould be greatly appreciated.
Thanks in Advance.

Access Web Database - Select record and make report with all associated records

Hey everyone,
Right now I'm in the middle of trying to convert an Access client database to be web compatible and I'm running into some problems. For this question, I think I may need to explain a little bit about the database:
The database I'm making is designed to store information about music rights for different songs. The users can input information about writers, producers, organizations, properties, businesses - which is stored all in different related tables. Then, when a
user inputs a song, they choose which writers, produces, organizations, etc. are affiliated with that song.
What I'm trying to do is make a report where you can choose a writer from the list of all the writers and then produce a report with all of the songs by that writer.
I was able to do this in the Access client by making a report that, when opened would trigger (using the On Open event) a form to open where you would choose a writer from a combo box and then click a button. When the button was clicked, it would use the value
in the combo box in a query, which would find all of the songs by that writer and then open up the report which would have the writer and all of their songs on it.
Because web reports don't have many event options and web queries are very limited, I have not found a way to make this report.
Any help at all would be greatly appreciated!

Hi,
I found that you've cross post the quesion on our Answer forum, are you satisfiled the reply from there?
http://answers.microsoft.com/en-us/office/forum/office_2010-access/web-database-select-record-and-make-report-with/04ce4e25-a964-4146-9a34-f9cb26bb0496
Regards,
George Zhao
TechNet Community Support

Problem in selecting records

Similar Messages

Maybe you are looking for