Problem in Transaction Launcher

Hi friends,
I have used the cookbook example on page 30.
And it is working fine for the transaction VA01 but when i replace it with any other transaction like SE38 or BP its does not work and after calling the Transaction launcher it shows an error in the status bar of IE5.0 that
Line 47, char 5, Error : invalid Object ,Code 0, and the complete url of ITS.
Plz help me to solve this problem
Regards
Pulkit Agrawal

Hi,
You're talking about transaction code VA01 (to create sales documents), but you want to display a customer... so in fact you use tcode XD03 right? And if you're sure that this customer number exists in your backend, you could try to debug and add leading zeros to LV_PARTNER. Maybe that will help.
Regards,
Nicolas.

Similar Messages

Problems with transaction launcher

Hi all,
I need to launch a BOR object, using Transaction Launcher, from a custom button into account activities view on the CRM UI. These are the steps that I have done:
- create a new Transaction Launcher object
- associate this obiect to a Logical Link in transaction CRMC_UI_NBLINKS
- add a new button, with EH code:
op_todisporders( ).
- add a new OP into the view, with code:
CALL METHOD cl_crm_ui_descriptor_obj_srv=>create_bor_based
    EXPORTING
      iv_bor_object_type = 'BUS2032'
      iv_bor_object_key   = '440000000003'
      iv_logical_system   = 'TECCLNT500'
      iv_ui_object_type   = 'ZWRAPPED_BUS2032'
      iv_ui_object_action = 'B'
    RECEIVING
      rr_result           = lv_descriptor_object.
CREATE OBJECT lv_data_collection TYPE cl_crm_bol_bo_col.
lv_data_collection->add( lv_descriptor_object ).
lr_window ?= me->view_manager->get_window_controller( ).
lr_window->call_outbound_plug(
iv_outbound_plug = 'TODISPORDERS'
iv_data_collection = lv_data_collection ).
- add the outbound plug to the window, with code:
fire_outbound_plug(
iv_outbound_plug = 'TODISPORDERS'
iv_data_collection = iv_data_collection ).
- add the OP into the window runtime repository, and into the view component interface
- add OP mapping into CRMC_UI_NBLINKS, calling the previously created logical link
- add my component BP_BPBT into transaction CRMS_UI_TLINK (my new outbound plug does not appear, so I added it manually)
When I click on the button, the following exception appear:
CX_BSP_WD_INCORRECT_IMPLEMENT - Define NavigationalLink TODISPORDERS for source view BP_BPBT.AccountActivities
For what I know, I don't have to define any logical link....
Can you help me to solve this issue?
Points will be awarded.
Thanks, regards
Fabio

In the window's outbound plug, I called FIRE_OUTBOUND_PLUG instead of NAVIGATE. Then I got an exception, asking me to create a navigation link in BP_CONT_MAIN. I created. Now it is working.

Transaction Launcher Logical Systems and URLs

Hi,
I'm facing a problem with Transaction Launcher.
I've done all the settings specified here: http://help.sap.com/saphelp_crm60/helpdata/en/46/231befc17b5872e10000000a11466f/frameset.htm
Under section "Define Transaction Launcher Logical Systems and URLs" I've specified the values for Quality System: the ECC system is MQAS200A
By the way, when I try to access an ERP Sales Order, the transaction CRM_TL_ERP_BUS2032_DISPLAY tries to access system MSVL200A (which is the Development ECC System).
I cannot change the Logical System within the Transaction Launcher Configuration (currently it is set to ERP), since the Transaction is standard.
Does anybody know how to map the generic value ERP with the correct value MQAS200A instead of MSVL200A?
Thanks in advance,
Regards,
Andrea Ricci

Hi,
You cannot generalize the Logical system name, for the workaround you need to put the logical system for quality and transport it to quality and it should work and to check in dev you need to again change the log. sys to dev and save it but dont transport it. Similarly you can do for production system.
Regards,
Shobhit

Short Dump GETWA_NOT_ASSIGNED while calling Transaction launcher in IC_WEB

Hi Folks,
We have a problem with Transaction Launcher profile in IC web client , after support pack implementation when i launch few R/3 transaction in Web client profile getting short dump.
when i check ST22 transaction , i found these information in Dump.
!) Error in ABAP application program.
The current ABAP program "CL_CRM_IC_ABOX_ABSTRACT_URL===CP" had to be
terminated because one of the
statements could not be executed.
we came to know below method not executing properly .
CL_CRM_IC_ABOX_ABSTRACT_URL method IF_CRM_IC_ACTION_HANDLER~GET_ACTION_PROPERTY
and also for
CL_CRM_IC_ABOX_CONSTANTS => Object_type
Any could you please advice on the same ....
Regards
raju....

Hello Raju,
Please apply the note 1101443. This should help you resolve the issue.
Thanks and Regards,
Varsha

Transaction Launcher problems: Significance of IC_LTX

Hi all,
We are on CRM 5.0 and ECC 6.0.
I am facing some problems using the transaction launcher when I use the Webgui service.
I looked into the note 888931 which asks us to use the Webgui service and the below URLs for the logical system.
http://<host>:<port>/scripts/wgate/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
OR
http://<host>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
The first one does not work in our system and 2nd one returns a grid kind of blank screen although I configured the transaction launcher to pull the transaction 'BP'.
Can anyone please let me know what could be the problem? and also what is the significance/use of the Transaction/function group IC_LTX ?
Best Regards,
Nag

Hello Glenn,
Thanks for your reply.
I've tried with passing the parameters also but still that does not work.
But if I change the URL to use the CRM_CIC_RABOX it works fine. But we have some display issues with this.
So we are trying with WEBGUI service as per the note 888931.
Regards,
Nag

Transaction Launcher problem

All,
I am trying to configure transaction launcher to launch a transaction from R/3 system. (tcode XD01to create customer). I am using CRM 5.0 & R/3 4.6 C
I have already set up the link to ITS in CRMS_IC_CROSS_SYS. Here are the values:
Mapped system: R3SYSTEM
Logical System: <R/3logical system>
Client:<client of r/3 sys>
ITS: http://xxxxxx/scripts/wgate/webgui/!
I have tested the ITS path in the browser. It works perfectly
Now when I use the Transaction launch wizard to create my launch transaction, in step 3 (more Technical details).
I select Transaction Launcher type: BOR
Logical System: <R/3logical system>
Now when I try to select the BOR Type by using F4, I get a message saying that no connection to <R/3logical system>.
I am not able to proceed further due to this. I went to SM59 and tested the R3 connection and it works fine.
Anyone knows what i am missing or doing wrong?
Ani

Ok I think the mistake I was doing was giving the R/3logical system in CRMS_IC_CROSS_SYS. I changed it CRMlogical system. Now I can see the R/3 easy access Menu.
Now for part 2 of my question:
In order to display the customer master in R/3 (Tcode Xd03) what values should I change in the step 3 (more technical details) of the transaction launcher?
I want it to take me directly to the xd03 tcode and open my business partner.

Search help is not working at Transaction Launcher

Hi gurus,
I create a transaction launch that calls a ZXXX t.code from same CRM system.
T.code ZXXX is used to execute a custom report in order to create document from excel file.
Everything is ok, but search help button is not working on web ui.
Search help will open "my computer" pop up. I guess this cause problem. Is there anyone who met this problem before?
Regards
Sadi

Hi,
Is the search help button part of custom report and is it working fine in GUI ?
What popup will come when we open that search help in GUI
Regards,
Shobhit

ITS WebGUI in CRM(By transaction launcher )

Hi all,
We would like to incude transaction "S_AE2_89000019" from CRM to SAP CRM WEB Client UI.
We have done the following steps using the SAP best practices (C04-Configuration guide):
1. in transaction CRMS_IC_CROSS_SYS we have configured the CRM system with url: http://CRMnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
and ERP system with url
http://ERPnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
2. we have set TSTC to synchronous (CRM and ERP)
3. we have configured transaction launcher through wizard (tx CRMC_UI_ACTIONWZ)
4. we have created logical link for transaction and we assigned the link to work center and business role.
The problem is that when we are opening the SAP CRM web gui and click on the link that we have created, we take a blank picture with a red x "PLease wait..." and nothing else opens.My CRM Version is 7.0 EHP1.
The webgui service in the tx sicf have been a test, after login in, a blank picture with a red x "PLease wait..." is also remaining.
Can anyone help?
Thanks in advanced.

Lei Cao,
Want to check if this issue is resolved. I have the same problem where I am getting 'please wait" with red x screen when I configured transaction launcher from crm web ui.
Did you ever get this resolved? If so please share your approach ? And is this authorization related?
Rajani

IC Webclient - PCUI Transaction Launcher - CRM5.0

Hi,
I'm trying to create a PCUI transaction using the transaction launcher from the IC webclient. I have configured the 'Transaction Launcher' using the wizard for a 'Sales Order Search - '.
Application - CRMD_BUS2000115_F4
View - Default
Object Type - BUS2000115
The problem is, when i run the IC WC, and click on the link from the navigation bar, it gives me an error "Execution not possible; data flow errors" and displays a blank page within the IC WC window. If i click on the link again, it shows the page with all the grayed out fields.
Please let me know how to resolve this issue.
Thanks,
VSingh.

Hi Thirumala,
When you say 'Make sure that you locate the correct action implementation class and make changes correctly', I hope you meant the class that was created by the wizard at the time of PCUI link creation. This class implements IF_CRM_IC_ACTION_HANDLER' interface and extends CL_CRM_IC_ABOX_ABSTRACT_PCA' superclass.
I have modified IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW method as mentioned in your other thread with the following entry:
me->gv_data_flow_complete = abap_true.
but still no luck...
Please let me know if any other settings/changes required.
Appreciate your help!!
Thanks,
Vsingh..

IC WebClient transaction launcher

Hi all,
I was wondering if anyone had used the transaction launcher in the IC web client to call a PCUI application. I have done this following the cookbook and added my own custom code. It works fine except for one small problem, the PCUI app is not maximize so it gives a small usability issue.
Any help on opening the PCUI app in maximize mode would be much appreciated.
Cheers
Andrew

Hi Thirumala,
When you say 'Make sure that you locate the correct action implementation class and make changes correctly', I hope you meant the class that was created by the wizard at the time of PCUI link creation. This class implements IF_CRM_IC_ACTION_HANDLER' interface and extends CL_CRM_IC_ABOX_ABSTRACT_PCA' superclass.
I have modified IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW method as mentioned in your other thread with the following entry:
me->gv_data_flow_complete = abap_true.
but still no luck...
Please let me know if any other settings/changes required.
Appreciate your help!!
Thanks,
Vsingh..

Parameter passing (CRM to R3) for BOR based transaction launcher

Hi All,
Our requirement is to create R3 sales order through IC webclient. The details of the business partner should be shown as the defaults in the R3 sales order creation screen.
To achieve this we:
1. Created link in Navigation Profile
2. Created transaction launcher profile (using the above created navigation link) and transaction launcher type is BOR based.
3. Transaction parameters (in the handler class method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW) are set to the business partner.
When we launch the VA01 transaction through IC webclient, we are able to see the Sales order initial screen.
We are facing the following problems.
1. We could not skip the initial screen in the VA01 transaction.
2. The transaction parameters are not passed to the R3 Sales order creation transaction. While debugging, we could see that the business partner number is correctly assigned to the transaction parameter but this value is not sent to the R3 system.
Are we missing something for passing the parameters from CRM system to R3?
Please help.
Points will be awarded.
Thanks,
Chan

Hi Chan
Don't know if this question has been answered yet, but have a look at this document: [http://www.consnet.co.za/documents/R3OrderIntegration.pdf]
This document is for WinClient Integration, but you can create your IC WebClient launch transaction for the BOR Object easily enough.
There may be more elegant ways of doing the above, such as doing everything R/3 on BUS2032 and using delegation of the BOR Object, but this document is the most detailed explanation I have.
Regards
Johan
Edited by: Johan Van Zijl on Jan 15, 2008 6:25 AM - I have fixed the link to the file

Transaction launcher not working for custom business role in WEB UI

Hi Experts,
we have maintained a link for activity reports in web Ui which triggers a program Z_CRM_TIME_REPORT . we have maintained the logical links and assigned them to the custom business role. when we run the program in SE38 in GUI its working fine but we are facing the problem when we click the link in WEB UI we get a different screen related to BP and not the activity report.Kindly suggest what are the configuration need to be tested.
Thanking you,
Deepa

My guess would be that the parameter stated in the logical link (navigation bar customizing) that you use is incorrect. This should be the name of the transaction launcher definition you have maintained.
Otherwise, check the transaction launcher wizard to see that the report is maintained correctly.
Hope this helps.
Regards,
Pieter Rijlaarsdam

Transaction launcher not working for custom business role

Hi Experts,
I am facing a very weird problem where the transaction laucher define for BOR transaction is working for one business role(Z business role Customized one) but its not working for other business role (Z business role).
to emphasize further we have the code:-
case ls_attributes-object_type.
    when lc_z23 or lc_z25.
      lv_logical_link = lc_ZITISU.
    when lc_BUS2000115.
      lv_logical_link = lc_ZITERP1.
    when others.
      lv_logical_link = lc_ZITERP2.
endcase.
l_if_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
IF l_if_navigation IS BOUND .
Navigate to transaction launcher using link id
    l_if_navigation->navigate( iv_link_id = lv_logical_link ).
ENDIF.
in this the logical link is is lc_ZITISU whenever this BSP application is called from both the business roles but in one the window opens up for BOR transaction whereas when we login again using different business role the code is the same as given above. I mean the sam logical link id is used and navigated to but window is not opening for transaction launcher as it happens for the previous business role.
Request your help to resolve this issue.
Thanks,
Rajwin

Hi,
I tried by applying the PFCG role id of business role which was working to the business role id of the one for which it wasn't working and then try testing whether the transaction launcher is triggering. But the transaction launcher screen is still not opening even after doing this.
Probably there's something else too which is causing the problem. Request your inputs on this,
Thanks,
Rajwin

Transaction launcher, get error Starttransaction is not defined

Hi, I am trying to create a new link in the navigation bar that should call ITS and a customer created transaction in CRM. We have been doing it before and these links are working, but now trying to create another link in the navigation bar, I gets an error
"Starttransaction is not defined". In the Handleclass created with the transaction launcher I gave it the name ZCL_filarkiv. When I did that I got an syntax error "There is a syntax error in class zcl_filarkiv". When I goes to SE80 in order to check the class, I can see several errors, I correct them and add a call in the method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW in order to call the ITS and our customerdefined class. The code added is:
        ICWEBCLIENTBORKEYPARAMETER =
'ZARKIV'. "#EC NOTEXT
me->set_container_object(
    iv_name        = '<MAINOBJ>'
    iv_object_key = ICWEBCLIENTBORKEYPARAMETER
    iv_object_type = gv_bortype
The transaction ZARKIV is working calling it directly in CRM.
The syntax errors disappears and I can activate the class without problems. But when trying to use the link, I get the error "Starttransaction is not defined". Also other links that have been working before now gets an error "Error in the starttransaction ZCL_filarkiv.
I do not have a clue what the problem could be. Is there a step that I have missed to do? Thank you for your help, regards Lena

Found out that xpath.js wasn't uploaded correctly. Now that
it is, it works!

Transaction Launcher - TCode Authorization Issue for ERP transaction

We are trying to implement an ERP transaction in the CRM WebUI via the transaction Launcher. Everything has been set up properly and the transaction appears in the nav bar. I am running it to launch a new window. When i click on it, a new window pops up, with transaction IC_LTXE and an error saying
*"You do not have authorization to view transaction ZSD_IC".*
Everything seems to be set up properly and we can access the transaction with the same user id in ERP. He has SAP_ALL.
Does this have anything to do with IC_LTXE? Is there anything special i need to do to assign proper authorization to this user.
Thanks,
jeremy

Hello Jeremy,
We are trying to execute R/3 transaction from Transaction Launcher but we are facing problems.
In order to execute transactions from TL we have copied object TSTC to ZTSTC in both systems and use the method Execute to be used from Transaction Launcher customizing. Then we have customized T. Launcher in order to get two links, one to R3 transaction (using the object ZTSTC, method execute and XD03 as value parameter) and one to CRM transaction (using the object ZTSTC, method execute and CRMD_MKTDS as value parameter).
When we execute the TL link to CRM, transaction works properly through ITS, but executing the link to R3 transaction we receive the following popup message:u2018Logged Off Successfully. You have been logged off from SAP NetWeaver Application Server.u2019 the screen gets in blank and no further actions are executed.
In order to correct the fail we have implemented these notes, but the problem still remains.
0001224663 Launch of Front Office with Transaction Launcher fails
0001263716 Launching Front Office Process using Transaction Launcher
Based on your experience could you help us to get the right configuration to reach R/3 transaction through Transaction Launcher.
Thank you very much in advance.
Best regards.

Problem in Transaction Launcher

Similar Messages

Maybe you are looking for