Problem in Transporting the changes in Payslip after inclusion of new WT

Dear Experts,
Here we have added the new wagetypes in Payslip Through Transction code PE51 in Dev Client.And the changes were saved in a Transport request.After movement to Quality the respective changes are not shown up.Then we checked the Transport request and is showing only the respective Payslip and is not showing any config part in the TP Request.
Could you please tell me the way of inclusion of Changes in the Transport Reqest.
Please advice.
Regards,
Vikram.

Dear Sikindar,
Thanks for the reply.Already we have added the wagetypes in the Payslip of DEV Server.
What should i do now.Shall i delete the WT in the Form from DEV and save them ina new request and adding of the same Wt in the same new Transport request .
After modifications ..What should i do now(After clicking the Red Van Button)
Please addvice.
V Sai

Similar Messages

"There was a problem connecting to the server" in iTunes after migrating to new mac

I have a problem that is driving me crazy with my brand new iMac. I see many other people posting similar issues, but none of the other solutions seem to work for me.
I had a MacPro and bought a new iMac, on which I used Migration Assistant to set up. So the new iMac is virtually the same as my old machine in terms of appearance and installed applications. Both machines have Mountain Lion 10.8.2. All software on both machines has been through Software Update and is fully up to date, as are the connected devices (iPhone and iPad).
The problem is with iTunes. Every time I start iTunes (I think at the moment it checks my two connected devices) I get a pop up dialogue saying:
There was a problem connecting to the server "MacPro".
The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
This dialogue continues to pop up constantly as long as iTunes is open, interrupting my work and frustrating me no end. The old machine is of course turned off and indeed is not available -- but I can't find what on the new iMac is so desperate to connect to it.
So far I have tried completing erasing my iTunes library, deleting all the preferences, reinstalling iTunes from a fresh download of the dmg, safe rebooting several times with no peripherals connected at all, and deleteing other preferences like the Login Items, iPhone config and iPhoto. I have also cleared Recent Items from the apple menu and opened "Connect to Server" in the finder and cleared all servers from the dropdown menu.
Last night I also completely restored my iPhone from scratch to see if that would clear away the issue and I have connected both iPhone and iPad to go through any apps that have permission to write content to my computer and deleted all of them completely from the devices.
Nothing has changed at all after all that, and I have run out of ideas. Clearly there is something somewhere that has my old machine's name hard coded in it but I can't see any way to search for it. I would grep my Library folder but I think a lot of the files are binary so I'm not sure that would unearth anything. I've seen many posts saying that Apple phone support (which I would qualify for) can't help with this issue and so I have put off phoning them to simply run through all the things I've already tried.
Any advice that anyone could offer would be extremely helpful. I can't use iTunes at all like this as it disrupts everything I try to do on the new machine.
many thanks!!

Nothing at all? Can't anyone help with this issue at all? I would be grateful for any suggstions as it is driving me crazy. It happens every time I open iTunes and also every time I open Mail.

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

I have a problem with Transport the personalization of standard ess compone

I have a problem with Transport the personalization of standard ess component.
My problem is in several components, such as:
portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.area_personal_information/persinfo_es/com.sap.pct.erp.ess.13.pdata
I have personalized this page (into rol, not directly in the page), with Ctrl+Right button.
Now i transport the rol, from Development to Quality environment, but i don't see the changes in Quality.
My system is NW 7.01 SP7, Can be that the problem?
Any idea to solve this problem?

First please see note 1234273 which details how best to personalize
for all users.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ed3ce7f8593eebe10000000
a1553f7/frameset.htm
Here you can read:
"If an iView is transported to another portal all these properties are
also transported. This is needed to make sure that role-specific changes
could be transported together with the role. End user personalization
data is NOT transported in this way as end user personalization is only
local to the current portal."
Could you please ensure that personalization was done by an admin user?
I'm afraid that if it was done by an end user, personalization isn´t
transported as it's explained in the documentation provided.
Could you please confirm whether you are using exactly the same language
to access to both systems, development and quality? Maybe you are using
language en(us) in one system and en(gb) in the other one. Please take
into account that personalization is language specific.
From the web dynpro end, the WebDynpro personalization is stored
NOT in the PCD prior to 710 release. And as such it cannot be included
in a portal role transport. This feature is available with NW 7.10 SP2
or later (from webdynpro point stand). The best option is to
go with NW 7.30 as this is the first NetWeaver release with EP since
NW 7.02.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

How to transport the changes of lsmw "Read display Program" changes to prod

Hi,
i have made some changes in the SAP generated program /1CADMC/SAP_LSMW_READ_<>.
i.e., in step : Read display program
the issue is that i made changes...but the changes are stored in $tmp.
now how to move these changes to Production.
when i assign to any package it is showing an error saying
"/1CADMC/SAP_LSMW_READ_<>cannot be assign to package.move to package starting with "/1CADMC/".
Thanks.
Kumar.

HI,
LSMW cannot be transported from one client to another.
You will have to do IMPORT EXPORT.
Run transaction LSMW:-
Give the Project, Subproject and Object.
From Menu go to Extras->Export Project.
Specify the project name
By default everything in the project will be selected.
If you want to transfer only a single subobject of the whole project then first deselect everything.
Deselection can be done by clicking on the description besides then project name.
After that just select the individual object.
Then press the export button.
It will prompt you to save the lsmw in your local machine.
Save it.
Similarly Import it to the production system.
Please note that your changes in the read program will not be copied via import export.
You will again have to make it in the production system.
Changing the read program is not advisable as the changes will be lost if someone once again regenerates the progrsm.
Regards,
Ankur Parab

Problem by transporting the message mapping from PI 7.0 to PI 7.1

Hi Everyone,
by transporting the message mapping from PI 7.0 to PI 7.1 i have got the following problem.
"Source code has syntax error:
K:\usr\sap\E71\DVEBMGS00\j2ee\cluster\serve......
package udfpool does not exist
import udfpool.*;
i have used a UDF in my message mapping.
This UDF calls for a method of a java class, which is imported as a .jar file with this message mapping.
this message mapping works very well on PI 7.0,
but doesn't work any more on PI 7.1 because of the problem described above.
anyone can help me out of this problem?
thanks!
zc

hi,
but did you import the jar archive to 7.1 first?
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Problem in transporting the component Controller

Hi Friedns,
We had a problem when transporting a WD Componenrt controller. Til Quality it when ok. But when the transport reached to production we saw that from the attributes tab of the Componenrt controller the WD_ASSIST WAS MISSING . Due to which it was giving a dump. We recreated a new transport and sent it but that didnt worked to .
Can anybody advise any solution. In the dump it is saying Component ZBASE_RATE CONTAINS SYNTAX ERRORS.
THANKS
Rohit

Hi,
It might be difference of the environments in ur quality and production systems.
Check whether both systems are having the same level of webdynpro patches.
You can check with ur basis people for this clarification.
Regards,
Veerendra Nath

Package for transporting the changes of a system generated struture

Hello ABAP gurus,
Quick question. I want to change a standard system generated structure. While creating the transport, the system is not accepting the Package we generally use for regular transports. So, what type and how should a package needs be created for accepting these changes into a transport.
Thanks
Tanya

Well first things first
you should not change an SAP structure like that, even if it is somehow letting you go in the change mode, unless such an excercise is reccomended to you by SAP itself (like an OSS or something, in that case they would give you a package and you will have to register the object even if you are using snote since its a ddic object).
It will be helpfull if you can tell us what is your actual requirement, why do you wnat to change a std struct? it might induce severe inconsistencies throughout your system and in some cases voids the support warranty.

Problem in Transporting the Request

Hi Frds
i wants to transport the Module program(ZSAPMKKAA) to quality ,i have created a request number .But the screen,gui status,gui titles are not coming under that request.
Kindly any tell me how to bring all the objects in one request.
Thnaks
By
Pari

Pari,
i hope you already realease you request when you already tried for transporting request to QAT.
than when you save again all object from SE80 than you need to save all things into one Request.
either you can in se10 put cursor on request than press cntr+f11 to merge objects.
Amit.

Problem in activating the Changes through NWDI

Hi All,
I have modified the ESS standard webdynpro java application through NWDI and deployed the application and the changes are working fine.
But when I try to checkin and activate the code, I am getting the following error and the activation getting failed.
[ddgen] [Error]   Structure com.sap.xss.hr.per.it.family.model.types.Hcmt_Bsp_Pa_It_R0021 is not generated
     [ddgen] [Error]   BuiltIn Type or Simple Type expected
     [ddgen] [Info]    Catching throwable null
     [ddgen] [Info]    com.sap.dictionary.generation.ant.GenerationAntTaskError
Can anyone who faced the same issue, can help me. what are steps to be followed to remove the build error during activation.
Regards
Ponnusamy

Hi Ponnusamy
Please have a look at below thread where same issue discussed.
Re: CBS build fail: Structure xxxx is not generated
CBS build failure: Structure is not generated
ddgen Structure not generated error
try to search at http://forums.sdn.sap.com/
Hope it will helps
Regards
Arun

Problem in transporting the Customer exit variable

Hi all,
i have careated a variable to capture the current date in my report, with the processing type, Customer Exit. and, its getting populated fine in my DEV environment. basically, i have to compute the number of days, in which net due date is being compared to the current date. when i transport this to the QA environment, the values for number of days is gettting some junk value, wherein in DEV its showing the exact values. It seems i have to take cetain measures in transportation of the Customer Exit.
please advice.
Thanks in advance
Sneel

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Problems happened when I changed my Apple ID to a new log in. Aperture is no longer on the MAC.

Several months ago I change my Apple ID but not any of the hardware and products associated with it. I purchased Aperture under the old log in and have been using it regularly on my MAC. Last week my harddrive on the MAC crashed. When I went to reload all the purchases - everything under the new log in loaded back fine but everything from the old ID was no longer available. Aperture is gone...
Attempts to log in using the old log in information has failed as well as countless hours working with customer service.
I will never change my ID again - but that is not helping now.
Does anyone have any other suggestions?

Jim,
are you sure, that you bought Aperture from the App Store, and not from the Apple Store?
If you bought from the Apple Store, you will have received a serial number. Do you still have it? Then download the Aperture 3 Trial and reinstall - but do this only, if you have a serial number!
Go to the Applications folder and delete Aperture.
Download the Aperture 3.1 Trial from here: Aperture 3.1 Trial
Open the Aperture Trial disc image.
Double-click the "Aperture Trial.mpkg" file.
Follow the onscreen instructions to install Aperture.
After the installation completes, choose Software Update from the Apple () menu.
Install the Aperture 3.4 update from the list of available updates.
If you definitely bought from the AppStore and not AppleStore - what happens when you try to log into the AppStore - in what way does it fail?
Regards
Leónie

OM problem in transporting the request

Message no. 5W612
Diagnosis
The system has transported a relationship to the specified object of an object currently being activated. However, the relationship cannot be activated.
The problem is usually caused by the related object not being available in the target system.
System Response
The object is transported correctly but without the specified relationship.
Procedure
Make sure that the related object is available in the target system, or that it is included in the same transport request as the current object, before you repeat the transport.
If the related object is not required or must not be available in the target system, no further action is required on your part.
can any one tell me on this

Hi Sikinder,
You can try with OM reports like,
RHINTE00 - transfer organizational Assignment.
RHINTE10 - prepare Integration.
RHINTE20 - Create missing Objects
RHINTE30 - ransfer Org.assignment in batch input folder for infotype 0001
These reports may help you to find the relationship where you can have so many selection options.
I think defiitly these will help you.
Reward me if helps,
Vasu.

Problem in transporting the objects from Q to P

Hi,
I am trying to transport ds, is, DSO from Q to P. But it ended with errors. Below are the error messages.
Extract structure ZOXDS20119 is not active
The extract structure ZOXDS20119 of the DataSource ZDS_BILLCHANGE is invalid
ZDS_BILLCHANGE is created in BW itself using View with Generic extraction. So please update me how I can solve this problem.

hi,
Send you DS in a separate TR to P and then replicate you datasource in P.
Then send the objects in other request so that i will not fail again.

Problem in Transporting the changes in Payslip after inclusion of new WT

Similar Messages

Maybe you are looking for