Problem in uploading BDC

Hi Experts,
  Iam uploading data for the tcode f-02. My flat file is having more than 1500 line items. But it is throwing a message "Item 1000 should be created, a maximum of 999 items are allowed"
Could you please telll me the reason........
Regards,
MS

Hi,
The maximum line items is 999. Make a condition in your loop that if line item or sy-tabix = 999, post your document. In your case 2 FI documents will be created.
Hope it helps...
P.S. Please award points if it helps...

Similar Messages

  • Long text problem while uploading Inspection plan through BDC.

    Hi,
    I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
    I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
    Waiting for quick solution.
    Thanks in advance.
    Fahié

    Hi a®s,
    Thanks a lot for your kind reply.
    My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
    When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
    I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
    Waiting for quick solution.
    Thanks in advance.
    Fahié

  • MULTIPLE ITEM PROBLEM IN VL31N BDC

    hI FRIENDS ,
        I AM POSTING A BDC OF TRANSACTION VL31N ,ie FOR SCHEDULE AGREEMENT INBOUND DELIVERY.I CREATE A FUNCTIONAL MODULE OF THE SAME AND CALL IT FROM AN ASP PAGE,IN THAT THERE IS PO NUMBER 5500000986 WHICH HAS TWO ITEMES 62 AND 95 RESPECTIVLY OF SAME MATARIAL NUMBER R010230123041002 AND DIE NUMBER 2304P,NOW THE PROBLEM IS THIS BDC IS WORKING WHEN THERE IS ONLY ONE ITEM BUT GIVES AN ERROR "CANT CREAT INBOUND DELIVERY FOR PO NO ...' WNEN IT HAS MULTIPLE ITEM.WHAT SHOULD I DO ? I ALSO USED LOOP BUT IT ALSO DOSENT WORK AS IT WILL ADD ALL OPEN QTY OF PO 986 AND UPDATE AGAINST ITEM NO 95.
    CODE IS AS FOLLOWS:.........
    FUNCTION y_synie_bdcinbdly.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(CTU) LIKE  APQI-PUTACTIVE DEFAULT 'X'
    *"     VALUE(MODE) LIKE  APQI-PUTACTIVE DEFAULT 'N'
    *"     VALUE(UPDATE) LIKE  APQI-PUTACTIVE DEFAULT 'L'
    *"     VALUE(GROUP) LIKE  APQI-GROUPID OPTIONAL
    *"     VALUE(USER) LIKE  APQI-USERID OPTIONAL
    *"     VALUE(KEEP) LIKE  APQI-QERASE OPTIONAL
    *"     VALUE(HOLDDATE) LIKE  APQI-STARTDATE OPTIONAL
    *"     VALUE(NODATA) LIKE  APQI-PUTACTIVE DEFAULT '/'
    *"     VALUE(EXTNID) LIKE  MAKT-MAKTG
    *"     VALUE(VENDORNO) LIKE  LFA1-LIFNR
    *"     VALUE(PONUMBER) LIKE  EKKO-EBELN
    *"     VALUE(ITEMNUMBER) LIKE  LIPS-VGPOS
    *"     VALUE(MATERIAL) LIKE  MAKT-MAKTG
    *"     VALUE(DLYQTY) LIKE  LIPS-LFIMG
    *"     VALUE(BTCHNO) LIKE  LIPS-CHARG
    *"     VALUE(POSLR) LIKE  EKES-EBELP OPTIONAL
    *"  EXPORTING
    *"     VALUE(SUBRC) LIKE  SYST-SUBRC
    *"     VALUE(INDELYNO) LIKE  SY-MSGV2
    *"     VALUE(MSG1) LIKE  SY-MSGV1
    *"     VALUE(MSG2) LIKE  SY-MSGV2
    *"     VALUE(MSG3) LIKE  SY-MSGV3
    *"     VALUE(MSG4) LIKE  SY-MSGV4
    *"  TABLES
    *"      MESSTAB STRUCTURE  BDCMSGCOLL
    *"      ERRTAB STRUCTURE  YSYNERRMSGS
    *"      INDLYTAB STRUCTURE  YSYN_QTYTAB
    Updated by ANAND SYNISE 19.1.2007
      DATA: BEGIN OF bdctab OCCURS 0.
              INCLUDE STRUCTURE bdcdata.
      DATA: END OF bdctab.
      DATA: datenow(10) TYPE c,
            fldvar(30)  TYPE c,
            fldno       TYPE i,
            flditoc(6)  TYPE c,
            qty(13)     TYPE c.
      DATA maxposnr LIKE lips-posnr.
      DATA testposnr TYPE posnr.
      DATA itemnoint TYPE i.
      CONCATENATE sy-datum6(2) '.' sy-datum4(2) '.' sy-datum+0(4) INTO datenow.
      CLEAR bdctab.
      REFRESH bdctab.
      PERFORM open_group      USING group user keep holddate ctu.
           CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '4007'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'RV50A-VERUR_LA'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '/00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-LIFNR'.
           bdctab-fval = vendorno.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LV50C-BSTNR'.
           bdctab-fval = ponumber.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-VERUR_LA'.
           bdctab-fval = extnid.
           APPEND bdctab.
       CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '=MKAL_T'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIKP-BLDAT'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
       CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '=POPO_T'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIPS-POSNR(01)'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '0111'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'RV50A-PO_MATNR'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = 'WEIT'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-PO_MATNR'.
           bdctab-fval = material.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '=POLO_T'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIPS-POSNR(01)'.
           APPEND bdctab.
    *ADDED BY ANAND ON 22-01-2007
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval =  ITEMNUMBER .     "ITEMNUMBER = LIPS-VGPOS
           APPEND bdctab.
    ************ENDED***********************
    ADDED BY MILIND 19.01.2007
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval =  poslr .
           APPEND bdctab.
    *    ENDED * *
       CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LIPS_SELKZ(01)'.
           bdctab-fval = ''.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
       CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '/00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIPS-CHARG(01)'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
          QTY = INDLYTAB-DLYQTY.
            qty = dlyqty.
           bdctab-fnam = 'LIPSD-G_LFIMG(01)'.
           bdctab-fval = QTY.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIPS-CHARG(01)'.
    *     BDCTAB-FVAL = INDLYTAB-BTCHNO.
           bdctab-fval = btchno.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
       CLEAR bdctab.
           bdctab-program = 'SAPMV50A'.
           bdctab-dynpro = '1000'.
           bdctab-dynbegin = 'X'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_OKCODE'.
           bdctab-fval = '=SICH_T'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'LIKP-BLDAT'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_CURSOR'.
           bdctab-fval = 'LIPS-MATNR(02)'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFDAT_LA'.
           bdctab-fval = datenow.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'RV50A-LFUHR_LA'.
           bdctab-fval = '00:00'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
           CLEAR bdctab.
           bdctab-fnam = 'BDC_SUBSCR'.
           bdctab-fval = 'SAPMV50A'.
           APPEND bdctab.
      CALL TRANSACTION 'VL31N' USING bdctab MODE 'N'  MESSAGES INTO messtab.
      subrc = sy-subrc.
      PERFORM close_group USING     ctu.
      CLEAR bdctab.
      REFRESH bdctab.
      IF sy-subrc EQ 0.
        indelyno = sy-msgv2.
      ENDIF.
      LOOP AT messtab.
        MOVE: messtab-msgid TO errtab-msgid,
              messtab-msgnr TO errtab-msgnr,
              messtab-msgv1 TO errtab-msg1,
              messtab-msgv2 TO errtab-msg2,
              messtab-msgv3 TO errtab-msg3,
              messtab-msgv4 TO errtab-msg4.
        APPEND ERRtab.
      ENDLOOP.
      LOOP AT errtab.
        SELECT SINGLE text FROM t100
          INTO errtab-errmsg
          WHERE msgnr EQ errtab-msgnr AND arbgb EQ errtab-msgid
          AND sprsl EQ sy-langu.
        MODIFY errtab.
      ENDLOOP.
    ENDFUNCTION.

    Hi,
    Check this code:
    REPORT Z_CUSTOMER_UPLOAD .
                  D A T A         D E C L A R A T I O N S                *
    DATA:BEGIN OF IT_CUSTOMER OCCURS 0,
         KUNNR LIKE MV10A-KUNNR,
         VKORG LIKE MV10A-VKORG,
         VTWEG LIKE MV10A-VTWEG,
         MATNR LIKE MV10A-MATNR,
         KDMAT LIKE MV10A-KDMAT,
         MEGRU LIKE MV10A-MEGRU,
         SELKZ TYPE C value 'X',
         LPRIO LIKE MV10A-LPRIO,
         ANTLF LIKE MV10A-ANTLF,
         END OF IT_CUSTOMER.
    DATA:BEGIN OF IT_success OCCURS 0,
         KUNNR LIKE MV10A-KUNNR,
         VKORG LIKE MV10A-VKORG,
         VTWEG LIKE MV10A-VTWEG,
         MATNR LIKE MV10A-MATNR,
         KDMAT LIKE MV10A-KDMAT,
         MEGRU LIKE MV10A-MEGRU,
         SELKZ TYPE C value 'X',
         LPRIO LIKE MV10A-LPRIO,
         ANTLF LIKE MV10A-ANTLF,
         END OF IT_success.
    DATA:BEGIN OF IT_error OCCURS 0,
         KUNNR LIKE MV10A-KUNNR,
         VKORG LIKE MV10A-VKORG,
         VTWEG LIKE MV10A-VTWEG,
         MATNR LIKE MV10A-MATNR,
         KDMAT LIKE MV10A-KDMAT,
         MEGRU LIKE MV10A-MEGRU,
         SELKZ TYPE C value 'X',
         LPRIO LIKE MV10A-LPRIO,
         ANTLF LIKE MV10A-ANTLF,
         END OF IT_error.
    DATA: L_INDEX TYPE SY-TABIX.
    DATA:IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
    IT_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
    ERROR MESSAGE TABLE
    DATA:IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
    DATA : C_S TYPE C VALUE 'S',
            C_E TYPE C VALUE 'E'.
    *DATA: IT_SUCCESS LIKE IT_CUSTOMER OCCURS 0,
         IT_ERROR LIKE IT_CUSTOMER  OCCURS 0.
    DATA : V_RECTOT TYPE I,
            V_RECERR TYPE I,
            V_RECSUC TYPE I.
                  S E L E C T I O N  -  S C R E E N                      *
    SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER        : P_FILE LIKE RLGRAP-FILENAME .
    SELECTION-SCREEN : END OF BLOCK B1.
               A T  S E L E C T I O N  -  S C R E E N                    *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
    to get F4 help for p_file
      PERFORM F4_FILENAME USING P_FILE.
                S T A R T   O F   S E L E C T I O N                      *
    START-OF-SELECTION.
    Uploading data from flat file into it_tab
      PERFORM BDC_UPLOAD USING P_FILE.
      PERFORM PROCESS_DATA.
      PERFORM POPULATE_BDC.
                E N D  O F   S E L E C T I O N                           *
    *END-OF-SELECTION.
    PERFORM DISPLAY_REPORT.
    *&      Form  F4_FILENAME
          text
         -->P_P_FILE  text
    FORM F4_FILENAME USING    P_P_FILE.
    DATA:L_FILE TYPE IBIPPARMS-PATH.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME        = SYST-CPROG
      DYNPRO_NUMBER       = SYST-DYNNR
      FIELD_NAME          = ' '
    IMPORTING
       FILE_NAME           = L_FILE .
       P_P_FILE = L_FILE.
    ENDFORM.                    " F4_FILENAME
    *&      Form  BDC_UPLOAD
          text
         -->P_P_FILE  text
    FORM BDC_UPLOAD USING    P_P_FILE.
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      EXPORTING
        FILENAME                      = P_P_FILE
        I_BEGIN_COL                   = 1
        I_BEGIN_ROW                   = 1
        I_END_COL                     = 8
        I_END_ROW                     = 1000
      TABLES
        INTERN                        = IT_DATA
    EXCEPTIONS
       INCONSISTENT_PARAMETERS       = 1
       UPLOAD_OLE                    = 2
       OTHERS                        = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " BDC_UPLOAD
    *&      Form  PROCESS_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM PROCESS_DATA.
    SORT IT_DATA BY ROW COL.
      LOOP AT IT_DATA.
    CASE IT_DATA-COL.
    WHEN 1.
    IT_CUSTOMER-KUNNR   = IT_DATA-VALUE.
    WHEN 2.
    IT_CUSTOMER-VKORG   = IT_DATA-VALUE.
    WHEN 3.
    IT_CUSTOMER-VTWEG   = IT_DATA-VALUE.
    WHEN 4.
    IT_CUSTOMER-MATNR   = IT_DATA-VALUE.
    WHEN 5.
    IT_CUSTOMER-KDMAT   = IT_DATA-VALUE.
    WHEN 6.
    IT_CUSTOMER-MEGRU   = IT_DATA-VALUE.
    WHEN 7.
    IT_CUSTOMER-LPRIO   = IT_DATA-VALUE.
    WHEN 8.
    IT_CUSTOMER-ANTLF   = IT_DATA-VALUE.
    APPEND IT_CUSTOMER.
        ENDCASE.
      ENDLOOP.
    ENDFORM.                    " PROCESS_DATA
    *&      Form  POPULATE_BDC
          text
    -->  p1        text
    <--  p2        text
    FORM POPULATE_BDC.
    DATA:L_COUNTER TYPE N,
             L_STRING TYPE STRING.
    LOOP AT IT_CUSTOMER.
    AT NEW KUNNR.
    CLEAR L_COUNTER.
          L_INDEX = SY-TABIX.
          READ TABLE IT_CUSTOMER INDEX L_INDEX.
    perform bdc_dynpro      using 'SAPMV10A' '0100'.
    perform bdc_field       using 'MV10A-KUNNR'
                                  IT_CUSTOMER-KUNNR.
    perform bdc_field       using 'MV10A-VKORG'
                                  IT_CUSTOMER-VKORG.
    perform bdc_field       using 'MV10A-VTWEG'
                                  IT_CUSTOMER-VTWEG.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    ENDAT.
    L_COUNTER = L_COUNTER + 1.
        CLEAR L_STRING.
    perform bdc_dynpro      using 'SAPMV10A' '0200'.
    CONCATENATE 'MV10A-MATNR(' L_COUNTER ')' INTO L_STRING.
    perform bdc_field       using L_STRING
                            IT_CUSTOMER-MATNR.
    CONCATENATE 'MV10A-KDMAT(' L_COUNTER ')' INTO L_STRING.
    perform bdc_field       using     L_STRING
                                     IT_CUSTOMER-KDMAT.
    CONCATENATE 'MV10A-MEGRU(' L_COUNTER ')' INTO L_STRING.
    perform bdc_field       using   L_STRING
                                    IT_CUSTOMER-MEGRU.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    *-- For Page down in Call Transaction Mode
        IF L_COUNTER = 14.
          CLEAR L_COUNTER.
          PERFORM BDC_DYNPRO      USING 'SAPMV45A' '4001'.
          PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                                '=P+'.
        ENDIF.
    perform bdc_dynpro      using 'SAPMV10A' '0200'.
    CONCATENATE 'MV10A-SELKZ(' L_COUNTER ')' INTO L_STRING.
    perform bdc_field       using L_STRING
                              IT_CUSTOMER-SELKZ.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SELE'.
    perform bdc_dynpro      using 'SAPMV10A' '0300'.
    perform bdc_field       using 'MV10A-KDMAT'
                                  IT_CUSTOMER-KDMAT.
    perform bdc_field       using 'MV10A-LPRIO'
                                  IT_CUSTOMER-LPRIO.
    perform bdc_field       using 'MV10A-ANTLF'
                                  IT_CUSTOMER-ANTLF.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                        '/EBACK'.
    at end of kunnr.
    READ TABLE IT_CUSTOMER INDEX L_INDEX.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    CALL TRANSACTION 'VD51' USING IT_BDC MODE 'A' UPDATE 'S'
          MESSAGES INTO IT_MESSAGES.
          CLEAR IT_BDC.
          REFRESH IT_BDC.
    ENDAT.
      IF NOT IT_MESSAGES[] IS INITIAL.
        PERFORM FORMAT_MESSAGE.
      ENDIF.
    ENDLOOP.
    ENDFORM.                    " POPULATE_BDC
    *&      Form  bdc_dynpro
          text
         -->P_0273   text
         -->P_0274   text
    FORM bdc_dynpro USING    VALUE(P_0273)
                             VALUE(P_0274).
    IT_BDC-PROGRAM = P_0273.
    IT_BDC-DYNPRO = P_0274.
    IT_BDC-DYNBEGIN = 'X'.
      APPEND IT_BDC.
      CLEAR IT_BDC.
    ENDFORM.                    " bdc_dynpro
    *&      Form  bdc_field
          text
         -->P_0278   text
         -->P_RECORD_KUNNR_001  text
    FORM bdc_field USING    VALUE(P_0278)
                           VALUE(P_0279).
    IT_BDC-FNAM = P_0278.
      IT_BDC-FVAL = P_0279.
      APPEND IT_BDC.
      CLEAR IT_BDC.
    ENDFORM.                    " bdc_field
    *&      Form  FORMAT_MESSAGE
          text
    -->  p1        text
    <--  p2        text
    FORM FORMAT_MESSAGE.
    DATA: L_MSG(100).
      LOOP AT IT_MESSAGES.
      READ TABLE IT_CUSTOMER INDEX L_INDEX.
        CALL FUNCTION 'FORMAT_MESSAGE'
             EXPORTING
                  ID        = IT_MESSAGES-MSGID
                  LANG      = SY-LANGU
                  NO        = IT_MESSAGES-MSGNR
                  V1        = IT_MESSAGES-MSGV1
                  V2        = IT_MESSAGES-MSGV2
                  V3        = IT_MESSAGES-MSGV3
                  V4        = IT_MESSAGES-MSGV4
             IMPORTING
                  MSG       = L_MSG
             EXCEPTIONS
                  NOT_FOUND = 1
                  OTHERS    = 2.
        IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        write:/ l_msg.
      ENDLOOP.
    ENDFORM.                    " FORMAT_MESSAGE
    reward if helpful,
    keerthi

  • Problem in Uploading a File by Applet

    Hi Members,
    * I have faced problem while uploading a file from client to server by ftp protocol using APPLET(No JSP) only
    * I am getting exception while running....
    * My source code is as follows,
    import java.awt.*;
    import java.applet.*;
    import java.awt.event.*;
    import java.io.BufferedInputStream;
    import java.io.BufferedOutputStream;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.IOException;
    import java.net.MalformedURLException;
    import java.net.URL;
    import java.net.URLConnection;
    public class UploadAndDownload extends Applet implements ActionListener {
         Button upload;
         Button browse;
         TextField filename;
         File source = null;
         Label name;
         StringBuffer sb;
         BufferedInputStream bis = null;
         BufferedOutputStream bos = null;
         public void init() {
              setLayout(new FlowLayout());
              upload = new Button("Upload");
              browse = new Button("Browse");
              name = new Label("Filename");
              filename = new TextField("", 45);
              add(name);
              add(filename);
              add(upload);
              add(browse);
              upload.addActionListener(this);
              browse.addActionListener(this);
         public void actionPerformed(ActionEvent evt) {
              // Code for browsing a file
              String input_file_name = "";
              if (evt.getSource() == browse)
                   Frame parent = new Frame();
                   FileDialog fd = new FileDialog(parent, "Select a file", FileDialog.LOAD);
                   fd.setVisible(true);
                   input_file_name = fd.getFile();
                   filename.setText(input_file_name);
                   // Gets the file from the file dialog and assign it to the source
                   source = new File(input_file_name);
                   repaint();
              // Code for Uploading a file to the server
              if (evt.getSource() == upload) {
                   // Appending the server pathname in string buffer
                   sb = new StringBuffer("ftp://");
                   sb.append("2847");
                   sb.append(':');
                   sb.append("Websphere25");
                   sb.append("@");
                   sb.append("172.16.1.111");
                   sb.append('/');
                   sb.append(input_file_name);
                   sb.append(";type=i");
                   try {
                        URL url = new URL(sb.toString());
                        URLConnection urlc = url.openConnection();
                        bos = new BufferedOutputStream(urlc.getOutputStream());
                        bis = new BufferedInputStream(new FileInputStream(source));
                        int i;
                        // Read from the inputstream and write it to the outputstream
                        while ((i = bis.read()) != -1) {
                             bos.write(i);
                   } catch (MalformedURLException e) {
                        e.printStackTrace();
                   } catch (IOException e) {
                        e.printStackTrace();
                   } finally {
                        if (bis != null)
                             try {
                                  bis.close();
                             } catch (IOException ioe) {
                                  ioe.printStackTrace();
                        if (bos != null)
                             try {
                                  bos.close();
                             } catch (IOException ioe) {
                                  ioe.printStackTrace();
    MY EXCEPTION IS,
    Exception in thread "AWT-EventQueue-2" java.security.AccessControlException: access denied (java.net.SocketPermission 172.16.1.111:80 connect,resolve)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkConnect(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient.<init>(Unknown Source)
         at sun.net.www.http.HttpClient.New(Unknown Source)
         at sun.net.www.http.HttpClient.New(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
         at sun.net.www.protocol.ftp.FtpURLConnection.connect(Unknown Source)
         at sun.net.www.protocol.ftp.FtpURLConnection.getOutputStream(Unknown Source)
         at UploadAndDownload.actionPerformed(UploadAndDownload.java:68)
         at java.awt.Button.processActionEvent(Unknown Source)
         at java.awt.Button.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)* Please let me know what problem in my code....
    * Thanks in advance....

    * Thanks for your reply....
    * I have signed my policy file by giving AllPermission and mentioned in java.security file in bin folder....
    * My question is , by giving AllPermission , can we access and do all permissions like ( SecurityPermission, AWTPermission, SocketPermission, NetPermission, FilePermission, SecurityPermission etc )...
    * My policy file is looks like follow,
    /* AUTOMATICALLY GENERATED ON Tue Apr 16 17:20:59 EDT 2002*/
    /* DO NOT EDIT */
    grant {
      permission java.security.AllPermission;
    };* If i signed the policy like above, and when i run the applet file in InternetExplorer now , it thorws the following exception on my console,
    java.net.ProtocolException: cannot write to a URLConnection if doOutput=false - call setDoOutput(true)
         at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
         at sun.net.www.protocol.ftp.FtpURLConnection.getOutputStream(Unknown Source)
         at UploadAndDownload.actionPerformed(UploadAndDownload.java:68)
         at java.awt.Button.processActionEvent(Unknown Source)
         at java.awt.Button.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)* Please let me know , how to solve this and give me your suggestion on the above process...
    * Thanks in advance...
    Regards,
    JavaImran

  • Problem with uploading a file in Clustered Environment

    Hi,
    I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
    Is there any solution to upload the file to all the nodes in the cluster.
    Thanks
    Kiran

    Hi,
    This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes.  However, there are some ways to get around this
    1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
    2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
    3. Store the files on a shared disk directly from the portal component.
    Cheers
    Dagfinn

  • Problems in uploading from excel sheet to internal table

    hi experts,
    i got one problem regarding uploading data from excel sheet to int.table. I used FM ALSM_EXCEL_TO_INTERNAL_TABLE but in that the value is char of 50. but i need a case where i have to send value more than 50 characters. please suggest me any other FM to overcome this problem.
    advanced thanks
    vijay

    Hi,
    >
    Vijay Krishna Arvapalli wrote:
    > hi tarun,
    >
    > thank you for your reply
    >
    > but when i tried to use FM TEXT_CONVERT_XLS_TO_SAP it is giving error actually that 'Error generating the test frame'.
    >
    > so can you suggest me with some other option where i can upload the field with more than 50 character length.
    >
    > thank you
    > regards
    > vijay
    Yes, when you execute the FM from SE37, then it displays a message.
    Just copy the below code and paste it in a report (SE38) and execute.
    Create a file in C:/ with name test.xls and execute it will display the records even with more than 50 characters of length.
    I have tested and its working.
    I have taken three fields in the excel file empid, name and doj.
    TYPE-POOLS : truxs.
    PARAMETERS : p_file TYPE rlgrap-filename DEFAULT 'C:\TEST.XLS'.
    DATA : BEGIN OF itab OCCURS 0,
             empid(150) TYPE c,
             name(150) TYPE c,
             doj(150) TYPE c,
           END OF itab.
    DATA: it_raw TYPE truxs_t_text_data.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      PERFORM f4_file_process USING p_file.
    AT SELECTION-SCREEN.
      PERFORM validate_file_path USING p_file.
    START-OF-SELECTION.
      PERFORM upload_data.
    END-OF-SELECTION.
      PERFORM display_data.
    *&      Form  F4_FILE_PROCESS
    *       text
    *      -->P_FILE_PATH  text
    FORM f4_file_process USING p_file.
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
          field_name    = 'P_FILE'
        IMPORTING
          file_name     = p_file.
      IF sy-subrc NE 0.
        MESSAGE e000(zsd).
      ENDIF.
    ENDFORM.                    " F4_FILE_PROCESS
    *&      Form  VALIDATE_FILE_PATH
    *       text
    *      -->P_FILE  text
    FORM validate_file_path USING p_file.
      DATA : lv_dir TYPE string,
             lv_file TYPE string,
             lv_result(1) TYPE c.
      DATA : lv_filename TYPE string.
      lv_filename = p_file.
      CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH'
        EXPORTING
          full_name     = p_file
        IMPORTING
          stripped_name = lv_file
          file_path     = lv_dir
        EXCEPTIONS
          x_error       = 1
          OTHERS        = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL METHOD cl_gui_frontend_services=>directory_exist
        EXPORTING
          directory            = lv_dir
        RECEIVING
          result               = lv_result
        EXCEPTIONS
          cntl_error           = 1
          error_no_gui         = 2
          wrong_parameter      = 3
          not_supported_by_gui = 4
          OTHERS               = 5.
      IF lv_result IS INITIAL.
        MESSAGE 'Invalid Directory' TYPE 'E'.
      ENDIF.
      CLEAR lv_result.
      CALL METHOD cl_gui_frontend_services=>file_exist
        EXPORTING
          file                 = lv_filename
        RECEIVING
          result               = lv_result
        EXCEPTIONS
          cntl_error           = 1
          error_no_gui         = 2
          wrong_parameter      = 3
          not_supported_by_gui = 4
          OTHERS               = 5.
      IF lv_result IS INITIAL.
        MESSAGE 'Invalid File' TYPE 'E'.
      ENDIF.
    ENDFORM.                    " VALIDATE_FILE_PATH
    *&      Form  UPLOAD_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM upload_data .
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_field_seperator    = 'X'
          i_line_header        = 'X'
          i_tab_raw_data       = it_raw
          i_filename           = p_file
        TABLES
          i_tab_converted_data = itab[]
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " UPLOAD_DATA
    *&      Form  DISPLAY_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM display_data .
      LOOP AT itab.
        WRITE : / itab-empid, itab-name, itab-doj.
      ENDLOOP.
    ENDFORM.                    " DISPLAY_DATA
    Hope this helps you.
    Regards,
    Tarun

  • How to avoid the split problem when uploading the data from csv file

    Dear Friends,
                  I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
    i am using the code as below , please suggest me what i have to do in this regard
          SPLIT wa_raw_csv  AT ',' INTO
                    wa_empdata_csv-status
                     wa_empdata_csv-userid
                     wa_empdata_csv-username
                     wa_empdata_csv-Title
                     wa_empdata_csv-department.
    APPEND wa_empdata_csv TO  itab.
    in the flat file i can see for one of the record for the field Title  as
    Director, Finance - NAR............there by through my code the  wa_empdata_csv-Title is getting splited data as "Director, and  Department field is getting Finance - NAR" , i can see that even though  " Director, Finance - NAR"  is one word it is getting split .
    .......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
    "Director,Finance - NAR"   wil not be split into two words.
    Thanks & Records
    Madhuri

    Hi Madhuri,
    Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
    If you are generating the file, use tab instead of comma.
    If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
    Regards,
    Mohaiyuddin

  • Scheduling Problem for uploading Data from Flat file to SAP

    Hi guys,
    I am facing a weared problem in uploading some leave records in z table. The code is working fine if we run it through se38 after selecting the file from a shared location from production server which has all the access rights.
    This folder lies in the \usr folder of SAP Production.
    I have kept all the Flat files in the shared path "
    Tis-mum-iz-s1\migration\SAP-INT\leave\" ...
    To give u exact directory structure..
    Tis-mum-iz-s1 is the Server Name
    usr is the SAP System folder used for uploads and downloads
    usr |
    ...-> Migration |
                      -> SAP-INT |
                                 -> leave -> (Flat Files)
    Migration folder is shared with all rights.
    Obviously, we cannot give shared drive as the variant in the scheduler.
    So i use the system path i.e. \usr\sap\tmp\migration\sap-int\leave\ as the variant.
    All my other download programs are working fine with this path as a variant...
    But my this particular upload program does not work with this path....
    I am giving u my code...
    TATA INTERACTIVE SYSTEMS (A Division of TATA INDUSTRIES LIMITED)
    REPORT      :  ZMIGRATE_ZLEAVE
    DESCRIPTION :  To Upload the Leave data. (ZLEAVE)
    CREATED BY  :  Abhishek Bachhawat
    CREATED ON  :  01.09.2005
    CONSULTANT  :  ANAND
    REPORT  ZMIGRATE_ZLEAVE.
    TABLES: ZLEAVE.
    data: begin of wtab,
              MANDT(3),
              ZLVID(8),
              PERNR(8),
              ZSTDT(8),
              ZENDT(8),
              ZDAYS(4),
              AEDAT(8),
              ERDAT(8),
          end of wtab,
          itab like WTAB occurs 0 WITH HEADER LINE.
    data: temp like zleave occurs 0 WITH HEADER LINE.
    SELECTION-SCREEN BEGIN OF BLOCK file
                   WITH FRAME TITLE text-005.
    parameters: file like rlgrap-filename Obligatory.
    Concatenate File SY-DATUM '_Leave.txt' into File.
    SELECTION-SCREEN END OF BLOCK file.
    at SELECTION-SCREEN ON VALUE-REQUEST FOR file .
      CALL FUNCTION 'WS_FILENAME_GET'
        IMPORTING
          FILENAME = file.
      IF SY-SUBRC <> 0.
      ENDIF.
    start-of-selection.
      if file ne space.
        CALL FUNCTION 'WS_UPLOAD'
          EXPORTING
            FILENAME = FILE
            FILETYPE = 'DAT'
          TABLES
            DATA_TAB = ITAB.
      else.
        message e000(zps) with 'Specify a file'.
      endif.
      SORT ITAB BY ZLVID.
      LOOP AT ITAB.
        REFRESH TEMP.
        CLEAR TEMP.
        TEMP-MANDT = sy-mandt.
        TEMP-ERDAT = SY-DATUM.
        TEMP-ZLVID = ITAB-ZLVID.
        TEMP-PERNR = ITAB-PERNR.
        TEMP-ZSTDT = ITAB-ZSTDT.
        TEMP-ZENDT = ITAB-ZENDT.
        TEMP-ZDAYS = ITAB-ZDAYS.
        TEMP-AEDAT = ITAB-AEDAT.
        TEMP-ERDAT = ITAB-ERDAT.
        APPEND TEMP.
        SELECT SINGLE *
               FROM   ZLEAVE
               WHERE  ZLVID = TEMP-ZLVID
               AND    PERNR = TEMP-PERNR.
        IF SY-SUBRC = 0.
          UPDATE ZLEAVE SET ZSTDT = TEMP-ZSTDT
                            ZENDT = TEMP-ZENDT
                            ZDAYS = TEMP-ZDAYS
                            AEDAT = TEMP-AEDAT
                            ERDAT = TEMP-ERDAT
                 WHERE ZLVID = TEMP-ZLVID
                 AND   PERNR = TEMP-PERNR.
        ELSE.
          INSERT ZLEAVE FROM TABLE TEMP.
          COMMIT WORK.
        ENDIF.
      ENDLOOP.

    Hi,
    open dataset file for input in text mode.
    check sy-subrc = 0.
    while sy-subrc = 0.
      read dataset file into wa.
      if sy-subrc = 0.
      append wa to itab.
      else.
        exit.
      endif.
    endwhile.
    close dataset file.
    regards
    Siggi
    PS: check also the F1-help for open, read and close statements!

  • Problem of uploading data in Data Warehouse

    I am using Oracle9i Warehouse Builder on Windows 2000 and i just started working in it. I am facing problem in uploading data from source schema to Target schema
         I) Created Source Moulde -- Link to One schema from where i have get data
         2) Created Warehouse Target Module -- I have created dimesnions , facts , Mapping and i deployed dimensions , fact and mapping. As a result of it i got dimension table , dimension , fact table , facts ,mapping package and TCL script for mapping. I deployed all of them and register TCL script with OEM .
         But my job created in OEM is not running. If run then does not upload any data and If I try to run job from the backend manually then it gives me message that No active job exist..
    Thanks in advance
    Surinder

    I was getting the same error. I don't know if a step failed somewhere in the install or if I missed performing a manual step but I just fired up TOAD and manually inserted a record into the WB_RT_JOB table. I set the RTJ_JOBNAME = DEFAULT_JOB and RTJ_STATUS = BEGIN. The rest of the columns I just entered best guesses. I commited and then my job would run. I guess it just needs a seed record.
    Lewis

  • Problem in uploading data to psa.

    Hi experts,
    im having problems in uploading data to psa using info package in HR info area.
    while monitoring the info package the following error comes with red traffic signal..
    Request still running
    Diagnosis
    No errors found. The current process has probably not finished yet.
    System Response
    The ALE inbox of BI is identical to the ALE outbox of the source system
    or
    the maximum wait time for this request has not yet been exceeded
    or
    the background job has not yet finished in the source system.
    Current status
    No Idocs arrived from the source system.
    So , please help me in this regard...
    waiting for your reply...

    Hi,
    You may need to check for pending TRFCs/IDOCs in source system in Tcode SM58 and BD87 and process them manually.
    ProcessI DOCS Manually 
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/content.htm
    &messageID=2311994
    Thanks,
    JituK

  • Problem in Uploading sales order text data using LSMW

    Hi All,
    I am facing Problem in uploading open sales order data from legacy to SAP using LSMW.
    We are trying to upload sales order data using LSMW Standard Batch/Direct input using program name RVINVB10 and program type D. We are not able to upload item text but have no problem in uploading remaining data.
    the details we are passing to BTEXHKOM structure are......
    BTEXHKOM-OLDNR = IHEADER-OLDORD_NO.
    BTEXHKOM-LAISO = 'EN'.
    BTEXHKOM-TDID = 'Z009'.
    and the for structure BTEXLKOM
    BTEXLKOM-OLDNR = IHEADER-OLDORD_NO.
    BTEXLKOM-TXPARGRAPH = '/'.
    CONCATENATE LITEM-DEPTID LITEM-DEPTNAME
    INTO BTEXLKOM-TXLINE SEPARATED BY ' '.
    we have three input source structures.
    IHEADER Header structure
    LITEM Line item structure ( Material data )
    IPARTN Partners structure
    The structure relationships are
    BTEXHKOM <<< IHEADER.
    BTEXLKOM <<< IHEADER.
    Please let me know if I am doing some thing wrong or some thing else need to be done.
    Thanks,
    Chindam.

    you can pass below values also
    OLDNR         :  order number and item nuber
    TXPARGRAPH  : VBBK
    TXLINE        : your text.....

  • Problem when uploading a large file in PI - weird SQL I/O errors

    Hi guys,
    I'm facing a very difficult problem when uploading a 35 MB with an FTPs adapter. I see in the logs that, after the translation to XML, it's going to 170 MB.
    I receive the following error in the CC Monitoring:
    Error: com.sap.aii.af.ra.ms.api.DeliveryException: Problem inserting 41827ca7-6b8c-4a87-198d-ad8a81fcb12b(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
    When I look in the NWA Monitoring, I see the following details:
    SQL error occurred on connection affhb201:X11:SAPSR3DB: code=17,002, state="null", message="Io exception: Socket closed";
    SQL statement is "INSERT INTO "XI_AF_MSG" ("MSG_ID","DIRECTION","MSG_BYTES","TIMES_FAILED","SENT_RECV_TIME","STATUS","CONN_NAME","MSG_TYPE","REF_TO_MSG_ID","ADDRESS","TRANSPORT","CREDENTIAL","TRAN_HEADER","MSG_PROFILE","CONVERSATION_ID","SCHEDULE_TIME","PERSIST_UNTIL","FROM_P........
    I cannot check the Visual Admin Logs 'cause I don't have access to them yet.
    I'm pretty convinced that some swap memory, message size or whatever setting on the adapter engine or on the Java stack is preventing this. I do not get any message in CC Monitoring when uploading a smaller, 6 MB version of the same file.
    Can you please help me solve this or give me some interesting pointers?
    Never before did we experience something like this in the PI system. In addition, I didn't find any useful resource on the SDN and throughout the SAP notes for this.
    Let me know if you need more info about this.
    Best regards,
    George

    Hi George
    I am facing the same issue, where did you configure the message split in the Communication Channel?
    If I do the message split as you said, is it going to create several files or how does it work?
    Thanks in advanced
    Emmanuel

  • GUI_UPLOAD - Problem in uploading xml file

    Hi,
    I have problem in uploading xml file into itab.
    Here is the code
    begin of GS_STRING,
            STR(72) type C,
          end of GS_STRING,
          GT_STRING like standard table of GS_STRING,
    call function 'GUI_UPLOAD'
          EXPORTING
            FILENAME                = FILE_NAME
            FILETYPE                = 'ASC'
          TABLES
            DATA_TAB                = GT_STRING
          EXCEPTIONS
            FILE_OPEN_ERROR         = 1
            FILE_READ_ERROR         = 2
            NO_BATCH                = 3
            GUI_REFUSE_FILETRANSFER = 4
            INVALID_TYPE            = 5
            NO_AUTHORITY            = 6
            UNKNOWN_ERROR           = 7
            BAD_DATA_FORMAT         = 8
            HEADER_NOT_ALLOWED      = 9
            SEPARATOR_NOT_ALLOWED   = 10
            HEADER_TOO_LONG         = 11
            UNKNOWN_DP_ERROR        = 12
            ACCESS_DENIED           = 13
            DP_OUT_OF_MEMORY        = 14
            DISK_FULL               = 15
            DP_TIMEOUT              = 16
            others                  = 17.
        if SY-SUBRC <> 0.
          message I499(SY) with 'File upload failed'.
          stop.
        endif.
      endif.
    In debuggin mode, i can see the itab uploaded with xml payload. But in that same place, the hexadecimal format has double zeros 00 after each character.
    XML message : <?xml
    Correct Hexadecimal : 3C3F786D6C
    Hexadecimal in itab  : 3C003F0078006D006C00
    This makes the resultant xml invalid.
    can anyone help me to solve this?
    Thanks,
    Uma
    Edited by: Uma Maheswari on May 30, 2008 4:15 PM

    what do you want to do with the uploaded XML?
    i use the following
    constants: line_size type i value 255.
    data: begin of xml_tab occurs 0,
               raw(line_size) type x,
            end   of xml_tab,
            file  type string,
            size  type i.
    call function 'GUI_UPLOAD'
        exporting
          filename            = filename
          filetype            = 'BIN'
          has_field_separator = ' '
          header_length       = 0
        importing
          filelength          = size
        tables
          data_tab            = xml_tab
        exceptions
          others              = 1.

  • Problem while doing bdc for fv60

    Hi frends,
       I got problem while doing BDC for fv60 tcode.i have given
    header items:
    vendor number
    invoice date
    posting date
    amount
    item data:
    g/l acc no: 100000
    amount 1000 whatever
    these are all given in recording
    in recording after all giving this data if we click on park it is telling "parking not possibe duiring batch input".
    can any body tell me the process for recording shdb and after that in bdc how can we give multiple line items for fv60
    thanks,
    naveen.

    I don't think you can use FV60 in batch input. Your options are to use transaction FBV1 or bapi BAPI_INCOMINGINVOICE_PARK.
    Rob

  • I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

    I have problems with uploading images to my internet printing company when  the images have been manipulated through CS6 and  i have saved images as jpeg  the printer company tell me they are not j peg,
    but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

    Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
    There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
    Take your pick.

Maybe you are looking for

  • Why cant i drag and drop on my macbook pro

    all of a sudden i cannot drag and drop files...does anyone know how i can fix this issue? thanks in advance

  • Set focus on cell in ATS Table

    Hi Friends, I try to set the focus on a field in a if_fpm_guibb_list. I use Methode request_focus_on_cell in if_fpm_list_ats_ext_ctrl. And I set lead Index to new line and set selected_line _changes to 'X'. When I look in the table what contain the n

  • Losing Custom White Balance

    I wasn't sure where to post this, so I'm starting here. I've been having an issue with RAW (actually Nikon .NEF) files containing custom white balances and software on my Mac. I shoot Infrared images with the white balance set to make the green folia

  • Error Designer 10g with DB10g XE

    Hi!!! I have installed Oracle Developer Suite 10g and DataBase 10g XE in the same machine. I have created repository (accord instructions of the manual), but when i try make a relationship give me the following error: Message RME-00020: Internal API

  • Where to download the latest eSSO (Enterprise Single Sign-on Suite)

    Hello all, Can someone please point me in the right direction in order to download the installer for the eSSO Suite software. I've been on the following pages and downloaded most of whats available there but can't seem to find the eSSO only the Open