Problem in uploading data from program to table

Hi,
I am working on a report in which i have to update the data base table and it is further used in displaying the data . The problem lies when i am uploading the data for the year 2008(fiscal year) .
In the PRD Server the 50 entries are uploaded but when i try to upload 51st it does not allow me to that and when i check the program it consist of the no such constraint that it should allow upload 50entries only (manually).
I am updating the table for those entries which are displaying the wrong as they were not updated properly.

Hi,
Adjust the table using Transaction code : SE14 and try to upload. Check the duplication value also in table.
Regards,
Saran

Similar Messages

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

Problem with upload data from CRM to BI system

When I try to perform full upload data from CRM to BI system with data source 0BPARTNER_ATTR (active version: Excutable). I waited for a long time but there are not any records were transfered (total records need to upload are 130) . I checked the log and can't find any errors.
Pls help me solve this problem.
Thanks and regard

Hi,
on the next day, the process finished with status not success.
The detail errors is:
Extraction(messages): Missing messages
          Missing message: Request received
          Missing message: Number of sent records
          Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
          Data package 1: arrived in BW; Processing: Selected number does not agree with transferred n
          Request IDoc: Application document posted
          Info IDoc 2: sent, not arrived; Data passed to port OK
          Info IDoc 1: sent, not arrived; Data passed to port OK
          Info IDoc 3: sent, not arrived; Data passed to port OK
          Info IDoc 4: sent, not arrived; Data passed to port OK
However, the data has been uploaded to infoobject. Pls explain to me about this error and why the data can be uploaded with this error.
Regard

PROBLEM IN EXPORTING DATA FROM A RELATIONAL TABLE TO ANOTHER RELATIONAL TAB

Hi,
While trying to export data from a source table to a target table, problem occurs with loading the data in the work table(SrcSet0)[As shown in the operator]. The Work Table has been dropped and created successfully, the problem is coming with loading the data( in this work table(SrcSet0)). The error details as mentioned below. Please advise:-
ODI-1227: Task SrcSet0 (Loading) fails on the source ORACLE connection ORACLE_SOURCE.
Caused By: java.sql.SQLException: SQL string is not Query
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1442)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3806)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1667)
     at oracle.odi.query.JDBCTemplate.executeQuery(JDBCTemplate.java:189)
     at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:89)
     at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)
     at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:67)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Thanks
Anindya

Hi actdi,
This is my KM_IKM SQL Incremental Update.xml code:-
and I have find it(for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++)) and high lighted it(Bold Text).
So, please advise.
Here is the main part of this code because the code is too long to post.It exceeds maxlength for the msg.
So here it is:
<Object class="com.sunopsis.dwg.dbobj.SnpTxtHeader">
<Field name="Enc" type="java.lang.String">null</Field>
<Field name="EncKey" type="java.lang.String">null</Field>
<Field name="ITxt" type="com.sunopsis.sql.DbInt"><![CDATA[1695003]]></Field>
<Field name="ITxtOrig" type="com.sunopsis.sql.DbInt"><![CDATA[102]]></Field>
<Field name="SqlIndGrp" type="java.lang.String"><![CDATA[2]]></Field>
<Field name="Txt" type="java.lang.String"><![CDATA[insert into <%=odiRef.getTable("L","INT_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "(((INS or UPD) and !TRG) and REW)")%>,
IND_UPDATE
*<%for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++){%>*
<%=odiRef.getDataSet(i, "Operator")%>
select <%=odiRef.getPop("DISTINCT_ROWS")%>
<%=odiRef.getColList(i,"", "[EXPRESSION]", ",\n\t", "", "(((INS or UPD) and !TRG) and REW)")%>,
<% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
JRN_FLAG IND_UPDATE
<%} else {%>
'I' IND_UPDATE
<%}%>
from <%=odiRef.getFrom(i)%>
where (1=1)
<%=odiRef.getJoin(i)%>
<%=odiRef.getFilter(i)%>
<%=odiRef.getJrnFilter(i)%>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<%}%>
]]></Field>
</Object>
<Object class="com.sunopsis.dwg.dbobj.SnpLineTrt">
<Field name="AlwaysExe" type="java.lang.String"><![CDATA[0]]></Field>

Uploading data from an external table with a where clause

Hi,
How do insert data from an external table in to a table already created in the database where person_id = person-_id on the external table?
Example:
External table
XX_EXTERNAL_TBL (Person_id, emp_number, emp_name)
Internal table
XX_SQL_LOADER_TEST (Person_id, emp_number, emp_name)
and person id already exists on the internal table (only want the last to columns to import where the person ids are the same)
Thanks

INSERT
INTO XX_SQL_LOADER_TEST
SELECT *
    FROM XX_EXTERNAL_TBL
    WHERE Person_id IN (
                        SELECT Person_id
                          FROM XX_SQL_LOADER_TEST
/SY.

Scheduling Problem for uploading Data from Flat file to SAP

Hi guys,
I am facing a weared problem in uploading some leave records in z table. The code is working fine if we run it through se38 after selecting the file from a shared location from production server which has all the access rights.
This folder lies in the \usr folder of SAP Production.
I have kept all the Flat files in the shared path "
Tis-mum-iz-s1\migration\SAP-INT\leave\" ...
To give u exact directory structure..
Tis-mum-iz-s1 is the Server Name
usr is the SAP System folder used for uploads and downloads
usr |
...-> Migration |
                  -> SAP-INT |
                             -> leave -> (Flat Files)
Migration folder is shared with all rights.
Obviously, we cannot give shared drive as the variant in the scheduler.
So i use the system path i.e. \usr\sap\tmp\migration\sap-int\leave\ as the variant.
All my other download programs are working fine with this path as a variant...
But my this particular upload program does not work with this path....
I am giving u my code...
TATA INTERACTIVE SYSTEMS (A Division of TATA INDUSTRIES LIMITED)
REPORT      : ZMIGRATE_ZLEAVE
DESCRIPTION : To Upload the Leave data. (ZLEAVE)
CREATED BY : Abhishek Bachhawat
CREATED ON : 01.09.2005
CONSULTANT : ANAND
REPORT ZMIGRATE_ZLEAVE.
TABLES: ZLEAVE.
data: begin of wtab,
          MANDT(3),
          ZLVID(8),
          PERNR(8),
          ZSTDT(8),
          ZENDT(8),
          ZDAYS(4),
          AEDAT(8),
          ERDAT(8),
      end of wtab,
      itab like WTAB occurs 0 WITH HEADER LINE.
data: temp like zleave occurs 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK file
               WITH FRAME TITLE text-005.
parameters: file like rlgrap-filename Obligatory.
Concatenate File SY-DATUM '_Leave.txt' into File.
SELECTION-SCREEN END OF BLOCK file.
at SELECTION-SCREEN ON VALUE-REQUEST FOR file .
CALL FUNCTION 'WS_FILENAME_GET'
    IMPORTING
      FILENAME = file.
IF SY-SUBRC <> 0.
ENDIF.
start-of-selection.
if file ne space.
    CALL FUNCTION 'WS_UPLOAD'
      EXPORTING
        FILENAME = FILE
        FILETYPE = 'DAT'
      TABLES
        DATA_TAB = ITAB.
else.
    message e000(zps) with 'Specify a file'.
endif.
SORT ITAB BY ZLVID.
LOOP AT ITAB.
    REFRESH TEMP.
    CLEAR TEMP.
    TEMP-MANDT = sy-mandt.
    TEMP-ERDAT = SY-DATUM.
    TEMP-ZLVID = ITAB-ZLVID.
    TEMP-PERNR = ITAB-PERNR.
    TEMP-ZSTDT = ITAB-ZSTDT.
    TEMP-ZENDT = ITAB-ZENDT.
    TEMP-ZDAYS = ITAB-ZDAYS.
    TEMP-AEDAT = ITAB-AEDAT.
    TEMP-ERDAT = ITAB-ERDAT.
    APPEND TEMP.
    SELECT SINGLE *
           FROM   ZLEAVE
           WHERE ZLVID = TEMP-ZLVID
           AND    PERNR = TEMP-PERNR.
    IF SY-SUBRC = 0.
      UPDATE ZLEAVE SET ZSTDT = TEMP-ZSTDT
                        ZENDT = TEMP-ZENDT
                        ZDAYS = TEMP-ZDAYS
                        AEDAT = TEMP-AEDAT
                        ERDAT = TEMP-ERDAT
             WHERE ZLVID = TEMP-ZLVID
             AND   PERNR = TEMP-PERNR.
    ELSE.
      INSERT ZLEAVE FROM TABLE TEMP.
      COMMIT WORK.
    ENDIF.
ENDLOOP.

Hi,
open dataset file for input in text mode.
check sy-subrc = 0.
while sy-subrc = 0.
read dataset file into wa.
if sy-subrc = 0.
append wa to itab.
else.
    exit.
endif.
endwhile.
close dataset file.
regards
Siggi
PS: check also the F1-help for open, read and close statements!

Upload data from excel to Table maintance

Hi,
Shall we upload excel file data through Table maintanance generator and shall we download data from Table maintanance to Excel directly, if possible how we can do?
Regards
Ganesh

It is not possible. There is 3rd party software, such as WinShuttle, among others, that allows data exchange between SAP and Excel.

Script to upload data from excel to table.

Hi,
Am having a different scenario.
I need to create a script to load the data from excel into oracle table.
For eg: When user1 has emp1.csv file then the datas should be loaded into emp table. at the same time user 2 has emp2.csv file then the datas should be inserted in the same emp table. Likewise my user's has different .csv files of having same template. I need to upload all those datas into the same table.
How can i achieve it
regards,
Prasad K T,
9840021070.

Hi Prasad,
You can use Sql loader tool (sqlldr) in APPEND mode to load the data from csv file to the target table. The APPEND would not delete the existing data from the table.
Your control file may look like this:
LOAD DATA
INFILE 'emp1.csv'
BADFILE 'bad_emp1.csv'
APPEND
INTO TABLE mailing_list
FIELDS TERMINATED BY ","
( field1,
field2,
Regards,
Sahir

Problem in Uploading Data From R/3 Prod to BW Development

Hi Friends,
When i transfer master data from R/3 prod to Bw prod,it upload data to infobject what i schedule first.if i schedule for second infobject,it remains in processing.
Eg: I upload 0Division and 0Material from R/3 prod to Bw prod.If i schedule 0divisionfirst, it will update data.If I schedule next to 0Material,in monitor it shows "(0 records from 0) ".If i restart the Bw prod and i update 0material then it will update.again for next infobject it shows "(0 records from 0)".if i restart Bw Prod it solved.but the same problem for other infobject.
Waiting for your inputs.
Thanks in advance.Have a great day
Rgds,
Suren.

Hi Surendhar,
Did you try to check the connection b/w ypur source system and the target system?
You can do it by executing T.Code RSA1-> Select Source Systems-> Right click your source system-> Check.
Also, pls check ST22 for any short dumps and SM21 for system logs.
Hope it helps!!!!
Amit
Message was edited by: Amit

Problem in uploading data from psa to active data and change log dso.

hi experts
my data from psa is coming to new data dso but not to active data and change log dso. can you please help me out...

Uday,
Please select the request from Manage screen of DSO and click on Activate, pop-up comes again select the request and click on Start. ( If it is Standard DSO ).
In case of Write optimized DSO you need not to activate it.
Regards,
Ramkumar.

Problem while uploading data from flat file

hi friends,
suppose if there are 100 records in flat file , if 20 records uploaded with out any problem and if error occurs while uploading remaing data . is necessary to upload entire data again or else only remaining data should be uploaded?
i had used call transaction for purchase order application?
please give me reply soon its urgent
thanks & regards
priya

Hi Hari,
you have to upload the remaining data.
as u have used CT method, do 1 thing trap the error data in runtime & prepare another flat file. next time correct the data in new flat file. & run the DBC program again with this new flat file.
Reward if useful
Regards
ANUPAM

Problem in extracting data from Z totals table (special Ledger)

Hi Gurus,
I am in a task of pulling in specific fields from the Z Totals Table of Special Purpose Ledger into the cube. We only need totals records and do not need line items.
In SBIW, i have generated the transfer structure and datasource for totals table as per the steps of Generic extraction.
The problem is that am not able to see all the fields (like balance carried forward, total transactions) in the selection fields screen. While extracting i choose totals records only. But now my datasource got generated and am able to see that it is active (green). But some important fields like balance are missing.
Please let me know your suggestions / ideas.
Thanks
Shreya

We have the exact same Challenge and Issue. When I view my generated extract structure 3FI_SL_ZB_TT, I don't see any of my key figures. This was created off the Special Ledger Summary or totals table.
For Instance, I need fields KSLVT through KSL16. That is, Balance Carried forward in Group currency (period 0) and, total of transactions of the period in group currency, (periods 1-16). I don't see these at all in the generated extract structure. Does that mean it must be appended in via transaction RSA6?
Also, to get the Balance Carried forward do I have to add 0BALANCE to the extract structure?
Finally, besides the beginning balance, which wiil remain constant, can I get Month-end Year To Date Balances using this approach. Note, I don't need detail from the line items table. I just want to make sure I don't need to use that in concert with a Delta and ODS to get my Month End YTD Balance. I only need this cube for Balances.
Thanx,
Joe M

Uploading data from an excel to internal table.

Hi All,
I have a small problem when uploading data from an excel sheet to internal table using the function "GUI_UPLOAD".
Some garbage value is getting stored in the internal table after the upload. If i change the format of the file to ".txt" then its working fine. Pls help me out to upload the data frm Excel to Internal Table.
Thanks.
Sirisha.

hi
good
pls check this code , this might help you to solve your problem
Multiple excel sheets generation in a workbook
CREATE OBJECT EXCEL 'EXCEL.SHEET'.
GET PROPERTY OF EXCEL 'Application' = APPLICATION.
SET PROPERTY OF APPLICATION 'Visible' = 1.
CALL METHOD OF APPLICATION 'Workbooks' = BOOKS.
CALL METHOD OF BOOKS 'Add' = BOOK.
CALL METHOD OF BOOK 'WORKSHEETS' = SHEET.
CALL METHOD OF SHEET 'ADD'.
Fill all the sheets with relavant data
PERFORM SHEET1 TABLES ITAB1.
PERFORM SHEET2 TABLES ITAB2.
PERFORM SHEET3 TABLES ITAB3.
PERFORM SHEET4 TABLES ITAB4.
Quit the excel after use
CALL METHOD OF EXCEL 'QUIT'.
FREE OBJECT: COLUMN,SHEET,BOOK,BOOKS,APPLICATION,EXCEL. "NO FLUSH.
CLEAR V_SHEET.
FORM FILL_CELL USING ROW COL VAL.
CALL METHOD OF SHEET 'cells' = CELL NO FLUSH
EXPORTING #1 = ROW #2 = COL.
SET PROPERTY OF CELL 'value' = VAL.
FREE OBJECT CELL NO FLUSH.
ENDFORM. " FILL_CELL
FORM SHEET1 TABLES ITAB1 STRUCTURE ITAB1.
V_SHEET = Sheet Name.
V_NO = V_NO + 1.
CALL METHOD OF BOOK 'worksheets' = SHEET NO FLUSH EXPORTING #1 = V_NO.
SET PROPERTY OF SHEET 'Name' = V_SHEET NO FLUSH.
PERFORM FILL_SHEET1 TABLES ITAB1 USING V_NO V_SHEET.
CALL METHOD OF SHEET 'Columns' = COLUMN.
FREE OBJECT SHEET.
CALL METHOD OF COLUMN 'Autofit'.
FREE OBJECT COLUMN.
ENDFORM.
Repeat above procedure for all sheets you want to add
FORM FILL_SHEET1
TABLES ITAB1 STRUCTURE ITAB1
USING V_NO V_SHEET.
ROW = 1.
PERFORM FILL_CELL USING ROW 1 'Column1 Name'.
PERFORM FILL_CELL USING ROW 2 'Column2 Name'.
PERFORM FILL_CELL USING ROW 3 'Column3 Name'.
ROW = ROW + 1.
LOOP AT ITAB1.
PERFORM FILL_CELL USING ROW 1 ITAB1-Column1.
PERFORM FILL_CELL USING ROW 2 ITAB1-Column2.
PERFORM FILL_CELL USING ROW 3 ITAB1-Column3.
ROW = ROW + 1.
ENDLOOP.
ENDFORM.
Repeat above procedure for all sheets you want to add
Try this also
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
Upload Excel file
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file
TABLES
i_tab_converted_data = i_XCEL[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks&regds,
Sree.
Edited by: Sree on Mar 17, 2008 8:07 AM

Problem of uploading data in Data Warehouse

I am using Oracle9i Warehouse Builder on Windows 2000 and i just started working in it. I am facing problem in uploading data from source schema to Target schema
     I) Created Source Moulde -- Link to One schema from where i have get data
     2) Created Warehouse Target Module -- I have created dimesnions , facts , Mapping and i deployed dimensions , fact and mapping. As a result of it i got dimension table , dimension , fact table , facts ,mapping package and TCL script for mapping. I deployed all of them and register TCL script with OEM .
     But my job created in OEM is not running. If run then does not upload any data and If I try to run job from the backend manually then it gives me message that No active job exist..
Thanks in advance
Surinder

I was getting the same error. I don't know if a step failed somewhere in the install or if I missed performing a manual step but I just fired up TOAD and manually inserted a record into the WB_RT_JOB table. I set the RTJ_JOBNAME = DEFAULT_JOB and RTJ_STATUS = BEGIN. The rest of the columns I just entered best guesses. I commited and then my job would run. I guess it just needs a seed record.
Lewis

Problem in uploading data from program to table

Similar Messages

Maybe you are looking for