Problem in uploading data in so10 tr.code uding BDC method

Hi Experts,
i am uploadign data into the tr.code SO10. by usimg BDC call transaction method. The data is in the flat file.
now my problem is when the text length is more than 72 characters the program is not creating the text. and it is saying that text length is more.
but in my flat file the text length is more tha 72 characters.how can i do it?
my porgram is:
types: begin of i_so10,
       TDNAME type TDOBNAME,
       TDID    type TDID,
       TDSPRAS type TDSPRAS,
       TEXT    type STRING,
       end of i_s010.
data: it_so10 type standard table of i_so10,
      wa_so10 type i_so10.
loop at it_so10 into wa_so10.
perform bdc_dynpro      using 'SAPMSSCE' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSSCE-TDNAME'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CREA'.
perform bdc_field       using 'RSSCE-TDNAME'
                              wa_so10-TDNAME.
perform bdc_field       using 'RSSCE-TDID'
                              wa_so10-TDID.
perform bdc_field       using 'RSSCE-TDSPRAS'
                              wa_so10-TDSPRAS.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=EDNP'.
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              wa_so10-text.
call transaction 'so10' using it_bdcdata
                                MODE 'A'
                                UPDATE 'S'.
endloop.
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              wa_so10-text.
the text stored in wa_so10-text is more than 72 characters.but RSTXT-TXLINE(02) length is only 72 characters.
the recording code at the screen of store text is:
perform bdc_field       using 'RSTXT-TXLINE(02)'
                              'tttttttttttttttttttttttttttttttttttttt'
                            & 'tttttttttttttttttttttttttttttttttt'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(03)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=EDNP'.
perform bdc_field       using 'RSTXT-TXLINE(03)'
                              'tttttttttttttttttttttttttttttttttttttt'
                            & 'tttttttttttttttttttttttttttttttttt'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=EDNP'.
perform bdc_field       using 'RSTXT-TXLINE(04)'
                              'tttttttttttttttttttttttttttttttttttttt'
                            & 'tttttttttttttttttttttttttttttttttt'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(05)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TXSV'.
perform bdc_field       using 'RSTXT-TXLINE(05)'
                              'tttttttttttttttttttttttttttttttttttttt'.
perform bdc_dynpro      using 'SAPLSTXX' '1100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RSTXT-TXLINE(05)'.
give solution for this.
thanks in advance,
Mythily.

Hi all,
i am not getting any useful answers. will help me this regard.
thanks

Similar Messages

Problem in uploading data for multiple company code in FB60

Hi Experts,
I am uploading data to tcode FB60 using bdc. If I have say 2 records in my file with same company code,
It;s successfully posting the invoices.
But if there are records with different company code, it's posting only the first one.
Please suggest me some solution.
Thanks.
Krishan

Hi,
This is a njoy tcode....U have to do some settings before using the tcode....
Go to tcode FB60 and give the company code ( if it is ur first login to the tcode then only it wil ask) .then u will get the screen to enter the document number and other stuffs....
In that screen go to EDIT OPTIONS BUTTON on application tool bar on the right hand upper corner...
U will get another screen in that check the check box which says NO COMPANY CODE PROPOSAL..and click on save .....
After use this tcode for the bdc program and no error will come.
Please let me know if u have any problems...
Regards,
Rohan.
Edited by: Rohan on Feb 2, 2009 12:29 PM

Problem while uploading data with GUI UPLOAD Function

Hi,
I am facing problem while uploading data with FM GUI UPLOAD in out text file there are 7 row but after the FM GUI UPLOAD there are 14 entries are coming in Internal table and each alternate row is coming as blank with 0000 in some column in internal table first row is proper and second line is blank so on.
what can be the problem .
The program in which we are using this we are using it from last 2 year but we are facing problem today only.
regards,
zafar

Hi,
The file formate is same as it is from last two years it is automatically generated by one another bar code server and there is no change in the file formate.
So waht can be the problem to check any inconsistancy in system i have develop a samll program fro uploading a text file with same function module , but it is working fine.
regards,
zafar

Problem of uploading data in Data Warehouse

I am using Oracle9i Warehouse Builder on Windows 2000 and i just started working in it. I am facing problem in uploading data from source schema to Target schema
     I) Created Source Moulde -- Link to One schema from where i have get data
     2) Created Warehouse Target Module -- I have created dimesnions , facts , Mapping and i deployed dimensions , fact and mapping. As a result of it i got dimension table , dimension , fact table , facts ,mapping package and TCL script for mapping. I deployed all of them and register TCL script with OEM .
     But my job created in OEM is not running. If run then does not upload any data and If I try to run job from the backend manually then it gives me message that No active job exist..
Thanks in advance
Surinder

I was getting the same error. I don't know if a step failed somewhere in the install or if I missed performing a manual step but I just fired up TOAD and manually inserted a record into the WB_RT_JOB table. I set the RTJ_JOBNAME = DEFAULT_JOB and RTJ_STATUS = BEGIN. The rest of the columns I just entered best guesses. I commited and then my job would run. I guess it just needs a seed record.
Lewis

Problem in uploading data to psa.

Hi experts,
im having problems in uploading data to psa using info package in HR info area.
while monitoring the info package the following error comes with red traffic signal..
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
So , please help me in this regard...
waiting for your reply...

Hi,
You may need to check for pending TRFCs/IDOCs in source system in Tcode SM58 and BD87 and process them manually.
ProcessI DOCS Manually
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/content.htm
&messageID=2311994
Thanks,
JituK

Encounter Problem when upload Data for T-Code CJ92

Dear All,
I want to upload Standard WBS element through transaction code CJ92. I am encountering a problem when I want to upload more than 13 Standard WBS for a project using recording (SHDB).
I have also tried to upload data through BAPI u201CBAPI_BUS2054_CREATE_MULTIu201D but this BAPI didnu2019t work for standard WBS.
Please provide me a solution to upload Standard WBS (CJ92).

Thanks Shyam,
But this BAPI "BAPI_PROJECT_MAINTAIN" works only for operative WBS and I want to upload Standard WBS. The T-Code to create Standard WBS is CJ92. The screen upload can't be possible due to screen limitations.
Please provide me any solution to upload Standard WBS.
regards,
Saif

Problem in Uploading Data From R/3 Prod to BW Development

Hi Friends,
When i transfer master data from R/3 prod to Bw prod,it upload data to infobject what i schedule first.if i schedule for second infobject,it remains in processing.
Eg: I upload 0Division and 0Material from R/3 prod to Bw prod.If i schedule 0divisionfirst, it will update data.If I schedule next to 0Material,in monitor it shows "(0 records from 0) ".If i restart the Bw prod and i update 0material then it will update.again for next infobject it shows "(0 records from 0)".if i restart Bw Prod it solved.but the same problem for other infobject.
Waiting for your inputs.
Thanks in advance.Have a great day
Rgds,
Suren.

Hi Surendhar,
Did you try to check the connection b/w ypur source system and the target system?
You can do it by executing T.Code RSA1-> Select Source Systems-> Right click your source system-> Check.
Also, pls check ST22 for any short dumps and SM21 for system logs.
Hope it helps!!!!
Amit
Message was edited by: Amit

Scheduling Problem for uploading Data from Flat file to SAP

Hi guys,
I am facing a weared problem in uploading some leave records in z table. The code is working fine if we run it through se38 after selecting the file from a shared location from production server which has all the access rights.
This folder lies in the \usr folder of SAP Production.
I have kept all the Flat files in the shared path "
Tis-mum-iz-s1\migration\SAP-INT\leave\" ...
To give u exact directory structure..
Tis-mum-iz-s1 is the Server Name
usr is the SAP System folder used for uploads and downloads
usr |
...-> Migration |
                  -> SAP-INT |
                             -> leave -> (Flat Files)
Migration folder is shared with all rights.
Obviously, we cannot give shared drive as the variant in the scheduler.
So i use the system path i.e. \usr\sap\tmp\migration\sap-int\leave\ as the variant.
All my other download programs are working fine with this path as a variant...
But my this particular upload program does not work with this path....
I am giving u my code...
TATA INTERACTIVE SYSTEMS (A Division of TATA INDUSTRIES LIMITED)
REPORT      : ZMIGRATE_ZLEAVE
DESCRIPTION : To Upload the Leave data. (ZLEAVE)
CREATED BY : Abhishek Bachhawat
CREATED ON : 01.09.2005
CONSULTANT : ANAND
REPORT ZMIGRATE_ZLEAVE.
TABLES: ZLEAVE.
data: begin of wtab,
          MANDT(3),
          ZLVID(8),
          PERNR(8),
          ZSTDT(8),
          ZENDT(8),
          ZDAYS(4),
          AEDAT(8),
          ERDAT(8),
      end of wtab,
      itab like WTAB occurs 0 WITH HEADER LINE.
data: temp like zleave occurs 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK file
               WITH FRAME TITLE text-005.
parameters: file like rlgrap-filename Obligatory.
Concatenate File SY-DATUM '_Leave.txt' into File.
SELECTION-SCREEN END OF BLOCK file.
at SELECTION-SCREEN ON VALUE-REQUEST FOR file .
CALL FUNCTION 'WS_FILENAME_GET'
    IMPORTING
      FILENAME = file.
IF SY-SUBRC <> 0.
ENDIF.
start-of-selection.
if file ne space.
    CALL FUNCTION 'WS_UPLOAD'
      EXPORTING
        FILENAME = FILE
        FILETYPE = 'DAT'
      TABLES
        DATA_TAB = ITAB.
else.
    message e000(zps) with 'Specify a file'.
endif.
SORT ITAB BY ZLVID.
LOOP AT ITAB.
    REFRESH TEMP.
    CLEAR TEMP.
    TEMP-MANDT = sy-mandt.
    TEMP-ERDAT = SY-DATUM.
    TEMP-ZLVID = ITAB-ZLVID.
    TEMP-PERNR = ITAB-PERNR.
    TEMP-ZSTDT = ITAB-ZSTDT.
    TEMP-ZENDT = ITAB-ZENDT.
    TEMP-ZDAYS = ITAB-ZDAYS.
    TEMP-AEDAT = ITAB-AEDAT.
    TEMP-ERDAT = ITAB-ERDAT.
    APPEND TEMP.
    SELECT SINGLE *
           FROM   ZLEAVE
           WHERE ZLVID = TEMP-ZLVID
           AND    PERNR = TEMP-PERNR.
    IF SY-SUBRC = 0.
      UPDATE ZLEAVE SET ZSTDT = TEMP-ZSTDT
                        ZENDT = TEMP-ZENDT
                        ZDAYS = TEMP-ZDAYS
                        AEDAT = TEMP-AEDAT
                        ERDAT = TEMP-ERDAT
             WHERE ZLVID = TEMP-ZLVID
             AND   PERNR = TEMP-PERNR.
    ELSE.
      INSERT ZLEAVE FROM TABLE TEMP.
      COMMIT WORK.
    ENDIF.
ENDLOOP.

Hi,
open dataset file for input in text mode.
check sy-subrc = 0.
while sy-subrc = 0.
read dataset file into wa.
if sy-subrc = 0.
append wa to itab.
else.
    exit.
endif.
endwhile.
close dataset file.
regards
Siggi
PS: check also the F1-help for open, read and close statements!

I have Problem in Upload Date formate

Hi Friends,
I have one doubt on WDJ.
I have done one Application that application having one functionality that is Download data in to Excel. After download data into excel we can change the DATE cell and again upload Excel Data.
Here what I am getting problem is download data into SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy"); this date forame. And again upload data into Same date formate
But it is not uploaded
When I download data into SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy"); this date format that time it will upload successfully.
This is for Dowload data into Excel
if(StockEle.getConf_Shp_Date()==null)
ExcelEle.setConf_Shp_Date("null");
else
SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy");
Date ConfShpDate = wdContext.nodePoDetails_OutTab().getPoDetails_OutTabElementAt(i).getConf_Shp_Date();
String ConfShpDate1 = sdf.format(ConfShpDate); // will give dd-MM-yyyy
ExcelEle.setConf_Shp_Date(ConfShpDate1);
Here ExcelEle.setConf_Shp_Date data type is String
This is for Upload data
try
SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy");
//Date dt = sdf.parse(ele.getConf_Shp_Date());
// java.util.Date Date dt = sdf.parse(ele.getConf_Shp_Date());
java.util.Date dt = sdf.parse(ele.getConf_Shp_Date());
java.sql.Date sqlDate = new java.sql.Date(dt.getTime());
eleout.setEindt(sqlDate);
catch(Exception e)
e.printStackTrace();
eleout.setEindt data type is Date.
How to Solve this issue I want upload this type of date (dd.MM.yyyy).
Regards
Vijay Kalluri

Hi
Try to format it before sending it back , try using these code
// Create Date object. Date date = new Date();
//Specify the desired date format
String DATE_FORMAT = "MM/dd/yyyy";
//Create object of SimpleDateFormat and pass the desired date format.
SimpleDateFormat sdf = new SimpleDateFormat(DATE_FORMAT);
/* Use format method of SimpleDateFormat class to format the date. */
System.out.println("Today is " + sdf.format(date) );
Best Regards
Satish Kumar

Problem during uploading data Using BDC

While I'm trying to upload data for T.Code J1IS using BDC, Value for the field Net.***.value ( J_1IASSVAL-J_1IVALNDP) is not getting populated on the screen.
Pls help.

Hi,
This is a Currency Field so you need to pass this to a Char field first and then pass to BDCTAB-FVAL.
" This is a common problem with BDC with other data types even with Date and Quantity and Numeric types
Please note while passing values to BDCTAB all the values should be passed in CHAR form only
Cheerz
Ram.

Problem with upload data from CRM to BI system

When I try to perform full upload data from CRM to BI system with data source 0BPARTNER_ATTR (active version: Excutable). I waited for a long time but there are not any records were transfered (total records need to upload are 130) . I checked the log and can't find any errors.
Pls help me solve this problem.
Thanks and regard

Hi,
on the next day, the process finished with status not success.
The detail errors is:
Extraction(messages): Missing messages
          Missing message: Request received
          Missing message: Number of sent records
          Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
          Data package 1: arrived in BW; Processing: Selected number does not agree with transferred n
          Request IDoc: Application document posted
          Info IDoc 2: sent, not arrived; Data passed to port OK
          Info IDoc 1: sent, not arrived; Data passed to port OK
          Info IDoc 3: sent, not arrived; Data passed to port OK
          Info IDoc 4: sent, not arrived; Data passed to port OK
However, the data has been uploaded to infoobject. Pls explain to me about this error and why the data can be uploaded with this error.
Regard

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

SQL Loader Oracle 10g problem in upload date with time data -- Very urgent.

Hi
I am trying to upload data using SQL loader. There are three columns in the table
defined as DATE. When I tried upload a data like this '2007-02-15 15:10:20', it is not loading time part. The date stored as 02/15/2008' only. There is not time on that. I tried with many different format nothing work. Can please help me ?
I have also tried with to_date --> to_timestamp it did not work.
The application is going to be in production, I cannot change DATE to TIME STAMP. This is very urgent.
LASTWRITTEN "decode(:LASTWRITTEN,'null',Null, to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:Mi:SS'))",
CREATEDON "decode(:CREATEDON,'null',Null, to_date(:CREATEDON,'YYYY-MM-DD HH24:Mi:SS'))",
LASTUPDATEDON(21) "decode(:LASTUPDATEDON,'null',Null, to_date(:LASTUPDATEDON(21),'DD/MM/YYYY HH24:MI:SS'))"

Your problem is most likely in decode - the return type in your expression will be character based on first search value ('null'), so it will be implicitly converted to character and then again implicitly converted to date by loading into date column. At some of this conversions you probably are loosing your time part. You can try instead use cast:
SQL> desc t
Name                                      Null?    Type
LASTWRITTEN                                        DATE
CREATEDON                                          DATE
LASTUPDATEDON                                      DATE
SQL> select * from t;
no rows selected
SQL> !cat t.ctl
LOAD DATA
INFILE *
INTO TABLE T
TRUNCATE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
LASTWRITTEN
"decode(:LASTWRITTEN,'null',cast(Null as date),
to_date(:LASTWRITTEN,'YYYY-MM-DD HH24:MI:SS'))",
CREATEDON
"decode(:CREATEDON,'null',cast(Null as date),
to_date(:CREATEDON,'YYYY-MM-DD HH24:MI:SS'))",
LASTUPDATEDON
"decode(:LASTUPDATEDON,'null',cast(Null as date),
to_date(:LASTUPDATEDON,'DD/MM/YYYY HH24:MI:SS'))"
BEGINDATA
2007-02-15 15:10:20,null,null
null,2007-02-15 15:10:20,null
null,null,15/02/2007 15:10:20
SQL> !sqlldr userid=scott/tiger control=t.ctl log=t.log
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Feb 29 00:20:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 3
SQL> select * from t;
LASTWRITTEN         CREATEDON           LASTUPDATEDON
15.02.2007 15:10:20
                    15.02.2007 15:10:20
                                        15.02.2007 15:10:20Best regards
Maxim

Problem in uploading data for the Tcode CA02

Hi,
I am trying to upload the data for the Tcode ca02 and i am facing a problem i.e. the uploading for the for the 18th inspection characterstic is not able to being uploaded. I had checked the code of it and the logic is there.
It was previously uploading the data for it,but iit is not doing now. I had cheked the program of the screen also the fields are also present..

would u plz send code.so i can check

Problem while uploading data through F-43

Hello Experts ,
I am facing a problem while data uploading through F-43.
Suppose I have many vendors with having several debit and credit items for each.So in t code same screen will appear for same vendor several times where we have to enter debit / credit items.
Please suggest how to solve this issue through LSMW/BDC program.
Thanks in adv.
A Miter.

Hi..
Use BDC Recording MEthod ...
Develop BDC program, Before Recording the Transaction sit with Functional Consulatnt for REcord The f-43.
After that that u can do ur coding and built ur own logic.
Prabu

Problem in uploading data in so10 tr.code uding BDC method

Similar Messages

Maybe you are looking for