Problem installing Forte Developer 6 for C

I am experiencing some installing our new Forte Developer 6 for C on a SunOS 5.6. When I type ./installer I get this prompt:
Installing Solaris Product Registry's /usr/lib/libwsreg.so library
[SUNWwsr2 package] which is required by the installer.
Okay to install /usr/lib/libwsreg.so [SUNWwsr2]? <y|n>:
After pressing "y" nothing happens. According the the instructions an Install Forte Developer 6 menu should come up but it never does.
We have tried to install the SUNWwsr2 package manually but that wasn't successful either.
The problem might be our OS configuration, which we have customized a bit. (I notice that system requirements for Sun Workshop 6 is either a Developer or Full Cluster Distribution OS configuration.)
I would appreciate any suggestions anyone might have.
Thanks in advance!
Weldon Whipple
[email protected]

Hello,
I am looking for a new license for Forte 6.0 and Forte 6.2 - but have not had much luck working with the Oracle/Sun team. Noone seems to want to upgrade to Studio 12 for this code because it is so old, but sometimes needs to be recompiled. I believe that the engineers are using the C or C++ compilers. I noticed that earlier versions have a free license, but not either of these two. If these are no longer supported, will these licenses become free soon? I have the licenses on a Solaris 2.5.6 system and I would like the licenses to run on a Solaris 8 server, so that I can retire the Solaris 2.5.6 system. Is there any chance that I can get a new license? Any chance that these licenses will become free and not dependent on the system? Any recommendations?
Thank you,
Jean

Similar Messages

Problems installing Netweaver Developer Workplace 2004

Dear Netweaver experts,
I have severe problems installing Netweaver Developer Workplace 2004 on windows XP.
I used sapinst for installing the Java sytem (Menue Java System->Oracle->Custom Installation).
After running through 34 of the 35 phases during which the sapinst tries to start the freshly installed J2EE engine I got the error :
CJSlibModule::writeError_impl() CJS-20057 Starting J2EE Engine J00 of SAP system J2E failed: after 84 s the state of the engine changed from "Starting" to "Stopped".
and changed my memory setting using the configtool.
Afterwards I tried to start the server in my MMC and it seemed to be running.
INFO
Execution of the command "D:\usr\sap\J2E\JC00\exe/startsap.exe 'name=J2E' 'nr=00' 'SAPDIAHOST=K-0017553'" finished with return code 0. Output: STARTSAP continues...
But when I had a closer look at the Process table at the MMC I saw that the server0 wasn't running
(Server 0 stopped Exit Code -2).
Now I don't know how to proceed.
Does someone of you know how I could get my J2EE server running ?
Below you find my present settings :
trc file: "D:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
node name   : ID3806050
pid         : 5496
system name : J2E
system nr. : 00
started at : Tue Dec 02 11:16:19 2008
arguments   :
    arg[00] : D:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
    arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC00_K-0017553
    arg[02] : -DSAPINFO=J2E_00_server
    arg[03] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC00_K-0017553
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
-> ms host    : K-0017553
-> ms port    : 3601
-> OS libs    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : K-0017553
-> ms port    : 3601
-> os libs    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID3806000 : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID3806050 : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID3806000            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] ID3806050            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
[Thr 5312] Tue Dec 02 11:16:19 2008
[Thr 5312] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5312] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4100] JLaunchRequestFunc: Thread 4100 started as listener thread for np messages.
[Thr 3328] WaitSyncSemThread: Thread 3328 started as semaphore monitor thread.
[Thr 5312] Tue Dec 02 11:16:20 2008
[Thr 5312] INFO: Invalid property value [JLaunchParameters/]
[Thr 5312] JStartupIReadSection: debug mode is specified by program arguments
[Thr 5312] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_18
JStartupIReadSection: read node properties [ID3806050]
-> node name       : server0
-> node type       : server
-> java path       : C:\j2sdk1.4.2_18
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -Djava.awt.headless=true -XX:PermSize=192m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:DisableExplicitGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:UseParNewGC -Drdbms.driverLocation=D:/Oracle/Ofs33/jdbc/lib/classes12.jar -Dsys.global.dir=D:/usr/sap/J2E/SYS/global/
-> java vm version : 1.4.2_18-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type    : server
-> java vm cpu     : x86
-> heap size       : 1024M
-> init heap size : 256M
-> root path       : D:\usr\sap\J2E\JC00\j2ee\cluster\server0
-> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class      : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters      :
-> debuggable      : yes
-> debug mode      : yes
-> debug port      : 50021
-> shutdown timeout: 120000
[Thr 5312] JLaunchISetDebugMode: set debug mode [yes]
[Thr 3648] JLaunchIStartFunc: Thread 3648 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack   : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Djava.security.policy=./java.policy
-> arg[ 3]: -Djava.security.egd=file:/dev/urandom
-> arg[ 4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 7]: -Djco.jarm=1
-> arg[ 8]: -Dsun.io.useCanonCaches=false
-> arg[ 9]: -XX:NewSize=170m
-> arg[ 10]: -XX:MaxNewSize=170m
-> arg[ 11]: -XX:MaxPermSize=192m
-> arg[ 12]: -Djava.awt.headless=true
-> arg[ 13]: -XX:PermSize=192m
-> arg[ 14]: -XX:SurvivorRatio=2
-> arg[ 15]: -XX:TargetSurvivorRatio=90
-> arg[ 16]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 17]: -verbose:gc
-> arg[ 18]: -XX:+DisableExplicitGC
-> arg[ 19]: -XX:+PrintGCDetails
-> arg[ 20]: -XX:+PrintGCTimeStamps
-> arg[ 21]: -XX:+UseParNewGC
-> arg[ 22]: -Drdbms.driverLocation=D:/Oracle/Ofs33/jdbc/lib/classes12.jar
-> arg[ 23]: -Dsys.global.dir=D:/usr/sap/J2E/SYS/global/
-> arg[ 24]: -Dsys.global.dir=D:\usr\sap\J2E\SYS\global
-> arg[ 25]: -Dapplication.home=D:\usr\sap\J2E\JC00\j2ee\os_libs
-> arg[ 26]: -Djava.class.path=D:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_18\jre\bin\server;C:\j2sdk1.4.2_18\jre\bin;C:\j2sdk1.4.2_18\bin;D:\usr\sap\J2E\JC00\j2ee\os_libs;D:\Oracle\Ofs33\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC00\exe;D:\usr\sap\J2E\SYS\exe\run
-> arg[ 28]: -Xdebug
-> arg[ 29]: -Xnoagent
-> arg[ 30]: -Djava.compiler=NONE
-> arg[ 31]: -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=50021
-> arg[ 32]: -Dmemory.manager=1024M
-> arg[ 33]: -Xmx1024M
-> arg[ 34]: -Xms256M
-> arg[ 35]: -DLoadBalanceRestricted=yes
-> arg[ 36]: -Djstartup.mode=JCONTROL
-> arg[ 37]: -Djstartup.ownProcessId=5496
-> arg[ 38]: -Djstartup.ownHardwareId=V0317565360
-> arg[ 39]: -Djstartup.whoami=server
-> arg[ 40]: -Djstartup.debuggable=yes
-> arg[ 41]: -DSAPINFO=J2E_00_server
-> arg[ 42]: -DSAPSTARTUP=1
-> arg[ 43]: -DSAPSYSTEM=00
-> arg[ 44]: -DSAPSYSTEMNAME=J2E
-> arg[ 45]: -DSAPMYNAME=K-0017553_J2E_00
-> arg[ 46]: -DSAPDBHOST=
-> arg[ 47]: -Dj2ee.dbhost=K-0017553
[Thr 3648] JLaunchIAbortJava: abort hook is called
[Thr 3648] JLaunchCloseProgram: good bye (exitcode=-2)

Dear Netweaver experts,
I found the solution.
I took for my system (Win XP, 2,5 GB RAM) the settings posted below :
Maximum heap size : 512 MB
-Djava.security.policy=./java.policy
-Djava.security.egd=file:/dev/urandom
-Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-Djco.jarm=1
-Dsun.io.useCanonCaches=false
-XX:NewSize=170m
-XX:MaxNewSize=170m
-XX:MaxPermSize=192m
-Djava.awt.headless=true
-XX:PermSize=192m
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-XX:SoftRefLRUPolicyMSPerMB=1
-Xms512m
-verbose:gc
-XX:+DisableExplicitGC
Best regards,
Daniel
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-XX:+UseParNewGC

I am having problems installing new software for my ipod i keep getting a message that the network has timed out. I have tried two different computers and networks what else can I do?

I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?

Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

Dreamweaver keep freezing - I have problem installing the update for Dreamweaver cs5 -

Dreamweaver keep freezing - I have problem installing the update for Dreamweaver cs5

That is the perfect system for Dreamweaver.
The only thing that I can think of is to reinstall Dreamweaver. See Uninstall Creative Suite | CS5, CS5.5

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

Problem installing Forte CE 4.0 on W2K

Hi,
The problem is that I can�t install Forte on W2K. InstallShield Wizard starts but then nothing happens, I don�t know the reason, no messages are shown, any idea ?
Thanks
Mar

You probably will get more information and help at the SunOne/Forte Developer site: http://forte.sun.com/ffj/index.html The left hand side of the page has links to the knowledge base (which is pretty current) and to the forums. The Early Access forum has quiter a bit of info re install problems, search it. ( I think you'll have to register first, though - it's free)

Problem installing Oracle9i Developer Suite

When I try to install Oracle9i Developer Suite in my Windows ME system, the Universal Installer prompt me the following error message:
"Unable to setup inventory. You may not have proper permissions".
Does anyone know how to solve this problem.
I'm new to Oracle, sorry if this is a stupid question.
Thanks and regards
Ken

"Unable to setup inventory. You may not have proper permissions".
Yes, this error is infuriating.
In the case of a first-time installation of Oracle9i Database Release 2 Enterprise Edition on AIX 5.3, the answer was to -
1. Cancel the installation process.
2. On the server -
cd /etc
rm oraInst.loc oratab
3. Restart the installation process.
I don't know how applicable this solution is to Oracle9i Developer Suite, but would guess the problem is something similar.

Installing sql developer for a noob

i am running windows 7 64 bit....i am very new to oracle and i am trying to install sql developer but it keeps asking for a java path ....when i navigate to the java folder there are no options to proceed.... please advise thanks

You're better off asking over in the SQL Developer forum
SQL Developer
Evita

Problems installing Download! for PC Beta Version ...

I am trying to install Download! for PC beta version 1 onto my PC. But it brings up an error message saying
"Install Nokia PC Suite version 6.82.21 or later before installing Nokia Download!". Then it quits.
However I have PC Suite 6.85.14.1 already installed.
Has anyone else seenthis or am I doing something wrong.

I had the same problem and tried unsuccessfully several times to install this update though the software update. I did download and install in manually, and it worked with no problems. Here's the link I used: http://www.apple.com/downloads/macosx/apple/application_updates/javaformacosx105 update2.html

Problems installing Oracle9i Developer Suite on Red Hat 8.0

Can anyone help me out what does this error mean? I am trying to install the Developer Suite but it wont continue because of this error message keeps popping up.
Error in invoking target install of makefile /opt/oracle2/plsql/lib/ins_plsql.mk
Please help...Thanks
Ian

There must be some other messages.
It could be that your .prd file does not match exactly with your installation or you have forgotten to do some stage in the installation procedure...
These are only clues. Look at the .log files to see what happened.
Good luck.

Problem installing SSL certificate for CPS

I work at a medium-sized University, and we have used
Contribute 3 with CPS1.11 for well over a year. Recently, however,
the Contribute clients began having difficulty logging in to CPS.
At first this was intermittent, but is now constant. Adobe support
suggested replacing the CPS self-signed SSL certificate with a
genuine one, because apparently the self-signed certificate is
causing communication delays and timeouts.
I have the certificate, and am trying to use keytool (see
http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/keytool.html)
to install it, but it is asking me for a keystore password, which I
don't know. Apparently the standard defaults are "changeit" or
"passphrase", but neither of these work.
As a test, I created a fresh install of CPS and attempted to
list the keys in the keystore, but again was asked for a keystore
password and the defaults did not work. Adobe support suggested I
ask here. Anybody have any experience installing a certificate for
CPS?

Are you sure that the certificate needs to be installed to all users? Can you provide more details about the certificate and its purposes?
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new:
SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

Problem installing Audio Drivers for Windows XP on G550

I have tried all the posibilities to install sound drivers for Win XP on G550, but every attempt a big failure . Could someone help me to install sound drivers?
System gives error of Now Media Object.

try to download drivers from here

Problem installing oracle developer Suite 10g on window 7 64 bit

hi am in window 7 64-bit am trying to install my oracle developer suite am geting this error when installing
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\User
s\10017134\AppData\Local\Temp\OraInstall2012-09-21_08-15-55AM\installActions2012
-09-21_08-15-55AM.log
Please press Enter to exit...
i downlload the software from
http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html
my pc is window 7 professional service pack 1
64-bit operating system
now am geting this error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation, at which time they will be rechecked.
Continue? (y/n) [n]
i try to right click mycomputer->advance system setting->system properties->advance->performance->setting->advance->virtual memory->change->virtual memory
Edited by: ADF007 on 2012/09/21 9:22 AM
Edited by: ADF007 on 2012/09/21 9:49 AM
Edited by: ADF007 on 2012/09/24 12:12 PM

hi my installation fail am geting this error
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Net Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: 'C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp'
Start output from spawned process:
Parsing command line arguments:
Parameter "orahome" = C:\DevSuite
Parameter "orahnam" = DevSuite
Parameter "responsefile" = C:\DevSuite\network\install\netca_asinstall.rsp
Done parsing command line arguments.
The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to C:\DevSuite
Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***
User Selected: Cancel
The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to C:\DevSuite
Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***
User Selected: Yes/OK
End output from spawned process.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
Result code for launching of configuration assistant is: -1
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***
User Selected: Yes/OK
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file C:\DevSuite\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo Oracle Net Configuration Assistant
C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp
Error:*** Alert: One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured. A list of the assistants that need to be run is generated in the log of this session which is located at:
C:\Program Files (x86)\Oracle\Inventory\logs\installActions2012-09-21_10-14-35AM.log ***
Edited by: ADF007 on 2012/09/21 4:52 PM
Edited by: ADF007 on 2012/09/21 4:52 PM

Problem install SQL Developer in my iMac

Hello everybody!!
I´m a Spanish guy who is starting in the world of databases. This is my first year studying and I´ve always used SQL Developer on Windows but now I would like to use it on Mac.
I have installed the SQL Developer but when I try to create a new connection I get an error message, it says something like:
_"Error de E/S: The Network Adapter could not establish the connection"_
But is very strange for me because in Windows when I want to create a new connection, first of this, I have to create a new user in the SYSTEM connection, but now in Mac this connection (SYSTEM) doesn´t exist.
There are a lot changes between Windows´s version to Mac´s version.... can anyone help me please??
Thanks for your attention and excuse me for my English hehe!

Hi betico,
I have no idea if Oracle 10g Release 2 for Mac OS X Server 10.5.4 might also install and run properly on OS X 10.7.3. I do not use a Mac, but probably your best path forward is to use ...
Oracle VM Virtual Box:
http://www.oracle.com/technetwork/server-storage/virtualbox/downloads/index.html
to run a VM image packaged for a recent Oracle Technology Network Developer Day workshop:
http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html
That VM includes Oracle 11g2 Release 2, SQL Developer, and so on. And if you wish to run SQL Developer directly on OS X, you can still connect to the database running within the VM by altering the VM's network configuration to use a bridged adapter. Here is a post from another thread that discusses that:
Re: Proble to connect oracle DB from Sql Developer
Hope this helps,
Gary

Problem installing weblogic jdriver for oracle

Hi ,
I have installed WLS510 and Oracle8i Personal Edition on windows98. I have
put the c:\weblogic\bin\oci815_8 directory in the system path and
c:\oracle\ora81\jdbc\lib\classes102.zip in the CLASSPATH
Now when I try to test the connection using the following command:
$ java utils.t3dbping URL user password DB driver_class driver_URL
I get error :
Connecting to WebLogic with the WebLogic JDBC Driver
Can't connect with the WebLogic JDBC driver:
System.loadLibrary threw java.lang.UnsatisfiedLinkError
with the message 'no weblogicoci36 in java.library.path'.
Server StackTrace:
<not available>]
Could anyone please tell me what java.library.path is and where should I
find
weblogicoci36.
Thanks
Vishwajeet Lohakarey

java.library.path is Java System variable for seting directories where will java look out for native library modules (DLLs on NT). It is normally unset because DLLs are serached by standard NT algorithm (PATH variable, System dir) too.
weblogicoci36 is native module name of WL JDBC driver for Oracle that Java&NT couldn't find. Coresponding DLL file is in your c:\weblogic\bin\oci815_8 directory.
Problem could be in that if WL is started as NT Service,
a) PATH variable must be set for System not for User and
b) this setting don't take effect until NT restart.
VZ
"Vishwajeet Lohakarey" <[email protected]> wrote:
Hi ,
I have installed WLS510 and Oracle8i Personal Edition on windows98. I have
put the c:\weblogic\bin\oci815_8 directory in the system path and
c:\oracle\ora81\jdbc\lib\classes102.zip in the CLASSPATH
Now when I try to test the connection using the following command:
$ java utils.t3dbping URL user password DB driver_class driver_URL
I get error :
Connecting to WebLogic with the WebLogic JDBC Driver
Can't connect with the WebLogic JDBC driver:
System.loadLibrary threw java.lang.UnsatisfiedLinkError
with the message 'no weblogicoci36 in java.library.path'.
Server StackTrace:
<not available>]
Could anyone please tell me what java.library.path is and where should I
find
weblogicoci36.
Thanks
Vishwajeet Lohakarey

Problem installing Forte Developer 6 for C

Similar Messages

Maybe you are looking for