Problem Installing XP Pro on New Hard Drive

 
Hi,
I 'm trying to install xp pro on a new Hard Drive and, following formatting, a RED slider went across the screen and a message;  re-starting remove any disc from drive 'A' . At that point the screen went blank and hard drive light was lit. I took the xp disc out the CD drive and re-started I now get a screen asking me to shift-tab to display network boot option menu,at which point it is frozen ! Help please
Pete

Quote from: Fredrik Åsenius on 25-April-07, 01:09:49
It shuts down? Doesn't restart?
What is the difference in environment from the shop and your place?
Shutting down is normally - still - a sign of the processor turning itself off to protect itself. It's not alive long enough in BIOS, to make you see the temp?
I doubt you keep the computer in the cupboard, but it should anyway have about 50 cm free space in every direction (except downward of course).
Fredrik, The difference between home and shop, I keep the PC in a PC stand at ground level. I could improve its position slightly however, it has been sighted there for aroung eighteen months!  The shop guy didn't seem overly concerned by the 49c temp, (he thought the fan was ok) which increased to around 56c with 1.5gb ram installed. When i tried to get into bios I was probably too late hitting delete key has it went to windows scan! After the problems I'd had last week with my original hard drive I didn't want to take any more risk's! Its seems obvious the cpu temp is affected with the extra ram, any ideas?
Thanks Pete

Similar Messages

  • Problems installing OSX on a new hard drive

    My hard drive was dead/dying a few months ago and I hadn't touched it for awhile. I recently decided to take it to the apple store and see what I could do. The genius bar associate suggested I either take it to a third party repair company or replace it myself. I opted for the latter route and replaced it myself today.
    When I powered it on, I gott the chime and just a black screen. I tried booting from disc by holding C, but after making some abnormal noises, it spits the CD out. I have tried this with a copy of windows vista, and it doesn't make the weird noises or spit it out, but nothing happens as well.
    I'm not sure if it's my install disc, my cd drive, or if I went wrong somewhere replacing my hard drive. Any help would be appreciated.

    CD/DVD Loading Problems                        
    CD/DVD Drive - Troubleshooting See troubleshooting section.
    CD/DVD Drive - Troubleshooting (2)

  • How to install Windows 7 on new hard drive?

    I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
    1. How do I install Windows 7 on new hard drive?
    2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
    by the way this is my laptop spec (for reference) ; -
    * Note *
    I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
    I hope somebody will help me answer my question,
    Thank You
    Solved!
    Go to Solution.

    I got the solution;
    Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
    Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
    or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

  • How to install Mac OSX on New Hard Drive (No Disk)

    I have a new Hard Drive that I just received and I'm looking to install it on my Early 2009 17 inch Macbook Pro. The problem is I dont have the original disk that came with my macbook. I do have a 2TB external HD so is there anyway I can back up Maverick on there and install it on the new Hard Drive without having the original Disk?

    If your machine is running Mavericks with the old drive, just connect the new one in an external enclosure. Boot to the Recovery partition by holding the Command and R keys at startup. Run Disk Utility to prep the new drive, exit Disk Utility and install Mavericks.
    You could also do the external enclosure and use Carbon Copy Cloner to copy your existing drive to the new one.
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1395317179&sr=8-3&keywords=2.5+enclosure

  • How to install and reconfigure a new hard drive?

    How to install and reconfigure a new hard drive?
    I installed a new hard drive from best buy for my "vintage" MacBook laptop.  When I turned on the laptop and the flashing folder appeared, I need help?
    I looked online for some clues.  I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software.  I tired to partition the drive within disk utility but there was an input/output error.  Should I just plug in my external hard drive and hope everything reboots like magic ?
    Thank you for any help you can give

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID  then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

    i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

    If you're able to boot, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all.

  • Any ideas on how I install Lion on a new hard drive

    Any ideas on how I might install Lion on a new hard drive when I purchased the OS online from Apple prior to my hard drive failing?       I don't have a disk. 

    when you install your new drive, what happens? it should boot into internet recovery and you setup from there.
    does it not do that?
    here is an article about how to force internet recover http://www.cultofmac.com/106669/force-lion-to-start-internet-recovery-on-your-20 11-or-later-mac-os-x-tips/
    here is apple literature about the recovery partition (if you had a hard drive) http://www.apple.com/osx/recovery/
    here is a do it yourself downloader that makes a usb stick the recovery disk. If you have data on the usb drive I would back it up, as this will erase everything else on the thumb drive. http://support.apple.com/kb/DL1433

  • Installing Mavericks on a new hard drive...

    Hi
    My hard drive crashed, and I bought a new one today. They told me at best buy I need to download mavericks drivers onto a usb or something. I'm not really sure what they meant so I thought I would ask here. Where do I go to put Mavericks onto a usb to install it on a new hard drive?
    Thanks

    1. If it shipped with 10.7 or newer, you'll need to go through that OS by following the instructions above, and then install Mavericks in the normal way. If it shipped with 10.6.8 or earlier, reload that OS from DVD and then upgrade to Mavericks.
    2. The computer's firmware contains instructions for connecting to the Internet.
    (100250)

  • My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

    My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

    What does "the registration won't let me" mean? If the serial number is rejected, contact support by web chat. for anything else you need to provide proper technical information and actually explain your issue.
    Mylenium

  • MacBook Pro 2009 new hard drive install results in very slow function and freezing

    I just wanted to post my resolution to a problem that I had trouble finding an answer to on these forums.
    Short version:
    I replaced the hard drive in my 2009 MacBook Pro because the computer froze and upon reboot the Disk Utility said it was corrupted, but with the new hard drive the computer ran very slowly and often showed the spinning rainbow wheel. I replaced the SATA cable that connects the hard drive to the motherboard and it works perfectly once again.
    Long version:
    Recently my MacBook Pro (2009 running Snow Leopard) froze up and I performed a hard reset by holding down the power button. When I turned the computer back on it would not boot OS so I ran disk utility from the Snow Leopard install DVD. The test said the hard drive was corrupted, and since the computer is way past warranty I decided to change the drive out myself. I bought a 500GB Seagate Momentus 5400 Drive from Amazon, opened the computer and replaced the existing hard drive with the new one. When I first booted from the OS install DVD, my computer was not recognizing that any hard drive was present. I read somewhere on these forums that sometimes the formatting on new Seagate drives can't be read by MacBooks and they need to be reformatted using another computer, but I tried simply taking the hard drive out and putting it back in a couple of times thinking maybe I had just not plugged it in correctly. After the 4th attempt the hard drive magically showed up, and I was able to reformat the drive and install OS and even Windows XP on bootcamp.
    Everything seemed to be okay but applications were running slowly considering this was a fresh drive and OS install. Over time, the computer started to hang more and more. In OS I would get the spinning rainbow wheel even when doing something as simple as opening a browser window in Chrome or trying to type into a text field. When I tried to use Windows it would simply freeze after only a short time and I'd have to do a hard reset.
    I went to the Genius Bar at the Apple store which was unhelpful, so I continued searching through these forums to try to figure out the problem. I noticed a lot of people had trouble with the SATA cable that came with the computer because it's quite thin and delicate, and would get damaged when changing out the hard drive. However most of these people seemed to experience a question mark when starting up the computer, whereas mine would fully boot and be functional for a time. I thought it unlikely that a damaged cable could possibly leave the computer partially functional. Finally though I gave in a dropped the $26 for a new SATA cable on Amazon. As soon as I installed it the problem was fixed, and the computer runs as fast as when I first bought it. I don't know if I damaged the cable changing the hard drive (I was extremely careful) or if my original hard drive was not actually corrupted and the cable was already damaged. I mentioned the possibility of the cable being damaged at the Apple store and the representative said that often times they fail because people carry the laptop with one hand, and because of the way this model was designed this puts a lot of pressure right on that thin cable. Regardless, if you do plan on changing out your hard drive in your MacBook keep in mind that the SATA cable is sensitive, and that if you experience problems with a fresh hard drive and OS install the SATA cable is a likely culprit.

    If you think you have either a hard drive or a cable problem, to the best of my knowledge the only product that can help isolate both of them is Scannerz. You can check it out at:
    http://scsc-online.com/Scannerz.html
    I think that's the correct link. If it isn't and you're interested and that's wrong, just google it. I'd also check out their downloads section, especially the sort of short document on using path isolation to detect and isolate problems.
    Scannerz can detect both errors and irregularities. It uses the surface scan progress as a reference. Cable problems never show up at the same location because they're typically intermittent. Surface problems always show up at the exact same place. That's the only product (at least commercially available) that can do that.
    I don't know if this information is of any value to you because it sort of sounds like you've already solved the problem, but it might be of use if you have problems in the future.
    In any case, I've seen several posts on several different sites where people were reporting insulation break down on some of the SATA cables. Apparently the insulation breaks down and the cable starts shorting to the case.

  • How to install operating system on new hard drive without installation disc on macbook pro 2011

    My macbook pro 2011 does not come with a recovery disc or any disc at all, my hard drive recently failed and i have no backup. i have replaced the hard drive but don't know how to install the operating system on the new hard drive.

    If it originally shipped with 10.7 or newer, connect the computer to the Internet and start it up with the Option, Command, and R keys held down. You'll be able to install an OS.
    If it shipped with 10.6.8 or earlier and wasn't upgraded to use Apple's Internet Recovery system, phone AppleCare and order the disks.
    (109822)

  • My Mac Pro had new hard drive installed. I downloaded the latest iPhoto application. All my photos have been restored to a folder which I dragged to the iPhoto icon. The photos are not down loading.

    My Mac Pro had a new hard drive installed. Everything was restored by Carbonite except my photos. Carbonate restored them to a folder and the folder was dragged over the newly installed iPhoto app. The photos are not installing. What next?
    Ron Rushford

    What happens when you try File -> Add to Library?

  • Installing snow leopard on new hard drive - disc not seen or found

    I can't provide too many details right now as my hard drive is out, and I'm trying to reinstall an operating system.
    Problem:  Installed a new hard drive purchased from reputable repair store. Last installation disc I have is OS X Snow Leopard. When I get to the point to choose where to install it, it is not seeing the new hard drive.  I've double checked that the wires/bar connecting the actual hard drive are snug. Could there be another problem? Something to do with Lion? I've read several forums, but to no avail....
    Computer:  Macbook Pro unibody. Probably mid 2009.
    OS X: The last one before Maverick... 10.8.5
    The reason I am putting in a new hard drive is that my computer was having trouble starting up or unexpectedly crashing, although I could do a Safe start or Diagnostic (d).  So, on the old hard drive, I did PRAM reset, and Disk Utility, but could not run the Apple Hardware Test, so I took it in.  There is a little issue with battery not being full, but they did not think that was causing the problem, and that it was probably a hard drive issue.  With the new harddrive... they suggested trying to download an OS from linking to another computer by firewire.... The other computer, (Macbook 2 GHx intel Core 2 Duo, 4 GB 10067 MHZ DDR3, OS 10.8.5) does not have a firewire, but does have thunderport, so I tried doing a Target start to reboot...  but Macbook Pro did not read the 2nd computer (Macbook). Then I found my old Snow Leopard disk and here I am...

    If the repair store installed the drive, I'd take it back and let them make it work. Take your Snow Leopard DVD also.

  • Trying to install OS X to new hard drive but broken optical drive

    I replaced my macbook pro hard drive with a new one but can't install OS X onto the new hard drive because my optical drive doesn't work. I have an external optical drive that I can connect to my macbook pro but the OS X install DVD won't run.
    I have settled for now to putting back my old hard drive into my macbook pro and have been trying to figure out a solution to my problem by looking around and the only possible solution I could find was replacing the optical drive itself which as much as possible, I am trying to avoid as my macbook pro is past 3 years old (approaching 4).

    Will it work even though the hard drive itself is blank and I am trying to install OS X into the blank hard drive that I put inside my macbook pro? I thought by start up it meant that OS X was already installed on the hard drive. I hope that made sense.
    Thank you though. I'll try it out and post what happened.
    Sorry. I'm not really that literate technologically speaking or with configuring macbook pro settings. I'm just really trying things I've been searching and going along with what I can find.

  • I purchased mountain lion from apple but never got a disk. How do I install it on my new hard drive, old hard drive failed and is not recoverable according to Apple and Recovery Specialist?

    I have a mid 2009 MacBook Pro with newly installed SATA HD + SSD, I can get mavericks download free but I can't recover photos, apps, files etc from time machine (1TB Time Capsule), I think I was running lion when I started backing up on it but I had updated to mavericks before the HD Failure. When I tried to transfer info from Time Capsule it says " no volumes detected" or something to that effect. I had mucho info backed up on that capsule. Any help appreciated, please spell it all out for me if you can help, I am not at all tech savvy and desperate to get up and going as I am an online student with a fast approaching deadline for course paper. Thank you in advance :)

    Step 1: Buy a new Hard drive that can be installed in your MacBook Pro later, and an External enclose to place it in for now.
    The MacBook Pro before 2010 can not contain the stand-alone firmware to go to the Internet and get a fresh copy of Mac OS X and install it.
    You will need a working Recovery_HD, or to drop back to a 10.6 DVD (if it will Boot on your Mac).
    There may be a functioning Recovery_HD on your existing Boot Drive. If you were running 10.7.4 or later and Time Machine, there may be a Recovery_HD on the Time Machine Volume.
    To check:
    Hold down the Alt/Option key as you restart. This will slowly draw a gray screen and then add an Icon (over several minutes) for each potentially-bootable volume. If any Recovery_HD shows up, take it, and you will be able to get to Internet Recovery and re-download some version of Mac OS X that can be installed on a new drive.
    It is generally far quicker to set up a new drive and install Mac OS X than to struggle with only the primitive tools available only on a DVD or a Recovery_HD. Once you get any version of Mac OS X running, you can get some work done and attempt to salvage first your data, then your drive (if either will be possible).
    By NOT trying to Boot from and use the possibly-damaged drive, you improve your chances of being able to salvage some files off it, since blocks will not be over-written by running Mac OS X from it.

Maybe you are looking for