Problem is transporting Smart forms---------Urgent

Hello Guys,
I have make some small change in smart forms. That change are reflecting in quality ckient and working OK.
But when I am transporting the same in prod. server.the changes are not reflecting . Wehre is the problem. I have check properly no issue like Actvitation and saving.
I have save and actvitated the form properly after that only transported in 400.
please reply urgent .
Regards
Swati Namdeo

Hi,
Check the changes made in smartform by checking the tr rquest and also confirm the server name after the release of the request from quality
Contact your basis guy for more information
regards
Shiva

Similar Messages

  • Problem in converting smart form into PDF

    HI Experts,
                      I am using a Function Module CONVERT_OTF for converting smart form into pdf file for send it to with attachment.
    But i got a error when i am using that FM.
    Runtime Errors         CONVT_NO_NUMBER
    unable to interpret *292 as a no.
    Is that because my file size too large about 13 pages of PDF?
    and when i run it for other smart forms which have 2 or 3 pages of PDF, its working perfectly.
    can anyone tell what is problem with that FM?
    Thanks
    Shakun

    Hi,
    I had the similar issue and after analysis I have that this is the issue by not passing the IMPORTING parameter of the Function Module "BIN_FILESIZE". Please try to pass some variable to this paramter and then this will be completely rectified.
    DATA ; v_filesize     TYPE i.
    *--Convert OTF data to PDF data
      CALL FUNCTION 'CONVERT_OTF'
        EXPORTING
          format                = 'PDF'
          max_linewidth         = 132
        IMPORTING
          bin_filesize          = v_filesize
        TABLES
          otf                   = it_otfdata
          lines                 = it_pdfdata
        EXCEPTIONS
          err_max_linewidth     = 1
          err_format            = 2
          err_conv_not_possible = 3
          err_bad_otf           = 4
          OTHERS                = 5.
    Please verify whether this reolves the problem for you.
    Regards,
    SRinivas

  • Transporting Smart forms

    Hello,
    I would like to know if there is any special procedure to transport a samrt form?
    I know that with other ABAP objects if they are listed under the transport number
    it will get transported. I would like to know if there is any difference with smart forms other than this.
    thank you,
    Amar

    There is no difference when transporting Smartforms.
    Just be sure that you include any Smartstyles with your transport.
    Also, the first time the Smartform is issued, the FM will be generated in the new system, so you may want to go to the new system, goto Smartforms and Generate the FM.

  • HELP-i want to print price details in SMART FORMS-urgent

    hi friends,
        I want to print price details of sales order in every page of my <b>smart forms</b> using FM <b>RV_PRICE_PRINT_ITEM</b> .
    Can anyone help me how to use that function and how to pass value to the parameter
    all your answers are appreciatable .
    thanks in advance
    shan
    Message was edited by: Shan

    hi santhosh ,
      this is how my program look ,but i dnt know how values can be pass to this internal table as the table TKOMV and
    TKOMVD in FM are of structure type .
      DATA: IT_KOMV LIKE TABLE OF KOMV,
      WA_KOMV LIKE LINE OF IT_KOMV.
    DATA: IT_KOMVD LIKE TABLE OF KOMVD,
    WA_KOMVD LIKE LINE OF IT_KOMVD.
    select *
    into table IT_KOMVD
    from komvd up to 10 rows.
    CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
      EXPORTING
        COMM_HEAD_I       = WA_KOMV
        COMM_ITEM_I       = WA_KOMVD
      LANGUAGE          = ' '
    IMPORTING
      COMM_HEAD_E       =
      COMM_ITEM_E       =
      TABLES
        TKOMV             = IT_KOMV
        TKOMVD            =  IT_KOMVD .
    LOOP AT IT_KOMV INTO WA_KOMV.
    WRITE: / 'TAX' , WA_KOMV-TXJLV.
    "WRITE: / WA_KOMV-matnr.
    ENDLOOP.
    LOOP AT IT_KOMVD INTO WA_KOMVD.
    WRITE: / 'DISCOUNT' , WA_KOMVD-NRMNG.
    WRITE: / 'KNTYP', WA_KOMVD-KNTYP.
    ENDLOOP.
    pls help in this issue.
      thanks ,
      shan(SAP beginner)

  • Smart forms urgent

    Hi friends,
         I have very urgent issue ie, i want to get the delivory date of the purchase order delivery date in the table.  ie in the table in program lines node i am using the code as " select single eindt
    from eket
    into zdeldate
    where ebeln = l_xekpo-ebeln and
    ebelp = l_xekpo-ebelp."
    but it is not displaying the delivery date.
    plese help its urgent.
    thanks in advance
    desha.

    Check EBAN-LFDAT
    Close the thread if your question is answered.
    Regards,
    Sairam

  • Smart form (URGENT)

    Hi
    I am working on RFQ smartform and using standard print program /smb40/fn06p.
    i need the explaination of form ENTRY_NEU and perform PROCESSING_PO inside the include /SMB40/FM06PE02 .I want to know what actually both of these are used for.
    plz anyone help me asap.
    regards
    vijay

    hi,
    try to use control break statements for ur requirement.
    try like this,
    create a internal table[with header line]  with fields SNo PO mat Qty and while u display o/p
    data: flag type c .
    LOOP AT itab.
              AT NEW SNO.
               write: 20 itab-mat,
                        30 itab-qty.
               flag  = 'X'.
               ENDAT.
           if flag NE 'X'.
                 write:/10 itab-sno,
                          20 itab-mat,
                           30 itab-aty.
          endif.
    Append itab.
    CLEAR itab.
    ENDLOOP.
    If helpful reward some points.
    With regards,
    Suresh Aluri.

  • Regarding smart forms urgent

    Hi,
    How to convert HTML output to pdf? that is in my smartform I am converting output to HTML First and after that i want to convert to PDF. Right now I am using fm CONVERT_OTF_2_PDF to convert otf to pdf but I want to convert HTML to pdf.
    Regards,
    shravan

    Hi
    check out on this link this will help
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a9f3e590-0201-0010-4da9-c195623f88c3">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a9f3e590-0201-0010-4da9-c195623f88c3</a>
    Hope that Helps
    Anirban M.

  • Omiting sign in smart form-urgent will reward

    Hi frnds,
       i have tried some ways like &symbol(S)& to omit the sign in my total 1200.00- but i couldnt. tell how to display just only 1200.00

    Have that value converted to a positive value in the print program itself.
    if total < 0.
    total = -1 * total.
    endif.
    Or do that in the script itself.
    &total& = -1 * &total&.
    Regards,
    ravi

  • Regarding smart forms (really urgent)

    hi,
    i am new to smartforms and i got report to make changes in the smart forms,plzz help me out as i know nothing about the smart forms by providing me it in easiest & simplest form.
    if find useful help will be deifnately rewarded.
    Edited by: ric .s on Mar 6, 2008 5:16 AM

    Hi,
    This Smartform Information I read, really helped me out.
    I think it would be of some good help to you too..
    What is SAP Smart Forms?
    SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms. 
    SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can  configure forms with data from an SAP System for the relevant business processes.
    To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
    You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
    You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
    SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
    SAP Smart Forms also support postage optimizing.
    Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
    What Transaction to start SAP Smart Forms?
    Execute transaction SMARTFORMS to start SAP Smart Forms.
    Key Benefits of SAP Smart Forms:
    SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time. 
    You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
    To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
    These actions do not include writing of coding lines or using a Script language.
    Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one. 
    For Web publishing, the system provides a generated XML output of the processed form.
    Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
    Advantages of SAP Smart Forms
    1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
    2. Displaying table structures (dynamic framing of texts)
    3. Output of background graphics, for form design in particular the use of templates which were scanned.
    4. Colored output of texts
    5. User-friendly and integrated Form Painter for the graphical design of forms
    6. Graphical Table Painter for drawing tables
    7. Reusing Font and paragraph formats in forms (Smart Styles)
    8. Data interface in XML format (XML for Smart Forms, in short XSF)
    9. Form translation is supported by standard translation tools
    10. Flexible reuse of text modules
    11. HTML output of forms (Basis release 6.10)
    12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
    A Simple Smartform Tutorial 
    SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output). 
    According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions). 
    1. Create a new smartforms
    Transaction code SMARTFORMS
    Create new smartforms call ZSMART
    2. Define looping process for internal table 
              Pages and windows
    •     First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
    Here, you can specify your title and page numbering
    &SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page) 
    •     Main windows -> TABLE -> DATA
    •     In the Loop section, tick Internal table and fill in
    •     ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
    3. Define table in smartforms
               Global settings :
               Form interface
               Variable name    Type assignment   Reference type
               ITAB1               TYPE                  Table Structure
               Global definitions
               Variable name    Type assignment   Reference type
               ITAB2               TYPE                  Table Structure 
    4. To display the data in the form 
        Make used of the Table Painter and declare the Line Type in Tabstrips Table
         e.g.  HD_GEN for printing header details,
                 IT_GEN  for printing data details. 
         You have to specify the Line Type in your Text elements in the Tabstrips Output options.
          Tick the New Line and specify the Line Type for outputting the data.
          Declare your output fields in Text elements 
          Tabstrips - Output Options
          For different fonts use this Style : IDWTCERTSTYLE
          For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
    5. Calling SMARTFORMS from your ABAP program 
    REPORT ZSMARTFORM. 
    Calling SMARTFORMS from your ABAP program.
    Collecting all the table data in your program, and pass once to SMARTFORMS
    SMARTFORMS
    Declare your table type in :-
    Global Settings -> Form Interface
    Global Definintions -> Global Data
    Main Window -> Table -> DATA
    Written by :  SAP Hints and Tips on Configuration and ABAP/4 Programming
                        http://sapr3.tripod.com
    TABLES: MKPF. 
    DATA: FM_NAME TYPE RS38L_FNAM. 
    DATA: BEGIN OF INT_MKPF OCCURS 0.
            INCLUDE STRUCTURE MKPF.
    DATA: END OF INT_MKPF. 
    SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001. 
    SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
       MOVE-CORRESPONDING MKPF TO INT_MKPF.
       APPEND INT_MKPF. 
    ENDSELECT. 
    At the end of your program.
    Passing data to SMARTFORMS 
    call function 'SSF_FUNCTION_MODULE_NAME'
      exporting
        formname                 = 'ZSMARTFORM'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
      IMPORTING
        FM_NAME                  = FM_NAME
      EXCEPTIONS
        NO_FORM                  = 1
        NO_FUNCTION_MODULE       = 2
        OTHERS                   = 3. 
    if sy-subrc <> 0.
       WRITE: / 'ERROR 1'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif. 
    call function FM_NAME
    EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
      TABLES
        GS_MKPF                    = INT_MKPF
      EXCEPTIONS
        FORMATTING_ERROR           = 1
        INTERNAL_ERROR             = 2
        SEND_ERROR                 = 3
        USER_CANCELED              = 4
        OTHERS                     = 5. 
    if sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    Additional Fonts for your SMARTFORMS 
    You can create additional fonts and style with transaction SMARTSTYLES
    This can then be define in the paragraph and character formats, which you can then be assign to texts and fields in the Smart Form. 
    The character formats includes effects such as superscript, subscript, barcode and font attributes.
    Difference with SMARTFORMS vs. SapScript(SE71)
    The Following are the differences :-
    a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
    b) It is possible to have a smartform without a main window .
    c) Labels cannot be created in smartforms.
    d) Routines can be written in smartforms tool.
    e) Smartforms generates a function module when activated.
    f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk. 
    It was said that it was provided in CRM 3.0 version, but not available in R/3.  You can download smartforms into Local PC in a XML format.  In the same way you can upload this XML format into Smartform.  From the smartform editor itself you can call download option, if you are working in CRM 3.0 environment. 
    In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
    In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk. 
    For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people.  What you can do is to create a Transport and then FTP down to your local harddisk.   When you need the Smartform source in another system, you have FTP up the Smartforms file back to the SAP server.  Finally, the Basis team, will tp it into your system.
    g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it.  Actually, there is something you can do about it.  By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
    FAQ on Migrating SAPscript to SmartForms
    Is it possible to migrate a SAPscript form to a Smart Form? 
    Smart Forms provides a migration tool for this purpose which migrates layout and texts of a SAPscript form to a Smart Form. It does not migrate SAPscript form logic of the print program. Using Smart Forms, this logic is described by the tree structure of the Form Builder. The effort involved in migrating it depends on the complexity of the print program. 
    Which Basis Release do I need to use SAP Smart Forms? 
    SAP Smart Forms is available as of R/3 Basis Release 4.6C. 
    I have heard that Smart Forms replaces SAPscript. What does "replace" mean? 
    It does not mean that SAPscript is removed from the Basis shipment. Even as of Basis Release 4.6C, SAPscript remains part of the SAP standard and there are no plans to remove it. Since Smart Forms is currently, and will continue to be, the tool for form maintenance for mySAP.com solutions, our further development efforts will focus on Smart Forms, not on SAPscript.
    Do we have to migrate all SAPscript forms to Smart Forms? 
    There is no point in migrating all SAPscript forms already in use. Since SAPscript can still be used and will be available in the future, there is no need to. If you plan to migrate a SAPscript form, it is recommended that you check whether benefit is worth the effort involved
    Conversion of SAPSCRIPT to SMARTFORMS
    SAP provides a conversion for SAPscript documents to SMARTforms.
    This is basically a function module, called FB_MIGRATE_FORM. You can  start this function module by hand (via SE37), or create a small ABAP which migrates all SAPscript forms automatically.
    You can also do this one-by-one in transaction SMARTFORMS, under 
    Utilities -> Migrate SAPscript form.
    You could also write a small batch program calling transaction SMARTFORMS and running the migration tool.
    SmartForms System Fields
    Within a form you can use the field string SFSY with its system fields. During form processing  the system replaces these fields with the corresponding values. The field values come from the  SAP System or are results of the processing.
    System fields of Smart Forms
    &SFSY-DATE& 
    Displays the date. You determine the display format in the user master record.
    &SFSY-TIME& 
    Displays the time of day in the form HH:MM:SS.
    &SFSY-PAGE& 
    Inserts the number of the current print page into the text. You determine the  format of the page number (for example, Arabic, numeric) in the page node. 
    &SFSY-FORMPAGES& 
    Displays the total number of pages for the currently processed form. This  allows you to include texts such as'Page x of y' into your output. 
    &SFSY-JOBPAGES& 
    Contains the total page number of all forms in the currently processed print  request. 
    &SFSY-WINDOWNAME& 
    Contains the name of the current window (string in the Window field)
    &SFSY-PAGENAME& 
    Contains the name of the current page (string in the Page field)
    &SFSY-PAGEBREAK& 
    Is set to 'X' after a page break (either automatic [Page 7] or  command-controlled [Page 46])
    &SFSY-MAINEND& 
    Is set as soon as processing of the main window on the current page ends
    &SFSY-EXCEPTION&
    Contains the name of the raised exception. You must trigger your own  exceptions, which you defined in the form interface, using the user_exception macro (syntax:  user_exception <exception name >).
    Example Forms Available in Standard SAP R/3
    SF_EXAMPLE_01 
    Simple example; invoice with table output of flight booking for one customer
    SF_EXAMPLE_02 
    Similar to SF_EXAMPLE_01 but with subtotals
    SF_EXAMPLE_03 
    Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the  form is called for each customer and all form outputs are included in an output request
    Smart forms Frequently Asked Questions
    Forcing a page break within table loop
    Create a loop around the table. Put a Command node before the table in the loop that forces a NEWPAGE on whatever condition you want. Then only loop through a subset of the internal table (based on the conditions in the Command node) of the elements in the Table node. 
    Font style and Font size
    Goto Transaction SMARTSTYLES. 
    There you can create Paragraph formats etc just like in sapscript. 
    Then in your window under OUTPUT OPTIONS you include this SMARTSTYLE and use the Paragraph and character formats. 
    Line in Smartform
    Either you can use a window that takes up the width of your page and only has a height of 1 mm. 
    Then you put a frame around it (in window output options). 
    Thus you have drawn a box but it looks like a line. 
    Or you can just draw "__" accross the page and play with the fonts so that it joins each UNDER_SCORE. 
    Difference between 'forminterface' and 'global definitions' in global settings of smart forms
    The Difference is as follows. 
    To put it very simply: 
    Form Interface is where you declare what must be passed in and out of the smartform (in from the print program to the smartform and out from the smartform to the print program). 
    Global defs. is where you declare data to be used within the smartform on a global scope. 
    ie: anything you declare here can be used in any other node in the form. 
    Smartforms function module name 
    Once you have activated the smartform, go to the environment -> function module name. There you can get the name of funtion module name. 
    The key thing is the program that calls it. for instance, the invoice SMARTFORM LB_BIL_INVOICE is ran by the program RLB_INVOICE. 
    This program uses another FM to determine the name of the FM to use itself. The key thing is that when it calls this FM (using a variable to store the actual name), that the parameters match the paramters in your smartform.
    Another thing to note is that the FM name will change wherever the SF is transported to. 
    So you need to use the FM to determine the name of the SF. 
    Here is the code that can be use to determine the internal name of the function module: 
    Code: 
        if sf_label(1) <> '/'.    " need to resolve by name 
          move sf_label to externalname. 
          call function 'SSF_FUNCTION_MODULE_NAME' 
               exporting 
                    formname           = externalname 
               importing 
                    fm_name            = internalname 
               exceptions 
                    no_form            = 1 
                    no_function_module = 2 
                    others             = 3. 
          if sy-subrc <> 0. 
            message 'e427'. 
          endif. 
          move internalname to sf_label. 
        endif. 
    It checks to see if the sf_label starts with a '/', which is how the internal names start. if it does, the name has already been converted. If not, it calls the FM and converts the name. 
    You would then CALL FUNCTION sf_label.
    Smartforms FAQ Part Two
    Smartforms output difference
    Problem with Smartforms: in a certain form for two differently configured printers, there seem to be a difference in the output of characters per inch (the distance between characters which gives a layout problem - text in two lines instead of one.                                      It happens when the two printers having different Printer Controls' if you go to SPAD Menu (Spool Administrator Menu) you can see the difference in the Printer Control and if you make the Printer control setting for both the printers as same. then it will be ok. and also u have to check what is the device type used for both the output devices. 
      SmartForms Output to PDF
    There is a way to download smartform in PDF format.
    Please do the following:
    1. Print the smartform to the spool.
    2. Note the spool number.
    3. Download a PDF file (Acrobat Reader) version of the spool by running Program RSTXPDFT4 and entering the noted spool number.
      SmartForm Doublesided printing question  Your customer wants your PO SmartForm to be able to print "Terms and Conditinos" on the back side of each page. They don't want to purchase pre-printed forms with the company's logo on the front and terms & conditions on the back. Now this presents an interesting problem. 
    Has anyone else ever had a request like this? If for example there was a 3 page PO to be printed,  they want 3 pieces of paper, the front side of each to containe the PO information (page 1, 2, and 3) and the back side of each piece of paper to containg the static "Terms & Conditions" information. 
    Anyone have a clue how to force this out? 
    Easy - page FRONT lists page CONTACTS as next page and CONTACTS lists FRONT as next page. Since CONTACTS does not contain a MAIN window, it will print the contacts info and then continue on to FRONT for the rest of the main items. Additionally, set print mode on FRONT to D (duplex) and set CONTACTS to 'blank' (for both resource name and print mode - this is the only way to get to the back of the page). 
      Transport Smart Forms
    How does one transport SMARTFORM? SE01?  
    How do you make sure that both, the SMARTFORM & it's function module gets transported? Or does the FM with same name gets generated automatically in the transported client? 
    A smartform is transported no differently than any other object. if it is assigned to a development class that is atteched to a transport layer, it will be transported. 
    The definition is transported, and when called, the function module is regenerated. 
    This leads to an interetsing situation. On the new machine, it is very likely the function module name will be different than the name on the source system. Make sure, before you call the function module, you resolve the external name to the internal name using the 'SSF_FUNCTION_MODULE_NAME' function module. 
    Typically, generate the SF, then use the pattern to being in the interface. Then change the call function to use the name you get back from the above function module. 
      Smartforms: protect lines in main window.
    How to protect lines in the main window from splitting between pages? 
    It was easy with SAPscript, but how to do it with SF's.   For 4.7 version if you are using tables, there are two options for protection against line break: 
    - You can protect a line type against page break.
    - You can protect several table lines against page break for output in the main area.
    Protection against page break for line types 
    - Double-click on your table node and choose the Table tab page. 
    - Switch to the detail view by choosing the Details pushbutton. 
    - Set the Protection against page break checkbox in the table for the relevant line type.  Table lines that use this line type are output on one page. 
    Protection against page break for several table lines 
    - Expand the main area of your table node in the navigation tree. 
    - Insert a file node for the table lines to be protected in the main area. 
    - If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file. 
    - Choose the Output Options tab page of the file node and set the Page Protection option.   All table lines that are in the file with the Page Protection option set are output on one page. 
    Regards,
    Rohini.

  • A strange problem in smart form?

    Hi,
       I met a strange problem in my smart form. When I click "Check" button in each window of each page, system said "Window (my window name) does not fit onto page(height)". Even I create a new page and a new window in it, it still said this error when I click "Check" button in the new window.
       I have tried to enlarge or reduce the window's size, but this error still occured. But I can activate the form correctly. And there is a syntax error in the generated program:
       FORM %EV2.
        LOOP AT INTO .
        CALL FUNCTION 'SSFCOMP_TABLE_ROW_BEGIN'
        EXPORTING I_LINE_TYPE = 'LINE2'
      You can see there's an error in loop statement.
      Could you tell me the reason and how to solve it?
      Thanks a lot!

    hi
    good
    as you have maneioned in your error  you have said that you have created your own window,but the check box as you mentioned which check box that it it is output options tab check box or in the condition tab check box.
    in the general attribute select the secondary window from the dropdown box and output options tab select the page size as you need .
    i hope you will get some output .
    thanks
    mrutyun

  • Problem with Smart Form ('RLE_DELNOTE')--Please Help

    Hello,
    I am facing a problem in the smart form.
    So far I am printing certificates (QM module) for the finished goods.  i.e. first level batches.  Now I should incorporate down level batches info also. i.e. semi finished goods info (second, third... level batches).  I am not aware of how to find out the semi finished goods info of a finished good.  Each finished good may have one or two levels of semi finished goods....The print program i am using is 'RLE_DELNOTE'.
    Can any body suggest me what i have to do?
    I have tried with FM 'CHVW_BATCH_WHERE_USED_LIST'.  But is of no use.....please tell me...
    Best Regards,
    Shekhar

    To check to see if you have an OpenGL problem:
    In Photoshop choose Edit - Preferences - Performance.
    Is [ ] Use OpenGL Drawing checked?
    If so, uncheck it.
    Close and restart Photoshop.
    Does the problem persist?
    If so, you probably can correct it with a video driver update.
    Don't forget to go back and re-enable Use OpenGL Drawing.
    To update your video driver:
    Right-click on your desktop and choose Screen Resolution.
    In the dialog that comes up, choose Advanced settings.
    Click the Adapter tab, if it isn't already current.
    What Adapter Type is listed?  Note the brand and model.
    If it is an ATI model, visit this web site:
    http://support.amd.com/us/Pages/AMDSupportHub.aspx
    If it is a nVidia model, visit this web site:
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    Follow the instructions to choose the proper card and operating system.
    Download and install the latest drivers for your hardware.
    -Noel

  • Problem with smart forms.......

    Hi friends, I m facing a strange problem while using smart form. I am using values from standard smartform for invoice n just modifying the layout. The problem is tht,the value i m getting is like '14.223,56' bt the actual value that i want should be  '14,223.56'. That is the '.' and ',' are interchanged. Please tell me some way by which i can make it right.
    Good points will surely be awarded for answers.
    Thanks..........

    Have you checked your user defaults in transaction SU01
    under the defaults tab there is a section for decimal notation.

  • Smart form problem with multiple pages & table problem

    Hi experts,
    I have a problem with my smart form with multiple pages
    Situation: I have a smart form that ALWAYS has at least 2 pages. In one page the quotation, in the second page (basically this is the 3rd page as the 2nd page is optional) the terms and conditions. Sometimes however, when there are many items in the quotation more than 1 page is needed for the quotation.
    The (optional) second page of a quotation has a different header than the first page of a quotation. So I made a second page with 2 secondary windows (where the header texts are in). The main window is after the secondary windows and has to finish the quotation.
    The problem is that my headers of the second page are never printed, it stays a blank space. The table however does continue and is printed.
    Another problem I have is that I have a table (with the quotations) with 6 columns. The first 2 columns are displayed correctly but once the 3rd column the columns are shown on a lign below.
    Regards,
    PJ

    I would suggest another approach to this problem.
    Use just one page. For the headers on the first page, use a secondary window and on the conditions tab, choose the additional event - Only on First Page.
    For the different header on the second page, create another secondary window on the same page (probably even overlapping the first header on your layout). But in this one, on the conditions tab, choose the additional event - Not on First Page.
    The table should flow as you would be using the Main window for this one.
    As for columns, if they are too wide and wont fit in the same line, it would move to the next line. So you would have to re-adjust the line width and test.
    Hope this resolves your problem.
    Regards,
    Ancy
    Edited by: abapfreak on Oct 4, 2010 11:52 AM

  • Smart form-table header-box

    Moved to correct forum by moderator
    Hello All,
    in my smartform iam displaying the data by looping a table. i ahve put a header inside loop.
    and for each new sales order , ia m going explicitly to new page, and when more number of items are there, that can fit in one page, then the smartform implicitly going to new page.
    my problem is, when smart form implicitly going to new page, the MAIN WINDOW is not called, so my header is not displayed. iam displaying this header using a template.
    the other windows, like date etc...are displayed, even if it goes to new page implicitly.
    is there any way i can show the header (in template), in page that called implicitely.
    Thanks in advance
    Best Regards,
    Amarender Reddy B
    Edited by: Matt on Dec 17, 2008 9:59 AM

    >
    Amarender Reddy Busireddy wrote:
    > Hello chenna
    > thanks for your answer
    > can you let em know, how to check that, i am getting that check box in display mode, even if enter the smart form in change mode.
    >   i tried many ways but i could not make that check box editable
    Thats because your table is not in the MAIN window I suppose. Keep your table in the MAIN window of the smartform and then Chenna's solution would work fine.
    Vishwa.

  • How to transport samrt form

    Hello guys,
    Please help me on below issue...
    I have developed one smart form in sandbox i want to transport it into the development server. Please let me know the possible ways.
    immediate solution will be apreceiated
    thanks for your time adn cooperation

    SAP SMART FORMS AND SMART STYLES ARE STAND-ALONE DEVELOPMENT OBJECTS. THIS MEANS THAT FOR EVERY SMART FORM AND FOR EVERY SMART STYLE A TADIR ENTRY IS CREATED. THE CORRESPONDING TRANSPORT OBJECTS ARE CALLED
    •     SSFO FOR SMART FORMS (R3TR SSFO NAME)
    •     SSST FOR SMART STYLES (R3TR SSST NAME)
    MIGRATING SAPSCRIPT FORMS
    •     UTILITIES -> MIGRATE SAPSCRIPT FORM.
    •     FOR MASS MIGRATION, SF_MIGRATE.    
    MIGRATING SMARTFORMS
    CHOOSE UTILITIES ® MIGRATION ® PDF-BASED FORM ® EXPORT.
    TRANSPORTING SMART FORMS
    A SMARTFORM IS TRANSPORTED NO DIFFERENTLY THAN ANY OTHER OBJECT. IF IT IS ASSIGNED TO A DEVELOPMENT CLASS THAT IS ATTACHED TO A TRANSPORT LAYER, IT WILL BE TRANSPORTED. THE DEFINITION IS TRANSPORTED, AND WHEN CALLED, THE FUNCTION MODULE IS
    REGENERATED. THIS LEADS TO AN INTERETSING SITUATION. ON THE NEW MACHINE, IT IS VERY LIKELY THE FUNCTION MODULE NAME WILL BE DIFFERENT THAN THE NAME ON THE SOURCE SYSTEM. MAKE SURE, BEFORE YOU CALL THE FUNCTION MODULE, YOU RESOLVE THE EXTERNAL NAME TO THE INTERNAL NAME USING THE 'SSF_FUNCTION_MODULE_NAME'
    FUNCTION MODULE. TYPICALLY, GENERATE THE SF, AND THEN USE THE PATTERN TO BEING IN THE INTERFACE. THEN CHANGE THE CALL FUNCTION TO USE THE NAME YOU GET BACK FROM THE ABOVE FUNCTION MODULE.
    Please reward points if useful.

Maybe you are looking for