Problem Load Balancing connections for Grid Control Console on port 80!

I have two OMS and I'm balancing connections for Grid Control Console using a Software Load Balancer according with "Oracle Enterprise Manager Advanced Configuration". I have success where the load balancer is listening on port different to 80. When I configure Load Balancer to listen on port 80(architecture requirement) and distribute load between the two OMS(Port 7779), when login to Enterprise Manager Console the URL on the web browser changes to the port configured for HTTP server (port 7780) wich produces an "unable to connect" error message; and this behaviour also happends in some of the internal links of Grid Control Console too. Any ideas?
Thanks in advance!
Message was edited by:
user463224

I got it working, changing the "Port" directive to 80 on httpd.conf on HTTP Server

Similar Messages

EM10g Problem connect to Grid Control

Hello,
I have installed EM10g Grid Control on Solaris 9. After the installation I can connect http://test:1810 der Application Server. I can connect http://test:7777 the welcome site. But if i try to connect to grid control http://test:7777/em I always get the message from the browser "server not found" cannot display site. Anyone an idea?
Regards
Alexander TÃ¼rk

Try to use 4889 instead of the 7777, if that does work, it could be your webcache which is not running.
You can also try to use the URL without /em, this should get you to the Application Server homepage.

A possible bug for Grid control?

Hi, Dear all,
We installed Grid control 10.2.0.1 on Redhat Linux R3 with existing database(10.2.0.4).
During the installation, we succeeded for repository creating but failed at OMS Configuration.
When I start oms in cmd line, I got the following error: the repository database can not be connected.
The description for the environment:
1. OMS server and repository database are installed on the same server, on which HA is used.
2. There are two floating IP on this machine,
IP | server name | used for |
xx.xx.xx.124 | cnsz030318 | oms server |
xx.xx.xx.80 | oem.db.paci.com.cn | repository database |
3.When we installed the oms with OUI, the repository server we input is oem.db.paci.com.cn
The problem we found:
During the installation, the repository was created successfully. But it failed at OMS configuration.
The error we got: the repository database can not be connected.
there are two lines in emoms.properities which seems strange:
oracle.sysman.eml.mntr.emdRepServer=oem.db.paic.com.cn
oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=cnsz030318.db.paic.com.cn)(PORT\=1535)))(CONNECT_DATA\=(SID\=oem10g)))
The emdRepServer is what we have input on OUI:oem.db.paic.com.cn. But for the connectDescriptor, it is changed to "cnsz030318.db.paic.com.cn", which does not exist at all!.
Now, we have worked around this problem by adding "cnsz030318.db.paic.com.cn" in the /etc/hosts.
But my question is, why the connectDescriptor set the HOST\ as cnsz030318.db.paic.com.cn? Why does it not use the name we input in OUI (oem.db.paic.com.cn)?
Maybe it is a bug for Grid control?

Did you install with "Use existing database" or "Use new database"?
I recommend that you use fully qualified domain names only!
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 7, 2009 2:24 PM

Load balancing algorithm for groups in RZ12

Hello,
I would like to know the load balancing algorithm for groups defined in RZ12.
I know that log on groups for external connections are administered via SMLG and table RZLLICLASS.
I also know that RFC resources can be managed for RFC logon groups via RZ12.
Kind regards,
Peter
<removed_by_moderator>
Point awarding is at your discretion, but read and follow the "Rules of Engagement"
Edited by: Juan Reyes on Dec 3, 2010 10:21 AM

Hello!
Found this post while searching information about RFC and Logon Groups...
I have some mess in my head with SMLG functionality and RZ12. As I know SMLG we can use to distribute users to application server instances, it gives us good achievement in performance. With RZ12 we can distribute RFC connection of particular job for parallel execution on predefined application server. With SMQS and SMQR transaction we can set "Name of AS Group" to route RFC-execution on certain server or servers. But I have troubles with understanding. Imagine, we set up group 1 with 2 servers (name it RFC_GR1), and group 2 with another 2 servers (name it RFC_GR2). How could qRFC scheduler decide on which RFC server group (RFC_GR1 or RFC_GR2) distribute RFC-execution? How to interact "Name of AS Group" with RFC groups if we can set only one group? How could we distribute RFC-execution depending on our logon groups (smlg)? We would like to distribute RFC depending on SAP logon groups. Is it possible? Or do I compare apple and orange?
Regards,
Artem Ivashkin

LOAD BALANCE BEHAVIOR FOR 7600 ON ETHERCHANNELS

Hi Everyone,
Currently I'm planning to implement ether-channels on 7600 routers, but there's something that's still not clear to me, regarding the load balancing behavior, for L2VPN and L3VPN.
I've read that 7600 in MPLS default load balance behavior is to take the SIP and DIP if present and the bottom of the stack label or the 5th label depending upon the number of labels on the stack. In l2VPN scenarios when ether-channel is used, if no IP traffic is present what is the default behavior of the etherchannel to calculate the load balancing hash function to select a given link on the bundle.
I'll appreciate any feedback regarding this.

Hi Louis, you could set default routes on the ASA's with tracking, and use ospf downstream to inject the default route in to the network with default information originate - this will only advertise out a default route if it has it in the routing table. With SLA you can track internet reachability by IP SLA echo to something like 8.8.8.8. Both sides can advertise this in to the network, if one goes then there is one left. Just be mindful of the policies and NAT required, you will have to duplicate the rules on the ASA's. With the NAT you have to ensure, that outgoing traffic comes back in the same path it left so it doesn't break connections.

Urgent-- Do we have 10.2.0.2 s/w for grid control on solairs environment

Hi,
Do we have 10.2.0.2 software for grid control management server on a sun solaris sparc environment? I see we have one for agent but we are not seeing anything w.r.t to OMS ?
Your help is appreciated!
Sravanthi.

The error we are getting is (from .err file ) :
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:243)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4494)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4443)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:126)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

Load balance connections from Portals 6 SP12 to R3

Hi All,
Can you give me a clue/help on how i can load balance connections from Portals 6 SP12 to R3 47x200.
I have 5 servers, but the CI is getting hammered by portal as its not load balancing the workload across the other 4 app servers.
Regards
Karthikeyan

Hi,
You have an option while creating the backend system in the portal, You can create the system as System for load balancing. I am not sure that this can be changed once you create the system. You can delete the system and create the new system with the load balancing option.
Regards,
Vamshi.

"Problem with Trial - problem loading trial period for Adobe Photoshop CS3"

Hello,
I installed Photoshop CS3 Trial and whenever I run it and choose to begin my trial period I get the following error message:
"Problem with Trial - problem loading trial period for Adobe Photoshop CS3".
I tried uninstalling and reinstalling, and even ran the Adobe CS3Clean Script but nothing seems to help.
I should note I never installed any earlier version of Photoshop on my system (I use a fresh copy of Windows XP with only a few programs installed).
Any suggestions will be appreciated.
Thanks,
David

i had the trial of photoshop on and the trial has run out my friend has given me a disk with adobe photoshop on and i cant do it beacause of the regestry code the photoshop puts in after the trial has ended to tell my pc that i cant have photoshop on my computer again :(:( now i have herd that you can remove the codes but it is quite hard well iam willing for this challenge and if anyone could help me i would reall welcome your help or if anybody has got the link to a tutorial to tell me hoe to do it i would aprecitae that to thank you all very much and post bak soon please

Database limits for Grid control repository?

Document "Oracle® Database Licensing Information / 10g Release 2 (10.2)" [Part Number B14199-10] discusses the restricted use license of database for grid control repository and rman repository use.
nfrastructure Repository Databases A separate Oracle Database can be installed and used as a Recovery Manager (RMAN) repository without additional license requirements, provided that all the Oracle databases managed in this repository are correctly licensed. This repository database may also be used for the Oracle Enterprise Grid Control repository. It may not be used or deployed for other uses.
A separate Oracle Database can be installed and used as a Oracle Enterprise Manager Grid Control (OEM Grid Control) repository without additional license requirements, provided that all the targets (databases, applications, and so forth) managed in this repository are correctly licensed. This database may also be used for the RMAN repository. It may not be used or deployed for other uses.
There is no discussion of licensing requirements for options of the database (RAC, partitioning, etc) when the database stays within these repository use restrictions. Therefore it is unclear whether the Grid Control can be configured to provide appropriate monitoring without additional licenses.

This is the reply I received from release
management:
If they have deployed an EE edition of the database
as an OEM repository, and then want to protect that
with RAC or Data Guard, or make more Secure with ASO
or Database Vault, or indeed get any of the
additional benefits any of the options provide, then
they will need to license the option.
Let me know if that is still not clear, and I'll go
back again.Thanks.
There is a minor inconsistency in their response ... they say "if deployed on EE". However, as far as I know OEM repository required VPD, which is available only on Enterprise Edition (see http://download-east.oracle.com/docs/cd/B16240_01/doc/em.102/e10953/pre-installation_req.htm#CHDGIEAD)
However, it is quite clear that 'they' are telling us that the RAC option is not inherent in the "Special Use Licensing" as described http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#CJAHFHBJ .
The implication (not necessarily a topic for this forum) is that the OEM is not guaranteed to be able to provide basic monitoring and reporting functionality without additional license fees to make OEM more highly available than the targets being monitored.
It would be nice to have the information about which Oracle products (database and app server) have included licenses with a basic Grid Control install and which require additional licenses as part of Chapter 1 of http://download.oracle.com/docs/cd/B19306_01/license.102/b40010/toc.htm (That document goes into excruciating detail about the extra packs, but ignores the basics.)
For that matter, since OEM Grid Control can not be purchased, it would be nice to have a list of products that provide license to install Grid Control, again in Chapter 1 of the Grid Control Licensing document listed above.
I appreciate your time in having dug into this.

Does 8i client support load balance connection on 10g RAC?

We will migrate our server to Oracle 10g with RAC and ASM.
On the other hand, our client machines are using Oracle 8i.
Does 8i support load balance connection on 10g RAC server?
Thanks.
Jimmy Tang

Your Client Machines are running the 8i client?

What is Hardware/O.S. Recommendations for Grid Control server

I understand both Linux and Window servers are supported for Grid Control Installation.
However, since we are running Exadata database and cells, what would be your recommendation when we choose which O.S. we should run G.C. on?
Since the entire Exadata environment is running Linux, so, personally I'd prefer to use Linux server. But, what is your preference, and please detail your reasons.
Thank you!
Edited by: 943714 on Jul 12, 2012 9:37 AM

Grid Control (OEMGC 11g) for Windows is only available (certified) for 32 bit Windows. So you can run into memory limitations, dependeing on the number of agents/targets you will be monitoring. Second you have to install Cygwin on your Windows server if you want (or need) to be able to SSH to a Linux/Unix server. Installing Cygwin is very problematic to say the least.
If you would use OEMCC (12c), and I don't know why you wouldn't, you can install the 64 bit version for Windows however you still have to install Cygwin.
So in your case I would go for the Linux version.
Eric

Best Load Balancing solution for NMS 4.15

What is the best load balancing solution for Messaging Server with 250 users?

What are you trying to achieve? I do not understand from your question what it is you are trying to accomplish. What component(s) of NMS are you trying to load balance?

Load balancing plugin for Sun WS 6.1

Where can I find details about the load balancing plugin for Sun Java Web Server 6.1?
Can I work around that by using the reverse proxy plugin and configure to work as a Load balancer?
thx
Anand

Details about using the reverse proxy plugin can be found here:
http://docs.sun.com/source/819-0902/rpp61.html
The reverse proxy plugin can be used for load balancing. Use the service-passthrough Service SAF for this purpose. You are particularly interested in the "servers" parameter
"servers - A quoted, space-delimited list of the servers that receive the forwarded requests. Individual server names may optionally be prefixed with http:// or https:// to indicate the protocol and/or suffixed with a colon and integer to indicate the port."

Grid Control 10g and Ports

Hi,
Using EM Grid Control 10g, what ports are required to be opened on a firewall to enable communication between the GC Agent and the Management Server (for either insecure or secure mode)?
Thanks in advance
regards
Manoj

Have a look at $ORACLE_HOME\install\portlist.ini for the ports in use for your installation.
By Default, it uses the non-secure port of 4889 which I do not think requires opening.

Configure shared loader directory for Grid control

Hi,
I have been setting up grid control and a standby grid control according to the document MAA_WP_10gR2_EnterpriseManagerBestPractices.pdf
The part I am having trouble with is how to configure the shared loader directory.
Now my 2 servers are standalone, there is no shared storage. Can any one help in this configuration.
regards
Alan

Now my 2 servers are standalone, there is no shared storage. Can any one help in this configurationYou need a shared storage. Read more documentation for full configuration. That document is a best practice or overview.

Problem Load Balancing connections for Grid Control Console on port 80!

Similar Messages

Maybe you are looking for