Problem loading data to Hyperion Planning app. from Oracle EBS using ERPi

I'm using ERPi to load data to Planning application from EBS.
I have configured Source and Target, created import formats, location, data load rules etc.
When I'm running data load rule it is showing that data is imported and exported sucessfully. I can see data in the right format in data load workbench. ODI shows process completed sucessfully. But still there is no data loaded in Planning.
Even AIF_HS_BALANCES staging view in ERPi repository shows correct data.
Can some one tell me what could be the problem.
Or where I can see logs for the data load step for Planning.
ODI operater logs are not very clear to me. Same for log tables in ODI work repository.

Hi Tony
Apologies for the delay (my email spammed the notification that you had replied, helpful!!). When you say that you have done it but discourage accessing the tables directly how did you achieve this? Were you just careful which data intersections your selected from the tables (e.g. always base level data so it is stored not calculated)?
I have used the HFM relational tables a couple of times to make use of the metadata that they contain but not tried to get data before.
Regards
Stuart

Similar Messages

Error encountered while loading data into an Essbase cube from oracle DB

Hi All,
I am trying to load data into an Essbase cube from Oracle db. Essbase is installed in an 64 bit HP-UX machine and oracle database on HP -UX 11.23 B server. While performing the above I am getting the below error messages:
K/INFO - 1021013 - ODBC Layer Error: [08001] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory].
OK/INFO - 1021014 - ODBC Layer Error: Native Error code [1034] .
ERROR - 1021001 - Failed to Establish Connection With SQL Database Server. See log for more information.
Can you please help me out in identifying the issue, as why it could have occured , because of network problem or is there anything related to databse?
Regards,
Priya

The error is related to Oracle, I would check that it is all up and running
ORA-01034: ORACLE not available
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load data to Hyperion planning application using odi

Hi All,
When I try to load data into planning using odi, the odi process completes successfully with the following status in the operator ReportStatistics as shown below but the data doesn't seem to appear in the planning data form or essbase
can anyone please help
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 2, in <module>
Planning Writer Load Summary:
     Number of rows successfully processed: 20
     Number of rows rejected: 0
source is oracle database
target account dimension
LKM SQL TO SQL
IKM SQL TO HYPERION PLANNING is used
In Target the following columns were mapped
Account(load dimension)
Data load cube name
driverdimensionmetadata
Point of view
LOG FILE
2012-08-27 09:46:43,214 INFO [SimpleAsyncTaskExecutor-3]: Oracle Data Integrator Adapter for Hyperion Planning
2012-08-27 09:46:43,214 INFO [SimpleAsyncTaskExecutor-3]: Connecting to planning application [OPAPP] on [mcg-b055]:[11333] using username [admin].
2012-08-27 09:46:43,277 INFO [SimpleAsyncTaskExecutor-3]: Successfully connected to the planning application.
2012-08-27 09:46:43,277 INFO [SimpleAsyncTaskExecutor-3]: The load options for the planning load are
     Dimension Name: Account Sort Parent Child : false
     Load Order By Input : false
     Refresh Database : false
2012-08-27 09:46:43,339 INFO [SimpleAsyncTaskExecutor-3]: Begining the load process.
2012-08-27 09:46:43,355 DEBUG [SimpleAsyncTaskExecutor-3]: Number of columns in the source result set does not match the number of planning target columns.
2012-08-27 09:46:43,371 INFO [SimpleAsyncTaskExecutor-3]: Load type is [Load dimension member].
2012-08-27 09:46:43,996 INFO [SimpleAsyncTaskExecutor-3]: Load process completed.

Do any members exist in the account dimension before the load? if not can you try adding one member manually then trying the load again.
Cheers
John
http://john-goodwin.blogspot.com/

Problem loading data from the PSA to the InfoCube

Hello experts.
I'm having a problem loading data from the PSA to the InfoCube.
I'm using a DTP for this process but is happening the following error:
"Diagnosis
      An error occurred while executing the transformation rule:
      The exact error message is:
      Overflow converting from''
      The error was triggered at the point in the Following Program:
      GP4KMDU7EAUOSBIZVE233WNLPIG 718
System Response
      Processing the record date has Been terminated.
Procedure
      The Following is additional information included in the higher-level
     node of the monitor:
     Transformation ID
     Data record number of the source record
     Number and the name of the rule Which produced the error
Procedure for System Administration
Have already created new DTP's deactivate and reactivate the InfoCube, the transformation, but solves nothing.
Does anyone have any idea what to do?
Thank you.

HI,
Is it a flat file load or loading frm any data source?
try to execute the program GP4KMDU7EAUOSBIZVE233WNLPIG 718 in Se38 and check if its active and no syntax errors are there.
Check the mapping of the fileds in transformations weather
some data fileds are mapped to decimal or char 32 filed is mapped to Raw 16
or calweek, calmonth mapped to calday etc.
Check in St22 if there any short dumps ..
Regards
KP

Issue while loading data to sample essbase app using odi

while executing data load the error is
Now, while loading data to an essbase app i am getting the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx4.f$0(<string>:23)
at org.python.pycode._pyx4.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase(Unknown Source)
... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)

Hi,
It means in your options of the KM you have it set to quit when it hits one error, if you set it to 0 (infinite) then it will not stop no matter how many data load errors it hits.
If you set it to 0 and run the interface, depending on how you set up the options in the KM it can write to two log files, which you should check.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to load Dimension into Hyperion planning using ODI ?

Hi All
We are trying to load Dimension into hyperion planning Ver. 11.1.2 using ODI. We have created the interface and mapped the source csv file to target planmning application using ODI KM.
LKM file to SQL
IKM SQL to Planning
We get success in ODI's Operator but the Dimension is not updated nor new data is insreted.
We get this message in Error file:-
+
Retail Format,Parent,Alias: Default,Data Storage,Two Pass Calculation,Smart List,Data Type,Plan Type (APlan),Error_Reason
ABC,Total Format,,StoreData,,,,Aplan,Cannot load dimension member, error message is: java.lang.RuntimeException: Fetch of saved member "ABC" failed.
+
We get this message in log files:-
+
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Oracle Data Integrator Adapter for Hyperion Planning - Release 9.3.1.1
2010-07-22 07:04:06,550 INFO [DwgCmdExecutionThread]: Connecting to planning application [******] on [********]:[11333] using username [admin].
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: Successfully connected to the planning application.
2010-07-22 07:04:06,597 INFO [DwgCmdExecutionThread]: The load options for the planning load are
     Dimension Name: Retail Format Sort Parent Child : false
     Load Order By Input : false
     Refresh Database : true
2010-07-22 07:04:06,612 INFO [DwgCmdExecutionThread]: Begining the load process.
2010-07-22 07:04:06,612 DEBUG [DwgCmdExecutionThread]: Number of columns in the source result set does not match the number of planning target columns.
2010-07-22 07:04:06,659 INFO [DwgCmdExecutionThread]: Load type is [Load dimension member].
2010-07-22 07:04:06,675 ERROR [DwgCmdExecutionThread]: Record [[ABC, Total Format, null, null, StoreData, null, null, null, null, null, null, null, null, null, Aplan, null, null, null]] was rejected by the Planning Server.
2010-07-22 07:04:06,675 INFO [DwgCmdExecutionThread]: Planing cube refresh operation initiated.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Planning cube refresh operation completed successfully.
2010-07-22 07:04:08,425 INFO [DwgCmdExecutionThread]: Load process completed.
+
Please help out .....

Can you check the error log file as you have posted the log file, it should give more information to why the records were rejected.
Cheers
John
http://john-goodwin.blogspot.com/

Load Data with 7.0 DataSource from Falt file to Write Optimized DSO

Hi all,
we have a problem loading data from flat file using the 7.0 datasource.
We have to load a flat file (monthly) into a WO DSO. The infopackage load file in full mode into the Datasource (PSA) and the DTP Load in delta mode data from datasource into the WO DSO.
When i load the second file in the Datasource, the DTP load all data present in the Datasource and not only the new one as aspected using Delta mode.
Has anyone any tips to help me?
Thank you for help.
Regards
Emiliano

Hi,
Iam facing the similar problem.
Iam using Write Optimized DSO and i have got only 1 req in PSA (have deleted all previous req from PSA and DSO).
When iam doing a delta load from PSA to DSO, i expect to see only that 1 req to get loaded into DSO.
But, its picking up the data from 3 other reqests and doubling the records...
Can you please help me, how did you managed to get out of that isue?
Cheers,
Nisha

Steps to migrate Hyperion Planning application from 9.2.0 to new 9.3.1 env

We currently have 9.2.0 Hyperion planning installed in a windows env. We are planning to setup a new Hyperion planning env on a totally new hardware upgraded env. Would be appreciate if some can outline steps invloved to migrate Hyperion Planning apps, forms, BR ect from 9.2.0 to the newly setip 9.3.1 env. Is there any documentation, URL's to do the above. Any help would be greatly appreciated. Any issue to look out for, setbacks details would be helpful.
Thanks..

Hi,
One way of doing it would be :-
Create a new database for your planning application 9.3.1
Create a datasource to the database
Create a fresh planning application on version 9.3.1 make sure the admin is the same name as your old 9.2 planning app
Go into the database tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
Go into the database planning system tables and HSPSYS_APPLICATION, clear out the version field for the application you have created
Stop Planning
Restore the 9.2 planning application database over the one created in the first step
Go into the HSP_USERS table and update the SID for user id 50001
Start planning
Go to planning web and you should see your application when you try and log in it should take you to a migrate screen.
If you are requiring to migrate users as well, you will have to make sure you create them in Shared Services and then use the updateusers utility in the planning bin directory.
Or you could try using the copy app utility though I don't believe it is the best utility about and not sure how it handles between different versions(http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch09s01.html)
Cheers
John
http://john-goodwin.blogspot.com/

Unable to log in to Hyperion Planning App Wizard

Dear All,
Unable to log in to Hyperion Planning App Wizard. This is my new installation. There is no error message in the planing windows. After click on log on button, the page just getting refresh and its come to same page only.
errors in in the planning logs......
<Nov 27, 2011 1:33:33 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
<Nov 27, 2011 1:33:33 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
<Nov 27, 2011 4:36:12 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
<Nov 27, 2011 4:36:16 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
<Nov 27, 2011 7:33:45 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
Please help me on this issue...
Thanks
GTS.

Those are just warnings and shouldn't be an issue.
What browser are you using, have you tried to go directly and through workspace to the application creation wizard.
Cheers
John
http://john-goodwin.blogspot.com/

Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

Yes. Delete the Apps that were not Purchased using Your Apple ID.
But a Restore as New is the way to go.

Hyperion Planning Upgrade from 11.1.1.3 to 11.1.2.2

Hyperion Planning Upgrade from 11.1.1.3 to 11.1.2.2
So far I have done the following 3 steps:
1. I have successfully installed and configured Hyperion Planning 11.1.2.2 in a new Server. (Windows Server 2008 R2).
2. I have created a blank classic Planning Application in 11.1.2.2.
3. I have copied the relational database from 11.1.1.3 to 11.1.2.2
Could you please let me know the next steps to perform the upgrade?
Should I use the Migrate Button in the Hyperion Planning Webpage or use the option in the EPM System Configurator "Upgrade existing database to the current release from 11.1.1.3". Please advise.
Note : A native User is the owner of the Planning Application in 11.1.1.3 and hence I made the same in 11.1.2.2 also.
Also, please let me know if I need to migrate the shared services security and convert the HBRs to Calc Manger rules first before upgrading the Planning Application.
Thanks in advance.

Thanks John for your quick response.
Yes, I have performed a clean install and then going for upgrading the existing Planning Application.
The Application owner in both the source and target Applications is a native user named hypadmin (not the default admin user). Do you want me to change the owner to default admin user, or the user hypadmin is ok to go with?
Please advise.
Also, is there any specific order I need to follow for migrating the below components?
1. Shared Services Security
2. HBRs to Calc Manger Rules
3. Existing Planning Application Upgrade

Hello. I have a problem. I cannot delete any apps from my ipad. It won't even wiggle when i tap and hold on the icon. There's also no restrictions and passcodes in my settings. My photos on camera roll even get lost once i shut down my ipad. Please help.

Hello. I have a problem. I cannot delete any apps from my ipad. It won't even wiggle when i tap and hold on the icon. There's also no restrictions and passcodes in my settings. My photos on camera roll even get lost once i shut down my ipad. Please help.

The preinstalled apps, those that came as part of the iOS, cannot be deleted and will not shake or provide the black circle-X for deletion.
Others should do that if you touch and hold for a few seconds.
If they are not, do a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if that appears.

Hyperion Planning Copy from Dev to QA

Hi
Is there a procedure to copy a Planning apps from one envoirement (Dev) having EPMA/Shared Services/Planning to another envoirnment (QA) having the same components ? If anybody has done this please let us know the procedure ?
Thanks
V

Hi,
First of all you never mentioned the version of planning.
Second have you had a search of this forum to find the answers yet?
Cheers
John
http://john-goodwin.blogspot.com/

Planning data to Oracle Tables Using ERPi???

Hi All,
We are using a Hyperion V11.1.2 having a scenario like
we want ot load data in to Oracle Tables or GL Balance Tables from Planning Application using ERPi , but we are not loading data directly from GL Balance to Planning using ERPi, so can we load data from Planning to OeBS or Oracle Tables using ERPi???
Are there any special adaptars or special way to load data back to OeBS GL Balance ???
Regarda
Kumar

Hi ram
let me know how can i upload oracle tables to XML
regards
Anand

For Drill Through From Hyperion Workspace Forms to Oracle - EBS - Financail

Hi
i need to drill through from Hyperion Workspace Forms to Oracle - EBS- Financial.
What are approaches ?
Weather it is possible by using FDM? or ERPi adapter ?
Or it requires all Tools (FDM, ODI, ERPi ) ?
Urgent ..
Need ur help ?
regards
Sher

FDM/ODI/ERPI, but note it is feasible to load data using ERPi without FDM (but still need ODI installed) in which case it should drill back via the ERPi landing stage.
Before going any further i think you need to decide on your data flows and whether you use ERPi or ERPi / FDM to load data, and perhaps search the internet and read some documentation to understand the system, or, get some consultancy.
Edited by: user10757003 on 20-Sep-2012 09:04

Problem loading data to Hyperion Planning app. from Oracle EBS using ERPi

Similar Messages

Maybe you are looking for