Problem Making Devilspie Package

I had devil's pie working in Arch, but had to do a reinstall of my system and am having trouble building the package this time.
checking for WNCK... configure: error: Package requirements (glib-2.0 >= 2.9.1
gdk-2.0
libwnck-1.0 >= 0.17) were not met:
No package 'glib-2.0' found
No package 'gdk-2.0' found
No package 'libwnck-1.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables WNCK_CFLAGS
and WNCK_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
For glib, I have 2.10, I'm wondering if there might be an issue since the package is called glib2, there's also another package called glib which is only 1.2
For libwnch I have 2.14
I didn't have gdk, and couldn't find it in the repositories or in aur, but found this which I tried compiling. It seems to be a lower version though, and didn't work with that.
I'm not sure how to go about modifying those variables it mentions, and I don't have a man entry for pkg-config.
Don't suppose anyone else has gotten similar errors or knows how to proceed from here?

Is pkgconfig installed? If not, install it:
pacman -S pkgconfig
and try again to build devilspie.

Similar Messages

Problem making/receiving/disconnecting calls and p...

I was looking for a new phone to replace my old Samsung Star, but I was unable to justify this expense. So, I saw Nokia Lumia 710 with it's GPS software and hardware as part of the package. Windows phone looks so beautiful that I just bought it last march, 23th.
Now, verifying this forum I realize that my problem, some how, exists since January in Europe. As many people here I have problems to end a call, but in my case the call never completes and when I try to disconnect Lumia just does nothing beyond show "disconnecting" forever. The only way to recover control is turning Lumia off.
Its true that my carrier has a very weak signal where I live (at my apartment), but my old Samsung at least make and receive calls. Some times I must move near to the window to have a better reception, but works. With Lumia, different from what I was expecting (a premium Nokia quality signal - the best possible reception), some times just do not work! Some times people calls me and the phone do not ring. Some times I receive that screen offering me the opportunity to send a message like "I'm at a meeting" or something like that, but I do not have the opportunity to receive that call. This is very frequent since I bought this Nokia. Some times, when I make a call, Lumia pretend to call, pretend that the other person is connected, but, in fact, there is no calling sound. The phone remains mute all the time, there are no call. When I give up, I press "disconnect" and Lumia shows "disconnecting" but nothing happens. To recover phone control I must turn it off to try again. Once I was so angry that I press many buttons and Lumia freezes up completely and was needed to remove battery to turn off.
About GPS, that was my main excuse to expend a lot of money on a new phone: Nokia Lumia GPS is disappointing. Lumia GPS looks like loose satellite signals very frequently. I decided to make a comparison between my Lumia and my wife's iPad. Working totally offline, side by side at my wife's lap, while iPad was able to show immediately every turn I make, Lumia takes long time to realize that. In fact, most of time, Lumia just realize that I turn when I was reaching next corner. I'm using Nokia drive 2 and, in this test, since I don’t have a GPS software at iPad, I just leave Lumia and iPad with the map showing our position. I do not set a destination.
Finally, my last disappointment is about windows Phone and the “one account policy”. Really? They think people will be happy to give up from their messenger accounts or Xbox accounts to use Windows Phone? When I turn on my Lumia for the first time it asks me to enter or create a Microsoft account. I think about and I realize that I don’t want to add payment information to my very old Hotmail/messenger account, so, I create a new one. My mistake because soon I discover that Windows Phone do not let me choose a different account for Messenger or Xbox.
I call Nokia in Brazil to find a solution for my two main problems: making/receiving calls and the GPS performance. The only solution they can think about was reset my phone. I do that a few hours ago. This time I choose to enter my Messenger account to be able to chat with my friends, but, of course, I loose my Xbox id created with the other account.
“One account policy” is so “not smart” that is very hard to understand why they do that. The need to reset the device to choose another account is unbelievable. Mean while, with iPhone/iPad, to change accounts is so easy…
I will test my phone for the next few days to verify if reset solve all my problems, but right now I’m very disappointed.
(I hope you can understand my poor english).

Reset Lumia 710 do not solved my problem. I was forced to send the device to technical support. Even if they was unable to reproduce the problems I faced at home, they did a flash reset (or something) and now my phone always ring when people call and I can end calls without a problem. For now those problems disappeared.

Making Solaris package and dealing with symlinks

Hello,
we are developping an application that runs on Solaris 8 and 9, and we distribute it as a number of packages. We have a problem in one package where we have to install some binaries in a subdirectory under /opt. If we put:
d base /opt 0775 root bin
d base /opt/subdir 0755 root bin
In the template file used in building the package, then we have a problem on one of our machines, where /opt
is a symlink to /export/home/opt - it seems pkgadd wants /opt to be a regular directory, so it creates it, overwriting the symlink and making everything previously under /opt unavailable (though it's still under /export/home/opt).
If we remove the files, when we install the package on a machine without an /opt directory, the install fails. Is there some way around these two corner cases? Like telling pkgadd that if /opt is a symlink to leave it like that?

I checked out https://wiki.archlinux.org/index.php/Initramfs, and I'm not sure what to do. I rebooted a few times in attempt to get things going. I'm assuming I need to start by logging in to the live CD as root and mounting the sda in which Arch is installed? I don't know how to mount root nor know the complete title for the Arch partition (sda x,x). Sorry for the hassle.
Edit: Found https://wiki.archlinux.org/index.php/Ch … partitions. Be back in a bit.
I currently have the temporary filesystems mounted, chrooted, and am in bash.
# mkinitcpio -p linux
doesn't work. I tried
mkinitcpio -g ..... 3.6.10-1-ARCH
and I received something about 3.6.10 and a module directory.
Last edited by illusory (2012-12-23 23:26:00)

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114957)

How can I solve a Parse Error: "There was a problem parsing this package"

Hello;
I developed a really simple app in Flash Pro CC for android. I published it using AIR 13.0 for Android. When I tried to install it I received the Parse Error: "There was a problem parsing this package"
Im not sure if the problem has something to do with my app xml file, but here it is:
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://ns.adobe.com/air/application/13.0">
     <id>TOeatorNOTTOeat</id>
     <versionNumber>1.0.0</versionNumber>
     <versionLabel>TouchEvent</versionLabel>
     <filename>TO eat or NOT TO eat</filename>
     <description/>
     <name>TO eat or NOT TO eat</name>
     <copyright/>
     <initialWindow>
          <content>TO%20eat%20or%20NOT%20TO%20eat.swf</content>
          <systemChrome>standard</systemChrome>
          <transparent>false</transparent>
          <visible>true</visible>
          <fullScreen>true</fullScreen>
          <aspectRatio>landscape</aspectRatio>
          <renderMode>gpu</renderMode>
          <autoOrients>false</autoOrients>
     </initialWindow>
     <icon>
          <image36x36>icons/icon36x36.png</image36x36>
          <image48x48>icons/icon48x48.png</image48x48>
          <image72x72>icons/icon72x72.png</image72x72>
          <image96x96>icons/icon96x96.png</image96x96>
     </icon>
     <customUpdateUI>false</customUpdateUI>
     <allowBrowserInvocation>false</allowBrowserInvocation>
    <android>
          <manifestAdditions>
               <![CDATA[<manifest> </manifest>]]>
          </manifestAdditions>
     </android>
     <supportedLanguages>en</supportedLanguages>
</application>
What do you think is the best to check?

i don't see any problem with your manifest.
try saving your fla and the published files to a new directory and see if the error resolves.

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problem in importing package

i am new to java and facing problems in importing package which are self made.
secondly does JDK 1.1.3 can support swing

Hi,
I had some problems myself. I will add few lines, maybe it helps:
OK, let's assume that you work in a directory. In this case, set classpath to this hierarchy as well as to "." ('this' hierarchy - like in DOS).
Now, assume that you want to use packages MyPack1 and MyPack2. The source files of classes belonging to MyPack1 must:
- start with command
package MyPack1;
- be located all in the directory MyPack1
(and the same for MyPack2, of course)
If you want to use MyPack1 within MyPack2, you have to include:
import MyPack1.*;
even though MyPack1 is, in fact, located on path: ../MyPack1/*
(trust the classpath is important here)

Problem with oracle packages CREATE PACKAGE some packagename in MaxDB

Hi All,
I am having Problems in Creating Packages from MaxDB ..Does MaxDB supports the CREATE PACKAGE <some packagename>concept ? if so please help me how to achieve in creating packages ..
My sample Oracle package Creation is as follows:
CREATE OR REPLACE PACKAGE BODY acs
AS
FUNCTION add_user (
    user_id     IN users.user_id%TYPE DEFAULT NULL,
    object_type     IN acs_objects.object_type%TYPE DEFAULT 'user',
    creation_date   IN acs_objects.creation_date%TYPE DEFAULT sysdate,
    creation_user   IN acs_objects.creation_user%TYPE DEFAULT NULL,
    creation_ip     IN acs_objects.creation_ip%TYPE DEFAULT NULL,
) RETURN users.user_id%TYPE
IS
    v_user_id       users.user_id%TYPE;
    v_rel_id        membership_rels.rel_id%TYPE;
BEGIN
    v_user_id := acs_user.new (user_id, object_type, creation_date,
                creation_user, creation_ip, email, ...
    RETURN v_user_id;
END;
END acs;
show errors Can you Please Explain me how to write the same Package in MaxDB?
Thanks & Regards,
Shanmukh
Edited by: shanmukh babu on May 16, 2008 10:11 AM

Hi Shanmukh,
MaxDB does not have packages like you'll find them in Oracle.
But you can define your own functions and procedures.
From the code-example you posted, I would say that a procedure will do it ...
I suggest that you first read the documentation on procedures [CREATE DBPROC Statement|http://maxdb.sap.com/doc/7_6/a7/41ee11605911d3a98800a0c9449261/frameset.htm]
There you'll also find an example in the Tutorial section.
Be aware that the procedural capabilities of MaxDB are far less enlarged as in Oracle - but they do exist and work in their realm.
So porting a full PL/SQL application layer to MaxDB procedures may turn out to be quite difficult and/or not the best choice at all.
KR Lars

URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS

Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh Rana

I got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh

Problem installing a package from AUR

I'm not expecting anyone to install this package just to try and answer my question but,,
I have /home on a 10 gig space ext3 and it's only 2% full.
When I try and install doom3-phantasm, the package downloads, builds and when it's time to install a window says not enough space to install.
No way this single game is over 9.5 gigs.
I'm not even seeing where it's trying to install to.
Is this a problem with the package build or am I not seeing something?

I wrote the pkgbuild, so I've got it installed
$ pacman -Ql doom3-phantasm
doom3-phantasm /opt/
doom3-phantasm /opt/doom3/
doom3-phantasm /opt/doom3/phantasm/
doom3-phantasm /opt/doom3/phantasm/config.spec
doom3-phantasm /opt/doom3/phantasm/description.txt
doom3-phantasm /opt/doom3/phantasm/guis/
doom3-phantasm /opt/doom3/phantasm/guis/assets/
doom3-phantasm /opt/doom3/phantasm/guis/assets/splash/
doom3-phantasm /opt/doom3/phantasm/guis/assets/splash/launch.tga
doom3-phantasm /opt/doom3/phantasm/pak999.pk4
doom3-phantasm /opt/doom3/phantasm/phantasma.pk4
doom3-phantasm /usr/
doom3-phantasm /usr/bin/
doom3-phantasm /usr/bin/doom3-phantasm
doom3-phantasm /usr/share/
doom3-phantasm /usr/share/applications/
doom3-phantasm /usr/share/applications/doom3-phantasm.desktop
doom3-phantasm /usr/share/licenses/
doom3-phantasm /usr/share/licenses/doom3-phantasm/
doom3-phantasm /usr/share/licenses/doom3-phantasm/LICENSE
Alternatively, take a look in the "pkg" directory of where you built it, or just examine the .pkg.tar.gz installation file.
What does this show:
df -h
Last edited by brebs (2008-04-04 01:00:53)

I can't install wmpfirefoxplugin at Firefox 4, It show "The installer has encountered an unexpected error installing theis package. This may indicate a problem with this package. The error code is 2755.

The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2755.

Although you're getting a different error message, perhaps try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

The installer has encountered an unexpected error installing this package.This may indicate a problem with this package. The error code is 2869

Hi,
I am getting error "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2869." while installing SAP B1DE.
Note:
Downloaded the B1DE from B1DE:SAP Business One Development Environment Tools
Using Window XP , .Net 2008, SAP B1 8.81 Version
Company Name, Contact Person, Namespace all were given while installing. All of its length is less than 8
Any help is appreciated.
Thanks in advance.
Parvatha Solai.N

Hi,
Try post a comment in B1DE 2.0.1 new version! blog.
Beni.

Anyone else having problems making a hyperlink to a file in CS4?

Anyone else having problems making a hyperlink to a file?
I have a document in CS4 that I'm exporting to pdf. When I create a hyperlink in CS4 to a file, I am getting the message when I click the link in the pdf ' Cannot find the file:C%5Document' etc.
When creating the link, File is selected, Shared Destination is unchecked & checking the link using 'Go to Destination' shows the link works.
In Acrobat 9 Pro, I've checked the properties of the link - when exported from CS4, the Link Properties - Actions are 'Open a web link' 'file:C:\Documents%20'etc whereas if the link is created in Acrobat the link properties are ' 'Open a file' 'file:C\Documents and Settings' etc, and it works.
Is this a bug or am I missing something?

I'm only getting that to work with the catalogue & sample in the same folder. In any case from a useability standpoint using URL brings up the Security Warning & putting the catalogue pdf in the same folder as 100 sample pdfs makes it more difficult to locate.
I'm at a loss to understand why the functionality of creating a link in InDesign cannot be the same as Acrobat; where you can select 'Open a file', browse to that file and the relative links are maintained when you burn to a disc. InDesign looks as if it will do the same but when you select File as the link & browse to the destination file but InDesign treats it as a URL & brings up the the web link cursor in the finished pdf. That still looks like a bug to me.

Problem downloading Mars Package Inspector

Due to a server setup problem, the Mars Package Inspector may
download as a .zip file instead of an .air file. If this happens,
save the file to disk, rename it to have the .air suffix, and
double click to install. The problem should be corrected
shortly.

Thanks for the feedback. If you install Beta 1 first then
Beta 2 (of AIR), the problems seem to be solved. We are in the
process of updating the site with a new version that is 100% Beta 2
compatible and will have that out in the next few days I
hope.

Problem Making Devilspie Package

Similar Messages

Maybe you are looking for