Problem making jackd run as user [NOT SOLVED]

I use my own 2.6.14 kernel, but I get the same result with arch's 2.6.13-4-3
My user is in the audio group.
This is what I get:
[robert@eleanora ~]$ jackd -R -d alsa
jackd 0.100.0
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
JACK: unable to mlock() port buffers: Cannot allocate memory
cannot use real-time scheduling (FIFO at priority 20) [for thread -1228313680, from thread -1228313680] (1: Operation not permitted)
cannot use real-time scheduling (FIFO at priority 10) [for thread -1236706384, from thread -1236706384] (1: Operation not permitted)
It works well for root:
[root@eleanora robert]# jackd -R -d alsa
jackd 0.100.0
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
I have tried to follow the suggestion in the wiki to change the /etc/security/limits.conf to
@audio - rtprio 70
@audio - nice -10
@audio - memlock 250000
But it doesn't change anything.
Does anybody see what I'm doing wrong?

Yes, the user is a memeber of the audio group, and I have re-logged in and rebooted and tried everything I can think of. I have evne looked at the strace output, but it doesn't give any more information than the error messages from jackd.
I have a feeling that it could have to do with my sound card. My laptop has an intel-hda card, and I'm not sure it works perfectly with the driver, it behaves rather strangely. I don't get a Master or PCM mixer control, but I get a Front control, which works, and sometimes for some reason, I also get a PCM control. I have no idea if this can have something to do with my jackd problem, but I thought I'd mention it.

Similar Messages

Making package run as calling not owning user

When a package is run it is run as the user who ownes the package. How can I get the package, or to be more precise functions in the package, to run as the user who called the package. I.e. I have a package in the apps_user schema. I have a grant to allow bob to run the package. When bob runs functions in the package I want the package to run asbob, not apps_user.
Regards,
ben

Seems you need AUTHID CURRENT_USER in the package specification.
Consider the side effects:
http://asktom.oracle.com/pls/ask/f?p=4950:8:1444642806861410859::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:1168835334321
SQL> conn master/master
Connected.
SQL> create table t0 (id number);
Table created.
SQL> conn scott/tiger
Connected.
SQL> create table t0 (id number);
Table created.
SQL> create or replace package my_pkg
2 authid current_user
3 is
4   procedure ins;
5 end;
6 /
Package created.
SQL> create or replace package body my_pkg
2 is
3   procedure ins
4   is
5   begin
6    insert into t0 values(0);
7   end;
8 end;
9 /
Package body created.
SQL> grant execute on my_pkg to master;
Grant succeeded.
SQL> grant select on t0 to master;
Grant succeeded.
SQL> conn master/master
Connected.
SQL> exec scott.my_pkg.ins;
PL/SQL procedure successfully completed.
SQL> select * from t0;
        ID
         0
SQL> select * from scott.t0;
no rows selected Rgds.

Iphone5 IOS7 update problem, build A1429, running IOS6.0 "not eligible for requested build"

Bought the Phone from Apple in NL, never been jailbroken.
Running IOS6, but am in UK.. Always have some issues with the app store because I'm listed in UK, dont know why.. But guessing its same as when i want to buy someone a gift card through itunes it says in the small pro=int that it can only be used in the UK Itunes store..
But my problem is that it keeps saying that my phone is not eligible for the requested build, and im not sure why..
can anyone tell me why?
thanks.

This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Above from:
http://support.apple.com/kb/TS3694

Brightness Darkness problem with iMac running Snow Leopard - not a System Settings-brightness problem

hi. i'm running 10.6.8 on an iMac (details below). the screen is too dim for me---but it is physically capable of getting brighter.
the brightness controls in System Settings are as bright as they go. (this same setting is controlled by many keyboards with brightness buttons.) i want it brighter. it used to be brighter. my eyes are straining. again: i have already pushed the system settings as high as they will go, so please don't tell me to try that. already done.
if i run the System Settings / Display / Calibration, i can mess with the callibration and eventually the screen will get brighter. however, that totally screws up all the color, because it isn't calibrated properly.
my conclusion is: 1) the display itself, backlight, is probably fine. 2) i have no idea what to do about this and have been completely unsuccessful finding answers online.
thanks for any advice that might be floating around out there!
--computer details here--
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac9,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM91.008D.B08
SMC Version (system):          1.44f0
NVIDIA GeForce 9400:
Chipset Model:          NVIDIA GeForce 9400
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0867
Revision ID:          0x00b1
ROM Revision:          3379
Displays:
iMac:
Resolution:          1680 x 1050
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Display Connector:
Status:          No Display Connected

Problem with X11 running 256 colors finally SOLVED!

Good morning all.
Last August I posted thread regarding X11 not working with 256 colors.
http://discussions.apple.com/thread.jspa?messageID=2161056

Apple did it in the 10.4.9 update, but that slipped by me until I saw this post (so thanks!!!)

When i open my itunes of recent edition , i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.

When i open my itunes of recent edition 12.0, i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.

Try iTunes for Windows: How to turn off Compatibility Mode.
tt2

HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7. Message shows that iTunes has stopped working. This happens every time. I have updated iTunes Software. Will not solve the problem. What is wrong

I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
          iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
          "Check online for a solution and close the program"
          "Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
     Here are some of the Problem Details:
     "Problem signature: APPCRASH
     Application Name:     iTunes.exe
     Application Version: 11.0.1.12
     Application Timestamp: 50c8fc7e"

I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony

Run with User's rights not working as expected

I have a VBscript that runs the Quest Client Profile Updating Utility for migrating Outlook e-mail profiles to a new Exchange Server. For this tool to work it must be run using the User's security context when the user is logged onto the computer.
What I have found is that the script fails to run because SCCM is running the script with elevated privileges. The program is set with 'Only when a user is logged on' and a run mode of 'Run with user's rights'. The advertisement is set to run from
a distribution point and has two mandatory re-occuring schedules (Logon, and at 6:00 a.m. every day).
To test what is happening I created a separate Program that has the same program settings but only runs 'Cmd.exe /k echo' for the command line. If I run this SCCM program as a user who is not a member of the local administrators group
I can execute privileged programs like regedit.exe. If I run the Command Prompt from the Start\Accessories folder and try to run Regedit I receive an 'Access denied' message. It appears SCCM is running with elevated privileges.
Does SCCM run a program with elevated privileges? How can I make a program run without elevated privileges.
thank you for your help.

Actually I ran into a similar issue today trying to gather info about mapped network drives and found this thread when trying to troubleshoot it. Here's a summary of what I've done:
I have an SCCM package set up to run a script to dump the users' mapped drives to a text file. The program is set to run only if a user is logged on and to run in the logged on user's context. UAC is enabled. For users who are members of
the local Administrators group, the resulting text file was empty, as if no drives were mapped. Running the script manually (not via SCCM, just double-clicking the script) populated the text file with the expected results. So the script works correctly.
I suspected SCCM was running the package elevated, since drives mapped in the non-elevated context aren't visible to the elevated context.
To test, I created another package & program that runs a command I know requires elevation (ipconfig /registerdns) and pipes the output to a text file. I configured it in the same way, and for users who are in the local admin group, the text file results
indicate that the command ran successfully (which means it ran elevated). If I take the user out of the local admin group, making no changes to the package, then run the package again, the text file results say "This command requires elevation."
So, it appears SCCM is running with the highest elevation level for which the user has rights. I guess this makes sense, and it's not doing anything the user wouldn't normally have rights to do, but it does cause a problem when a program needs to run
under the user's non-elevated token. Any suggestions?
Thanks,
Matt

Problem with BP. Assignment: Business partner person to user not unique

I have a problem with a user. They have no BP assigned in PPOSA_BBP. We have found a BP in transaction BP.
When we try the BBP_BP_OM_INTEGRATE the message BBP_UM_UI048 appear" Assignment: Business partner person to user not unique" .
Any idea about how solve this??
Best regards
Jorge

Hi
Which SAP version are you using ?
The user needs to be attached to the Org Plan. (PPOMA_BBP)
Have you maintained the Contact person for this USer in the Org Plan. (PPOMA_BBP) ?
Please check the consitency of this BP as well.
Have you read the documenattion of the Transaction -> BBP_BP_OM_INTEGRATE ?
If no, here it is..
Transaction -> BBP_BP_OM_INTEGRATE
Short text
Object Synchronization and Repair
Purpose
This report enables you to run a consistency check for the integration of HR Master Data and Business Partner data. If not all data exists for the business partner, you can first synchronize data. When synchronization is run for organizational units, the basic data (name, description) and the address data is included; when synchronization is run for central persons, bank information is included in addition to the basic data and address data.
Prerequisites
To be able to run this report, integration between Organizational Management and SAP Business Partner must be active.
Features
This section contains information about the functions you can use to select and output data.
Selection
The following options enable you to restrict the selection of objects:
Central Person
In addition to selecting central persons created during integration between HR Master Data and Business Partner data, you can also select central persons who have been created locally. However, central persons created locally are not checked for consistency.
Employee (object type P)
This selection option is only available in HR systems. The corresponding central person is displayed together with the person. Both objects are kept consistent in the Basic Data, Address, and Bank Data columns.
Positions
Business Partners (Employee role)
Users
Organizational Unit(s)
You can specify specific organizational units for the selection.
Business Partner (Organizational Unit role)
Note:
The selection objects Position, Business Partner (Employee role), User, and Business Partner (Organizational Unit role) are only available if an implementation of BAdI HRALX_HRALXSYNC_BADI exists.
Branch as of Organizational Unit
This option enables you to select all objects in the structure for one or more organizational units. You can also restrict selection according to one of the following object types:
Central Persons Only
Employees Only
Positions Only
Business Partners Only (Employee role)
Users Only
Organizational Units Only
Business Partners Only (Organizational Unit role)
Include All Object Types
Changes Since
All organizational units and central persons for which changes have been made since the last time all objects were synchronized are read. When all objects have been synchronized successfully, a new change date is set.
Note:
If a selection has been made but the relevant input field remains blank, all objects of a particular object type are read from the database. This condition can lead to a long runtime, therefore, SAP recommends you also enter a restriction.
Output
The organizational units and central persons that have been found are displayed in a list that includes status data.
To facilitate navigation, a hierarchical tree structure is displayed on the left-hand side of the object list. The branches are sorted according to the type of action that is to be executed.
If an implementation of BAdI HRALX_HRALXSYNC_BADI exists, checks from this BAdI are executed in the External Checks branch.
If you double-click on the folder icon in the navigation tree, all objects are displayed in the list.
Note:
Meaning of status display for data in the Basic Data, Address, and Bank Data columns:
Icon Message Text Meaning
Green traffic light Business partner does not need to be synchronized with HR object data All business partner data is consistent with HR object data.
Yellow traffic light Business partner does need to be synchronized with HR object data Business partner exists. The business partner data is not consistent with the HR object data.
Red traffic light Object data is new and must first be created for the business partner The business partner does not yet exist or the the business partner data is incomplete.
No traffic light Object type does not include this type of data Check type is not relevant for this object.
Activities
To integrate business partners or to repair selected objects, you must select the relevant lines in the object list and choose Execute. Any errors that occur are displayed after synchronization.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Problem with "Group By" in Views - Not Displaying the Same for All Users

We have an Announcements List with its only View being set up to group by a metadata category field. We've done this many times on other kinds of lists and never had a problem. But with this list, about half the users can see only the ungrouped
set of announcements, whereas others actually see the items within their groups.
Those with "View" rights only can't see the grouped items - but that appears to be a coincidence as I promoted them to the same rights as others who can see them correctly, and that did NOT solve the problem. Everyone is using the exact same browser.
Note: the users who do NOT see the groupings see only a single category entry that displays only the name of the category list (but not the names of the actual categories within the category list). All the announcements are grouped under that one
entry for those users. This display looks exactly like it would if the categories had been left blank when the original announcements were created. But the categories are NOT blank, and the rest of the users can see them just fine, and the announcements display
within their appropriate groups.
I can't find anything in the View, the List Settings, or the User Permissions to explain this. What could be causing it, and how can I fix it?

Browser settings are controlled by central IT and are all identical.
The only difference I can detect is the second set of users (that don't see the category options) have only Read rights, whereas those with Contribute (or above) rights can see the categories. It doesn't make
sense that permissions would affect this, but I can't come up with any other differences.
Microsoft will not allow me to upload images. it says I can't upload images until they have verified my account, but there is no clue as to how, if or when that might happen. If you can tell me how to fix that, I can provide samples.

TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.

User not able to run a report.

Report Server has encountered a SharePoint error. (rsSharePointError) Cannot open database "dbname" requested by the login. The login failed. Login failed for user . For more information about this error navigate to the report server on the local
server machine, or enable remote errors

Hi Kunal, here are a few links that might point you in the right direction:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/cca6cb99-c86d-4ba6-b6b9-81ec88771aa8/users-not-able-to-see-the-published-reports?forum=sqlreportingservices
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/c6c1414c-c338-4222-a5ca-a554d3ad912c/problem-getting-some-users-to-be-able-to-run-reports-probably-security-of-some-sort?forum=sqlreportingservices
http://gj80blogtech.blogspot.com/2010/07/ssrs-error-report-server-has.html
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2597014
cameron rautmann

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

The previous text-based response from mozilla technical support did not solve my problem. Please contact me by telephone.

Hi cgb0006,
backbuttonsucks has posted an answer to your question on support.mozilla.org:
How to I rollback after update erased bookmarks and new version cannot access web?
backbuttonsucks wrote:
Your firefox profile is (most likely) located at the following location:
C:\Users\USERNAME\AppData\Roaming\Mozilla\Firefox\Profiles\
it sounds like you have multiple profiles as you say old bookmarks are appearing. Otherwise, you would have to restore this directory from backup. If you have previous versions turned on in windows OS, then you could right click on the folder and go to "previous versions" tab for the automatic backup.
Its possible the other profile is there somewhere in that directory. If you have multiple user profiles, take a look a the boomarks.html file to find the correct one.
The commands in this article should list all your profiles: https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles?redirectlocale=en-US&redirectslug=Managing+profiles
THIS UNFORTUNATELY DOES NOT SOLVE THE APPARENT NETWORKING PROBLEM (NOR WAS I ABLE TO FIND THE OLD BOOKMARKS), AND HAVING CHECKED MY NETWORK PARAMETERS, I SUSPECT THAT THE NEW VERSION IS NOT COMPATIBLE WITH MY OPERATING SYSTEM. I WISH TO BE WALKED THROUGH A ROLLBACK TO MY PREVIOUS VERSION, PREFERABLY WITHOUT HAVING TO PERFORM A SYSTEM RESTORE.

Mozilla (like most developers of free software) doesn't provide telephone support. Please continue your thread at https://support.mozilla.org/en-US/questions/964377 and don't create new questions.

Problem making jackd run as user [NOT SOLVED]

Similar Messages

Maybe you are looking for