Problem monitoring idoc for some interface
Hi all
I have implemented the "Business process Monitoring" to monitor 10 interfaces.
The communication is between SAP Pi and SAP ECC. SAP PI send idocs type acc_document to SAP ECC. I would to monitor the status of inbound-idoc in SAP ECC System for all interface so I have created 10 Customize Monitoring Object in SAP ECC with transaction BDMO using for the filed
u201CMessage Typeu201D acc_document. The problem is that all interfaces use acc_document so if the idoc of interface 1 generate the error this error is detect to all interface. So, how can I monitor those interfaces correctly?
Thanks a lot for collaboration
Hi Maurizio
Is it impossible to distinguish IDOC content by partner number ?
By the way, it seems you use old technique. In latest BPMon, you can use application monitor for IDoc monitoring.
In more detail, please download the document of IFMon from following link.
http://www.service.sap.com/bpm
=>Media Library
=>Technical Information about "Setup Guide - Interface Monitoring "
=>Customer Information "Interface Monitoring - Overview "
Best Regards
Keiji
Similar Messages
-
Hi experts,
I have an requirement , when I change any infotype record from pa30 or pa40, i.e
suppose I am changing the infotype 0002 in pa30 , the idoc only generated for that changed infotype only,
but I need it to generate the idoc for some other infotypes also I.e(0000,0002,t528t, 0016).
So please give me some help to generate idoc when I run a rbdmidoc(bd21).
Thanks in advance.
Venkatyes, visible bounds is reading the non-visible masked objects too.
you're going to have to do it the hard way, loop through all your objects to get your bounds manually, and while you're at it, test for clipping masks and use the masking path instead. -
LMS4.1 how to suppress operationallydown events for some interfaces
Hi,
Installed Cisco Prime LMS last week. Everthing seems to be running fine. We configured LMS to send e-mail for certain events. One of them is operationallydown/up events. There are some devices for which we only want to see those events for some of the interfaces. For example: there is a device with several ISDN interfaces. Those are used by business partners to dial-in. We expect those interfaces to go up and down several times per day. We don't want any events/e-mails for that. I can't seem to figure out how to configure that. If anyone can help me with that, it would be greatly appreciated.
We come from LMS2.6, but didn't do an upgrade. It's a big leap, everything works different now.
Regards,
Arjan HummelOperation down events a usually due to admin up, line protocol down interfaces. The only way to fix that is to put the interface admin down
When you talk about BRI or PRI channels its a different story
Look at NMSROOT/objects/smarts/conf/discovery/tpmgr-param.conf.
Add a line like this, but with the sysobjectid of your device.
IFDescrPattern-.1.3.6.1.4.1.9.1.1045 ~*Bearer*
Something like this should work, but you need to rediscover the device.
Cheers,
Michel -
Where are the implementations for some interfaces in the search_sdk.jar?
Hi,
Is the source code for the implementation of some interfaces (DocumentMetadata etc) available to public?
Thanks.
Jun
Message was edited by:
AlwaysthinkSource code is not available. The javadoc is distributed with the installation media. On my machine I can find the javadoc for DocumentMetadata here:
file:///F:/SES_1018_WIN32_DVD2/doc/search.1018/b32260/toc.htm -
Problem with IDoc for an outbound delivery
Dear All,
I am facing a problem with the IDoc defined for an outbound delivery.
Scenario:
Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
What I did:
I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
What I can do:
I can issue an IDoc message, it looks ok and contains the standard data.
Problem:
It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
Am I using the proper exit? I appreciate any suggestions.
Thanks,
Grzegorz SkorusHello Grzegorz
Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases, it may help you.
Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
Futher the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
Hope this helps and others will pitch in.
1498409 - Valuation Type unavailable when creating deliveries using IDOC
631913 - Exit after formatting delivery IDoc type DELVRY -
IMovie to iDVD shimmering problem on DVD for some photos
Created iMovie with photos and some video. Created DVD. DVD on Mac shows shimmering on some photos as well as on TV DVD player. Have asked many trainers in London Covent Garden and Regent St for solution. The answers are not consistant just try different things. They also mention other products, Toast, Final Cut and FotoMagic. Is there a definitive way to make sure the iMovies can be created without shimmering (many snow, sunshine scenes). Or product that fixes problem. Thanks in advance. Don't want to buy product and still have problem.
For future reference, this is from iTunes Help.
+_Authorizing a computer to play iTunes Store purchases_+
+To play purchases from the iTunes Store, you must authorize your computer using your iTunes Store account and password. (Authorization helps protect the copyrights of the purchased items.)+
+You can authorize up to five computers (Macintosh, Windows, or both) at a time. To play a purchased item on a sixth computer, you need to deauthorize another one. An iPod doesn't count as a computer.+
+You can authorize or deauthorize a computer at any time. Be sure to deauthorize a computer before you sell it or give it away.+
+Here are ways to authorize or deauthorize a computer:+
◼
+To authorize a computer to play iTunes Store purchases, choose Store > Authorize Computer.+
◼
+To deauthorize a computer, choose Store > Deauthorize Computer.+
◼
+To deauthorize a computer to play spoken programs purchased from the Audible website, choose Advanced > Deauthorize Audible Account.+
◼
+If you forgot to deauthorize a computer you no longer own, you can deauthorize all your authorized computers at once. You can use this method once a year.+
+Choose Store > View My Account, and then click Deauthorize All. If you don’t see this option, it’s because you don’t have five authorized computers.+ -
I am triggering My IDOC for XI interface Error passing data to port
Hi All
when i checked the partner profile , it is givng the error as this one , and i dont to how to go for this one
No Message Control entry for this entryHi Sridhar,
Cross check with this weblog:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Sachin -
Hi Gurus,
I have activates the change Pointers for generating the IDocs whenever the master dtaa is changed.
Is there any technique so that I can recive the IDocs containing only those segment's data which is relevant for me.
Abhi....The question I have asked is not related to Inbound I Docs processing.
Actually I am sending the IDocs to Non-SAP system whenever any change is made to the master data, using the Change Pointers.
Now, the situation is that the file that is getting generated contains the data corresponding to many segments. So, is it possible to restrict the segments/fields for which the data is generated.
Thanks In Advance.......
Abhi.,, -
My iPhone wont update. I've tried to restore it and update it but it still doeset work. It just keeps saying searching for update and nothing elce and I let it do that for 10 hours once so i know it's not bc if the server please help
Restore to last back up by .....first go into itunes preferances >devices and turn off automatic sync...Then connect the phone to itunes by usb cable provided in box ...once you see your phone on the left hand side (blue panel) again go into Edit>preferances>devices... and check is there an oler back up in there ....if there is go back to the blue panel where your iphone is recognised ....right click on it and click restore from back up... then pick the back up from the drop down box and back up!
Regarding sensor I dont think you will get a replacement sensor you will get a replacement unit.....Contact apple support by phone or go here...
http://https://expresslane.apple.com/GetproductgroupList.action?locale=en_GB -
Problem in Idoc creation in ME22N
Hi All,
We are facing a problem in Idoc creation in transaction ME22N.Our requirement is to trigger an output type and create a idoc everytime a change is made to a particular Purchase Order.
Presently however,for some vendors,when we change the plant at the item level,an Idoc is not created(with a message that the changes are not relevant to create an Idoc).Any other change to the Purchase Order like changes in quantity or price,results in successful Idoc creation.
We have also noticed that this happens only in the case of certain vendors.The Customer Info records and vendor data are all believed to be fine.
Are any other config settings required to be maintained for this?
Thanks in advance!
Regards,
Nejuma IqbalHi Nejuma,
I don't think there is any problem with cofiguration settings.u r getting the idocs for some vendors .
if iam not wrong u r giving LS in the tcode(we20).The method which u r using is change pointers.As u r using standard idoc all the settings will be done.
Only settings u have to do is
1>generate partner profiles(WE20)
2>Distribute model view(BD64).
REGARDS,
Nagaraj -
Problem in IDOC segment E1MTXLM
Hi all,
Basic type : MATMAS05
One of the segments is E1MTXLM has the data as below
"Heater assy., with NTC <(>&<)> protector, 240V, 3000W"
where as in the MM03 transaction Basic data text is shown as below
"Heater assy., with NTC & protector, 240V, 3000W"
I think there is problem while the IDOC is getting created but i have no idea what could be the problem.
Can any help in this regard.Hi Nejuma,
I don't think there is any problem with cofiguration settings.u r getting the idocs for some vendors .
if iam not wrong u r giving LS in the tcode(we20).The method which u r using is change pointers.As u r using standard idoc all the settings will be done.
Only settings u have to do is
1>generate partner profiles(WE20)
2>Distribute model view(BD64).
REGARDS,
Nagaraj -
IDOC for Customer Account Statement
Hi All,
I have a requirement that the Customer Statement should be sent thru and IDOC for some specific task. We are using the F.27 to print the Customer Account Statement. In the process of finding the IDOC for the same, we found FINSTA01 and Message type FINSTA will suit the requirements. Now the issue is, when i use F.27, it generates the SPOOL and starts priniting the same, insetad i need the same to initiate the IDOC. I mean the communication method to be IDOC instead of the Physical Print. Can anyone help me on how to do this? also please through some light on the things needs to be done if anyone of has come across such requirement.
Thanks in Advance.
Regards
NambiHi Thiruchudar,
There are some setup you need to do. If you're not technically well grounded, i would suggest you get an ABAPer to do this for you. Basically, the following are what you need to do:
1. Create the Partner Profile for your Customer using transaction code <b>WE20</b>. Click on the create icon and enter Partner type <b>KU</b> (Customer) and enter the Customer Number.
2. Next, add an Outbound Message Type <b>FINSTA</b> by clicking on the <b>green +</b> icon under the outbound parameters. Complete all the other mandatory fields as appropriate. Save your Entries.
3. Test your outbound partner profile for your customer by running the customer statement again using transaction code <b>F.27</b>.
Your output control would have been created with the medium EDI.
4. Use transaction code <b>WE05</b> to display the iDocs that would have been created.
<u><b>Note:</b></u> You still have to set up the communication between your system and that of your Customer to allow for EDI transmission.
I hope the above helps.
Do not forget to award the points please.
Thanks and Regards,
Jacob -
Song titles are getting cut off for some reason
I never had this problem before but for some reason the last few songs I have imported and encoded into AAC have the titles cut off after (I guess) a certain amount of characters. This has never been a problem before. Is there a preference that I need to change? I'm running 7.0.1.8 for Windows.
I have many other songs with longer titles than the latest I have uploaded. This is a strange new occurence.
Thanks in advance
E
Windows Windows XPNo one else having this problem I take it. Can't find any info regarding character length restrictions.
-
I was doing some minor editing in Logic Pro 9.1.8, like adding some plug-ins to audio and midi tracks on numerous songs. Most of the songs I had no problem bouncing. For some reason 2 of the songs I tried to bounce kept showing me this error message:
"Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number" result code=-50.
The songs open and play fine, but won't let me bounce. I've worked with Logic for a few years and this has never happened. Any suggestions?
Thanks,
JohnnyFixed! Ran disk utilities and repaired my external HD.
-
Why can't I manually fill in info for some WAV files?
I've been importing wave files into itunes and filling in the artist info manually, one cd/playlist at time, with the intent of later converting the entire library to apple lossless. I need to do it this way because importing one CD at a time, I select the whole thing, and then fill in the info for the entire selection at once. If I import a bunch of files first I get a huge disorganized mess because there is no "tag" info. The problem is that, for some reason, artist info entered manually for some WAV files "won't take" but if I change to apple lossless first it will. Can anyone suggest a reason for this inconsistant behavior in the iTunes program?
GerryWAV files don't have ID3 tags, which hold a lot of the song info.
You might want to have a look at this wikipedia entry
http://en.wikipedia.org/wiki/ID3_tag
Maybe you are looking for
-
Error in User integration with SRM
Hi Everyone, We are using SRM5.0 and Classic Scenario. We have a issue with user integration. One user for whom i am trying to integrate into SRM system but it is not integrating properly. In USERS_GEN, I am getting error as ' Assignment : Business p
-
Pdf report save in local pc as a file from oralce forms
dear all, when button pressed event : I want to save a report (pdf, xls, doc) in my local pc as a file. already i can do it in application server in different path different type of extension . and its works internally. internally i can save it as a
-
HT1353 can a generation 2 ipod touch be updated to 4.3 ios?
can a generation 2 ipod touch be updated to 4.3 ios?
-
How is Java JRE or SDK actually installed in Ubuntu?
Ive used Java since the 1990s. Its been mostly on windows that has an exe installer; But always get to this difficult part when it comes to installation. Right now under Ubuntu i am installing java runtime again, have done it before but simply cannot
-
ITunes won't add or import new files
I am running mountain lion 10.8.2 and my system is fully updated.I have my itunes library on an external drive but I am unable to add new files to iTunes. I have tried dragging and dropping and the plus appears and when I release the files I get the