Problem of Data Import/Export after migration of Oracle DB 9i to 10g

We have encountered the following problem after the migration of Oracle DB 9i to 10g R1 and ESRI ArcSDE 8.3 to 9.1.
In our development server, a view was created by joining of one feature class (point feature), two attribute tables and one F table. We have to perform a process to export all the features in that particular view from the development server and then import them to the production server. In total, there should be about 60,000 points.
Form our past experience (using Oracle DB 9i and ESRI ArcSDE 8.3); we spent about 15-20 minutes to complete the import-export procedure. However, after the system migration, the speed of the import-export procedures is extremely slow, which is talking about 2 hours for ONLY EXPORTING 5MB data.
We would like to seek advice in solving the above problems. THANKS!

Try to delete old stats, then gather new stats on the schema and try the export again.

Similar Messages

  • Has anyone had issues with Administration\Data Import/Export\Data Import???

    Has anyone had issues with Administration\Data Import/Export\Data Import???
    I have a client who has recently upgraded from V2007 to V8.81. They were succesfuly  using this standard function to import supplier prices to their master price list, but now it has failed?
    I have looked at the file they are importing and it appears to be fine.
    On closer inspection, it did contain approx 46,000 entries, so I took the first 1,000 and created a test file, which imported fine.
    The only issue I found was Speed, with the test file of 1,000 records taking about 30 Mins to import. This appeared to get slower and slower the further through the file it got!
    Based on this, I have estimated that the whole file would takle about 13 hours to import. The client say that when they used to run it on version 2007 it was far quicker?
    In practice, it does appear to run, but the speed is the issue. Having said this, I set the whole file to run last night (over night)and this morning it had appeared to hang after about 2,307 rows, with nothing else being updated.
    Has anyone any ideas or is aware of performance issues like this?
    Thanks,
    Ian

    Always an option, but would you give your clients access to this tool?
    Not sure really.
    I have uploaded a copy of their database onto my test system and run the same routine. Its equally as SLOW
    I can't gauage if its an issue with 8.81 that 2007 didn't have, as I only have the client's word on it, however I have no reason to disbelieve them.
    Kind regards,
    Ian

  • Import/ export of an object or item in portal 10g

    Good Morning!
    </p>
    can anyone tell what is the format of import / export of an object or item in portal 10g?
    <br>this is in the context of updating or rolling into production server an item whose earlier version might be sitting in the production server before. and it is based on the premise that the environment/ system is composed of more than one servers and production is only one of them.
    <br> apologies ... if i am not even phrasing the question right. by format, what i mean to know is does it first delete the older component and then generate the new one or it renegades and keeps the older version and bring on the newer version, or what.
    </p><p>
    any hints will be appreciated.
    </p>
    syed

    Kasia,
    There are a number of guides on the documentation tab for Oracle9iAS Portal that can answer your questions. Be sure to check out the FAQ!
    Rich

  • Problems adding folders as portlets after migration

    We have used the content area migration tool to migrate content areas from one Oracle Portal (3.0.66.5) instaled in Sun Solaris to another with the same version in the same platform.
    After migrating thew content area, i try to add a folder portletand when customize the folder i want to publish i retrieve the error:
    An Unhandled Exception has occurred. ORA-01403: no data found
    Could youy help me, please?
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Harry Wong ([email protected]):
    Is this happening with [b]every content area that you import?<HR></BLOCKQUOTE>
    I tried my first export/import and that is the result. Searches don't work and text items give error wws-000.
    I have shared categories and perspectives declared in shared objects.
    I don't know if this is important, but it4s the only special i have done.
    Thanks in advance
    null

  • Interface Problems: DBA = Data Pump = Export Jobs (Job Name)

    Hello Folks,
    I need your help in troubleshooting an SQL Developer interface problem.
    DBA => Data Pump => Export Jobs (Job Name) => Data Pump Export => Job Scheduler (Step):
    -a- Job Name and Job Description fields are not visible. Well the fields are there but each of them just 1/2 character wide. I can't see/enter anything in the fields.
    Import Wizard:
    -b- Job Name field under the first "Type" wizard's step looks exactly the same as in Export case.
    -c- Can't see any row under "Chose Input Files" section (I see just ~1 mm of the first row and everything else is hidden).
    My env:
    -- Version 3.2.20.09, Build MAIN-09.87
    -- Windows 7 (64 bit)
    It could be related to the fact that I did change fonts in the Preferences. As I don't know what is the default font I can't change it back to the default and test (let me know what is the default and I will test it).
    PS
    -- Have tried to disable all extensions but DBA Navigator (11.2.0.09.87). It didn't help
    -- There are no any messages in the console if I run SQL Dev under cmd "sqldeveloper\bin\sqldeveloper.exe
    Any help is appreciated,
    Yury

    Hi Yury,
    a-I see those 1/2 character size text boxes (in my case on frequency) when the pop up dialog is too small - do they go away when you make it bigger?
    b- On IMPORT the name it starts with IMPORT - if it is the half character issue have you tried making the dialog bigger?
    c-I think it is size again but my dialog at minimum size is already big enough.
    Have you tried a smaller font - or making the dialogs bigger (resizing from the corners).
    I have a 3.2.1 version where I have not changed the fonts from Tools->Preferences->CodeEditor->Fonts appears to be:
    Font Name: DialogInput
    Font size: 12
    Turloch
    -SQLDeveloper Team

  • Problem with Java Native Type after Migration from 7.0 to 7.1

    Hi,
    after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
    FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.     
    What have I done wrong?
    How could I fix this problem?
    Best regards,
    Peter

    Hi,
    thanks, this solved the problem.
    Thank you.
    Best regards,
    Peter

  • Date of alerts after migration

    After migration - restore of backup (from 2.6 to 4.0), alerts are restored, but not with original date of creation on old system, but all of them with same date&time of restoration on new system? Can it be fixed somehow?

    Alerts will migrate along with data. Couple of things make sure after upgrade.
    Your WFE servers are in exchange relay to send emal to out of network users.
    If URL of web application / site collection change then some case you have to update the url.
    It is highly recommended that test your migration before performing in production.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Aperture locks up on import/export after Mavericks

    Since I upgraded to Mavericks and the corresponding version of Aperture, I have gotten persistent Aperture lockups. When I say "lockups" I mean the spinning beachball of death, and I have to force quit the "not responding" Aperture.
    I've tried command-option launching Aperture and repairing or rebuilding the database.
    I've tried safe booting, and creating a new user and a "clean" account.
    Importing: I can import files from my camera's memory card. However, if I try to select a folder of images on my desktop, it locks up. The folder contains nothing but JPEGs.
    Exporting: I've been able to export images. I've had lockups when trying to export MOVs. I also had a lockup when trying to "consolidate originals" so I could migrate all of my images out of Aperture and into Lightroom.
    I have tried various search terms in Google to see if this is a known problem but haven't found anything that seems to be import/export specific, or that can't be fixed with a database rebuild.
    Any help would be appreciated. Thanks in advance.

    Barring any solutions to this problem, my workaround was as follows:
    Open Aperture Library via "View Package Contents" in Finder
    Pull all of my files out.
    Use Lightroom instead
    I lost all of my albums and project organization, and Aperture adjustments of course, but at least I have my photos back.

  • Problem in displaying Thai fonts after migrating from Reports 2.5 to 6i

    Hi,
    We have recently migrated our reports from Reports 2.5 to 6i.
    When we were using Reports 2.5, we could display The Thai Fonts correctly, but after migrating to 6i, the data retrieved from database is being displayed as junk characters.
    In Reports 2.5 we had set a registry variable ORA_CHARSET_CONVERSION to NO_CHARSET_CONVERSION. We were using NLS_LANG as AMERICAN_AMERICA.WE8IS08859P1 in 2.5.
    If we change WE8IS08859P1 to US7ASCII for Reports 6i, the data retrieved from database is being displayed correctly in Thai fonts, but the labels become junk characters.
    Do we need to do any special setup in 6i?
    Nigam.

    Hi All,
    Whilst doing the migration (and god knows how long this will take) I need to document the log file of all functions and changes made. The manual states that there is a PLG file created however, I can't seem to find it. I'm running the conversion one by one and not in batch mode. Can someone help me locating the PLG log file.
    Thanks

  • Problem with 8.1.6 after migrating to Tru64 5.1A

    We just migrate our OS from Tru64 4.0G to Tru64 5.1A.
    Our database are 8.1.6.3.1.
    After migration the OS we had problem (ORA-07445) with some of our database. It seems that the problem is related to direct IO and a workaround is to set the DISK_ASYNCH_IO parameter to FALSE.
    What is the impact of setting this parameter to false ? Should I expect a big decrease in performance ?
    Does anybody know if there is a patch for Tru64 5.1 that woudl correct this problem ?
    Thanks

    After having a closer look at metalink it seems to be obvious, that Forms 6i (8.0.6.) only supports user exits generated with the 8.0.6. precompiler.
    If this is the case new questions follow:
    Is there a way to get a 8.0.6. precompiler?
    Is it possible to connect to a 8.1.5. database with such a user exit? Does anybody have corresponding experiences?
    Our customer uses a 8.1.7. database. What about connecting to that database with the user exit?
    /Ralph

  • Problems with data import to Static view object... Need help...

    Hi! I have problem when I import data to my Static View object from *.csv.
    I followed tutorial - http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcquerying.htm#CEGCGFCA
    Lets take a look to Figure 5-14 Sample Data Ready to Import from CSV Flat File. There are 3 columns. For Example in column C I have only lines. Bun in A and B column I have all 5 lines. I want to import data from one CSV file. So when I imported data and have some empty fields in column C. When I create SelectOneChoice object in my form, and run it, then it takes also empty fields as choices in my SelectOneChoice object. It is when I create Select one choice from column C Why it is so? And what to do?
    Waiting for response from anyone...
    Best regards!

    HI! Can someone give me opinion on my problem?
    Best regards

  • Problems with new iMac (Alu) after Migration with the Bluetooth settings

    Hallo, at first, apology for my bad English
    I have bought a new iMac 24". After Migration of my datas from my "old" one (iMac 20" C2D) it works all very fine. The only thing that don´t work is the Bluetooth Settings. When i want to install a new device, there is no text in the Window, only a few characters...
    Can anyone help me??

    Try downloading and installing the 10.4.10 Combo update. Let the update run alone. Don't use the Mac for anything else while it installs the update, including Airport and Bluetooth. Use a wired keyboard and mouse if you can.
    Mac OS X 10.4.10 Combo Update v1.1 (Intel)
    Repair Disk Permissions after the update is installed and you have restarted the Mac.

  • Data Import/Export Tool

    Hello Experts,
    I would like to have your views on Data import function (not DTW) in SAP.  Does this functionality have any data integrity issue ? My client likes to use this function to import business partners using Excel rather than DTW.
    What is the difference ? Are there any known issues ? Is it not supported by SAP ?
    Await your response on this.
    regards
    Johnson

    Hi Johnson,
    please have a look at this wiki:
    [Differences between the Import From Excel and Data Transfer Workbench templates and what happens when they are interchanged. |https://wiki.sdn.sap.com/wiki/display/B1/DifferencesbetweentheImportFromExcelandDataTransferWorkbenchtemplatesandwhathappenswhentheyare+interchanged.]
    All the best,
    Kerstin

  • Performance issue with view selection after migration from oracle to MaxDb

    Hello,
    After the migration from oracle to MaxDb we have serious performance issues with a lot of our tableview selections.
    Does anybody know about this problem and how to solve it ??
    Best regards !!!
    Gert-Jan

    Hello Gert-Jan,
    most probably you need additional indexes to get better performance.
    Using the command monitor you can identify the long running SQL statements and check the optimizer access strategy. Then you can decide which indexes might help.
    If this is about an SAP system, you can find additional information about performance analysis in SAP notes 725489 and 819641.
    SAP Hosting provides the so-called service 'MaxDB Migration Support' to help you in such cases. The service description can be found here:
    http://www.saphosting.de/mediacenter/pdfs/solutionbriefs/MaxDB_de.pdf
    http://www.saphosting.com/mediacenter/pdfs/solutionbriefs/maxDB-migration-support_en.pdf.
    Best regards,
    Melanie Handreck

  • Unable to connect to database after migration from oracle 8 to 9i

    Hi,
    Our applications database was migrated from oracle 8 to oracle9i, The oracle_home path was updated to the newer version.
    While accessing the databese using the new setup we are facing SQLLIB mismatch problem
    the description of error is as follows
    =======================================================
    SQL-02107 Program too old for runtime library; please re-precompile it
    Cause: Your program was precompiled by an older version of the Oracle Precompilers, which is incompatible with this release of SQLLIB.
    Action: Precompile the program with a newer version of the Oracle Precompilers
    =========================================================
    Please help in this regard
    ~akhil

    Hi Akhil,
    Looks like some Tuxedo services are using Pro*C code. Therefore, you would need to recompile your Pro*C code using the newer compiler and then rebuild the Tuxedo servers.
    HTH,
    Ravi...
    Hi,
    Our applications database was migrated from oracle 8
    to oracle9i, The oracle_home path was updated to the
    newer version.
    While accessing the databese using the new setup we
    are facing SQLLIB mismatch problem
    the description of error is as follows
    ======================================================
    =
    SQL-02107 Program too old for runtime library; please
    re-precompile it
    Cause: Your program was precompiled by an older
    version of the Oracle Precompilers, which is
    incompatible with this release of SQLLIB.
    Action: Precompile the program with a newer version
    of the Oracle Precompilers
    ======================================================
    ===
    Please help in this regard
    ~akhil

Maybe you are looking for

  • MSI GeForce 3 Ti200 video out freezes

    Hi! I was testing the composite video and s-video out connectors. In my properties for the GeForce card i can choose between s-video and composite video, but they aren't automatically discovered as connected when pressing that button. However when i

  • Documentation in sap XI

    Hello, I want to learn from your experience. I end a scenario, When I try the scenario and the scenario works perfectly. Now I need to document the scenario. I want to now how do you do this, do you have any templates for that? Do you use inside sap

  • Where are my movies!?

    Hello, I like to keep as much data as possible off my MacBook Air and onto my server.  When I click on the "Apple" in the top left, then "About This Mac" followed by "More Info" and lastly, "Storage" my MacBook Air tells me I have 7GB of Movies on my

  • New Windows refugee needs help on new Mac

    Does Apple offer a Windows Keyboard commands to Mac keyboard commands glossary? Many Windows keyboard commands have completely different functions on a Mac. I want to learn. Any help appreciated.

  • Backwards hebrew in text input

    I'm making a 'contact us' page for my website. the website is in hebrew. the problem is, when ppl try to write something, the words get wreten in backwards. for example: hello I am Tal = Tal am I Hello (But in hebrew) what can I do to fix it?