Problem opening file in application server received by FTP.

Hi,
I am using FTP_COPY to receive file in application server.
I am receiving file from FTP but I am unable to open them because the mode was set as 640 as in attributes.
Could you please help me in how to receive in readable format...
Any suggestions to use FTP commands?
Thanks in advance.

If you do not have authorizations to open the file its easy: there is nothing you can do except contact the ftp admin.

Similar Messages

InfoSpoke fails with message "Could not open file on application server"

BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.

Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help.

Need to save a file on Application server, receiving error.

Hello,
I want to save a file on Application server.
I have data in the final output table gt_out_chng.
I want to write a file in the application server and this is the
code that written,
data : MY_NEW_FILE type file.
        MY_NEW_FILE = '/tmp/test.txt'.
data: gv_output(255) type c,
      P_FILE TYPE rlgrap-filename.
   p_file = 'F:\USR\SAP\PUT'.
CONCATENATE p_file '\' sy-datum sy-uzeit '.txt'
                             INTO p_file.
OPEN DATASET 'P_FILE' IN TEXT MODE FOR OUTPUT
                                  ENCODING DEFAULT.
IF SY-SUBRC = 0.
LOOP AT GT_OUT_CHNG INTO WA_OUTPUT_TAB.
TRANSFER WA_OUTPUT_TAB TO 'P_FILE'.
CLEAR WA_OUTPUT_TAB.
ENDLOOP.
ENDIF.
CLOSE DATASET 'P_FILE'.
i am receiving an error message as follows :
"WA_OUTPUT_TAB" cannot be a table, a reference,
a string, or contain any of these objects.
Please correct the code if found any errors..
Any suggestions will be apprecaited!
Regards,
Kittu
Edited by: Kittu on May 15, 2009 10:27 AM

Hello,
Instead of using the following,
OPEN DATASET 'P_FILE' IN TEXT MODE FOR OUTPUT ENCODING DEFAULT.
use this,
OPEN DATASET P_FILE IN TEXT MODE FOR OUTPUT ENCODING DEFAULT.
P_FILE is your variable, do not put it in quotes
Edit: The same thing applies for your transfer and close statements
Edited by: Kris Donald on May 15, 2009 2:05 PM

Unable to Open File In Application Server

Hi All,
I have generated csv file in application Server with the help of Open HUb Destination.In Open Hub 2 files will we generated(1 is structure of the file(s_ztest),2 is data file(ztest)).When i click on the structure of the file then it is opening,but when im tryin to open data file(i,e(ztest)its giving an message like UNABLE TO OPEN THE FILE.
Please let me know how it can be opened.
Thanks In Advance,
Bobby

Hi All,
File is Opening,it was an error in filed mapping....

Problems opening files on Win2003 Server in Tiger

I posted this as a reply to another thread, but got no response; so I am posting in a new thread in hopes of getting some insight.
I am in a largely Windows-based company, but work in a small Mac-based department. We recently relocated into new offices, and the new environment is run on a Windows 2003 server (our old offices were on a Windows 2000 server).
My issue is that when I try to double-click an icon, drag an icon to the Dock, or open with keyboard shortcuts, the application launches, but either a) no file opens, b) the wrong file opens, or c) a file opens that is comprised of a single column of pixel information. The only way I can open a file is via File>Open through the application, and even that does not seem to deter problems b and c (it only works around problem a).
My computer is a PowerMac G5 running OS X 10.4.4 -- oddly, our 10.3.x users do not appear to have this issue. And I never had any problems on the W2K server. So I'm sure there's something with the new 2003 server and 10.4, but I've searched through the threads and didn't see anything exactly like my issue.
Any thoughts? Are there server settings that may have been missed by our IT department? Or is there something I need to set on my Mac? Any help would be greatly appreciated.

Hi Krishna,
try to use:
    response->set_header_field( name = 'Content-Type'
                                value = 'application/vnd.ms-excel' ).
to set the correct content type for the file (example above Excel).
Also place the coding in the OnRequest Event and not on the Layout of the page with flow logic. As an alternative you can use a controller with a controller class. In there redefine the method do_request and place the coding for creating the response therein. The coding should look similar to:
* send back the file
    response->set_header_field( name = 'Content-Type'
                                value = ls_file-content_type ).
response->delete_header_field( 'Cache-Control' ).         "#EC NOTEXT
response->delete_header_field( 'Expires' ).               "#EC NOTEXT
response->delete_header_field( 'Pragma' ).                "#EC NOTEXT
CONCATENATE 'inline; filename="' ls_file-name INTO lv_string.
response->set_header_field( name = 'Content-Disposition'
                              value = lv_string ).
response->set_data( ls_file-content ).
In the example above lv_string has type string and ls_file is a structure containing strings for name and content-type and an xstring for the file content.
I usually don't set the content length as I have enabled compression and then the icm calculates the content length for me after compression.
Hope that helps.
Best Regards
Michael

Problems opening files from Windows server

Since upgrading to Leopard, some files saved on an Windows server no longer open in the correct application. For example, documents created in Quark 6.1 or 6.5 show up as Unix Executable Files and attempt to open in the terminal. Copying the file to my desktop does not help. The files work correctly for pre-Leopard Macs. New files saved from Quark 6.5 on a machine running Leopard onto the server work fine for other Leopard Macs, but pre-Leopard Macs try to open the files with Script Editor. I can change the "Open With" preferences in a get info window for individual files, but if I select "Change All", i get an error that "not enough information is available".
Also, Photoshop EPS files created with pre CS 1 versions of Photoshop appear as Illustrator EPS files.

I'm not sure if anyone is working on it.
I did copy everything to the Mac running 10.3.9 (above I mistakenly said the computer I was going to copy to was running 10.4).
I then updated the Mac to 10.5 and all the files continued to open with the proper program even after I put them back on the server.
I know that it's a hassle, but it worked. I guess if you don't have another Mac still running 10.3, you could put everything on your server, reformat you Mac to OS 10.3.9, then copy the server to your Mac, then upgrade to 10.5. That is, if you have a large enough hard drive. I don't claim to be a Mac expert so I can't guarantee anything in this paragraph. It just seems like that would be the only logical step given what worked for me with upgrading the computer running 10.3.9. Even after doing that, I'd then do a clean install on the computer. My Mac was having problems so that's what I did and plan on doing to the other Mac when I get the chance.
I guess it all depends how many files you have and how annoyed you are at having to Control click all your files to open them.

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

Problem in Downloading File from Application Server

Hi All,
We have an Requirement that, iam putting the Flat File
( Output Of a Report ) in to the
Application Server(AL11) By using the OpendataSet, Transer , Close DataSet.
When iam trying to Downloading the Flat File through the FM, GUI_DOWNLOAD, the Data is coming Correctly.
But the Problem is , when trying to Downloading through AL11 i.e System -> List -> Local File it is not coming Correctly.
( Java People is going to Connect with the Application Server for the Flat File )
Kindly Clarify the Problem.
Points will be Rewarded.
Regards,
Kiran.I

Hi nl,
1. this program will display
   selection screen
and ask two things :
a) application server filename
b) local file name
2. then it will download the file
(the file name is CASE Sensitivie)
3. just try it (just copy paste )
*& Report YBCR_FILEDOWNLOAD                                           *
REPORT ybcr_filedownload                       .
DATA
DATA : file_name TYPE string.
DATA : BEGIN OF itab OCCURS 0,
       ln(255) TYPE c,
       END OF itab.
SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : appfn(150) TYPE c LOWER CASE OBLIGATORY.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
    IMPORTING
      file_name = p_file.
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
OPEN DATASET appfn FOR INPUT IN TEXT MODE ENCODING DEFAULT .
IF sy-subrc <> 0.
    MESSAGE s999(yhr) WITH 'COULD NOT OPEN FILE ON APP SERVER'.
    LEAVE LIST-PROCESSING.
ENDIF.
DO.
    READ DATASET appfn INTO itab.
    IF sy-subrc = 0.
      APPEND itab.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
file_name = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      filename                        = file_name
FILETYPE                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
    TABLES
      data_tab                        = itab
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards,
amit m.

Problem in uploading file from Application Server

Hi everyone,
i got a problem in uplaoding a file from application server.i am having two folder (one folder name is current and another one is processed)in application server. In current folder i am having N no of files.I want to upload all the files names into one internal table and i want to process one by one file.After processing each file the file should be moved to processed folder and the files should not exist in current folder.All these process must be done everyday.Please rectify my problem asap.

Ramesh,
Take authorization from basis guy.
Use the below code to get the list of files from require directory
*& Report ZDIRFILES                                                   *
REPORT ZDIRFILES    .
PARAMETER: p_fdir            type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
        include structure salfldir.
data: end of it_filedir.
*START-OF-SELECTION
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
       exporting
            name     = p_fdir
       tables
            file_tbl = it_filedir.
Now in internal table "it_filedir" will have all your files.
For moving and deleting
report zrich_0001.
Parameters: d1 type localfile default '/usr/sap/TST/SYS/fld1/Data1.txt',
            d2 type localfile default '/usr/sap/TST/SYS/fld2/Data1.txt'.
data: begin of itab occurs 0,
      rec(20) type c,
      end of itab.
data: wa(20) type c.
start-of-selection.
open dataset d1 for input in text mode.
if sy-subrc = 0.
    do.
      read dataset d1 into wa.
      if sy-subrc <> 0.
        exit.
      endif.
      itab-rec = wa.
      append itab.
    enddo.
endif.
close dataset d1.
open dataset d2 for output in text mode.
loop at itab.
    transfer itab to d2.
endloop.
close dataset d2.
delete dataset d1.
Check below FM if required
To move the file to archive directoryuse FMs 'PFL_COPY_OS_FILE'
To Delete 'EPS_DELETE_FILE'.
Don't forgot to reward if useful

Problem in reading file from application server

while reading the file from application server i am succesful in reading from dataset but the program gets terminated giving a runtime error "CONVT_CODEPAGE".
the code written is as below :
open dataset d1 for input in text mode encoding default.
IF sy-subrc NE 0.
EXIT.
ENDIF.
do.
                Read dataset d1 into btab.
     if sy-subrc <> 0.
     exit.
               else.
               condense btab NO-GAPS.
               wtt_text-text1 = btab-wa+0(10).
               wtt_text-text2 = btab-wa+10(1).
               wtt_text-text3 = btab-wa+11(3).
              append wtt_text.
              clear wtt_text.
              wt_counter = wt_counter + 1.
              ENDIF.
enddo.
write : /10 ' number of records :'.
write : wt_counter.
kindly help me asap.
regards,
rachu.

If I am not wrong you are working on a Unicode enabled system. That is why this error is coming.
Look at the link below, where the solution is provided.
http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c554dcb3dc11d5993800508b6b8b11/content.htm
open dataset DSN in text mode for output encoding utf-8.
Regards,
Ravi
Note - Please close the thread by selecting PROBLEM SOLVED against the answer which helped your most, if the issue is resolved.

Open hub error when generating file in application server

Hi, everyone.
I'm trying to execute an open hub destination that save the result as a file in the application server.
The issue is: in production environment we have two application servers, XYZ is the database server, and A01 is the application server. When I direct the open hub to save file in A01 all is working fine. But when I change to save to XYZ I´m getting the following error:
>>> Exception in Substep Start Update...
Message detail: Could not open file "path and file" on application server
Message no. RSBO214
When I use transaction AL11, I can see the file there in XYZ filesystem (with data and time correspondent to execution), but I can´t view the content and size looks like be zero.
Possible causes I already checked: authorization, disk space, SM21 logs.
We are in SAP BW 7.31 support package 6.
Any idea what could be the issue or where to look better?
Thanks and regards.
Henrique Teodoro

Hi, there.
Posting the resolution for this issue.
SAP support give directions that solved the problem. No matter in which server (XYZ or A01) I logon or start a process chains, the DTP job always runs in A01 server, and it causes an error since the directory doesn´t exist in server XYZ.
This occurs because DTP settings for background job was left blank. I follows these steps to solve the problem:
- open DTP
- go to "Settings for Batch Manager"
- in "Server/Host/Group on Which Additional Processes Should Run" I picked the desired server
- save
After that, no matter from where I start the open hub extraction, it always runs in specified server and saves the file accordingly.
Regards.
Henrique Teodoro

Unable to create a file in Application Server using OPEN DATASET stattement.

I am unable to create a file in Application Server using the following statement.
OPEN DATASET filename FOR OUTPUT
IN TEXT MODE ENCODING DEFAULT
MESSAGE msg.
The message I'm getting is "Permission Denied". I have checked authorisation using SU53 which says "The last authorization check was successful". Please help.

You can use following code to capture the error.
TRY.
      OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
      CATCH CX_ROOT
      INTO EXCEPTION.
      CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
        RECEIVING
        RESULT = V_MSG.
      MESSAGE v_msg
      TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES   Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful.

Problem of Delete and Overwrite XLS file on Application Server

Hi Experts,
     I want to transfer file on application server using below code and try to delete after successfully transfer on application file to other location.
I have problem during deleting file and overwrite file.
DATA: G_S_FILE TYPE EPSFILNAM,
      G_S_DIR TYPE EPSDIRNAM,
      G_T_FILE TYPE EPSFILNAM,
      G_T_DIR TYPE EPSDIRNAM.
DATA : DELFILE(60).
G_S_FILE = '1400000051.XLS'.
G_S_DIR = '\\Dev\PO\'.
G_T_FILE = '1400000051.XLS'.
G_T_DIR = '\\Dev\PO\bkup'.
DELFILE = '\\Dev\PO\1400000051.XLS'.
CALL METHOD CL_CTS_LANGUAGE_FILE_IO=>COPY_FILES_LOCAL
    EXPORTING
      IM_SOURCE_FILE           = G_S_FILE
      IM_SOURCE_DIRECTORY      = G_S_DIR
      IM_TARGET_FILE           = G_T_FILE
      IM_TARGET_DIRECTORY      = G_T_DIR
      IM_OVERWRITE_MODE        = 'S'
    EXCEPTIONS
      OPEN_INPUT_FILE_FAILED   = 1
      OPEN_OUTPUT_FILE_FAILED = 2
      WRITE_BLOCK_FAILED       = 3
      READ_BLOCK_FAILED        = 4
      CLOSE_OUTPUT_FILE_FAILED = 5
      OTHERS                   = 6.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OPEN DATASET DELFILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC = 0.
    DELETE DATASET DELFILE.
ELSE.
    WRITE / 'File not found'.
ENDIF.
Thanks,
Himanshu Patel.

Write a Java program using Apache POI that reads in a tab delimited file and outputs an xls file (in what they call Horrible Spread Sheet Format. Create your tab delimited file and then run your Java program using appropriate OS commands.
Jelena Perfiljeva wrote:
In all honesty, I find it hard to believe other application can't accept any other format. It's actually seems rather unreasonable to expect an ERP system to create a file in an outdated format of a desktop software. Even Excel itself can open many formats, so this just doesn't make any sense.
This.
Unless you can explain exactly why the destination must be xls and no other format is acceptable, I'm going to close the thread. What is this third party tool? Why can it only read the obsolete xls file format.
I'm going through this thread and rejecting all the responses that attempt a solution that isn't xls.
I'm surprised that the OP thought that simply saving with an xls file extension would cause some magic to happen and produce an actual Excel file.

Japanese character problem while downloading file to application server

Hello All,
We are facing a strange problem while downloading a file to application server when file contains japanese text.
We are downloading vendor and customer information in a flat file format on application server. When the login language is EN program show ouput in a properly formatted manner.
When the login language is JA (japanese) program does download file with customer vendor data. I can see the description is japanese language but the formatting is gone for a toss.
We are facing similar issue with other programs downloading files on the application server.
I am using OPEN DATASET........ENCODING DEFAULT. and working on unicode enabaled ECC 6.0 system
Quick help appriciated.
Thanks!

Hi
Sometimes this also happens because of your desktop setting.Make sure that your OS also supports the JAPANESSE language.
Ask your technical support team to enable them in your desktop.
Thanks & Regards
Jyo

Problem during retriving file from application Server

Hi all,
i am trying to upload a world file (from desktop ) on application server and
retrieve it back on local desktop.
during retrieval of file from application server i am getting all the data in encoded format .
i am using -
open DATASET p_fpath for output in text mode encoding UTF-8 WITH SMART LINEFEED.
plz help.

Hi,
use the tcodes CG3Y and
CG3Z
Or
try with this command
open DATASET p_fpath for output in text mode encoding default.
Regards,
nagaraj

Problem opening file in application server received by FTP.

Similar Messages

Maybe you are looking for