Problem reading a vi's description property in an executable
Hi guys
I run into a very strange problem. I have a vi (attached) which reads the description property of a vi. The vi is inside a llb. I use the function "current vi's path", strip it and then build a new path with the name of a vi which is in the same llb. When I run my program in the IDE it works without any problem, but if I build the executable it doesn't work anymore. I logged all the paths - all of them are correct, but I don't get the description property of the necessary vi.
Basically I have the toplevel-vi in llb 1, the attached vi in llb 2 and it is used in another vi which is called in the toplevel-vi and located in llb3.
Is there anyone who could help me out?
Many thanks in advance.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
GetAblaufDescription.vi 11 KB
Hi Mike
Yes, I know. As I wrote all the paths are correct, otherwise I would get an error when opening the vi-reference (Err 7 - file not found). I am wondering why I can read the description property but don't get any text.
As mentioned in my first post all works correctly if I let the program run in development mode. If I run the exe I don't get anything.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Similar Messages
-
Antenna - problem reading in a property value from the build.xml file
Hi
I have declared a property in build.xml file of my project like
<property name="debug" value="true" />I want to read the value of this property in my source code like
//#if debug == "true"
//#endifAbove method doesnt work. I tried using method below but it didnt work as well
//#if ${debug} == "true"
//#endifCan anyone please help me how can i read this value?
Thank youyou can get your key bytes with byte [] keyBytes = mykey.getEncoded();
and then write your byte array in a file.
to get back your key :
SecretKey myKey = new SecretKeySpec(keyBytes,"TripleDES"); -
S.O.S. - I have a problem reading an XML to save it in a database
I have a problem reading an XML I trying to save the data in a database. In a log cuardo the message as text and is correct, but I do not type in the database
Glassfish give me this error in the log:
HTTPBC-E01052: The value set on the org.glassfish.openesb.address.url normalized message property is invalid. This property is expected to be of String type only.
Accepted the message in DBBC Binding. 99574032187979-45019-134439471876390116
Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
Pattern for exchange Id 99574032187979-45019-134439471876390116 is http://www.w3.org/2004/08/wsdl/in-out.
Gettin bean for {http://j2ee.netbeans.org/wsdl/bd}serviceport
Adding reply listener for messsage exchange:99574032187979-45019-134439471876390116
Received in-out message 99574032187979-45019-134439471876390116.
Using Jndi Name:: jdbc/logger
Executing SQL....insert into dbo.appender (timestamp,mensaje) values (?,?)
BPCOR-6151:The process instance has been terminated because a fault was not handled; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null
com.sun.jbi.engine.bpel.core.bpel.exception.StandardException: BPCOR-6174:Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE}MapeoPE) at line 39
BPCOR-6129:Line Number is 37
BPCOR-6130:Activity Name is Assign1
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.createVirtualFaultUnit(BPELInterpreter.java:234)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:202)
at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:98)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:1046)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:278)
at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:1293)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processStatus(BPELSEInOutThread.java:590)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:292)
at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:193)
normalized message
Finished processing outbound messages.
Accepted the message in DBBC Binding. 99574032187979-45019-134439471876390116
Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
Accepted message with exchange ID 99574032187979-45019-134439471876390116 in DBBC outbound message processor.
Pattern for exchange Id 99574032187979-45019-134439471876390116 is http://www.w3.org/2004/08/wsdl/in-out.
Gettin bean for {http://j2ee.netbeans.org/wsdl/bd}serviceport
Adding reply listener for messsage exchange:99574032187979-45019-134439471876390116
Received in-out message 99574032187979-45019-134439471876390116.
Finished processing outbound messages.
I take data from a XML and I put in two tables in a database. I do not understand what it is the problem.
The main BPEL is this:
<?xml version="1.0" encoding="UTF-8"?>
<process
name="MapeoPE"
targetNamespace="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE"
xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:sxt="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Trace"
xmlns:sxed="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Editor"
xmlns:tns="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE" xmlns:sxxf="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/XPathFunctions" xmlns:ns0="http://j2ee.netbeans.org/xsd/tableSchema" xmlns:ns1="http://java.sun.com/xml/ns/jaxb" xmlns:ns2="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab">
<import namespace="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" location="PollInPE.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" location="recumat_htor2-siglo_ped_ext_cab.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" location="recumat_htor2-siglo_ped_ext_lin.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" location="localhost_9080/bitacoraService/bitacoraPort.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<partnerLinks>
<partnerLink name="siglo_ped_ext_cab" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
<partnerLink name="siglo_ped_ext_lin" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
<partnerLink name="log" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" partnerLinkType="tns:bitacora" partnerRole="bitacoraPortTypeRole"/>
<partnerLink name="Entrada" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" partnerLinkType="tns:PollInPE" myRole="FileInboundPortTypeRole"/>
</partnerLinks>
<variables>
<variable name="BitacoraOperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" messageType="tns:bitacoraOperationRequest"/>
<variable name="InsertOutSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:insertRetMsg"/>
<variable name="InsertInSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:inputMsg"/>
<variable name="InsertOutSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:insertRetMsg"/>
<variable name="InsertInSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:inputMsg"/>
<variable name="PollIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" messageType="tns:PollInputMessage"/>
</variables>
<sequence>
<receive name="Receive1" createInstance="yes" partnerLink="Entrada" operation="poll" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" portType="tns:FileInboundPortType" variable="PollIn"/>
<assign name="Assign2log">
<copy>
<from>string($PollIn.part1)</from>
<to variable="BitacoraOperationIn" part="part1"/>
</copy>
</assign>
<invoke name="log" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
<assign name="Assign1">
<copy>
<from>$PollIn.part1/ns1:ORDERS/@numero</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_numero_pedido</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@FechaPedido</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_pedido</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@FechaEntrega</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@Observaciones</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_observaciones</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@ejercicio</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ejercicio</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/@Funcion)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_funcion</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@tipoPedido</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_tipo_pedido</to>
</copy>
<copy>
<from>string($PollIn.part1/ns1:ORDERS/@condFacturar)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_condfacturar</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_usuario_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@tipo</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_tipo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@valor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_valor</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@codigo)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ped_ext_cab_pk</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contrato_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@Expediente</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_expedte</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@CCA</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_cca</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_empresa_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@CIF</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cif</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreComercial</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_comerc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANDestino</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_dest</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreFiscal</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_fiscal</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANvendedor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_vend</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANEmisor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanemis</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANQpide</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanqpide</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANAqsf</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanaqsf</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroSerie)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_serie</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLinea</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_numero_linea</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLote)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_lote</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroAlbaran)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_albaran</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@fechaAlbaran</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_albaran</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@valorarAlbaranes)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_valorar_albar</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@CantidadCompra</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_compra</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@Observaciones</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_observaciones</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadPendiente</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_pendiente</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadAnulada</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_anulada</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@precio</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_precio</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@CIP</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_cip</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@marca</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:spl_produ_marca</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@refFabricante</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_refabric</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@modelo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_modelo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_producto_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoLocal</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_loc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoSAS</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_sas</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadMedida</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_medida</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_contra</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_artgenerico_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_presentac_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@codigoEAN</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pre_cod_ean</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@refDistribuidor</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ref_distribuid</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_oferta_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@factorContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_factor_contrat</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadEnUnidades</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_en_unds</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_contrata</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_linprogent_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@cantidad</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@fecha</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entrega_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@EANReceptor</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ean_receptor</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entre_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_origen_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_lin_solic_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ped_ext_lin_pk</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pec_ped_ext_cab_pk</to>
</copy>
</assign>
<invoke name="Invoke_SIGLO_PED_EXT_CAB" partnerLink="siglo_ped_ext_cab" operation="insert" portType="ns2:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_CAB" outputVariable="InsertOutSIGLO_PED_EXT_CAB"/>
<invoke name="Invoke_SIGLO_PED_EXT_LIN" partnerLink="siglo_ped_ext_lin" operation="insert" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" portType="tns:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_LIN" outputVariable="InsertOutSIGLO_PED_EXT_LIN"/>
</sequence>
</process> Thanks in advance!!!
&nI change the bpel to this:
<?xml version="1.0" encoding="UTF-8"?>
<process
name="MapeoPE"
targetNamespace="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE"
xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:sxt="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Trace"
xmlns:sxed="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/Editor"
xmlns:tns="http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE" xmlns:sxxf="http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/XPathFunctions" xmlns:ns0="http://j2ee.netbeans.org/xsd/tableSchema" xmlns:ns1="http://java.sun.com/xml/ns/jaxb" xmlns:ns2="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab">
<import namespace="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" location="PollInPE.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" location="recumat_htor2-siglo_ped_ext_cab.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" location="recumat_htor2-siglo_ped_ext_lin.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<import namespace="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" location="localhost_9080/bitacoraService/bitacoraPort.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
<partnerLinks>
<partnerLink name="siglo_ped_ext_cab" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
<partnerLink name="siglo_ped_ext_lin" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" partnerLinkType="tns:jdbcpartner" partnerRole="jdbcPortTypeRole"/>
<partnerLink name="log" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" partnerLinkType="tns:bitacora" partnerRole="bitacoraPortTypeRole"/>
<partnerLink name="Entrada" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" partnerLinkType="tns:PollInPE" myRole="FileInboundPortTypeRole"/>
</partnerLinks>
<variables>
<variable name="BitacoraOperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" messageType="tns:bitacoraOperationRequest"/>
<variable name="InsertOutSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:insertRetMsg"/>
<variable name="InsertInSIGLO_PED_EXT_LIN" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" messageType="tns:inputMsg"/>
<variable name="InsertOutSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:insertRetMsg"/>
<variable name="InsertInSIGLO_PED_EXT_CAB" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_cab" messageType="tns:inputMsg"/>
<variable name="PollIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" messageType="tns:PollInputMessage"/>
</variables>
<faultHandlers>
<catchAll>
<sequence name="Sequence1" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
<assign name="Assign2log">
<copy>
<from>string($PollIn.part1)</from>
<to variable="BitacoraOperationIn" part="part1"/>
</copy>
</assign>
<invoke name="log" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
</sequence>
</catchAll>
</faultHandlers>
<sequence>
<receive name="Receive1" createInstance="yes" partnerLink="Entrada" operation="poll" xmlns:tns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" portType="tns:FileInboundPortType" variable="PollIn"/>
<sequence name="Sequence1bis" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
<assign name="bisAssign2log">
<copy>
<from>string($PollIn.part1)</from>
<to variable="BitacoraOperationIn" part="part1"/>
</copy>
</assign>
<invoke name="bislog" partnerLink="log" operation="bitacoraOperation" xmlns:tns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" portType="tns:bitacoraPortType" inputVariable="BitacoraOperationIn"/>
</sequence>
<empty name="HastaAquiVa"/>
<assign name="Assign1">
<copy>
<from>$PollIn.part1/ns1:ORDERS/@numero</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_numero_pedido</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@FechaPedido</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_pedido</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@FechaEntrega</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_fecha_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@Observaciones</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_observaciones</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@ejercicio</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ejercicio</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/@Funcion)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_funcion</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@tipoPedido</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_tipo_pedido</to>
</copy>
<copy>
<from>string($PollIn.part1/ns1:ORDERS/@condFacturar)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_condfacturar</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_usuario_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@tipo</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_tipo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Usuario/ns1:Contacto/@valor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contacto_valor</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@codigo)</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_ped_ext_cab_pk</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Procedimiento/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_proced_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contrato_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@Expediente</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_expedte</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Contrato/@CCA</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_contr_cca</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_empresa_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@CIF</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_cif</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreComercial</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_comerc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANDestino</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_dest</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@nombreFiscal</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_nom_fiscal</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Empresa/@EANvendedor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_emp_ean_vend</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@id</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orgestor_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANEmisor</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanemis</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANQpide</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanqpide</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:OrganoGestor/@EANAqsf</from>
<to>$InsertInSIGLO_PED_EXT_CAB.part/ns0:siglo_ped_ext_cab_Record/ns0:pec_orges_eanaqsf</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroSerie)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_serie</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLinea</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_numero_linea</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroLote)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_lote</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@numeroAlbaran)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_num_albaran</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@fechaAlbaran</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_albaran</to>
</copy>
<copy>
<from>number($PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@valorarAlbaranes)</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_valorar_albar</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@CantidadCompra</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_compra</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@Observaciones</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_observaciones</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadPendiente</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_pendiente</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@cantidadAnulada</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_anulada</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@precio</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_precio</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@CIP</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_cip</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@marca</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:spl_produ_marca</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@refFabricante</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_refabric</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@modelo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_produ_modelo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Producto/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_producto_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoLocal</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_loc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@codigoSAS</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_codigo_sas</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadMedida</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_medida</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@unidadContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_art_und_contra</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Articulo/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_artgenerico_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_presentac_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@codigoEAN</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pre_cod_ean</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/@refDistribuidor</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ref_distribuid</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_oferta_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@factorContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_factor_contrat</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadEnUnidades</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_en_unds</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:InfLogistica/ns1:Oferta/@cantidadContratacion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_contrata</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_linprogent_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@cantidad</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_cant_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:ProgramacionEntregas/ns1:Entregar/@fecha</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_fecha_entrega</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entrega_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@EANReceptor</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ean_receptor</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:PuntoEntrega/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_pto_entre_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_origen_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_lin_solic_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@descripcion</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_desc</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:TipoOrigen/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_tp_origen_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_id</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/ns1:Origen/ns1:SolicitudLinea/ns1:Solicitud/@codigo</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_solicitud_cod</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/ns1:Lineas/ns1:PedidoLinea/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pel_ped_ext_lin_pk</to>
</copy>
<copy>
<from>$PollIn.part1/ns1:ORDERS/@id</from>
<to>$InsertInSIGLO_PED_EXT_LIN.part/ns0:siglo_ped_ext_lin_Record/ns0:pec_ped_ext_cab_pk</to>
</copy>
</assign>
<invoke name="Invoke_SIGLO_PED_EXT_CAB" partnerLink="siglo_ped_ext_cab" operation="insert" portType="ns2:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_CAB" outputVariable="InsertOutSIGLO_PED_EXT_CAB"/>
<invoke name="Invoke_SIGLO_PED_EXT_LIN" partnerLink="siglo_ped_ext_lin" operation="insert" xmlns:tns="http://j2ee.netbeans.org/wsdl/recumat_htor2-siglo_ped_ext_lin" portType="tns:jdbcPortType" inputVariable="InsertInSIGLO_PED_EXT_LIN" outputVariable="InsertOutSIGLO_PED_EXT_LIN"/>
</sequence>
</process>
And change the XML input to that:
<?xml version="1.0" encoding="iso-8859-1"?>
<root>
<ORDERS id="125" numero="34" FechaPedido="05/10/2006" FechaEntrega="05/11/2006" Observaciones="Pedido en monitorización." ejercicio="2006" Funcion="0" tipoPedido="220" condFacturar="81E">
<Usuario id="45">
<Contacto id="13" tipo="TE" descripcion="Teléfono de Juanjo Carmona" valor="620987845"/>
</Usuario>
<Procedimiento id="1" codigo="0" descripcion="Concurso Público"/>
<Contrato id="1457467" Expediente="07CSU001" CCA="123+WER345"/>
<Empresa id="13" codigo="237619" nombreComercial="nombreComercial1" nombreFiscal="nombreFiscal1" CIF="cif1" EANvendedor="CODIGOEAN111" EANDestino="CODIGOEAN112"/>
<OrganoGestor id="1" descripcion="Hospital Virgen de Tal" EANQpide="CODIGOEAN113" EANAqsf="CODIGOEAN114" EANEmisor="CODIGOEAN115"/>
<Lineas>
<PedidoLinea id="234" numeroLinea="1" numeroSerie="1" numeroLote="1" numeroAlbaran="1" fechaAlbaran="05/11/2006" valorarAlbaranes="true" CantidadCompra="3" Observaciones="observaciones lÃÂnea1" cantidadPendiente="3" cantidadAnulada="0" precio="11.243">
<Producto id="1228" CIP="" refFabricante="CS-16402" modelo="modelo1" marca="marca1"/>
<Articulo id="89" codigo="001097" codigoSAS="01.02.07.120045" codigoLocal="014554" unidadContratacion="CMK" unidadMedida="CMK"/>
<InfLogistica id="45" codigoEAN="codigoEAN1" refDistribuidor="refDistribuidor1">
<Oferta id="67" factorContratacion="2.5" cantidadContratacion="7.5" cantidadEnUnidades="7"/>
</InfLogistica>
<ProgramacionEntregas>
<Entregar id="61" cantidad="3" fecha="05/11/2006"/>
</ProgramacionEntregas>
<PuntoEntrega id="546" EANReceptor="CODIGOEAN120" descripcion="Almacen principal"/>
<Origen id="464">
<TipoOrigen id="1" descripcion="tipo1"/>
<SolicitudLinea id = "453">
<Solicitud id="67" codigo="3456"/>
</SolicitudLinea>
</Origen>
</PedidoLinea>
</Lineas>
</ORDERS>
</root>
An the result is:
I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750656880061 is http://www.w3.org/2004/08/wsdl/in-only
I18N: BPJBI-3004: Received in-only message for M Ex 123033969803782-31456-134439750656880061 content is <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:msgns="http://j2ee.netbeans.org/wsdl/MapeoPedidosEntrada/PollInPE" type="msgns:PollInputMessage" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part><root>
<ORDERS FechaEntrega="05/11/2006" FechaPedido="05/10/2006" Funcion="0" Observaciones="Pedido en monitorizaci�³n." condFacturar="81E" ejercicio="2006" id="125" numero="34" tipoPedido="220">
<Usuario id="45">
<Contacto descripcion="Tel�©fono de Juanjo Carmona" id="13" tipo="TE" valor="620987845"/>
</Usuario>
<Procedimiento codigo="0" descripcion="Concurso P�ºblico" id="1"/>
<Contrato CCA="123+WER345" Expediente="07CSU001" id="1457467"/>
<Empresa CIF="cif1" EANDestino="CODIGOEAN112" EANvendedor="CODIGOEAN111" codigo="237619" id="13" nombreComercial="nombreComercial1" nombreFiscal="nombreFiscal1"/>
<OrganoGestor EANAqsf="CODIGOEAN114" EANEmisor="CODIGOEAN115" EANQpide="CODIGOEAN113" descripcion="Hospital Virgen de Tal" id="1"/>
<Lineas>
<PedidoLinea CantidadCompra="3" Observaciones="observaciones lÃ?Ânea1" cantidadAnulada="0" cantidadPendiente="3" fechaAlbaran="05/11/2006" id="234" numeroAlbaran="1" numeroLinea="1" numeroLote="1" numeroSerie="1" precio="11.243" valorarAlbaranes="true">
<Producto CIP="" id="1228" marca="marca1" modelo="modelo1" refFabricante="CS-16402"/>
<Articulo codigo="001097" codigoLocal="014554" codigoSAS="01.02.07.120045" id="89" unidadContratacion="CMK" unidadMedida="CMK"/>
<InfLogistica codigoEAN="codigoEAN1" id="45" refDistribuidor="refDistribuidor1">
<Oferta cantidadContratacion="7.5" cantidadEnUnidades="7" factorContratacion="2.5" id="67"/>
</InfLogistica>
<ProgramacionEntregas>
<Entregar cantidad="3" fecha="05/11/2006" id="61"/>
</ProgramacionEntregas>
<PuntoEntrega EANReceptor="CODIGOEAN120" descripcion="Almacen principal" id="546"/>
<Origen id="464">
<TipoOrigen descripcion="tipo1" id="1"/>
<SolicitudLinea id="453">
<Solicitud codigo="3456" id="67"/>
</SolicitudLinea>
</Origen>
</PedidoLinea>
</Lineas>
</ORDERS>
</root></jbi:part></jbi:message>
I18N: BPJBI-3015: Sending status for 123033969803782-31456-134439750656880061. Status: Done.
I18N: BPJBI-3019: Sending a one way outbound message to the NMR. MessageExchangeId is 123033969803782-31456-134439750657350062, service name is {http://enterprise.netbeans.org/bpel/MapeoPedidosEntrada/MapeoPE}log, endpoint name is bitacoraPortTypeRole_partnerRole.
I18N: BPJBI-3018: The contents of the message are : <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:msgns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" type="msgns:bitacoraOperationRequest" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part>
</jbi:part></jbi:message>
HTTPBC-E01052: The value set on the org.glassfish.openesb.address.url normalized message property is invalid. This property is expected to be of String type only.
I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750657350063 is http://www.w3.org/2004/08/wsdl/in-only
I18N: BPJBI-3004: Received in-only message for M Ex 123033969803782-31456-134439750657350063 content is <?xml version="1.0" encoding="UTF-8"?><jbi:message xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:msgns="http://j2ee.netbeans.org/wsdl/bitacora/bitacora" name="input1" type="msgns:bitacoraOperationRequest" version="1.0" xmlns:jbi="http://java.sun.com/xml/ns/jbi/wsdl-11-wrapper"><jbi:part xmlns:m="http://j2ee.netbeans.org/wsdl/bitacora/bitacora">
</jbi:part></jbi:message>
I18N: BPJBI-3015: Sending status for 123033969803782-31456-134439750657350063. Status: Done.
I18N: BPJBI-3002: Pattern for exchange Id 123033969803782-31456-134439750657350062 is http://www.w3.org/2004/08/wsdl/in-only
I18N: BPCOR-3003:
document before transformation:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><jbi:message xm -
There was an error processing a page. there was a problem reading this document (110)?
hi
my name is kapil and i am trying to open one (which is downloded) pdf document.which giving me an error as there was an error processing a page. there was a problem reading this document (110) for some page only. i am using acrobat reader x. is it any 3d setting or any thing else please give me an idea. i am waiting for replay as soon as possible...........
your sincerely
KAPIL TRIVEDIWhen I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice. -
Error message: There was an error processing a page. There was a problem reading this document (110)
I opened a pdf document in Adobe Reader X. When I attempted to scroll through the pages the following error message appeared, “There was an error processing a page. There was a problem reading the document (110). After an Internet search to try to find the reason for the error and a solution, I came across a site that suggested it was an issue regarding the fonts of the document. I then reopened the document and went into the document’s font properties (FILE – PROPERTIES – FONTS tab). There I noticed that the “Gathering font information” stopped at 2% which, of course, I took to mean that Adobe Reader X was having a difficult time in loading the font’s information. Another site suggested opening the document in the pdf reader, Foxit. So I did, and the document loaded properly with no error messages. I was still curious as to why the document did not load entirely in Adobe Reader X and if the same problem would occur using a different reader. I then downloaded the pdf reader, Nitro Reader 2. I opened the same document and initially received the following message, “The requested page number is invalid and does not exist in this document.” I closed the message and proceeded to scroll through the document. As I scrolled, the following message appeared, “This file was damaged (corrupted) and has been repaired.” I thought, “Wonderful!” I then chose <FILE – SAVE AS – PDF DOCUMENT> and saved the “repaired” document under a new name. When I opened the “repaired” document with Adobe Reader X, behold, the document opened entirely with no error message. I was curious, so I went into the document’s font properties and noticed, this time around, that the “Gathering font information” loaded to 100%. Nitro Reader 2 detected the error and fixed it. Now I’m left to wonder…why wasn’t Adobe Reader X able to do the same? I hope this post helps others who are experiencing the same issue.
When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice. -
Error : There was a problem reading this document (109).
hello, i have a lot of PDF Files that become corrupted ! i dont know why
and i receive this error message when i open the pdf file:
" There was an error processing a page. There was a problem reading this document (109)."
im using adobe acrobat 8 prof. also acrobat reader.
please can any one help me to solve this big problem.When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice. -
I have a Problem in print the long description data through EDI.
I have a Problem in print the long description data through EDI:Actually we want to print the long description data through EDI, but it not handling our huge long description data. Here is the example of that>We can print the first two lines into EDI output, but it is failing to print the below text:
<B>EPSON, TM-U590 Series: </B> Reliable 88 column slip printer. Operator friendly dot matrix impact printing. Ideal for hotel, bank, restaurant and many more applications .<br><BR> Includes: Printer, Black ribbon & a Connect-It Interface. Power Supply & interface cable sold separately. All printers are RoHS compliant & have a standard 1 year depot warranty. <BR> <BR>
-------------------------------------Failing to print this lines------------------------------------------------------------------
<b>COLORS:</b> Epson Cool White (ECW) Only<BR><BR><B><FONT COLOR=#FF0000#>Click links below for helpful Information</FONT><b><br><table border="0" bordercolor="" style="" width="100%" cellpadding="5" cellspacing="5"><tr><td><FONT SIZE="2"><CENTER><A HREF="www.sample.com"f.2605" target="_blank"><b>Spec Sheet</b></a></CENTER></FONT></td><td><FONT SIZE="2"><CENTER><A HREF="www.sample.com"f.2606" target="_blank"><b>MSRP Price List</b></a></CENTER></FONT></td><TD><FONT SIZE="2"><CENTER><A HREF="www.sample.com"f.2868" target="_blank"><b>Product Information Guide</b></a></CENTER></FONT></TD></TR><TR><td><FONT SIZE="2" COLOR=#0000FF><B>Warranty Information</B></FONT></td></tr><Tr><td><FONT SIZE="2"><CENTER><A HREF="www.sample.com"f.2554" target="_blank"><b>Depot Warranty</b></a></CENTER></FONT></td><td><FONT SIZE="2"><CENTER><A HREF="www.sample.com"f.2555" target="_blank"><b>Spare In the Air Warranty</b></a></CENTER></FONT></td><td></td></tr></table><br>
Please provide some useful thoughts on this EDI issue.
Thanks
AmeerTry using the FM:
ENQUE_READ2
Passing the follwing values:
GNAME --> VBAK (Sales Order header table)
GARG --> The lock argument
(This will be a combination of client number anb Sales Order No.
Eg: '3001210000054' where the first three digit i,e 300 is the client No
and 1210000054 is the sales order no.)
Regards,
Firoz. -
Error processing a page. Problem reading document (110)
This occurring following error message when opening a PDF file:
"Error processing a page. Problem reading document (110)"
Does anyone have any suggestions?When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice. -
Append to AD User Account Description Property
How do I incoroporate this into the script below. I need to Append/Add to the AD User Accounts' description property
flagged for disablement with (Dor-Get-Date-IEM).
#My Script
cls
Import-module activedirectory
$90days = (get-date).AddDays(-90)
$filepath="C:\Temp\Dormant_Report_$(Get-Date -Format yyyyMMddmm).csv"
$splatter=@{
Filter={
enabled -eq $True
-and lastlogondate -le $90days
-and (employeeType -like 'E' -or employeetype -like 'C' -or employeetype -like 'X' -or employeetype -like 'A' -or employeetype -like 'N')
Property=@(
'name',
'SurName',
'givenName',
'description',
'employeeType',
'employeeID',
'extensionAttribute15',
'lastlogondate',
'passwordlastset'
$results=Get-ADUser @splatter
$results | Export-Csv $filepath -NoTypeInformation
$results | Disable-ADAccount -WhatifIt will overwrite whatever is currently set in the description field. Here's a quick example of how you can append to the description:
$user = Get-ADUser testac1 -Properties Description
Set-ADUser testac1 -Description ($user.Description + " ADD TEXT HERE")
Don't retire TechNet! -
(Maybe there's still a chance for hope, over 10,750+ strong and growing) -
HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
Problem reading RFC values from IRecordSet !!!!
Hi All,
I am having some problem reading values from IRecordSet. Can not seem to parse the output structure from RFC. AM using connector gateway service to execute BAPI_EXCHRATE_GETCURRENTRATES.
Here is the code,
MappedRecord input = rf.createMappedRecord("input");
input.put("DATE",new String("01011990"));
input.put("DATE_TYPE", new String("V"));
input.put("RATE_TYPE", new String("M"));
MappedRecord output = (MappedRecord) ix.execute(ixspec, input);
Object rs = null;
IRecordSet recSet = null;
Object result = output.get("EXCH_RATE_LIST");
if (result == null) {
response.write("<BR>null");
rs = new String(" ");
} else if (result instanceof IRecordSet) {
IRecordSet irs = (IRecordSet) result;
response.write("<BR>Got some dataaa");
IRecordMetaData rsmd = null;
rsmd = irs.retrieveMetaData();
irs.beforeFirst();
while(irs.next()){
response.write("Row::"+irs.getString("RATE_TYPE")+" "+irs.getString("FROM_CURR")+" "+irs.getString("EXCH_RATE"));
Am getting the pritn statement, Got Some Data on the PDK component.
But somehow not able to read the values from IRecordSet
What is the mistake here?
Pls help
Edited by: Aakash Jain on Oct 11, 2008 12:22 AMHi
Try in this way.
IRecordSet resultTable = (IRecordSet)outputParams.get("TABLE_NAME");
for(resultTable.beforeFirst(); resultTable.next(); ) {
response.write(resultTable.getString(0));
response.write(resultTable.getString(1));
Thanks -
There was a problem reading this document (117)
Dear Designers
I am facing a strange problem while doing test presentment in Adobe output designer. When i do a test presentment with my dat file which is meant for fax (^job newFax -fform01F.MDF) , i see the pdf (consist of 2 pages ) but as soon as i scroll down to next page (Pg 2) of my pdf ; it giving me a Adobe reader error pop up "There was a problem reading this document (117)" and when i click OK and comes to page 2 (i'm seeing the content of Pg2 curerntly) and scroll back to page 1 the data on page 2 goes blank. What could be the possible reason for this ? I assume the flaw is on Adobe reader side , but please brighten me with the knowledge if there is some issue on dat file side.
Any possible guidance or help would be highly appreciated
thanks
jaYSorry, I do not quite understand what your problem is:
you have a problem with signing in to the ExportPDF service ?
you have a problem opening PDF files ? If so, are these local or online documents?
P.S. Reader XI and earlier will no longer support Document Cloud PDF services as of May 20; see https://forums.adobe.com/docs/DOC-5891 -
THE FAMOUS ERROR: There was a problem reading this document (15) - Thanks Adobe Engineering team
As a result of this error, I cannot delete pages in a big PDF file I have of 1032 pages.
The error, famous on the web and in Google, is:
there was a problem reading this document (15)
I hope I can find a solution for this, because I cannot delete the unnecessary pages inside the document which is driving me crazy.
Adobe Acrobat X has a very poor quality testing. In fact I don't beleive Adobe test their products, I think they just program them, label them as the finished product, ASK FOR A HIGH PRICE, OF COURSE, and release them to the market creating a lot of nightmares and headaches to the customer.
Adobe Acrobat X crashed several times when the files have flash content inside or formularies. The program, simply, is bad programmed with a very poor engineering inside.
As soon I find an alternative for PDF, I will switch, I promise, in fact I don't promise it, I SWEAR IT.
And if I dont find a solution for this I will put in my car a banner that says "DON'T BUY ADOBE ACROBAT, IS THE WORST PROGRAM YOU CAN FIND!"
I'm loosing days and days of work, this is costing me problems and money.Yes, there is something wrong with the document. That is the defective programming the Adobe engineering team did. And please, allow me to explain you why it is defective. After you spend millions dollars in 950 engineers and 3100 beta testers, you can destroy Adobe Acrobat X easily just downloading a website rich in flash content. Some animated banners in the downloaded pages from the web, it's enough to destroy it.
Just go to a website where you have animated banners, and press Shift+Crtl+O to download the pages...
Save your PDF document and then try to work with it.
If the document has a big size, let's say 1000 pages approximately, and many of them have flash content... Adobe Acrobat X crash automatically just moving from one page to another.
As simple as that.
Is the most unstable program I've seen in all my life. And please, don't tell me it's my machine, because I've tested it in other computers. The same!
But there is more! yes
Forms fields also destroy Acrobat X
In a big PDF file having several pages inside with forms, just go to Tools, Forms and Edit, then in the list of pages try to delete the forms fields selecting them and pressing the Del key... crasshhhh Acrobat X die.
What kind of betatesters you chose to test your products? For sure are people that are working with light documents of 5... 10 pages and no more.
For sure are not people working extensively with Adobe Acrobat, as I do.
And what happens when Acrobat X crash miserably time after time? that the Error 15 comes, because the file becomes corrupted.
This is not serious.
Is this the kind of performance and stability that Acrobat provide to the customers? having the risk to lose important documents and data, due how unstable is the program?
You can tell me you hired NASA personnel to do this program, but customers need results, and crashing the program just pressing one key is not serious.
And talking about complains I don't want to remember the last update of the Acrobat 9 !!!
And you know what? a simple tool as NitroPDF don't crash!
Sadly NitroPDF is not an option for me, because I embed videos in the PDF documents and NitroPDF don't allow me that.
I am using Adobe Acrobat X because sadly I don't find another alternative, the day I find it, I'll switch for sure.
Or perhaps we can get a miracle, and your programmers could focus in what is IMPORTANT: STABILITY AND PERFORMANCE. -
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
Error:There was an error processing a page. There was a problem reading this document (129)
System: Windows 7 64-bit
Adobe Acrobat Pro X
Client received a pdf file and gets this message when try to open it.
I test it on my PC which is using Acrobat standard (same system) and gets the same error. Did some research on Internet and this message with the code 129 is rare.
Please help and thanks in advance.
FengThanks Guys.
The file she was trying to open was created by herself days ago, I asked client to open previous file version and she can open it.
So that means the conclusion you guys made is correct.
But she is getting another error message when sha trys to save a different file:
"The dicunent could not be saved. There was a problem reading this document (14) "
Any ideas?
Thanks
Maybe you are looking for
-
IPod Classic 7th Gen Docking Compatability
I have a brand new iPod Classic 160GB with latest software version (2.0.5 PC) that is barely a week old. I have been trying unsuccessfully to get it to work properly on both the NAD VISO 1 speaker dock and the B&W Zeppelin Air (both also brand new -
-
Remove Empty XML Tags using module parameters
Hi All, In my lanscape I have two PI Systems. My scenario is an IDOC reaches 1st PI system gets converted into an EDIFACT and then goes to the 2nd PI and from there it gets routed to the respective AS2 Party. I am using SOAP to pass message between t
-
HI ALL, IN SCRIPTS.. we use this Protect ...EndProtect....for getting the paragraph in one page...If we have paragraph the size of that is more than one page.. then what we have to do..what is the output.. Regards, anilreddy..
-
How do I access my photos in Elements 10 by using Revel which does recognise albums by name?
How do I access my photos in Elements 10 from Revel which does not recognised named albums?
-
It also said I need to load software to allow it to play the netflix movies. What do I need to do.