Problem reading RFC values from IRecordSet !!!!

Hi All,
I am having some problem reading values from IRecordSet. Can not seem to parse the output structure from RFC. AM using connector gateway service to execute BAPI_EXCHRATE_GETCURRENTRATES.
Here is the code,
MappedRecord input = rf.createMappedRecord("input");
input.put("DATE",new String("01011990"));
input.put("DATE_TYPE", new String("V"));
input.put("RATE_TYPE", new String("M"));
MappedRecord output = (MappedRecord) ix.execute(ixspec, input);
Object rs = null;
IRecordSet recSet = null;
Object result = output.get("EXCH_RATE_LIST");
if (result == null) {
response.write("<BR>null");
rs = new String(" ");
} else if (result instanceof IRecordSet) {
IRecordSet irs = (IRecordSet) result;
response.write("<BR>Got some dataaa");
IRecordMetaData rsmd = null;
rsmd = irs.retrieveMetaData();
irs.beforeFirst();
while(irs.next()){
response.write("Row::"+irs.getString("RATE_TYPE")+" "+irs.getString("FROM_CURR")+" "+irs.getString("EXCH_RATE"));
Am getting the pritn statement, Got Some Data on the PDK component.
But somehow not able to read the values from IRecordSet
What is the mistake here?
Pls help
Edited by: Aakash Jain on Oct 11, 2008 12:22 AM

Hi
Try in this way.
IRecordSet resultTable = (IRecordSet)outputParams.get("TABLE_NAME");
for(resultTable.beforeFirst(); resultTable.next(); ) {
response.write(resultTable.getString(0));
response.write(resultTable.getString(1));
Thanks

Similar Messages

Facing Problem with passing Values from One report to another

Hi,
I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
Please, let me know whats going wrong.
Thanks for the help.

sorry for the late updation.
My First Report, Summary level is a Pivot Table.
I tried the same report with Table option, the value is passing correctly.
Is there a way to get rid of this situation using Pivot table.
Thanks for your help.
below is the original request.
Hi,
I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
Please, let me know whats going wrong.
Thanks for the help.

Reading each value from spreadsheet file with delay (multiple rows and columns)

Hi,
a) I want to read EACH VALUE from a spreadsheet file having multiple rows and columns WITH DELAY. I am attaching my VI and sample datalog file for reference (tempsensor.txt).I need to do so because as soon as I read put ON the Sensor button on front panel, LV reads all the values at one go. I need the values for each temperature to be displayed after a delay.
b) Secondly, I would like to read another file containing the state of four antennas (deployed:1; undeployed:0). I am logging state of each antenna in each column of the file(magnet.txt) I need to have four LEDS on front panel to display state of the antennas. I dont know what I have done for antennas in my VI is right or wrong. I guess thats rhe wrong way to approach the problem. Please help!!!(column1: Antenna1 state ; Column2:Antenna2 state.. and so..on..)
Any help would be greatly appreciated!!
Thanks in advance,
Ratnesh
FYI: The first column in my datalog file represents timestamp(number of seconds elapsed), second column: reading for temperature sensor 1, third column: reading for temperature senosr 2, and so on. I am using approx. 11 temperature sensors.
Also, I have generated the log files for the reference purpose only. They do not represent the actual values. They are far away from actual values.
Attachments:
01032005.zip ‏30 KB

Look at this modified version of your VI. After looking at it, I determined that a shift reggister was not required in this case.
Lynn
Attachments:
MultiSensors.2.vi ‏85 KB

Reading any value from table into a string (Especially date etc..)

How would I read any value from a table into a string?
Currently doing the following...
data ret_val type string.
select single (wa_map-qes_field) from z_qekko into ret_val
where
angnr = _angnr.
When the source field is a date it bombs though.
The result goes into a BDCDATA-fval.
regards
Dylan.

Tried...
1    DATA: lp_data TYPE REF TO DATA.
2    FIELD-SYMBOLS: <value> TYPE ANY.
3    CREATE DATA lp_data LIKE (wa_map-qes_field).
4    ASSIGN lp_data->* TO <value>.
5    SELECT SINGLE (wa_map-qes_field) FROM zquadrem_qekko INTO <value> WHERE angnr = _angnr.
Complains that (wa_map-qes_field) is not defined in line 3.
Think that the bracket thing is only available via SQL.
What about CREATE DATA lp_data type ref to object. ?
Would the above declaration work?
regards

Subprocess 33 was not successful. Master cannot read return value from S 33

Hi All,
We are on BI 7.0 SP 19.
We have submitted a planning sequence in the background with automatic packaging.
The planning sequence has two steps:
Step 1. Z_PLNG_FUNCTION1
Step 2. Z_PLNG_FUNCTION2
As per automatic packaging, the system chose 0ACCOUNT for packaging.
When submitted, each step has been submitted to 30 packages as 30 subprocesses.
For Step 1, the log shows that All subprocesses executed.
For Step 2, the log shows that the subprocess 33 and 58 failed, which means subprocess #3, and # 28 for the step 2 as the subprocess is numbered in the log in combination with step 1.
The messages in the log for the failed subprocesses are as follows:
@5C\QError@     Subprocess 33 was not successful
@5C\QError@     Master cannot read return value from subprocess 33
@5C\QError@     Subprocess 58 was not successful
@5C\QError@     Master cannot read return value from subprocess 58
Our question is on how to find the exact cause of the subprocess failure.
I tried to look for the details on the error messages, they have been not helpful.
What is meant by 'Master cannot read return value from subprocess' and how to get the exact cause of the failure?
Thanks in advance,
Best Regards,
- Shashi

Shashi,
implement the following notes and check again:1368659, 1525723, 1532061.
Regards,
Marc
SAP Techology RIG

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox.

Read bool value from xml

Hi all :
I try to read Boolean value from xml file , please see attach file , all the time this error rise
I know that The XML tag describing the type of data does not match, how can I get Boolean value " 1" or "0 "
Thanks
wisam
Attachments:
untitled1.JPG ‏115 KB

You are not trying to read boolean.. you are trying to read a DBL.
To read a DBL you must first write a DBL to XML.
To read a boolean replace the DBL with a boolean

RE: (forte-users) Reading return value from Javaprogram

when using the RunCommand method you can specify the an error file:
task.part.os.RunCommand(command = l_tdCommandLine,
isSynchronous = TRUE,
inputFile = Nil,
outputFile = Nil,
errorFile = l_ErrorFile.GetLocalName(TRUE));
BEGIN
l_ErrorFile.Open(SP_AM_READ);
EXCEPTION
WHEN Ex: FileResourceException DO
l_ErrorFile = NIL;
task.ErrorMgr.Clear();
END;
IF l_ErrorFile <> NIL THEN
l_tdFileContents : TextData = New();
l_ErrorFile.ReadText(l_tdFileContents);
l_ErrorFile.Close();
END IF;
Have you java program output the return value to the standard IO. This way
you will have an error file that you can read from Forte.
ka
-----Original Message-----
From: Anthony D [mailto:saigonxyahoo.com]
Sent: Tuesday, September 12, 2000 7:49 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Reading return value from Java program
Hi,
Does anyone know whether Forte application can
read a return value from a Java program?
I'm using the RunCmd method to invoke the Java
program. I'd like to read the return value from the
Java program. How do I go about doing it?
Any suggestion will be appriciated.
Thanks
AD
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

when using the RunCommand method you can specify the an error file:
task.part.os.RunCommand(command = l_tdCommandLine,
isSynchronous = TRUE,
inputFile = Nil,
outputFile = Nil,
errorFile = l_ErrorFile.GetLocalName(TRUE));
BEGIN
l_ErrorFile.Open(SP_AM_READ);
EXCEPTION
WHEN Ex: FileResourceException DO
l_ErrorFile = NIL;
task.ErrorMgr.Clear();
END;
IF l_ErrorFile <> NIL THEN
l_tdFileContents : TextData = New();
l_ErrorFile.ReadText(l_tdFileContents);
l_ErrorFile.Close();
END IF;
Have you java program output the return value to the standard IO. This way
you will have an error file that you can read from Forte.
ka
-----Original Message-----
From: Anthony D [mailto:saigonxyahoo.com]
Sent: Tuesday, September 12, 2000 7:49 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) Reading return value from Java program
Hi,
Does anyone know whether Forte application can
read a return value from a Java program?
I'm using the RunCmd method to invoke the Java
program. I'd like to read the return value from the
Java program. How do I go about doing it?
Any suggestion will be appriciated.
Thanks
AD
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

JCo's StatefulServerExample problem (returning a value from RFC call?)

Hi,
I'm using JCo3 and want to run StatefulServerExample sample program. I've created the ABAP-side code according to JCo's docs (2 wrappers and report ZJCO_STATEFUL_COUNTER). I'm connecting to SAP CRM. I've successfully runned all other sample programs.
I've got a problem with receiving data from the JCo server to CRM report. The error is reported on the SAP's side:
error:          CALL_FUNCTION_WRONG_VALUE_LENG
description:    Incorrect field length for 'Remote Function Call'.
error analysis:
A data error occured when executing a Remote Function Call
The length of one of the fields is incorrect.
Length of source field... 1
Length of target field .. 4
Data type of field....... 8
(Data type 0=C, 1=D, 2=P, 3=T, 4=X, 6=N, 7=F, 8=I)
error is triggered by the call to 'Z_GET_COUNTER' (see code below).
There is no problem with preceding calls to JCo server which do not return anything.
I would appreciate any help with this problem!
Piotr
Problematic report code:
*& Report ZJCO_STATEFUL_COUNTER
REPORT ZJCO_STATEFUL_COUNTER.
PARAMETER dest TYPE RFCDEST.
DATA value TYPE I.
DATA loops TYPE i VALUE 5.
DO loops TIMES.
CALL FUNCTION 'Z_INCREMENT_COUNTER' DESTINATION dest.
ENDDO.
CALL FUNCTION 'Z_GET_COUNTER' DESTINATION dest
IMPORTING
    GET_VALUE = value.
IF value <> loops.
write: / 'Error expecting ', loops, ', but get ', value,
' as counter value'.
ELSE.
write: / 'success'.
ENDIF.

It seems to me that the ABAP code in the example is wrong - it should be INT1 instead of i:
DATA value TYPE INT1.
Now it works.

Problem when Reading Multiple values from Arduino to Vb

Hi Mates,
I am getting 4 values from Arduino using Serial.Println statement 4 times. How do I need to receive these values to 4 different variables in VB without using any buttons. We have to serial data received as per my knowledge.
I've written the following code in VB.
Imports System
Imports System.ComponentModel
Imports System.Threading
Imports System.IO.Ports
Public Class Form1
Dim myPort As Array 'COM Ports detected on the system will be stored here
Delegate Sub SetTextCallback(ByVal [text] As String) 'Added to prevent threading errors during receiveing of data
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
SerialPort1.PortName = "COM5" 'Set SerialPort1 to the selected COM port at startup
SerialPort1.BaudRate = 9600 'Set Baud rate to the selected value on
SerialPort1.Open()
'Timer1.Start()
End Sub
Private Sub SerialPort1_DataReceived(ByVal sender As Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) Handles SerialPort1.DataReceived
ReceivedText(SerialPort1.ReadLine()) 'Automatically called every time a data is received at the serialPort
End Sub
Private Sub ReceivedText(ByVal [text] As String)
'compares the ID of the creating Thread to the ID of the calling Thread
If Me.rtbReceived.InvokeRequired Then
Dim x As New SetTextCallback(AddressOf ReceivedText)
Me.Invoke(x, New Object() {(text)})
Else
Me.rtbReceived.Text &= [text]
End If
End Sub
End Class
How do I need to differentiate the values in ReceivedText function and How can I display those values in 4 text boxes. I am able to display all the values in rtbReceived text box as 100200300400100200300400... So on
Assume values from Arduino are 100, 200, 300 & 400
Your suggestions would be more helpful to complete my project, Thanks in Advance
Thanks,
Santhosh

How do I need to differentiate the values in ReceivedText function and How can I display those values in 4 text boxes. I am able to display all the values in rtbReceived text box as 100200300400100200300400... So on
Assume values from Arduino are 100, 200, 300 & 400
Based on the example you have provided you would simply use the String.Substring function to break the string apart ot every 4 characters.
https://msdn.microsoft.com/en-us/library/aka44szs%28v=vs.110%29.aspx
You could do that in a loop that changes the starting character position from 0 in an increment of 4.
However I suspect that won't work properly, either because there are characters that you are not revealing as a result of the way that you are display your results, or because your data gets out of sync.
If your device sends synchronizing characters (such as an end-of-record byte, or perhaps just a CrLf) then the correct process is to append (not overwite) the text you receive. Use a string, not a text box text property, for this buffer. Then you need
to break apart this buffer by scanning forward until you find a complete message - a record identifier and enough (12?) following characters to create a full sentence. Then break it apart using substrings.
If your device data stream does not include something that marks the beginning or end of a complete transmission then you can still try breaking it apart every four characters, and see how reliable it is.

Reading filter values from dtp in routine of transformation

Hello,
I try to read a date from the filter of a dtp and propagate this value during the transformation in a routine. this is my code
DATA:
*Date parameter from DTP
       i_calday    type /BI0/OICALDAY,
       i_date(16) type n.
    data: t_filter_values type RSBK_TH_RANGE,
          l_filter_values like line of t_filter_values.
    t_filter_values = p_r_request->GET_TH_RANGE( ).
* get DTP
    LOOP AT t_filter_values into l_filter_values.
      move l_filter_values-high to i_date.
      EXIT.
    ENDLOOP.
    I_calday = i_date+8(8).
    RESULT = I_CALDAY.
but when dubbing my code t_filter_values is always empty and I do not see the selections from the dtp. please do you have an idea what is wrong?
thanks

Hello
I found the error thanks to Ghuru Balaji S,
now the code is working:
DATA:
      t_filter_values type RSBK_TH_RANGE,
      i_filter_values like line of t_filter_values ,
      i_calday    type /BI0/OICALDAY,
        i_date(16) type n.
t_filter_values = P_R_REQUEST->get_TH_RANGE( ).
READ TABLE t_filter_values with KEY
FIELDNM = 'DATEFROM' into i_filter_values.
move i_filter_values-high to i_date.
I_calday = i_date+8(8).
RESULT = I_CALDAY.
problem was that I had other selection in the dtp
Edited by: Margit Schütz on Dec 27, 2010 4:08 PM

Custom Rule - Problem in passin values From Rule Container to WF Container?

Hi Guys,
I am having hard time passing values back from my custom rule. I have created a custom rule to determine the agents in PFAC which takes in the Person number as import element of container. It determines the Manager as agent and I am passing Managers Person Number back to workflow. If he dont approve the Request then it will be passed to his boss. In this case I will pass this imported Mangers Person number back to rule so that his boss will be determined as agent. I have created ZRULE function module. I am passing value back from Rule container to Workflow Container using following code.
swc_set_element ac_container 'SUPERPERNR' lf_super_pernr.
I have created a element SUPERPERNR on rule container and workflow container as well .The problem is in the Rule container I am not able to create SUPERPERNR as export parameter. The tick mark is grayed out and there is no option for setting it as export.
My question is do I have create a Export element on Rule container or Not? If i just write the code
( swc_set_element ac_container 'SUPERPERNR' lf_super_pernr ) will it set the value in WF container? In my case it is not setting. I have to bind the values from rule container to WF container and if My rule container element is not allowing me to click the tick mark as export how can i pass value of of rule container back to WF Container?
Please help me guys.
Thanks,
Manish.

Hi Manish,
     Same scenario I have developed in my system. This all steps I did in my system.
1) Created a Z function module which takes import parameter (Parameter name = 'EMP') in the
    format 'US100123'.
2) This in turn fetches back the supevisor or boss as an export parameter (Parameter name = 'BOSS') in
     the format 'US100245'.
3) This function module is attached to a BUS object(SWO1).
4) While attaching this function module to BUS object you need not do any manual coding it is done
    automatically.
5) Implement, release and generate this BUS object.
6) Create a new variable in your workflow (Parameter name = 'ZSUPERVISOR') for storing the value
    which is returned by the Z method.
7) Create a new task.
8) Put in your BUS object name, then your Z method name, select background processing checkbox.
9) Press save, it will ask for transfer of missing elements, select yes.
10) Then you will see a green button below your Z method name click on it.
11) Top portion contains your Z method variables, below to it you have the import parameter window in
      this window you should have &EMP& -> &EMP&., below to import parameter window you have
      export parameter window in this window you should have &BOSS& <- &BOSS&. (This is method
      binding).
12) Now click on enter button then click on back button it will generate the task binding automatically
     just press yes.
13) Now click on binding exist button.
14) Here you have the Workflow container variables as well as the system container variables.
15) In the import parameter window left portion is for your workflow variables and right portion is for your
      method variables. In my case i had sent workflow initiator and fetched his supervisor. The Import
      parameter binding was &WF_INTIATOR& -> &EMP&. and the export parameter binding part was
      &ZSUPERVISOR& <- &BOSS&.
16) Save the task and run the workflow.
Regards.
Vaibhav Patil.

Problems getting selected values from HtmlSelectManyCheckbox

Hello,
I am having problems getting values via getSelectedValues() from my HtmlSelectManyCheckbox component. The method returns an object array but the values are the same as the initial selectItems property.
JSP:
<h:selectManyCheckbox id="checkBox"
    binding="#{userEditBean.manyCheckbox}"
    value="#{userEditBean.groupIds}"
    layout="pageDirection">
<f:selectItems value="#{userEditBean.allGroups}"/>
</h:selectManyCheckbox>
<h:commandButton action="#{userEditBean.ok}"     value="OK"/>Bean:
public class UserEditBean extends BaseBean {
    private HtmlSelectManyCheckbox manyCheckbox = new HtmlSelectManyCheckbox();
    private String[] groupIds= {};
    private List allGroups = new ArrayList();
    public String[] getGroupIds() {
            groupIds= backing.getSomeIds();
            return groupIds;
    public void setGroupIds(String[] ids) {
        this.groupIds= ids;
    public HtmlSelectManyCheckbox getManyCheckbox() {
        return manyCheckbox;
    public void setManyCheckbox(HtmlSelectManyCheckbox newC) {
        this.manyCheckbox = newC;
    public List getAllGroups() {
        allGroups = backing.getAllGroups();
        return allGroups;
    public void setAllGroups(List newList) {
        this.allGroups = newList;
    public String ok() {
        Object o = manyCheckbox.getSelectedValues();
    }The problem is, the getSelectedValues() returns the values from the initial state of the page. The is no mark of the changes made by the user. Any help will be appreciated
Thanks,
Matek

Your approach is somewhat odd. The selected values are just reflected in the groupIds, but you're overridding it with backing.getSomeIds() each time when the getter is called.
Here is a basic working example:<h:selectManyCheckbox value="#{myBean.selectedItems}">
    <f:selectItems value="#{myBean.selectItems}"/>
</h:selectManyCheckbox>
<h:commandButton value="submit" action="#{myBean.action}" />MyBeanprivate List<String> selectedItems;
private List<SelectItem> selectItems;
// + getters + setters
// You can use initialization block or constructor to prepopulate the selectItems.
    selectItems = new ArrayList<SelectItem>();
//or
public MyBean() {
    selectItems = new ArrayList<SelectItem>();
public void action() {
    // The selected items are reflected in selectedItems.
    for (String selectedItem : selectedItems) {
        System.out.println(selectedItem);
}

Problem regarding accessing values from IBM Tivoli Directory Server

hi,
I am able to retrieve the values from ITDS.
But the problem is when retrieving userPassword attribute value.
Actually when i enter the userid and password in an html page and try to retrieve the corresponding user information from ITDS then it gives me exception
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:358)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
root cause
java.lang.NullPointerException
     org.apache.jsp.Report_jsp._jspService(Report_jsp.java:74)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:133)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:311)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
note The full stack trace of the root cause is available in the Tomcat logs.
While it is working fine for other attributes like mail etc.
Is it somewhat related to encryption of password.
How can it be solved?
Thanks

Hi!
pls see http://help.sap.com/saphelp_nw70/helpdata/EN/44/0761cea5c610b3e10000000a11466f/frameset.htm
if the users shall be created in the LDAP directory the UME datasource configuration has to be read/write.
Regards
Michael

Problem in Retrive values from result set

I have a class where i do all database operation .First i fire select query and take values from result set and based on that value i fire update query.
Problem is that i am not getting all values from result set . i get only last value and when i fire update query i get error as :Resultset is closed.
I am using acess and java.

You probably are using the same Statement object for both queries? Try creating separate Statement objects for each query. (My guess is this a problem with the way you're using JDBC, not a Servlet issue.)

Problem reading RFC values from IRecordSet !!!!

Similar Messages

Maybe you are looking for