Problem referring to on-stage movieclips from an array

I have a movieclip on the stage in which I have some 90
movieclips also on the stage.
I created an array to hold the movieclips.
But when I try to add eventlisteners to these movieclips by
cycling through the array, I get a 1009 error ("Could not parse the
XML. Error #1009: Cannot access a property or method of a null
object reference.") Oddly, however, the application seems to work
correctly, handling my listener events.
On the other hand, if I add eventlisteners for each movieclip
individually, all works fine--no errors are thrown.
Can anyone please point out my error?

I found the problem...
I feel sheepish about this, but I misspelled one of the
movieclip instance names in the code (there are 90 of these
movieclips).
That's why the error was thrown, but parts of the application
still worked.
Thanks to all who replied!

Similar Messages

Removing Movieclips from an Array Displayed on stage

Hi Everyone ,
I am new to AS3 so please forgive me in advance if I end up annoying anyone ;(
I need some help in removing Movie Clips from the stage , these were initially loaded off an array
Here is the Code with the NEXT Button , : for both ARRAYS , Notes and Notes15 ( referring to 15th frame)
function nextframepop2(Event:MouseEvent):void{
trace("Mouse Enabled");
removeChild(notes15[4]);
removeChild(notes15[3]);
removeChild(notes15[2]);
removeChild(notes15[1]);
removeChild(notes15[0]);
nextFrame();
function nextframepop1(Event:MouseEvent):void{
trace("Mouse Enabled");
removeChild(notes[1]); // This is Line 635 , but I am not sure what I am doing wrong here.
removeChild(notes[0]);
nextFrame();
I am calling this Function with an If Statement , I need to make sure all the Movie Clips are loaded before the End User decides to move to next slide.
Here is what I get when I run the Next Button ,
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at PORTDemoPresent_fla::MainTimeline/nextframepop1()[PORTDemoPresent_fla.MainTimeline::frame 2:635]
Can anyone please help ?

Based on what you show it is likely that some other function (like the one before it as shown) has already removed the object. What you should do is learn to use the trace function to troubleshoot your code. In this case put in a trace anywhere you add or remove the same object that tells you whether it is added or removed and which line of code it is, realizing that you might be storing the same object with different references to it. That way you should be able to isolate where things are being removed when you don't expect them to be.

How do I removing a specific item from an Array?

Hi there.
I am having an array of movieclips and when my circle(controlled with the keyboard) hitTests true with one of the movieclips inside that array i want to remove that movieclip from the array so when i hitTest it again it returns false (I hitTest using a "for in" with that array).
How do i remove a specific item from within an array?
Can someone help me? Thanks a lot.

i haven't noticed anyone showing deference because of the points. in fact, i've seen some people (a minority, to be sure) be just obnoxious about it. i never encountered that before: some people feel they have power because they can dole out points.
but overall i agree with you: the loss of the list of threads i am participating in, along with the most recent posters name, is a significant drawback of the new forums. and there's nothing new in these forums that offsets that drawback.
in addition, i think we've lost way more than 1/2 the older threads. that's a lot of information that's no longer available.

TypeError: Error #1006 - Removing MovieClip from the stage

I have a movie clip that is called to the stage and once the movieclip is finished it calls a function that removes it from the stage. The code works but I get an error message about 4 seconds after the movie clip ends.
Here’s the error message:
TypeError: Error #1006: exitWordMicroscopic is not a function.
                at ASvocabulary_microscopic/frame110()[ASvocabulary_microscopic::frame110:1]
Here’s the stage code:
//************************Removes the movieclip from the stage and enables the button.*************************
function exitWordMicroscopic():void
                bnt_vocab_microscopic.mouseEnabled = true;
                removeChild(word_Microscopic);
//******************************Stage buttons**************************************
stage.addEventListener(MouseEvent.MOUSE_DOWN, goButtonsHomeRead_1);
function goButtonsHomeRead_1(event:MouseEvent):void
                //Vocabulary buttons
                if (event.target == bnt_vocab_microscopic)
                                bnt_vocab_microscopic.mouseEnabled = false;
                                SoundMixer.stopAll();
                                addChild(word_Microscopic);
                                word_Microscopic.x = 47;
                                word_Microscopic.y = 120;
Here’s the code inside the movie clip. This is what the error message is referring to:
//****************** Calls function to remove itself from the stage****************************
Object(parent).exitWordMicroscopic();
What am I doing wrong?

Here' how the code looks now:
Objective: To remove the current movieclip while it's playing so that it does not show on the next (or previous) frame.
Here’s the stage code:
var word_Microscopic:ASvocabulary_microscopic = new ASvocabulary_microscopic();
//Removes the movieclip from the stage and enables the button.
function exitWordMicroscopic():void
    bnt_vocab_microscopic.mouseEnabled = true;
    removeChild(word_Microscopic);
//******************************Stage buttons**************************************
stage.addEventListener(MouseEvent.MOUSE_DOWN, goButtonsHomeRead_1);
function goButtonsHomeRead_1(event:MouseEvent):void
    //Vocabulary buttons
    if (event.target == bnt_vocab_microscopic)
        SoundMixer.stopAll();
        bnt_vocab_microscopic.mouseEnabled = false;
        addChild(word_Microscopic);
        word_Microscopic.x = 47;
        word_Microscopic.y = 120;
        word_Microscopic.play();
//This button takes the user to the Main Screen
    if (event.target == bnt_ReadGoHome_1)
       // exitWordMicroscopic(); [If I use this function I get this error ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.]
        SoundMixer.stopAll();
        gotoAndPlay("1","Main");
        stage.removeEventListener(MouseEvent.MOUSE_DOWN, goButtonsHomeRead_1);
//This takes the user to the next frame.
if (event.target == GoNext_1)
        SoundMixer.stopAll();
        gotoAndPlay("2");
        stage.removeEventListener(MouseEvent.MOUSE_DOWN, goButtonsHomeRead_1);
Here’s the code inside the movie clip.
//****************** Calls function to remove itself from the stage****************************
Object(parent).exitWordMicroscopic();

Probleme changing the value of a variable in movieclip from my scene

Hello,
i have a probleme changing the value of a variable in movieclip from my scene. i explain: I have combobox on my scene containing categories, and in the scene i load an xml file containing links to php files that work with the combobox.
Also on the scene i have a movieclip "filmstrip", inside this movieclip on the first frame i have a script loading the php file selected in the scene . i use a load() function with a variable "theUrl" inside like this : T.load(theUrl);.
In my scene i want to change the value of "theUrl" inside the movieClip filmstrip. I tried filmstrip.theUrl = url; But it doesnt work
the xml file
<?xml version="1.0" encoding="ISO-8859-1"?>
<slideshow>
<area title1="10 Last updated" link1="link1.php"/>
<area title1="special" link1="link2.php"/>
</slideshow>
here is the code on my scene:
var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
filmstrip.theUrl=url;//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
filmstrip.theUrl=url; //<<-----HERE
select.addEventListener("change",cbListener);
here is the code inside the movie clip "filmstrip"
var T:XML = new XML();
T.ignoreWhite = true;
T.onLoad = function(xml) {
etc etc etc }
T.load(theUrl);    //<<---HERE it still undefined

YESSSS . Thanks you very much Kglad it wotk i put all in a function inside the filmstrip function Tload(theUrl){etc ect}and in the root i call it like this filmstrip.Tload(theUrl);   and it works
code in the root var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<-----HERE
select.addEventListener("change",cbListener);

Randomly generating movieClips from the library onto the stage

Hi
I am trying to call objects from the library for a collection game.
Having major issues with the best way to assign the good objects and the bad objects to later update a score.
Can anyone help me with how i can first assign the movieClips from the library into a good and bad array and then after randomally fill the stage with them.
Regards
James

again and always when testing in the ide, use the trace() function to debug your code:
public function checkCollisions()
                              for (var i:int = objects.length - 1; i >= 0; i--)
                                        if (Point.distance(new Point(gamesprite.car.x,gamesprite.car.y),new Point(objects[i].x,objects[i].y)) < pickupDistance)
                                                  if (objects[i].hitTestobjects(gamesprite.car))
                                                            if (objects[i].typestr == "good")
                                                                      score += 10;
                                                                      trace(score);
                                                            else
                                                                      score -= 4;
                                                                      trace(score);
                                                            if (score < 0)
                                                                      score = 0;
                                                            scoreDisplay.text = String(score);
trace(scoreDisplay.text);
                                                            removeChild(objects[i]);
                                                            objects.splice(i,1);
if you don't see any trace() output, you can conclude that part of your code is not executing. if see trace output, you can don't see the same value in scoreDisplay, you can conclude you're not seeing your scoreDisplay textfield.

Change Stage Frame From Inside MovieClip?

How Do I Change Stage Frame From Inside MovieClip?
Heres my code so far:
hh.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void
gotoAndStop(2);
i tried (root).gotoAndStop(2); but i got an error , #1061 ..
Thanks in Advance...
ASAP would be nice..

well your a smart *** now arnt you Haha..
I missed 1 painful word in that line of code thanks heeps..

How do I reference a dynamically created MovieClip from another MovieClip?

Hi,
I'd be grateful for any pointers to the following problem:
     I'm having trouble referencing dynamically created MovieClips (links in a side panel on a Flash website, created from an XML file) from the current MovieClip (the currently selected link).
     I wish to freeze the the link/MovieClip in its mouseOver state once it has been clicked - this part works. When a new link/MovieClip is clicked on, I wish to release the previously clicked-on link from its mouseOver state, which is what I've so far been unable to do.
     My problem seems to be referencing the previous link/MoveClip. I've used the trace statement trace(MovieClip(this).name) to determine that the MovieClips are named item0, item1, item2 and so on. However, I've been unable thus far to reference the previous clip thus far. I've tried to trace the route to the MovieClip from the stage, and also tried MovieClip(parent).item0.gotoAndStop and lots of other different permutations, but to no avail. It's the fact they seem to be in a container called 'panel' which is defeating me.
     Here's a live version I've uploaded, which might explain the problem better. Click on "UBER UNS" in the top menu bar to get to the page in question. It's the links on the left-hand side (Historie, Unser Team, etc.) which are the problem. You'll see that once they've been clicked on they remain in their mouseOver state.
     This is the code in question on the fla file, which is a file I did not create myself. The parts in black work fine; it's the red parts where the problem lies:
import flash.display.MovieClip;
panel.buttonMode = true;
var lang:uint = 1;
var url_Link:String=MovieClip(root).program.websiteXML .language[lang].pages.titlePage[MovieClip(root).program.linkPage].texts.pageList.txt[numT XT].@link;
var urlPage:Number=Number(MovieClip(root).program.webs iteXML.language[lang].pages.titlePage[MovieClip(root).program.linkPage].texts.pageList.tx t[numTXT].@linkPage);
var request:URLRequest;
var linkIndex:uint;
var lastClickedLink:MovieClip;   //This is supposed to store the last link that has been clicked - it doesn't work
panel.addEventListener(MouseEvent.CLICK, clicLink);
panel.addEventListener(MouseEvent.ROLL_OVER, mouseOverLink);
panel.addEventListener(MouseEvent.ROLL_OUT, mouseOutLink);
function mouseOverLink(event:MouseEvent):void {
      MovieClip(this).gotoAndPlay('s1');
function mouseOutLink(event:MouseEvent):void {
      if(numTXT !== (linkIndex - 1)/5){         //freezes mouseOver state if this is the link for the current page
           MovieClip(this).gotoAndPlay('s2');
function clicLink(event:MouseEvent):void {
      var linkpage:uint = MovieClip(root).program.linkPage;
      if (url_Link) {
           request = new URLRequest(url_Link);
           navigateToURL(request);
      } else {
           linkIndex = numTXT * 5 + 1;
           if(linkpage == 1){
               MovieClip(root).chPages.cont.page_about_mc.page3Tu rner_mc.gotoAndStop([linkIndex]);
          } else if (linkpage == 2){
               MovieClip(root).chPages.cont.page3_mc.page3Turner_ mc.gotoAndStop([linkIndex]);
     lastClickedLink.gotoAndPlay('s2'); // this is supposed to release the previous clicked-on link from it's mouseOver state - doesn't work
     lastClickedLink = MovieClip(this).name;    //this is supposed to set the new link as the last link clicked after the old one has been released from it's mouseOver state - doesn't work
If anyone can help, that would be great.

What you might be after for that line is to use:
lastClickedLink = MovieClip(event.currentTarget);
For what you show, the name property of an object is a String, so I would expect you to be getting an error regarding trying to get a String to act like a MovieClip when you try to tell it to gotoAndPlay('s2').

Problem with .unload from an array

hello guys,
i'm really are clueless here pless do help me with this..,
so i load external swf and store the loader inside an array some of the loaded swf is mine and have method called destroy which used for optimazitation of Garbage COllection and someother are unknown swf (really unknown can be created from as1 or 2 or even 3 i just don;t know anything bout them) the loading and storing does work well.
Problem came when i tried to unload the the loaded swf,
so i tried to use SWFArray[i].unload() and all it gives me is :
Error #2025: The supplied DisplayObject must be a child of the caller
here is the code i used :
private function OnSWFLoadComplete(evt:Event):void
     evt.target.removeEventListener(Event.COMPLETE , OnSWFLoadComplete);
     //adding the loaded swf to it's container movieclip and then adding it to the mainContainer
     SWFContainer = new MovieClip();
     SWFContainer.addChild(SWFLoader.content);
     mainContainer.addChild(SWFContainer);
     if(myCounter < (totalSWF-1))
     myCounter++;
     loadSWF();
the code to load :
private function loadSWF():void
               SWFLoader = new Loader();
               SWFArray.push(SWFLoader);
               SWFLoader.contentLoaderInfo.addEventListener(Event.COMPLETE , OnSWFLoadComplete);
               SWFLoader.load(new URLRequest(SWFList[myCounter].@source));
the code onLoadComplete:
and after some point i wnat to clear the screen and remove this external swf especially the unknown swf from the memory not only from the stage
here is the code i use :
//removing external SWF that has been loaded
for(var i:Number = 0; i < totalSWF; i++)
     //some of the loaded swf is created by myself and have method/function called "destroy"
     //and the rest are totally unknown
     if (SWFArray[i].content.destroy)
          SWFArray[i].content.destroy();
     mainContainer.removeChildAt(0);
     SWFArray[i].unload();
this.stage.removeChild(mainContainer);
the line that is italized,bold, underlined are the one that i suspect cause the error..,
so can anyone help me solve this..,
or even tell me how to unload this dynamicly loaded external swf??
thanks in advanced guys

Andrei1 wrote:
I missed the fact that you do remove listeners.
The main point of my code sample is that it removes only children that exist on display list (while loop). Based on your original post it seems like the reason for the error is that you attempt to remove objects that are not on display list at the time you call removeChild().
nope the problem is definetly has connection with the loader, array and way to acces the .unload() from an array..,
why i so persistent about this??
because if i simply don't use the line "SWFArray[i].unload()"
and i did change the code into :
private function loadSWF():void
               var SWFLoader = new Loader();
               SWFArray.push(SWFLoader);
               SWFLoader.contentLoaderInfo.addEventListener(Event.COMPLETE , OnSWFLoadComplete);
               SWFLoader.load(new URLRequest(SWFList[myCounter].@source));
and still having the same problem..,

I recently lost my MacBook pro which was synched with my apple tv.Now I'm having a problem to bring back my data from my apple tv to my new MacBook

I recently lost my MacBook pro which was synched with my apple tv.Now I'm having a problem to bring back my data from my apple tv to my new MacBook

Welcome to the Apple community.
If you are referring to the first generation Apple TV, then you cannot sync content which is stored on its hard drive back to iTunes.

Problem calling AS3 class's methods from Flex Project

Sorry if this is a stupid question, but after 2 days of Web
searching and 2 books give up; I am a Java and c# programmer and am
having problems calling AS3 classes (in packages) from Flex Builder
2 Flex Projects; the AS3 classes work great as Flex Builder "AS3
Projects", but when I try to use the classes in a Flex Builder
"Flex Project" I am able to see and set their properties, but
cannot see (through "code completion") their methods (unless the
class extends another AS3 class; and in that case I can see the
base class's methods). Here is the code:
AS3 Example Class:
package asText {
public class CheckWord {
public var strData:String;
public var strAProperty:String;
public var intAProperty:int;
// Constructor
public function CheckWord() {
public function TestMethod():void {
trace("test...");
public function WordLength():int {
var intLength:int = 0;
trace(strData);
intLength = strData.length;
return intLength;
} // From Method WordLength
} // From Class CheckWord
} // From Package asText
The MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute"
width="442" height="488" horizontalAlign="center"
verticalAlign="middle"
backgroundGradientColors="[#c0c0c0, #c0c0c0]"
xmlns:asTheText="asText.*"
>
<asTheText:CheckWord strData="Test words" />
<mx:Panel title="Welcome to ........" width="337"
height="393" horizontalAlign="center" verticalAlign="middle"
layout="absolute" y="15" x="50">
<mx:Text text="First Name" enabled="true" width="68"
fontWeight="bold" x="27.25" y="36"/>
<mx:TextInput id="txtFName" x="112.25" y="34"/>
<mx:Text text="Last Name" enabled="true" width="68"
fontWeight="bold" x="27.25" y="66"/>
<mx:TextInput x="112.25" y="64" id="txtLName"/>
<mx:Text text="email address" enabled="true" width="87"
fontWeight="bold" x="17.25" y="96"/>
<mx:TextInput width="189" id="txtEmail" left="112.25"
top="94"/>
<mx:Button id="butSubmit" label="Submit" x="95" y="194"
click="asTheText:TestMethod();"/>
..............and so on ............
All this does is give me an 1180 error:
1180: Call to a possibly undefined method TestMethod.
flexConveyMovie1.mxml

Thanks, I have it working; I was not assigning an "ID" to the
"MXML use of the class" (whatever the formal name for that is;
like: <asTheText:CheckWord id="MyText" strData="The Data" />
) and then I was not referencing that ID in what I am refering to
as calling methods for the Class; like:
<mx:Button id="butTest" label="Test Function" x="39"
y="208" click="MyText.TestMethod();"/>
Also, I did some tests on this, and I am shocked that
apparently neither of these two "uses"(?) of a custom AS3 class
actually "call" the Class's constructor. Does that make sense or is
that the result of how I am structuring this?
Phil

Flash Player 10, strange problem with emdedded fonts and movieclips

Hello, developers! I have a big problem with font embedding
and I can not debug it myself. So I need you help.
I' ve done a simple list of attached movieclips with
textfields inside them, with embedded fonts. I have no problem with
flash player 9 in order to see the list, but in flash player 10 I
can't see it. The font is very common, Arial actually so you can
test it very easily. I am using a font symbol in the library, a
class and an xml file for my data.
Also you can see it online in (if you have flash player 10
you can't see a thing)
http://www.forestonfire.com//research/flash/fontproblem/index.html
I have compiled the file as an exe projector in order to see
it as I do in flash player 9
http://www.forestonfire.com//research/flash/fontproblem/fontinflash9.zip
I have zipped also the source code in order to compile it
yourself.
http://www.forestonfire.com/research/flash/fontproblem/fontembedded.zip
and the same example without embedded fonts (I have the same
problem there so perchaps are not the fonts)
http://www.forestonfire.com/research/flash/fontproblem/fontnotembed.zip
Please, check it and tell me if there is a solution
available. Thank you in advance.

I've included also a much more simple example without the xml
and the font symbol, only the class and a movieclip from the
library, but I can't still see it on flash player 10
http://www.forestonfire.com/research/flash/fontproblem/simplyfied.zip
I have no clue about this problem.

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

Problem in getting the database connection from a connection pool

Hai All,
I am facing a problem in getting the database connection from a connection pool created on weblogic server 8.1.
I am using the Oracle database 8.1.7.
I have configured my connection pool, datasource and JNDI in weblogic.
In my java program i have the following code to retrieve the connection.
import java.sql.*;
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.InitialContext;
class jdbcshp1 {
    public static void main(String[] args) {
     Connection connection = null;
     try {
           Hashtable ht = new Hashtable();
           ht.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory"); // Wanna get rid of this.
           ht.put(Context.PROVIDER_URL,"t3://localhost:7001"); // wanna get rid of this.
           // Get a context for the JNDI look up
           Context ctx = new InitialContext(ht);
        javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("myjndi1");
          //Create a connection object
          connection = ds.getConnection();
     The above code is working fine but, the two ht.put statements are creating problem.
The problem is, after converting the application into WAR file it can be deployed
on any machine or different port on same machine. My application fails if its deployed on
weglogicserver which is at different port.
Is there any way that i can get rid of those ht.put statements or any other way to solve the problem.
any help is appreciated.
Thanks in advance
Pooja.

Hai All,
Firstly, thanks for ur reply.
Even i have seen some code which uses context constructor with out any parameter and works fine.
i dont understand why its not working for my code.
When i remove those ht.put code and use context constructor with out any parameter, it giving an error.
Context ctx = new InitialContext();
javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup ("ocjndi");
connection = ds.getConnection();The error is as follows:
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
the above error is forcing me to include those code but if the port number is changed the code will not work. Plz let meknow if some setting have to be made.
I appreciate all ur valuable help.
Thanks once again.
Pooja.

Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

Good day,
I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

Good day abrieb93050306,
I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
This will probably resolve your issue.
Let me know if you still experience any issue.
Regards,
Aadesh

Problem referring to on-stage movieclips from an array

Similar Messages

Maybe you are looking for