Problem restricting Integration Directory object access

Hi All,
We are trying to restrict access to a group of objects in the Integration directory. In the tab "Party" i select the option as follows:
Selection Paths -
Operator - Include, Party - Service without party, Service - BSR_TEST
Objects -
Operator - Include , Type = *, Action - Change
However, this role when assigned to the user allows create and delete option as well. Also, if any other role is assigned to the user and then revoked, the restriction does not work (the role mentioned above gives an Insufficient authorization error even for the objects it is set to permit)
Our XI system version is 7.0 with SP level 17.
Thanks in advance for your inputs
Vijaya

Hi Abhishek,
Thanks again for your response. However any ideas as to why the role would stop working f user settings are changed?
Also, when i select the service using option - single selection and select multiple checkboxes (even 2) it does not work, where as if i add 2 rows with one value it is ok.
Let me know if i am missing something
Thanks
Vijaya

Similar Messages

Unable to activate PI - Integration Directory Objects

Hi Guys,
i am unable to activate PI - Integration Directory Objects.
when i'm trying to activate its taking too much time,then no response.
can any one pls help me on how to resolve this issue.
Thanks,
Siva.

Hi Siva,
Check with your basis guys.
In most cases, this is due to memory overflow error. They should free the memory which some interface or logs is holding up.
Most of these problems are solved by simply restart of the server.
I strongly suspect that some log file might be growing which would have consumed all memory.
Regards
Krish.

Problem with Integration Directory

Hi,
I have problem with Integration Directory while connecting it showing the fallowing Error.any body help me with some solution thanks in advance.
Application cannot be started!
Details: com.sap.engine.services.ejb.exceptions.deployment.EJBConfigurationException: Exception while reading index of JAR file aii_ibdir_sbeans.jar in application sap.com/com.sap.xi.directory from the Configuration.
 at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2322)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:370)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:323)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:118)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:219)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4345)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2465)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2338)
 at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:41)
 at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:141)
 at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
 at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:101)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Caused by: com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: -9,223,372,036,854,766,508,
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:83)
 at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:60)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:879)
 at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.getCachedConfiguration(ConfigurationHandlerImpl.java:371)
 at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getData(ReadAccessConfiguration.java:84)
 at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getConfigEntry(ReadAccessConfiguration.java:848)
 at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2320)
 ... 15 more
Caused by: java.sql.SQLException: [NWMss][SQLServer JDBC Driver]Connection reset by peer: socket write error
 at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
 at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
 at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
 at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCRequest.submitRequest(Unknown Source)
 at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCNonCursorExecuteRequest.submitExecute(Unknown Source)
 at com.sap.nwmss.jdbc.sqlserver.tds.TDSRPCExecuteRequest.execute(Unknown Source)
 at com.sap.nwmss.jdbc.sqlserver.SQLServerImplStatement.execute(Unknown Source)
 at com.sap.nwmss.jdbc.base.BaseStatement.commonExecute(Unknown Source)
 at com.sap.nwmss.jdbc.base.BaseStatement.executeQueryInternal(Unknown Source)
 at com.sap.nwmss.jdbc.base.BasePreparedStatement.executeQuery(Unknown Source)
 at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeQuery(BasicPreparedStatement.java:97)
 at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:270)
 at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:241)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration(DBAccessDefault.java:604)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:77)
 ... 21 more
Thanks
kiran.B

Kiran,
Start you J2EE engine visual administrator.
Choose Cluster--> server ---> services ---> deploy
Here there will be one application/service named "directory" (dont remember the exact name).Please start that service and your problem should be solved.
Thanks,
Anand

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

Transporting Integration Directory objects between N and N+1 landscapes

I have a question regarding the transport of Integration Directory objects.
We are implementing N+1 PI 7.3 (java only) Development and QA systems. The N+1 PI systems are a copy of the Production Support (N) PI Development and QA systems. As part of the N+1 build we will also configure the business systems in the SLD for this landscape. Is it possible to transport objects from the "N" landscape into the "N+1" landscape? These changes would only be new objects that would not overwrite anything in N+1. For anything that is also being changed in N+1 we would perform manually. Is there anything special needed when setting up the business system in the SLD for this scenario?
Thanks!

Thanks Barry
That menu option is available to me too but there is no option to use CTS+ in the pull down list.
I can't visit imageshack from work so I can't see your screenshot but I'd bet you have the option to export using "Open CTS+ Organizer" on the first menu too - I don't.
I've obviously got some config missing but, given I can transport ESR and SLD objects, I'm struggling to know what.
Edited by: Murray Nicholas on Sep 3, 2010 12:39 PM

Unable to Delete PI Integration Directory Objects

Hello Experts,
We are facing a strange problem in our system. When we wanted to delete some unwanted objects from Integration Directory from my user, I can't see any more in Object View, however can see in Change List with some X (red) mark before the object.
These objects are still remain and visible to other users in the respective scenarios.
When we try to delete from there, a confirmation pop-up dialog appears stating that data/object will be lost, when confirm (it says it is deleted) but remains in the change list.
We have verified in the object locked list, but there also nothing was locked.
Regards, Alex.

Hi,
You need to activate the change list where the deleted objects are present for the deletion to reflect in the runtime cache.
Also, if these deleted objects have been transported to higher environments, you would need to transport the deleted objects for the deletion to reflect in the higher environments as well.
To do this, when creating the transport, keep the check box "Include deleted objects checked". Then you can select the deleted objects to be included in your transported (deleted objects would be indicated with a bin icon).
Regards

Problem related Integration directory

Hi,
I am sending an IDoc from SAP R/3 to SAP XI . In WE02 IDoc showing Status as 03 (sucess) but in SM58 it showing as Error
1) No service for system SAPBQA, client 300 in Integration Directory
I checked the note 940313 but not able to resolve it.
2) I also found one problem that the software component added to business system but when I imported it to Integration directory then the "other attributes" tab of Business system shows no objects found meaning no software component is mentioned there.
Earlier it was running fine when XI was connceted with development. When we disconnected the Development and connected it to SAPBQA we are getting that problem.
We have also done cache refresh, CPA cache refresh etc.
Can anybody suggest the solution to my problem.

Hi,
"Message interface does not exist in any software components installed on this business system"
1) Open ID-----Double click on Business system that which u are using in the scenario
2) Check whether you are able to see the SWC in the Othere attributes TAB
3) If it is not there means goto SLD----Open the Technical System of R/3 by choosing Web as ABAp type
4) Click on Installed Products TAB
5) Click on Add New product and add your Product of the SWC whcih you are using for developement and Save it
6) Then goto Business systems TAB in the same Technical systems window and click on the Business System appears in the window.
7) Click on Installed products and Check the check box of your Product and then finally save that.
Now you should be able to see the SWC in the Othere attributes TAB in ID
Regards
Seshagiri

Error while importing the Integration Directory Objects

Hi,
I created one simple RFC to RFC scenario.We have only one XI system. after creation of this scenario I exported the Scenario from Integration Directory. Then I deleted the configuration scenario from Integration directory. Now I tried to import the TPZ file which was generated before the deletion of the objects in the integration directory. I get following error :
"No business system found on the application server (XXXXXXX, 00) for client 001"
XXXXXXX is our XI server.
Now if I create the Business system for client 001 in SLD for XI system and tried to import the TPZ file again, it works.
What could be the reason for this? Also Please let me know if I have to do any configuration before importing the TPZ file in same the same system to avoid the above error.
Highly Appreciate your valuable inputs.
Thanks,
Chandravadan

Hi Swarup,
Thanks for reply.
As you suggested, I did the SLD cache refresh and also whole cache refresh. But Still I get the above error. and if I create the business system for 001 client of XI system then it works.
My doubt is why I get error only for 001 client. There are also clients in XI system. and I have business system for client 600 of XI system as Integration server.
Thanks,
Chandravadan

Problem in Integration directory

I created a new object in integration directory.There is an option called to transfer integration scenario from integration repository.But i am not able to do it because my scenario does not appear in the menu.I activated my namespace in Integration repository.Can you please tell me the procedure to do it?

Hi,
You have to create a scenario by right click on Integration Scenario you have to map the flow source to adapter and adapter to target. After completion of all the things you upload it into ID.
Thanks,
RamuV

Problem in Integration Directory after transport

Guys,
we did a SLD transport (only LD objects), with DEV and PRD groups. It had some error messages because the SWCV's from the Dev XI were not created into PRD XI, but apparently, despite the errors, the products and SWCV's were created.
After that, we've done IR and ID objects transports, through File System.
Apparently, the IR part was OK.
In the ID, it correctly changed the Business Systems from Dev Configuration to their respective transport targets. However, if we try to open any Adapter, it gives an error message:
Attempt to access the 1 requested objects on 1 failed. Detailed information: com.sap.aii.ib.core.roa.RoaObjectAccessException: Unable to read object Adapter Metadata SOAP | http://sap.com/xi/XI/System (b38bcd00-e471-11d7-afac-de420a1145a5) of type AdapterMetaData from application REPOSITORY on system REPOSITORY. Detailed information: Software component version with GUID b38bcd00-e471-11d7-afac-de420a1145a5 does not exist
And if we try to create a new Adapter, when we go to select adapter type (SOAP, File, RFC etc) it says
Search Result for All Component Versions
No objects found!
So, we can't select any adapter type.
Has anyone had this error before?
What did we do wrong in the transport?
Was it the error from the SLD transport that caused this?
Thanks in advance,
Henrique.

Hi Henrique,
Go and import the SAP BASIS 6.4 or 7.0 Software COmponent Version into Integration Repository.
For this tpz file you can get from -
Copy XI3_0_SAP_BASIS_6.40_09_00.tpz from <Components DVD>/XI /XI_CONTENT to directory /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
cheers,
Prashanth
P.S Please mark helpful answers

Who know where store the data about integration Directory objects?

I met some problem which is difficult analysis how to design for ID and find channel status(active or inactive).
I just want to know currect table or stored mechanism.
who does know about this?

Thank your Ahmad.
I just know ID objects.
is it really access by ABAP stack?
I think only access to JAVA stack.
I want make this report.
current status :
Scenarion ABC
Business System
- A
- Channel A
- B
- Channel B
Receive Determination
- C
Interface Determination
- D
Sender Agreement
- E(A)
Receive Agreement
- F(B)
want make this report:
Scenarion ABC
Channel A - E - XI - C - D - F - Channel B

ABAP Table for Integration Directory Objects

Hi
Is there any ABAP table, which stores the runtime objects, communication channel, It's status, Service etc.
Where you can find out status of each channel and the channel type used within the ABAP stack in Data Dictionary table.
Replies apprecriated.
Swetank

Hi Paresh,
To view the status of adapters you can use RWB.
You dont need to write an ABAP report for this purpose.
RWB->Component Monitoring->Click on Displaye with status "all".
Then..click o Integration Server->Adapter Engine
click on 'Adapter monitoring' in the the 'Status' tab page of the window at the bottom of the screen.
This will launch a widow with status details of all the monitors.
Hope this info helps you.
praveen

Cache update problem in Integration Directory

Hi all,
We have a cache update problem in our PI development server.
If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
We have tried:
1. Clearing the SLD Data Cache.
2. Did SXI_CACHE complete refresh.
3. Did CPA cache refresh.
4. Did a complete cache refresh of the server.
5. Restarted the server.
But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
Thank you very much.
regards,
Jack Nuson

HI Jack ,
first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
Perform a full cache refresh using the URL
http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
Regards,
Saurabh

Integration Directory Objects Transport Using the File System

Hi
I am trying to do the IR and ID Objects Transport Using the File system... I am able to Transport the IR Objects and IMport in to QA ... but when i try to Import ID objects its giving me the error...bcoz all the ID objects pointing to theSAP R/3 DEV system ( Interface Detremination, receiver determination ...)... do i have to config something in SLD ..so when i import the ID objects in to QA system it points to correct SAP R/3 QAS system...
and we are using single SLD for all the DEV , QAS and PRD system
SV
Edited by: S V on Oct 15, 2008 4:08 AM

Hi,
You will have to configure transport targets like for different business systems in your dev environment, there shouls be corresponding Business systems in QUA environment. For more details refer the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Thanks!

After completion of Integration Directory Objects How to monitor my message

Hi,
After creation of configuratin objects how to check my XML message flow in runtime work bench.
Can u please explain in me step-by-step procedure.
Thanks & regards,
Pushparaju.B

Hi,
You can do this using:
1. Runtime Workbench
The adapters can be checked using Component Montoring>Display ALL button>Adapter Engine--> Communication channel
http://help.sap.com/saphelp_nw04/helpdata/en/25/9c2f3ffed33d67e10000000a114084/content.htm
Or message monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
2. Transaction SXMB_MONI in the ABAP Stack
Regards
Vijaya

Problem restricting Integration Directory object access

Similar Messages

Maybe you are looking for