Problem Sending Verizon Mail Using Mail Program

I have not had a problem sending Verizon mail from my Mail program prior to Mavericks. Now it is giving me fits. I do not have any troubke receiving mail.
This is what I get when I try and send mail through my Verizon account. Do I just check Always Trust and then Connect. There have been no Certificate issues prior to Maverick. What is going on? I did not get anything like this yesterday before I upgraded to Mavericks.

This is what I get when I try and send an e-mail using my Verizon account in mail.
Message was edited by: Stamper

Similar Messages

How to send mail using jsp program

am very new to jsp and doing my final year project. i need to send mails using my jsp program.can anyone say wht to do that is wht to include to send mails using jsp program. n also a sample code to send mail using jsp program.
Thanx in advance

Use below script.
<%@ page import="java.util.*, javax.mail.*, javax.mail.internet.*" %>
<%
Properties props = new Properties();
props.put("mail.smtp.host", "mailserver.com");
Session s = Session.getInstance(props,null);
InternetAddress from = new InternetAddress("[email protected]");
InternetAddress to = new InternetAddress([email protected]");
MimeMessage message = new MimeMessage(s);
message.setFrom(from);
message.addRecipient(Message.RecipientType.TO, to);
message.setSubject("Your subject");
message.setText("Your text");
Transport.send(message);
%>{code}

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

HT5225 unable to send receive mail using Mail 2.1.3

Ever since iCloud took over, I am no longer able to send/receive mail using Mail 2.1.3 on my 10.4.11 version. I didn't think it would affect it. Someone please help as to how I can rectify the issue!

Hi,
Please review the following note:
Note: 371830.1 - Notification Mailer Does Not Start, Remains In Status Starting
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371830.1
If the above does not help, I suggest you run "Workflow Diagnostics" test and see if it returns any error/warning messages.
Note: 274764.1 - Oracle Workflow Cartridge Workflow Java Mailer Setup Test
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=274764.1
Note: 378281.1 - How Does One Verify The Notification Mailer Is Functioning Properly?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=378281.1
Regards,
Hussein

Can't send e-mail using Mail. Entourage works fine with same settings.

I can't send e-mail using Mail. Using exactly the same settings on Entourage everything works fine.
Until earlier today (for two days only) I couldn't send either. I was advised to run Keychain Access First Aid which spotted "Item “pop3.freezone.co.uk” is a duplicate; this item's port attribute is not set" and then repaired it (Freezone is the name of my ISP). Now I can send Mail but not receive.
Even stranger is that until today I could receive Mail on one of my two accounts, while only Mail from one person got through on the other. Now no mail is arriving.
I tried swapping the plist file for an older version from a backup of my system. That didn't work either.
I'm tearing my hair out! Any suggestions?

No.
I'am sendig email from domain A using SMTP belonging to domain A.
The emails that's addressis is the same as senders (@grader.ee) are going out. But all others don't.
If there is wrong outgoing SMTP server even those emails can't send.

Receiving message"There was a problem sending the command to the program" every time I access a website using a desktop icon via Firefox.

When I click on a desktop icon and access a site via Firefox I get the message "There was a problem sending the command to the program". This started to happen after I downloaded the most recent version of Firefox. I uninstalled Firefox and reinstalled it and the message still comes up every time. The site will come up about three seconds after the message appears but the message is a real pain to put up with. What is the problem? I am ready to dump Firefox and go to Opera.

Hi bob1935-
I did some research and found a couple of previously answered questions that have multiple options for solving your problem. Please look at these:
- https://support.mozilla.com/en-US/questions/760489
- https://support.mozilla.com/en-US/questions/809976
I hope one of those fixes your issue!

File to Mail using Mail Package

Hello,
I have a requirement where we receive a csv file having mutiple columns, one of them being the email address.
I need to get this email address from the file and send this file as an attachment to the same email address.(Dynamic email address)
I have used the Mail xsd and have done graphical mapping to achieve this.
Now,the problem is,if I use Mail package for dynamic email address,I am not able to get the source file as an attachment because the payload here is a mail structure.
If I get source file as an attachment using PayloadSwapBean and MessageTransformBean,I cannot have dynamic email address.
Can anyone please suggest a solution to this?
Thanks in advance for your help.
Regards,
Shweta

Hi Stefan,
Thanks for the reply.
But I think,I am not able to understand the solution mentioned by you.
I can find following fields in ASMA mail adapter:
Meaning
Technical name
User
TServerLocation
Authentication Keys
TAuthKey
Mail header 'from' field
THeaderFROM
Mail header 'to' field
THeaderTO
Mail header 'Cc' field
THeaderCC
Mail header 'Bcc' field
THeaderBCC
Mail header 'subject' field
THeaderSUBJECT
Mail header field for reference to mail which is being replied to
THeaderIN-REPLY-TO
Mail header 'reply to' field
THeaderREPLY-TO
Mail header field for mail client program
THeaderX-MAILER
Mail header field for delivery acknowledgement
THeaderDISPOSITION-NOTIFICATION-TO
Mail header field for priority
THeaderPRIORITY
Mail header field for message importance
THeaderIMPORTANCE
I couldn't find a field related to attachments.
I can see the xml version of file in inbound message in SXI_MONITOR.
But after mapping,I get Mail package structure.
Could you please explain again.Sorry for this.
Thanks.
Regards,
Shweta

When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanow

Hi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support

Excel won't open and error message There was a problem sending the command to the programe

Hi there
I'd be grateful for your help.
I've just bought a new laptop and installed Office 2013. I used Excel 2013, did what I needed to do and saved it. This was 5 days ago.
Today, I've tried opening the file from my desktop and get the error message 'There was a problem sending the command to the program'.
And when I try to open Excel to do the DDE fix, which seems to be the best suggestion, I can't open Excel at all. I've tried to get into it from the Apps screen.
Any help would be gratefully appreciated.
Thanks

Don't seem like this can be fixed so I went back to version 6.0.2 which works good.
I have Chrome now as my default browser and will not use fire fox until they fix it!
Chrome works great!

Word2007 in windows 7 -There was a problem sending the command to the program!

I just bought my new HP laptop with windows 7 Home premier edition, and then I installed windows office 2007 suite. It's ok if I only open the word without any existing word file. But if I open word with a word file, it says " there was a problem sending
the command to the program". I try this action under safe mode, it's no problem, I can open an existing word file. If I open the winword.exe and use menu "file-open" to open a word file, it's alright. But If I double click a word file, it shows that error.
I tried to change the registry information according to the solution on internet, but it doesn't work. I checked the compatibility mode, it says run in "windows XP sp3", and it is grey, I can't uncheck it.
Anyone got any idea to fix this problem?
Thanks a lot.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, This sounds like a problem with the file associations in Windows.. If there is any misunderstanding, please feel free to let
me know.
The first thing to check is to make sure that the file extensions are correctly associated with Word.
1.
Click Start > type or copy following command to the Search box
"C:\Program Files\Microsoft Office\Office12\winword.exe" /unregserver
2.
You should then, immediately, use the following command:
"C:\Program Files\Microsoft Office\Office12\winword.exe" /regserver
Re-associate the Word file manually:
Please go to
Start \Control Panel\Programs\Default Programs\Set Associations.
Locate the files .doc, .docm,.docx, .dot, .dotm, check if there are associated with
Microsoft Word. If not, highlight the file and click the
Change Program button. Choose Microsoft Word from the list. If you are unable to see Microsoft Word from the list, click the
Browse button. Browse to the folder: C:\Program Files\Microsoft Office\Office12, and choose
WINWORD.EXE.
Click
OK to save the settings.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

When I open Firefox 4 RC1 by clicking an external link (as from my desktop) I get an error: "there was a problem sending the command to the program"

A box with this error: "there was a problem sending the command to the program" always pops up upon clicking any URL sitting in my desktop (or from any other folder). It will not happen if Firefox is already open. However, it is only an annoyance as the page fully opens with no problem.
It started after I downloaded Firefox 4 beta ver 12. It continued after upgraded with RC1. It did not happen in my latest version of Firefox 3.6.x which I removed after installing 4 RC1

This has happened to me many times but on the older FF 3 It could be a small bug, One should list the PC's being used as it could be related? Mine is an E-Machine Mod, W3609 running W7.

The icon for firefox is not working. "There was a problem sending the command to the program" pops up. Cannot get in to firefox

Since the upgrade, the icon does not work. Now this message comes up. I made Google my home page by following directions on this site. I deleted the old icon as it didnt work, and this new one came up on my desktop and it presented the message above.

Hi,
Before you open any of the applications, please go to Task Manager to see if their processes are stuck there. If so, shut them down and try again.
You can also try starting the applications in Safe Mode to determine if the problem is 3rd-party add-ins related.
Please refer to this article below to learn more:
http://office.microsoft.com/en-001/support/why-cant-i-start-my-office-2013-application-HA104011864.aspx
As for the Excel problem 'There was a problem sending the command to the program', please note when double-clicking an Excel workbook, a
dynamic data exchange (DDE) message is sent to Excel, instructing it to open the workbook that you double-clicked. If you
turn on the "Ignore other applications that use Dynamic Data Exchange (DDE)“ setting,
the DDE message sent to Excel by Windows Explorer is ignored, and Excel does not open the workbook that you double-clicked.
To automatically solve this issue , we recommend to run “Microsoft Fix it 20074” and follow the steps in the wizard:
http://support.microsoft.com/kb/211494/en-us
You can also try to fix it manually by the steps under 'Let me fix it myself'.
If the steps above don't help, we can try to repair Office from Control Panel -> Programs and Features to check the result.
Regards,
Melon Chen
TechNet Community Support

Can't down load mail using mail app

Can't down load mail using mail app OS, I already delete the com.apple.mail.plist but didn't work, it can connect to the server and in the progress bar, it appear: incoming messages ex. 39 of 39 but 0kb of transmission. And if I go to the Account info window, I can see the messages on the server, as well as the subject, date received, and the size of them. So, the mail, does connect to the server and see the new mail, but just doesn't download them. I also tried delete the mailbox and create a new one, but the same result.
If I use web mail I can see the mails.
Any clue to fix it.

Hi!
I have the same problem, when I go on apple store and look for the Netflix app, it won't found it and when I'm on google I'd tape Netflix app, I click on the link which opens AppStore and a message comes saying "your request cannot be found" please help!!! Thank you
Abi

There was a problem sending the command to the program

I get a message "There was a problem sending the command to the program". All of my Excel workbooks!

Hi
When you double-click an Excel workbook in Windows Explorer, a dynamic data exchange (DDE) message is sent to Excel, instructing it to open the workbook that you double-clicked.
If the Ignore other applications that use Dynamic Data Exchange (DDE) setting is selected, Excel ignores DDE messages sent to it by other programs. As a result, the DDE message sent to Excel by Windows Explorer is ignored,
and Excel does not open the workbook that you double-clicked.
To solve the problem, we recommend you go Office Button /
Excel Options / Advanced, and scroll all the way down to the
General section. There you will see the “Ignore other applications that use Dynamic Data Exchange (DDE)” setting checked. Uncheck the box, click OK to apply, and you’re good to go
For more information to solve the issue, please refer to the link below:
http://support.microsoft.com/kb/211494
Regards
Tylor Wang
TechNet Community Support

When going to a website from the desktop I get the followi ng message. "There was a problem sending the command to the program" Even though I get this messge, it still connects with the website/

When going from the desktop to a website, I get the following message. "There was a problem sending the command to the program" Even though I get this message, I still connect to the website.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

Problem Sending Verizon Mail Using Mail Program

Similar Messages

Maybe you are looking for