Problem setting XmlValue type throug PHP api

When i try to add metadata to a document and set its value to DATE_TIME i get an error:
Warning: xmlvalue::xmlvalue() expects exactly 1 parameter, 2 given in ...Code:
$v = new XmlValue(XmlValue_DATE_TIME, "2006-01-01T01:01:01");
Can i set specific metadata types through php?
Thank you.

Apply this patch to dbxml/src/php/php_dbxml_value.cpp and it will work.
Index: php_dbxml_value.cpp
===================================================================
RCS file: /a/CVSROOT/xml/src/php/php_dbxml_value.cpp,v
retrieving revision 1.16
diff -r1.16 php_dbxml_value.cpp
35c35,38
<
long type;
char *value;
int valueLen;
40,41c43
<   }
<   else if (SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "z!", &val)) {
} else if (SUCCESS == zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET, ZEND_NUM_ARGS() TSRMLS_CC, "z!", &val)) {43a46,48
} else if (SUCCESS == zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "ls", &type, &value, &valueLen)) {
This = XmlValue((XmlValue::Type)type, value);
php_dbxml_set_XmlValue_object_pointer(getThis(), This TSRMLS_CC);

Similar Messages

  • How to set container type in PHP

    Hello, I wanna to set the type of container to be XmlContainer::WholedocContainer. However it did not work, the php warnning "Fatal error: Undefined class constant 'WholedocContainer'". The book named The Definitive Guide to Berkeley DB XML told that the delimiter in php was replaced by underscore. But this guide leads php completely fall. How could I do to correctly set up the parameter? Thanks
    Edited by: user10993398 on Dec 14, 2009 5:36 PM

    Hi,
    Here is an example for dbxml-2.5.13:
    <?   
    function initDbXmlSystem()   
        global $_REQUEST;   
        $envName  = "./tmp";   
        $contName = "result.dbxml";   
        $env      = new Db4Env();   
        $env->open($envName);   
        $mgr = new XmlManager($env, DBXML_ALLOW_EXTERNAL_ACCESS);   
        $config = new XmlContainerConfig();   
        $config->setTransactional(true);   
        $config->setContainerType(XmlContainer_WholedocContainer);   
        $mgr->setDefaultContainerConfig($config);   
        $cont = $mgr->createContainer($contName);   
    initDbXmlSystem();   
    echo "DONE";   
    ?> 

  • Problems setting up an Apache PHP and MySQL server(slvd)

    I folowed this guide: http://wiki.archlinux.org/index.php/LAMP and I did everything it says and everything is working well... but when I try to install any CMS that uses MySQL, it says that mysql is not running... Even with Nmap, it only shows that apache is running... anyone knows why ?
    when I'm installing Xoops, it prints this error:
    Fatal error:
    mysql extension not loaded in /home/httpd/html/xoops-2.2.3a-final-xpr/html/class/database/mysqldatabase.php on line 74
    But, phpMyAdmin runs without any errors... this is so strange...
    Can anyone help me ?
    Thanks in advance

    I don't have any extension=mysql.dll in my php.ini.... I just have extension=mysql.so...
    Here's my <?
       phpinfo();
    ?>
    This is Arch Linux, running PHP.
    PHP Logo
    PHP Version 5.1.1
    System Linux localhost 2.6.15 #4 PREEMPT Mon Jan 9 13:16:27 CAT 2006 i686
    Build Date Dec 5 2005 11:31:11
    Configure Command './configure' '--with-apxs2' '--prefix=/usr' '--sysconfdir=/etc' '--with-layout=PHP' '--with-ttf' '--enable-mailparse' '--with-config-file-scan-dir=/etc' '--enable-bcmath=shared' '--enable-calendar=shared' '--enable-ftp=shared' '--enable-gd-native-ttf' '--enable-magic-quotes' '--enable-posix=shared' '--enable-session' '--enable-shared' '--enable-shmop=shared' '--enable-pdo=shared' '--enable-sqlite-utf8' '--enable-sockets=shared' '--enable-xml' '--enable-sysvsem=shared' '--enable-sysvshm=shared' '--enable-sysvmsg=shared' '--enable-track-vars' '--enable-trans-sid' '--enable-safe-mode' '--with-imap' '--with-imap-ssl' '--with-ncurses' '--with-readline' '--with-bz2=shared' '--with-curl' '--with-mime-magic' '--with-freetype-dir=/usr' '--with-gd=shared' '--enable-exif' '--with-jpeg-dir=/usr' '--enable-dba' '--without-db2' '--without-db3' '--with-inifile' '--with-flatfile' '--with-gdbm' '--with-ldap=shared' '--with-openssl' '--with-gettext' '--with-unixODBC=shared,/usr' '--with-pdo-odbc=shared,unixODBC,/usr' '--with-mysqli=shared' '--with-mysql-sock=/tmp/mysql.sock' '--with-pdo-mysql=shared,/usr' '--with-mysql=shared,/usr' '--with-pgsql=shared' '--with-pgsql-sock=/tmp/pgsql.sock' '--with-pdo-pgsql=shared,/usr' '--with-sqlite=shared' '--with-pdo-sqlite=shared,/usr' '--with-pear=/usr/share/pear' '--with-dom' '--with-dom-xslt' '--with-xsl' '--with-png-dir=/usr' '--with-regex=php' '--with-zlib' '--enable-mbstring=all' '--enable-mbregex'
    Server API Apache 2.0 Handler
    Virtual Directory Support disabled
    Configuration File (php.ini) Path /usr/lib
    Scan this dir for additional .ini files /etc
    additional .ini files parsed /etc/php.ini
    PHP API 20041225
    PHP Extension 20050922
    Zend Extension 220051025
    Debug Build no
    Thread Safety disabled
    Zend Memory Manager enabled
    IPv6 Support enabled
    Registered PHP Streams php, file, http, ftp, compress.zlib, https, ftps, compress.bzip2
    Registered Stream Socket Transports tcp, udp, unix, udg, ssl, sslv3, sslv2, tls
    Registered Stream Filters string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, convert.iconv.*, zlib.*, bzip2.*
    Zend logo This program makes use of the Zend Scripting Language Engine:
    Zend Engine v2.1.0, Copyright (c) 1998-2005 Zend Technologies
    PHP Credits
    Configuration
    PHP Core
    Directive Local Value Master Value
    allow_call_time_pass_reference On On
    allow_url_fopen On On
    always_populate_raw_post_data Off Off
    arg_separator.input & &
    arg_separator.output & &
    asp_tags Off Off
    auto_append_file no value no value
    auto_globals_jit On On
    auto_prepend_file no value no value
    browscap no value no value
    default_charset no value no value
    default_mimetype text/html text/html
    define_syslog_variables Off Off
    disable_classes no value no value
    disable_functions no value no value
    display_errors On On
    display_startup_errors Off Off
    doc_root no value no value
    docref_ext no value no value
    docref_root no value no value
    enable_dl On On
    error_append_string no value no value
    error_log no value no value
    error_prepend_string no value no value
    error_reporting 2039 2039
    expose_php On On
    extension_dir /usr/lib/php/extensions/php /usr/lib/php/extensions/php
    file_uploads On On
    highlight.bg #FFFFFF #FFFFFF
    highlight.comment #FF8000 #FF8000
    highlight.default #0000BB #0000BB
    highlight.html #000000 #000000
    highlight.keyword #007700 #007700
    highlight.string #DD0000 #DD0000
    html_errors On On
    ignore_repeated_errors Off Off
    ignore_repeated_source Off Off
    ignore_user_abort Off Off
    implicit_flush Off Off
    include_path .:/usr/share/pear .:/usr/share/pear
    log_errors Off Off
    log_errors_max_len 1024 1024
    magic_quotes_gpc On On
    magic_quotes_runtime Off Off
    magic_quotes_sybase Off Off
    mail.force_extra_parameters no value no value
    max_execution_time 30 30
    max_input_time 60 60
    open_basedir no value no value
    output_buffering no value no value
    output_handler no value no value
    post_max_size 8M 8M
    precision 12 12
    realpath_cache_size 16K 16K
    realpath_cache_ttl 120 120
    register_argc_argv On On
    register_globals Off Off
    register_long_arrays Off Off
    report_memleaks On On
    report_zend_debug On On
    safe_mode Off Off
    safe_mode_exec_dir no value no value
    safe_mode_gid Off Off
    safe_mode_include_dir no value no value
    sendmail_from [email protected] [email protected]
    sendmail_path /usr/sbin/sendmail -t -i /usr/sbin/sendmail -t -i
    serialize_precision 100 100
    short_open_tag On On
    SMTP localhost localhost
    smtp_port 25 25
    sql.safe_mode Off Off
    track_errors Off Off
    unserialize_callback_func no value no value
    upload_max_filesize 2M 2M
    upload_tmp_dir no value no value
    user_dir no value no value
    variables_order EGPCS EGPCS
    xmlrpc_error_number 0 0
    xmlrpc_errors Off Off
    y2k_compliance On On
    zend.ze1_compatibility_mode Off Off
    apache2handler
    Apache Version Apache
    Apache API Version 20020903
    Server Administrator [email protected]
    Hostname:Port laptop-do-joao.net:0
    User/Group nobody(99)/99
    Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100
    Timeouts Connection: 300 - Keep-Alive: 15
    Virtual Server No
    Server Root /usr
    Loaded Modules core prefork http_core mod_so mod_access mod_actions mod_alias mod_asis mod_auth mod_auth_anon mod_auth_dbm mod_auth_digest mod_autoindex mod_cgi mod_dav mod_dav_fs mod_dir mod_env mod_expires mod_ext_filter mod_headers mod_imap mod_include mod_info mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_speling mod_ssl mod_status mod_userdir mod_vhost_alias mod_php5
    Directive Local Value Master Value
    engine 1 1
    last_modified 0 0
    xbithack 0 0
    Apache Environment
    Variable Value
    HTTP_HOST laptop-do-joao.net
    HTTP_USER_AGENT Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8) Gecko/20060104 Firefox/1.5
    HTTP_ACCEPT text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
    HTTP_ACCEPT_LANGUAGE en-us,en;q=0.5
    HTTP_ACCEPT_ENCODING gzip,deflate
    HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.7
    HTTP_KEEP_ALIVE 300
    HTTP_CONNECTION keep-alive
    PATH /bin:/usr/bin:/sbin:/usr/sbin
    SERVER_SIGNATURE <address>Apache Server at laptop-do-joao.net Port 80</address>
    SERVER_SOFTWARE Apache
    SERVER_NAME laptop-do-joao.net
    SERVER_ADDR 127.0.0.1
    SERVER_PORT 80
    REMOTE_ADDR 127.0.0.1
    DOCUMENT_ROOT /home/httpd/html
    SERVER_ADMIN [email protected]
    SCRIPT_FILENAME /home/httpd/html/test.php
    REMOTE_PORT 33973
    GATEWAY_INTERFACE CGI/1.1
    SERVER_PROTOCOL HTTP/1.1
    REQUEST_METHOD GET
    QUERY_STRING no value
    REQUEST_URI /test.php
    SCRIPT_NAME /test.php
    HTTP Headers Information
    HTTP Request Headers
    HTTP Request GET /test.php HTTP/1.1
    Host laptop-do-joao.net
    User-Agent Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8) Gecko/20060104 Firefox/1.5
    Accept text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
    Accept-Language en-us,en;q=0.5
    Accept-Encoding gzip,deflate
    Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive 300
    Connection keep-alive
    HTTP Response Headers
    X-Powered-By PHP/5.1.1
    Keep-Alive timeout=15, max=100
    Connection Keep-Alive
    Transfer-Encoding chunked
    Content-Type text/html; charset=ISO-8859-1
    bcmath
    BCMath support enabled
    bz2
    BZip2 Support Enabled
    Stream Wrapper support compress.bz2://
    Stream Filter support bzip2.decompress, bzip2.compress
    BZip2 Version 1.0.3, 15-Feb-2005
    calendar
    Calendar support enabled
    ctype
    ctype functions enabled
    curl
    CURL support enabled
    CURL Information libcurl/7.15.0 OpenSSL/0.9.7h zlib/1.2.3
    date
    date/time support enabled
    Timezone Database Version 2005.14
    Timezone Database internal
    Default timezone Africa/Khartoum
    Directive Local Value Master Value
    date.timezone no value no value
    dba
    DBA support enabled
    Supported handlers gdbm cdb cdb_make inifile flatfile
    dom
    DOM/XML enabled
    DOM/XML API Version 20031129
    libxml Version 2.6.22
    HTML Support enabled
    XPath Support enabled
    XPointer Support enabled
    Schema Support enabled
    RelaxNG Support enabled
    exif
    EXIF Support enabled
    EXIF Version 1.4 $Id: exif.c,v 1.173.2.2 2005/10/10 06:09:25 helly Exp $
    Supported EXIF Version 0220
    Supported filetypes JPEG,TIFF
    ftp
    FTP support enabled
    gettext
    GetText Support enabled
    iconv
    iconv support enabled
    iconv implementation glibc
    iconv library version 2.3.5
    Directive Local Value Master Value
    iconv.input_encoding ISO-8859-1 ISO-8859-1
    iconv.internal_encoding ISO-8859-1 ISO-8859-1
    iconv.output_encoding ISO-8859-1 ISO-8859-1
    imap
    IMAP c-Client Version 2004
    SSL Support enabled
    libxml
    libXML support active
    libXML Version 2.6.22
    libXML streams enabled
    mbstring
    Multibyte Support enabled
    Multibyte string engine libmbfl
    Multibyte (japanese) regex support enabled
    Multibyte regex (oniguruma) version 3.7.1
    mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1.
    Directive Local Value Master Value
    mbstring.detect_order no value no value
    mbstring.encoding_translation Off Off
    mbstring.func_overload 0 0
    mbstring.http_input pass pass
    mbstring.http_output pass pass
    mbstring.internal_encoding ISO-8859-1 no value
    mbstring.language neutral neutral
    mbstring.substitute_character no value no value
    mime_magic
    mime_magic support enabled
    Directive Local Value Master Value
    mime_magic.debug Off Off
    mime_magic.magicfile /etc/httpd/conf/magic /etc/httpd/conf/magic
    mysql
    MySQL Support enabled
    Active Persistent Links 0
    Active Links 0
    Client API version 5.0.18
    MYSQL_MODULE_TYPE external
    MYSQL_SOCKET /tmp/mysql.sock
    MYSQL_INCLUDE -I/usr/include/mysql
    MYSQL_LIBS -L/usr/lib -lmysqlclient
    Directive Local Value Master Value
    mysql.allow_persistent On On
    mysql.connect_timeout 60 60
    mysql.default_host no value no value
    mysql.default_password no value no value
    mysql.default_port no value no value
    mysql.default_socket no value no value
    mysql.default_user no value no value
    mysql.max_links Unlimited Unlimited
    mysql.max_persistent Unlimited Unlimited
    mysql.trace_mode Off Off
    openssl
    OpenSSL support enabled
    OpenSSL Version OpenSSL 0.9.7h 11 Oct 2005
    pcre
    PCRE (Perl Compatible Regular Expressions) Support enabled
    PCRE Library Version 6.2 01-Aug-2005
    posix
    Revision $Revision: 1.70.2.1 $
    session
    Session Support enabled
    Registered save handlers files user
    Registered serializer handlers php php_binary
    Directive Local Value Master Value
    session.auto_start Off Off
    session.bug_compat_42 On On
    session.bug_compat_warn On On
    session.cache_expire 180 180
    session.cache_limiter nocache nocache
    session.cookie_domain no value no value
    session.cookie_lifetime 0 0
    session.cookie_path / /
    session.cookie_secure Off Off
    session.entropy_file no value no value
    session.entropy_length 0 0
    session.gc_divisor 100 100
    session.gc_maxlifetime 1440 1440
    session.gc_probability 1 1
    session.hash_bits_per_character 5 5
    session.hash_function 0 0
    session.name PHPSESSID PHPSESSID
    session.referer_check no value no value
    session.save_handler files files
    session.save_path /tmp /tmp
    session.serialize_handler php php
    session.use_cookies On On
    session.use_only_cookies Off Off
    session.use_trans_sid 0 0
    shmop
    shmop support enabled
    SimpleXML
    Simplexml support enabled
    Revision $Revision: 1.151.2.7 $
    Schema support enabled
    sockets
    Sockets Support enabled
    SPL
    SPL support enabled
    Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject
    Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilterIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RuntimeException, SimpleXMLIterator, SplFileObject, SplObjectStorage, UnderflowException, UnexpectedValueException
    standard
    Regex Library Bundled library enabled
    Dynamic Library Support enabled
    Path to sendmail /usr/sbin/sendmail -t -i
    Directive Local Value Master Value
    assert.active 1 1
    assert.bail 0 0
    assert.callback no value no value
    assert.quiet_eval 0 0
    assert.warning 1 1
    auto_detect_line_endings 0 0
    date.default_latitude 31.7667 31.7667
    date.default_longitude 35.2333 35.2333
    date.sunrise_zenith 90.83 90.83
    date.sunset_zenith 90.83 90.83
    default_socket_timeout 60 60
    safe_mode_allowed_env_vars PHP_ PHP_
    safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH
    url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset=
    user_agent no value no value
    tokenizer
    Tokenizer Support enabled
    xml
    XML Support active
    XML Namespace Support active
    libxml2 Version 2.6.22
    xsl
    XSL enabled
    libxslt Version 1.1.15
    libxslt compiled against libxml Version 2.6.21
    EXSLT enabled
    libexslt Version 1.1.15
    zlib
    ZLib Support enabled
    Stream Wrapper support compress.zlib://
    Stream Filter support zlib.inflate, zlib.deflate
    Compiled Version 1.2.3
    Linked Version 1.2.3
    Directive Local Value Master Value
    zlib.output_compression Off Off
    zlib.output_compression_level -1 -1
    zlib.output_handler no value no value
    Additional Modules
    Module Name
    sysvsem
    sysvshm
    Environment
    Variable Value
    CONSOLE /dev/console
    TERM linux
    LD_LIBRARY_PATH /usr/lib:
    INIT_VERSION sysvinit-2.86
    PATH /bin:/usr/bin:/sbin:/usr/sbin
    RUNLEVEL 5
    PWD /
    PREVLEVEL N
    SHLVL 3
    HOME /
    BOOT_IMAGE Arch-2.6.15
    _ /usr/sbin/httpd
    PHP Variables
    Variable Value
    _SERVER["HTTP_HOST"] laptop-do-joao.net
    _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8) Gecko/20060104 Firefox/1.5
    _SERVER["HTTP_ACCEPT"] text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
    _SERVER["HTTP_ACCEPT_LANGUAGE"] en-us,en;q=0.5
    _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate
    _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.7
    _SERVER["HTTP_KEEP_ALIVE"] 300
    _SERVER["HTTP_CONNECTION"] keep-alive
    _SERVER["PATH"] /bin:/usr/bin:/sbin:/usr/sbin
    _SERVER["SERVER_SIGNATURE"] <address>Apache Server at laptop-do-joao.net Port 80</address>
    _SERVER["SERVER_SOFTWARE"] Apache
    _SERVER["SERVER_NAME"] laptop-do-joao.net
    _SERVER["SERVER_ADDR"] 127.0.0.1
    _SERVER["SERVER_PORT"] 80
    _SERVER["REMOTE_ADDR"] 127.0.0.1
    _SERVER["DOCUMENT_ROOT"] /home/httpd/html
    _SERVER["SERVER_ADMIN"] [email protected]
    _SERVER["SCRIPT_FILENAME"] /home/httpd/html/test.php
    _SERVER["REMOTE_PORT"] 33973
    _SERVER["GATEWAY_INTERFACE"] CGI/1.1
    _SERVER["SERVER_PROTOCOL"] HTTP/1.1
    _SERVER["REQUEST_METHOD"] GET
    _SERVER["QUERY_STRING"] no value
    _SERVER["REQUEST_URI"] /test.php
    _SERVER["SCRIPT_NAME"] /test.php
    _SERVER["PHP_SELF"] /test.php
    _SERVER["REQUEST_TIME"] 1137274380
    _SERVER["argv"]
    Array
    _SERVER["argc"] 0
    _ENV["CONSOLE"] /dev/console
    _ENV["TERM"] linux
    _ENV["LD_LIBRARY_PATH"] /usr/lib:
    _ENV["INIT_VERSION"] sysvinit-2.86
    _ENV["PATH"] /bin:/usr/bin:/sbin:/usr/sbin
    _ENV["RUNLEVEL"] 5
    _ENV["PWD"] /
    _ENV["PREVLEVEL"] N
    _ENV["SHLVL"] 3
    _ENV["HOME"] /
    _ENV["BOOT_IMAGE"] Arch-2.6.15
    _ENV["_"] /usr/sbin/httpd
    PHP License
    This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE
    This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

  • I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the typ

    I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.

    Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
    I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available.

  • SoulseekQt not respecting set mime types in Openbox.

    Hi,
    I am having a strange problem with mime type handling in openbox.
    When opening files through SoulseekQt, instead of opening with VLC as my mime types are set to do it opens Audacity. And when opening the folders, it opens Gwenview instead of Thunar.
    I tried doing the same thing in xfce and it opened vlc, and thunar fine.
    Is there a file I need to edit for openbox specific mime types?
    Thanks for any help.

    My appologies for posting it into wrong forum. It should have been posted to Web Tier APIs > Java Servlet

  • Problems setting up an NFS server

    Hi everybody,
    I just completed my first arch install. :-)
    I have a desktop and a laptop, and I installed Arch on the desktop (the laptop runs Ubuntu 9.10). I had a few difficulties here and there, but I now have the system up and running, and I'm very happy.
    I have a problem setting up an NFS server. With Ubuntu everything was working, so I'm assuming that the Ubuntu machine (client) is set-up correctly. I'm trying to troubleshoot the arch box (server) now.
    I followed this wiki article: http://wiki.archlinux.org/index.php/Nfs
    Now, I have these problems:
    - when I start the daemons, I get:
    [root@myhost ~]# /etc/rc.d/rpcbind start
    :: Starting rpcbind [FAIL]
    [root@myhost ~]# /etc/rc.d/nfs-common start
    :: Starting rpc.statd daemon [FAIL]
    [root@myhost ~]# /etc/rc.d/nfs-server start
    :: Mounting nfsd filesystem [DONE]
    :: Exporting all directories [BUSY] exportfs: /etc/exports [3]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.1/24:/home".
    Assuming default behaviour ('no_subtree_check').
    NOTE: this default has changed since nfs-utils version 1.0.x
    [DONE]
    :: Starting rpc.nfsd daemon [FAIL]
    - If I mount the share on the client with "sudo mount 192.168.1.20:/home /media/desktop", IT IS mounted but I can't browse it because I have no privileges to access the home directory for the user.
    my /etc/exports looks like this:
    # /etc/exports: the access control list for filesystems which may be exported
    # to NFS clients. See exports(5).
    /home 192.168.1.1/24(rw,sync,all_squash,anonuid=99,anongid=99))
    /etc/conf.d/nfs-common.conf:
    # Parameters to be passed to nfs-common (nfs clients & server) init script.
    # If you do not set values for the NEED_ options, they will be attempted
    # autodetected; this should be sufficient for most people. Valid alternatives
    # for the NEED_ options are "yes" and "no".
    # Do you want to start the statd daemon? It is not needed for NFSv4.
    NEED_STATD=
    # Options to pass to rpc.statd.
    # See rpc.statd(8) for more details.
    # N.B. statd normally runs on both client and server, and run-time
    # options should be specified accordingly. Specifically, the Arch
    # NFS init scripts require the --no-notify flag on the server,
    # but not on the client e.g.
    # STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
    # STATD_OPTS="-p 32765 -o 32766" -> client
    STATD_OPTS="--no-notify"
    # Options to pass to sm-notify
    # e.g. SMNOTIFY_OPTS="-p 32764"
    SMNOTIFY_OPTS=""
    # Do you want to start the idmapd daemon? It is only needed for NFSv4.
    NEED_IDMAPD=
    # Options to pass to rpc.idmapd.
    # See rpc.idmapd(8) for more details.
    IDMAPD_OPTS=
    # Do you want to start the gssd daemon? It is required for Kerberos mounts.
    NEED_GSSD=
    # Options to pass to rpc.gssd.
    # See rpc.gssd(8) for more details.
    GSSD_OPTS=
    # Where to mount rpc_pipefs filesystem; the default is "/var/lib/nfs/rpc_pipefs".
    PIPEFS_MOUNTPOINT=
    # Options used to mount rpc_pipefs filesystem; the default is "defaults".
    PIPEFS_MOUNTOPTS=
    /etc/hosts.allow:
    nfsd: 192.168.1.0/255.255.255.0
    rpcbind: 192.168.1.0/255.255.255.0
    mountd: 192.168.1.0/255.255.255.0
    Any help would be very appreciated!

    Thanks, I finally got it working.
    I realized that even though both machines had the same group, my Ubuntu machine (client) group has GID 1000, while the Arch one has GID 1001. I created a group that has GID 1001 on the client, and now everything is working.
    I'm wondering why my Arch username and group both have 1001 rather than 1000 (which I suppose would be the default number for the first user created).
    Anyway, thanks again for your inputs.

  • Problems setting up static routing

    HI
    I'm having a problem setting up static routing.  I keep getting the message "invalid static route".   I have an E1550 router and my frimware is up to date.  I have tried a few different gateway addresses ie 192.168.1.1,  127.0.0.1 and my router's address on the net, but I keep getting the same message.  Has anyone else had this problem and been able to fix it?

    I think the E1550 router supports LAN to LAN routing provided that you have two local networks. If you only have a plain modem and the E1550, I believe you can't do Static routing on that type of setup. Found this link that might help: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=12a84336a124498eb5d6f0204b85191e_17589.xml&pid=80&...

  • Problems setting up JDBC

    I recently downloaded mysql Connector for my project.
    However, I have problems setting it up.
    When I run my program, It gives me a class not defined error.
    System.out.println("Registering Driver...");
                   Class.forName("com.mysql.jdbc.Driver").newInstance();
    System.out.println("Connected to database");
    System.out.println("Creating Connection");
    connection= DriverManager.getConnection("jdbc:mysql://localhost:8080/neuis");
    System.out.println("Connection created");
    catch(Exception ex)
    System.out.println("Error in loading jdbc Driver: "+ex);
    ex.printStackTrace();
    I have put the jar file of the JDBC Bridge in a folder
    C:\Drivers\Sql Connector
    I have also added the absolute path of the jar to the system classpath
    The value put in is:
    C:\Drivers\Sql Connector\mysql-connector-java-3.1.10-bin.jar.
    I am not sure what the problem is because I was told by the API that this was all I needed to do. Are there any other files I need to include with the jar file? Also, Is there a specific folder I must put it in?
    Thank you in advance.

    Hi,
    Take a look at the below link
    http://www.cs.nott.ac.uk/TSG/manuals/databases/mysql/jdbc.html
    may help you to setting up the jdbc with mysql
    regards
    MJ

  • Problems Setting up my wireless network with an Xb...

    Hi, I have had some problems setting up my wireless networking.
    I have everything switched on and am able to go online with the laptop and the Xbox with no problems but when I try to share media with the xbox I have problems.
    I have opened the ports specified in the setup from xbox on windows firewall and have no problem connection Via Ethernet cable but when using wireless the xbox cannot detect the laptop.
    I have checked the network map and both xbox and laptop are connected and have enabled sharing and am running sharing software.
    Below is the network map.
    I have also been having problems with BT software, the free virus protection will not install, The desktop help will not launch although it shows up on task manager and the installation disk does not launch correctly it doesn't get past the loading screen.
    I have had a printer on the wireless network and had no problems printing.
    If anyone knows how to resolve this please help.

    I have this same Motorola modem and I just verified that my 802.11n AirPort Express Base Station (AXn) can get Internet access with this modem without any issues.
    When changing ISPs (or networking equipment) it's always a good idea to start from "scratch" in configuring your equipment.
    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Power-up the modem; wait at least 10-15 minutes.
    Power-up the base station; wait at least 5-10 minutes.
    Power-up your computer(s).
    In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

  • Problems Setting up NFS

    Hi.
    I've been having problems setting up NFS on a LAN at home.  I've read through all the Arch NFS-related threads and looked at (and tried some of) the suggestions, but without success.
    What I'm trying to do is set up an NFS share on a wireless laptop to copy one user's files from the laptop to a wired workstation.  The laptop is running Libranet 2.8.1. The workstation is running Arch Linux with the most up-to-date (as of today) software, including NFS.
    I have the portmap, nfslock, and nfsd daemons running via rc.conf, set to run in that order.
    I've re-installed nfs-utils and set up hosts.deny as follows:
    # /etc/hosts.deny
    ALL: ALL
    # End of file
    and hosts.allow as follows:
    # /etc/hosts.allow
    ALL: 192.168.0.0/255.255.255.0
    ALL: LOCAL
    # End of file
    In other words, I want to allow access on the machine to anything running locally or on the LAN.
    I have the shared directories successfully exported from the laptop (192.168.0.3), but I have not been able to mount the exported directories on the workstation (192.168.0.2).
    The mount command I'm using at the workstation:
    mount -t nfs -o rsize=8192,wsize=8192 192.168.0.3:/exports /exports
    There is an /exports directory on both machines at root with root permissions. There is an /etc/exports file on the NFS server machine that gives asynchronous read/write permissions to 192.168.0.2 for the /exports directory.
    I receive the following message:
    mount: RPC: Program not registered
    This appears to be a hosts.allow/hosts.deny type problem, but I can't figure out what I need to do to make RPC work properly.
    Some additional information, just in case it's helpful:
    This is the result if running rpcinfo:
       program vers proto   port
        100000    2   tcp    111  portmapper
        100000    2   udp    111  portmapper
        100024    1   udp  32790  status
        100024    1   tcp  32835  status
        100003    2   udp   2049  nfs
        100003    3   udp   2049  nfs
        100003    4   udp   2049  nfs
        100003    2   tcp   2049  nfs
        100003    3   tcp   2049  nfs
        100003    4   tcp   2049  nfs
        100021    1   udp  32801  nlockmgr
        100021    3   udp  32801  nlockmgr
        100021    4   udp  32801  nlockmgr
        100021    1   tcp  32849  nlockmgr
        100021    3   tcp  32849  nlockmgr
        100021    4   tcp  32849  nlockmgr
        100005    3   udp    623  mountd
        100005    3   tcp    626  mountd
    Running ps shows that the following processes are running:
    portmap
    rpc.statd
    nfsd
    lockd
    rpciod
    rpc.mountd
    Thanks for any help here!
    Regards,
    Win

    Hi ravster.
    Thanks for the suggestions. I had read the Arch NFS HowTo and did as you suggested get rcpinfo for the server machine. The Libranet NFS server is configured rather different since the NFS daemons are built into the default kernel.
    Since I needed to complete the transfer immediately, I gave up for now trying to set up NFS and used netcat (!) instead to transfer the files from the Libranet laptop to the Arch workstation. The laptop will be converted to Arch Linux soon so I think I'll be able to clear things up soon.  I haven't had any problems setting up NFS with homogeneous (i.e., all Arch or all Libranet) computer combinations.
    Thanks again.
    Win

  • Problems setting up MPLS

    A Chairde,
    Am having problems setting up MPLS between a AS5350 and 7609 , I have used commands stated in this link, enable MPLS incrementally on a network.
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/switch_c/xcprt4/xcdtagc.pdf
    The commands below are added to each router, and some troubleshooting.
    7609
    ip cef distributed
    interface Loopback0
    ip address 192.168.254.1 255.255.255.255
    tag-switching advertise-tags
    interface GigabitEthernet3/12
    ip address 192.168.230.162 255.255.255.248
    mpls label protocol tdp
    tag-switching ip
    AS5350
    ip cef
    mpls label protocol tdp
    tag-switching advertise-tags
    interface Loopback0
    ip address 192.168.254.2 255.255.255.255
    interface FastEthernet0/0
    ip address 192.168.230.161 255.255.255.248
    duplex auto
    speed auto
    mpls ip
    h323-gateway voip interface
    h323-gateway voip id cnibhco111 ipaddr 192.168.230.129 1719
    h323-gateway voip h323-id cnibhco112
    h323-gateway voip tech-prefix 71401
    h323-gateway voip tech-prefix 0030
    h323-gateway voip bind srcaddr 192.168.230.161
    ip rsvp bandwidth 64 64
    cnibhco112#sh tag-switching tdp neighbor
    Peer TDP Ident: 192.168.254.1:0; Local TDP Ident 192.168.230.161:0
    TCP connection: 192.168.254.1.49842 - 192.168.230.161.711
    State: Oper; PIEs sent/rcvd: 18/23; Downstream
    Up time: 00:12:54
    TDP discovery sources:
    FastEthernet0/0, Src IP addr: 192.168.230.162
    Addresses bound to peer TDP Ident:
    192.168.100.17 192.168.100.25 159.107.212.49 172.16.8.81
    192.168.230.130 192.168.230.77 192.168.230.81 192.168.254.1
    192.168.210.6 192.168.127.6 192.168.210.106 192.168.127.66
    192.168.127.138 192.168.210.146 192.168.210.142 192.168.210.122
    192.168.210.17 192.168.230.140 192.168.230.26 192.168.230.74
    192.168.230.10 192.168.230.14 192.168.127.130 192.168.127.142
    192.168.230.6 192.168.230.70 192.168.230.34 192.168.210.178
    192.168.200.25 192.168.210.126 192.168.232.1 192.168.231.1
    192.168.200.17 192.168.210.102 190.168.200.245 190.168.200.225
    190.168.201.241 192.168.230.98 192.168.210.14 190.168.201.201
    190.168.201.209 192.168.210.162 192.168.210.210 190.168.201.205
    192.168.230.38 190.168.200.249 190.168.200.217 190.168.200.253
    192.168.230.162
    cnibhco112#
    cnibhco112#sh tag-switching forwarding-table 192.168.254.1 detail
    Local Outgoing Prefix Bytes tag Outgoing Next Hop
    tag tag or VC or Tunnel Id switched interface
    cnibhco112#traceroute 192.168.254.1
    Type escape sequence to abort.
    Tracing the route to 192.168.254.1
    1 192.168.230.162 0 msec 0 msec *
    cnibhco112#traceroute 192.168.230.162
    Type escape sequence to abort.
    Tracing the route to 192.168.230.162
    1 192.168.230.162 0 msec 0 msec *
    cnibhco112#

    Ro,
    Thanks for the respone, have been playin, with MPLS for last few hours.
    The routing between the loopbacks is now working, can PING 7609 Loopback from AS5350 ,and vice versa. (used static routes).
    Having problem with TDP / LDP on routers,
    mpls label protocol ldp / tdp command works correctly on both routers, but the
    tag-switching tdp router-id Loopback0 force
    command works on the 7609, but when I add it onto the AS5350 , the command "mpls ldp router-id Loopback0 force" appears on the startup script.
    The opposite is true for the 7609 , you add MPLS LDP command, and TAG-SWITCHING command appears instead.
    Any Ideas, as different configs of this leave me with forwarding table with both tags added, but not been able to ping the loopbacks !!!
    When I can ping bot loopbacks, the OUTGOING TAG , disapears.....
    Problem is LOOPBACK Commands on bot routers default to LDP (AS5350) , or TDP (7609). Any Ideas ...
    mpls label protocol tdp
    tag-switching tdp router-id Loopback0 force
    mpls label protocol tdp
    mpls ldp router-id Loopback0 force
    cnibhco100#sh tag-switching forwarding-table 192.168.254.2 detail
    Local Outgoing Prefix Bytes tag Outgoing Next Ho
    tag tag or VC or Tunnel Id switched interface
    18 17 192.168.254.0/24 0 Gi3/12 192.168.2
    MAC/Encaps=14/18, MRU=1500, Tag Stack{17}
    00097CA3293000127FCDBA808847 00011000
    No output feature configured
    Per-packet load-sharing
    cnibhco100#traceroute 192.168.254.2
    Type escape sequence to abort.
    Tracing the route to 192.168.254.2
    1 192.168.230.161 [MPLS: Label 17 Exp 0] 0 msec 0 msec 0 msec
    2 192.168.230.162 0 msec 0 msec 0 msec
    But no PINGING 192.168.254.2
    cnibhco112#sh tag-switching forwarding-table 192.168.254.1 detail
    Local Outgoing Prefix Bytes tag Outgoing Next Hop
    tag tag or VC or Tunnel Id switched interface
    17 18 192.168.254.0/24 1915668 Fa0/0 192.168.230.162
    MAC/Encaps=14/18, MRU=1500, Tag Stack{18}
    00127FCDBA8000097CA329308847 00012000
    No output feature configured
    Per-packet load-sharing
    cnibhco100#sh tag-switching forwarding-table 192.168.254.2 detail
    Local Outgoing Prefix Bytes tag Outgoing Next Ho
    tag tag or VC or Tunnel Id switched interface
    18 17 192.168.254.0/24 752551 Gi3/12 192.168.2
    MAC/Encaps=14/18, MRU=1500, Tag Stack{17}
    00097CA3293000127FCDBA808847 00011000
    No output feature configured
    Per-packet load-sharing
    WHEN BOTH LOCAL AND OUTGOING TAG, CANNOT PING EITHER WAY !!!
    HAVE LABEL PROTOCOL AND LOOPBACK FORCE on AS5350
    HAVE LABEL PROTOCOL ON 7609
    WHEN ADD LOOPBACK FORCE on 7609 , CAN PING BOTH LOOPBACKS,
    BUT OUTGOING TAG DISAPEARS
    cnibhco112#PING 192.168.254.2
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 192.168.254.2, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
    cnibhco112#sh tag-switching forwarding-table 192.168.254.1 detail
    Local Outgoing Prefix Bytes tag Outgoing Next Hop
    tag tag or VC or Tunnel Id switched interface
    17 Untagged 192.168.254.0/24 598678 Fa0/0 192.168.230.162
    MAC/Encaps=0/0, MRU=1504, Tag Stack{}
    No output feature configured
    Per-packet load-sharing
    cnibhco112#
    mpls label protocol tdp
    tag-switching tdp router-id Loopback0 force

  • Problems setting up a Domain - javax.management.InstanceNotFoundException

    I am having problems setting up a Domain. The following steps summarize
    what I have done.
    1. Created FooDomain in d:/bea/wlserver6.0/config and created
    appropriate config.xml, startup scripts, security, etc... (FooDomain
    boots ok)
    2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
    3. Connected to FooDomain via console (works ok).
    4. Defined machine FooMachine (happens to be localhost)
    5. Defined new server FooServer (in addition to default myserver) and
    assigned it to FooMachine.
    6. Created a new directory d:/managedServers/FooServer (note - outside
    installation directory)
    7. Created directories d:/managedServers/FooServer/logs &
    d:/managedServers/FooServer/applications
    8. Copied sample startManagedServer.cmd from mydomain to
    d:/managedServers/FooServer & modified appropriately.
    9. Ran startManagedServer.cmd (Note: I was able to connect to the
    Administration Server ok)
    The problems are as follows. (From the console - pointing to the
    Administration Server for the FooDomain)
    1. I am unable to configure a DefaultWebApp_FooServer to be located at
    d:/managedServers/FooServer/applications. I get the following exeption:
    javax.management.InstanceNotFoundException:
    FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
    2. I get a similar error when trying to set FooServer log locations to
    d:/managedServers/FooServer/logs
    Any ideas as to why? This then begs the question, what if FooServer was
    on a different physical server altogether. How would I define the
    location of the DefaultWebApp and logs.
    Thanks
    jay ()

    If you want your application work, think my way. At least, all my teammates have used this method to build their development environment. If you are more interested to debug for Weblogic, contact your support representative. The tools from Administration console look very nice, but not function as you want (e.g., the tool to convert version 5.1 application to version 6, even monitor tools). Administration console is very nice to be used to configue the parameters for a domain, but not so trustful and not for application setup in my own experience and that is why I suggest you use mydomain and DefaultWebApp_MyServer as templates. By the way, I did modify config.xml manually to change the default web application entry, etc, to what I want.
    Jay Zammit <[email protected]> wrote:
    I did not modify config.xml manually. In fact, I am able to boot both the Administration Server & Managed Server. The problem happens when using the Administration console to assign my logs and Default Applications directory to the d:/managedServers/FooServer/logs, and d:/managedServers/FooServer/applications/DefaultWebApp_FooServer directories. Try it yourself. Go to the Configurer WebApp option and type in a fully qualified directory such as d:/managedServers/FooServer/applications/DefaultWebApp_FooServer
    and see if it works on your system.
    thanks
    jay ()
    Xiang Rao wrote:
    One suggestion. Use the default domain mydomain as a template. Just make a copy of "mydomain" in folder config and rename the copy to whatever you like. Use some help tools to search all files (non-binary files) in new domain for key word "mydomain" and replace these words with your new domain name. To build an application, just rename the DefaultWebApp_MyServer to what you like and search "DefaultWebApp_MyServer" in all files (non-binary files) in your new domain and replace these words with yournew application name. Note you need to modify the scripts accordingly. Then you can run "startWeblogic" in your new domain directory to start your new domain. Other parameters should be configured by Administration console. If you manually modify configuration files, you could expect some bad news without reason.
    Jay Zammit <[email protected]> wrote:
    I am having problems setting up a Domain. The following steps summarize
    what I have done.
    1. Created FooDomain in d:/bea/wlserver6.0/config and created
    appropriate config.xml, startup scripts, security, etc... (FooDomain
    boots ok)
    2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
    3. Connected to FooDomain via console (works ok).
    4. Defined machine FooMachine (happens to be localhost)
    5. Defined new server FooServer (in addition to default myserver) and
    assigned it to FooMachine.
    6. Created a new directory d:/managedServers/FooServer (note - outside
    installation directory)
    7. Created directories d:/managedServers/FooServer/logs &
    d:/managedServers/FooServer/applications
    8. Copied sample startManagedServer.cmd from mydomain to
    d:/managedServers/FooServer & modified appropriately.
    9. Ran startManagedServer.cmd (Note: I was able to connect to the
    Administration Server ok)
    The problems are as follows. (From the console - pointing to the
    Administration Server for the FooDomain)
    1. I am unable to configure a DefaultWebApp_FooServer to be located at
    d:/managedServers/FooServer/applications. I get the following exeption:
    javax.management.InstanceNotFoundException:
    FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
    2. I get a similar error when trying to set FooServer log locations to
    d:/managedServers/FooServer/logs
    Any ideas as to why? This then begs the question, what if FooServer was
    on a different physical server altogether. How would I define the
    location of the DefaultWebApp and logs.
    Thanks
    jay ()

  • Problems setting up WRT54G2 router

    I'm having problems setting up my Linksys WRT54G2 router. I want my mac laptop (iBook G3 running OSX) to use a wireless connection, and the home computer (running Windows XP) to stay connected to the modem.
    I originally tried to set up the router by connecting it via ethernet to my laptop (and by ethernet to the modem), and went into the 192.168.1.1 address to configure it. The internet works fine on my laptop when connected to the wireless by ethernet but it can't connect wirelessly (it has an original airport card fitted, at first I thought I might need to upgrade the firmware but I ran a software update and one didn't come up). I then realised that I would need to MAC clone from the PC, that is connected to the modem? I tried to do this today, but I couldn't access the 192.168.1.1 address from the PC. I have tried resetting the router, and disabling the firewall but still can't access it. This PC also has anti-virus software running too - could this be the problem, or am I setting it up wrong? Thanks.

    If you are trying to Setup your Router with the setup disk, Then you can exit from the setup and configure your Router manually. Before you configure your router, you need to Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable.....
    You need to connect your Modem to Linksys Router on Internet Port and your Computer to Linksys Router on Port No.1.
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link
    Here are the Wireless Settings which you can set on your router, once done you can try connecting your MAC computer to your Wireless network and check if you are Online from MAC computer. 
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
    Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    -Here select manual configuration...Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Document types displayed as folders when arranged by set to type

    Hello everyone,
    I have an issue with the finder since upgraded to Lion.
    I use to open finder in column view with "Arranged by" set to "Type" and "Sort by" set to name. But the thing is that the titles/names of the document types are sometimes diplayed or behave as ordinary folders.
    Look at the snapshot below (sorry it's a french one): in the left column, display is fine. But in the middle one, "Dossiers", "Contacts", "Documents PDF" and "Documents" are displayed as ordinary folders.
    Note that the issue does not limit to the display. These non existing folders can be selected with my mouse.
    Moreover, it happens randomly and I checked on a new Account: issue is still there.
    So, as anyone observed that ?
    Thanks a lot,
    Nicolas.

    Sorry for the late reply, but yes this happens to me quite often.
    I have no solution to the problem, but it is rather annoying. Especially if you navigate from one column to another. The first file or folder does not get selected instead it is the "headline with the folder icon" that gets selected. Irritating and it looks terrible when highlighted.

  • Set Aggregation type of Count Distinct to use correct table aggregation in

    Hi there,
    Currently I use OBIEE 10.1.3.4.1 , and there is a case where a fact table consist of 2 logical table source: detail and aggregate table, which has some measure using count distinct as aggregation type. The problem is everytime I browse the measure with no dimension at all , it always use detail table not aggegation one..
    Really appreciate for any suggestion ..
    thanks a lot

    Hi,
    I don't think it's the same case as mine. Let say I have 2 table : detail and aggegate
    Detail Table consists 4 fields:
    *) Period
    *) Market
    *) Region
    *) Measure : Customer ID, Sales
    Aggregate Table consists 3 fields :
    *) Period
    *) Region
    *) Measure : Customer ID, Sales
    in the measure I set aggregation type for each field:
    *) Sales >> set as Sum
    *) Customer ID >> copy as "Number of Customer" and set as Count Distinct
    In each LTS' contents I set the level of aggregation using "Get Levels" feature..
    Then I try to browse via Presentation and do some querys belows:
    a) only choose single field of measure : Sales, the session shows that the value is taken from aggregation table and just as I expected.
    b) choose period and sales, the session shows that the values are taken from aggregation table, and still just as I expected.
    c) choose period, sales , and market, the session shows that the values are taken from detail table, just as I expected.
    d) only choose single field of measure : "Number of Customer", the session shows that the value is taken from detail table , this is NOT as I expected. It suppose to take the value from aggregation table..
    e) choose period and "Number of Customer", the session shows that the value is taken from detail table , this is also NOT as I expected. It suppose to take the value from aggregation table..
    I've tried to override the aggregation , but still confuse how to apply in measure "Number of Customer" and did not work at all..
    any idea ?
    thanks a lot

Maybe you are looking for

  • Error while raising Production Order

    Experts I get an error for a particular Item while raising a PRODUCTION ORDER 'Location Input does not match the warehouse location of Item' I work in SAP B1 2007B - PL 18 It will be great if someone can give me the reason/solution for the above ERRO

  • Adobe form to save data using Web Dynpro ABAP

    Hi. I am pretty new to SAP world and trying to learn and work on a task given to me relate to creating Adobe offline form using Web Dynpro ABAP same time. I have several questions and hopefully, many gurus like you will provide answers. I noticed the

  • Exporting to fixed length text using Crystal Enterprise 10

    Post Author: adamsueryan CA Forum: Deployment I would like to know if it is possible to export from Crystal Enterprise 10 to a fixed length text file similar to the text exporting option using Crystal Reports 8.5.  From Enterprise 10 I see you can ex

  • App error log

    I got a error message, job started step 001 started (programme SAPF110S , VARIANT AND USER ID LOG RUN ON PAYMENT PROPOSAL 13.10.09 IDENTIFICATION S INFORMATION VENDOR 2000021/CUSTOMER/PAYING CO CDE NUGN PAYMENT WITH CURRENCY INR PAYMENT METHOD C NO V

  • How to set focus on particular object.

    Hi All, I'm using Sales Dilevery form. On this form i have added a textfield for barcode. On Form load event I have set the focus on first textbox object i.e. customer code of the form by using the .click() method. Now in the lost focus of a barcode,