Problem to run executable in windows 7 64.

I developed an application using labview 8.5. Created an executable from it.
In windows XP i installed the labview runtime engine 8.5 and visa runtime and my EXE worked fine.
Tried the same on windows 7 64 and my application hangs the PC, tried the latest visa runtime with no success.
I basically uses a serial port (com 1) to comunicate witha device.
Tried to run it as windows xp compatible, same problem.
Any ideas?

Thanks for the reply.
Here is my setup:
the runtime for labview - LabVIEW85RuntimeEngineFull.exe
the visa runtime - visa501runtime.exe
and windows 7 64
The application was developed on labview 8.5
According to this URL (http://zone.ni.com/devzone/cda/tut/p/id/10383), the minimum versios of VISA is 4.6.
And checking your FAQ link i got this:
Q. Can I run an executable built with LabVIEW 32-bit on a 64-bit PC?
A. Windows can run 32-bit executables on a 64-bit PC. Therefore, the LabVIEW 32-bit Development System, Run-Time Engine, and executables can be run on Windows 64-bit.
I can send the file, its a stand alone executable, just click and run, no installation required.

Similar Messages

Problems In Running Executable File

I Have A LabView Program Where The Sub VI Is a VI Tempelate,(I Already Tried Using Reentrant Function Through A VI,But I Had Some Issues<Which Caused The Program To Not Work Correctly>, Hence The *VIT)
The Problem Is While Creating An Executable File
It Just Does Not Call The SUB VI
I Tried Changing The Path Name To Inside The Application.exe But Still No Luck
I Use Labview 2012

Hello,
Everyone, I guessed we meet the same issue.
During debug mode, the main program can load vit file by vit file path, the interface and function both are ok. as soon as I build all files to exe file, the program can work well but it just means function is ok, the interface invoved vit file all couldn't be showed normally.
I copied the original vit file to build package, there isn't any problem in Runing Executable File.
This is just one way to solve this problem. I don't think it's the best way, who can provide a better idea? which way is only to include vit file as other vi during build exe package, and anyone don't easy change original vit file, thanks!
Champion

Can login to Xmarks on Mac, 10.6.4, no problem, but running parallels and windows XP and Firefox on that, I can't login to Xmarks since it won't accept my password, and I'm asking who to contact to fix this problem with Xmarks?

If the question had been asked before, I would have read the answer. Can you make this support any more useless?
I'm trying to run Firefox on a Mac with Parallels and Windows XP. I can use Firefox, that's fine, what I can't do is sync my bookmarks. They are all synced on both macs, and my old PC, a really slow Dell L110, thus trying to use Parellels. Is there any way to contact someone who can look at why my log in to Xmarks won't work on Parallels? Or if there is a support page somewhere where one can actually get some answers, please let me know. Thanks, Rob Rand

Same issue - however firefox will open but I can not click on only of my tool bar shortcuts - the writing on the google age is greyed out so I can not click on anything. Still no resolution? I have deleted the folders and re-installed - it will open and then locks and it will not work????

Troubles with opening attachments when user have restristed priviledge to run executable code only from ProgramFiles and Windows folders.

I try to restrict users from executing any potentialy dangerous files. So according to Windows policies I set. Users can run any application from Program Files, Program Files (x86), Windows and all users' desktop folder. Users have no permission to write anything in this folders. When user duble clicks for example *.doc document on his desktop - document opens with MS Word just fine. But when user try to open this document from e-mail attachment directly (selecting open with MS Word, instead of saving) - he sees an error - "This action is restricted by local policy. Ask your system administrator." (not exact text).
So I want, users able to open attachments from Thunderbird automatically, but not able to run any application or link, except Program Files, Program Files (x86), Windows and all users' desktop folder. How can I get this result?
Thanks in advance.
Serious Diman.
P.S. Sorry for my bad english. It's not my native language.

Thanks for answering.
I found out what was happening.
This strange "bug" affects several computers with Windows 7 Ultimate in my case.
When you create SRP (software restriction policies) it creates two default rules for running programs: windows folder and Program Files folder. Manually I add "C:\Program Files (x86)" in unrestricted locations. BUT Windows and Program Files folder linked in default rules not directly, but through registry keys. And this part seems tricky. You CAN run executables from Program Files. You CAN run executables from Program Files (x86). But if Thunderbird or Firefox try to run MSword, or excel or writer for opening *.doc or *.odt or some other downloaded file - running from Program Files blocked by SRP.
So to resolve this problem you just need to replace rules for undirect paths like %HKLM/software/microsoft/windows ... etc% with direct ones, such as "C:/Windows" and "C:/Program Files/". After this all works fine. Attachments and downloaded files opens automatically without problems.

Running executable JARs from Windows

Hi!
I have this executable JAR file with no problems for running it from the Windows console using the "java -jar jarfile" command. But if I double click the same JAR file in Windows explorer I get a "Main class not found" error. Does anyone know what's happening here ?
Thanks in advance

I think the following varies somewhat depending on which Windows you are using. On Win 2000 in a Windows folder, select Tools menu, Folder Options and select File Types. Then select JAR and click on Advanced. Under Actions, there select "open" and click on Edit. For the Application, you should see something like "C:\Program Files\Java\j2re1.4.1_01\bin\javaw.exe" -jar "%1" %*

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

I am running CC on Windows 7. My Control key is sticking only in PPS. It is not a sticky key problem

I am running CC on Windows 7. My Control key is sticking only in PPS. It is not a sticky key problem and I am not running any similar program.

yes, photoshop.
Col. 3:17
Sam Collins

When I'm using Safari, acasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! ???

When I'm using Safari, ocasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! What the ****? Please help!

Right, like I'm trying to say, THERE IS NO SAFARI MENU bar. Example: I have multiple applications open, I click on a Photoshop window, the correct menu or title bar or whatever changes. Every other application window I click on brings up the correct "whatever" bar. If I click on the desktop, the "Finder Bar" shows up.
Everythiing else, BUT SAFARI, works the same way since OS X came out. This is ridiculous.
I'm getting the vibe that Apple is trying to get rid of the finder.... this is the way wrong direction.

Compile problem running jdev on Windows Terminal Server

I am experiencing problems compiling java source files in jdev 9.0.3.1035
Sometimes the class file is not created if i make (compile) only one source file.
The jdev is running on a Windows Terminal Server 2000.
The sources are on the same Terminal Server.
The classes should be compiled to the Terminal Server as well.
I am working on a Terminal session elsewhere.
Anyone had this problem before ?

Georg:
Q1) What you mean with 'the class file is not
created'? Is the .class file not overwritten? Is the
class file for a new file not written? Did you delete
the class file before compiling?I deleted the class file before compiling!
Q2) I guess that sources and classes are used by you
exclusively. Is this right?That is right!
Q3) In the project settings under Common | Input
Paths is the option 'Scan Source Path' enabled or
disabled?Both options have the same effect!
Q4) When the problem occurs: what is the active
window (code editor or Navigator)? What node is
selected in the Navigator?Tried following combinations:
- Having selected the Project node in the Navigator and the code editor is active window
- Having selected the class node in the Navigator and the code editor is active window
- Having selected the Project node in the Navigator and the Navigator is active window
- Having selected the class node in the Navigator and the Navigator is active window
Q5) What are the exact steps you took when it
happens? Do you use mouse or keyboard hotkeys? What
buttons or menus do you use?- right click in code editor and choose Make from popup menu
- right click on Long postings are being truncated to ~1 kB at this time.

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchsed a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears ro work but I am being told there are updates. I hav

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchased a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears to work but when I try to update, although I am being told there are updates it attempts to download the update but then tells me there is a problem and to quit and try again later.. I have tried a number of times to download the updates but itkeeps telling me to quit and try later. what is wrong please?

There could be a 32 bit vs 64 bit issues-is the old machine a 32 bit? and what is the new machine as far as 32/64 bit. I am not sure now if CS5 has in the help menu of the PS app the selection to update within PS if so that might work. I know that the Creative cloud app for installs updates etc has caused me much consternation over the last couple few years. Last it could be something like your Software firewall settings or anti-virus anti malware programs. I know that updating the infamous adobe flash that Internet Explorer pop ups setting and having AV turned on as opposed to off can interfere or plain break the update ability

System freezes due to hard disk problems only on Linux (not windows)

Intro/context:
Recently i've bought (about 2 months) a new laptop, a Lenovo G50-70, which came with Windows 8.1. As i had no interest on that OS, i formatted the disk and installed only Arch Linux. During that time i experienced system freezes which i had no idea why they were happening. As time went by, i found disk errors on system logs related to hard drive. I searched those errors and almost everything i found was that my hard drive had problems, so i decided to use my warranty. But first, i installed the original OS back again. And after using it a couple of weeks, i didn't experiencie any problem with my hard drive (on Linux it was really frequent). Now i've installed Arch Linux back, along with original Windows 8.1, having dual boot. There is no disk problem when using Windows, but when on Arch, i have the same errors and problems i used to have. So i assume it may be related to kernel or some confniguration issue.
I also haven't noticed any relation between system freezes and system use. I mean, it can happen either under light or heavy use.
tl dr: system freezes randomly for some minutes when using linux due to hard drive problems. The problem doesn't happen on windows.
What i've done so far:
The first period i was on Arch, i run smart (long and short), fsck, and hdparm tests. And nothing (no errors). Searched for bad blocks, and nothing. When back on windows, i also run tests on hdd and found no problems, except some sector reallocation not-that-nice indicators. These problems occured at the end of the first arch installation period. But still i currently experience no problem on windows.
I've also tried setting libata: noncq, 3.0G, noacpi, noapic kernel parameters, and had no result.
Changed BIOS setting from AHCI to Legacy, and no result. Also updated BIOS and no result.
I found no firmware update for this hard drive.
So i don't know what other thing i can try. I want to emphasize that there is no problem, no freezing, when running Windows, so i don't think it's a hard drive issue.
Info:
Hard drive is a Toshiba 2.5" HDD MQ01ABD100 5400 rpm.
Some logs i've recollected all this time:
journalctl -xfa --system
abr 21 13:51:13 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 13:51:24 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 21 13:51:24 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 7
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 13:51:24 echoes kernel: ata1.00: status: { DRDY }
abr 21 13:51:24 echoes kernel: ata1: hard resetting link
abr 21 13:51:24 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 13:51:24 echoes kernel: ata1.00: configured for UDMA/100
abr 21 13:51:24 echoes kernel: ata1: EH complete
abr 21 14:01:40 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 23 pio 512 in
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 22 pio 512 in
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 18
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:01:51 echoes udisksd[627]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/TOSHIBA_MQ01ABD100_Y44MT611T: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
dmesg
[55661.023028] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
[55661.023034] ata1.00: failed command: READ FPDMA QUEUED
[55661.023040] ata1.00: cmd 60/08:78:18:08:c0/00:00:4b:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[55661.023042] ata1.00: status: { DRDY }
[55661.023046] ata1: hard resetting link
[55666.358537] ata1: link is slow to respond, please be patient (ready=0)
[55671.053813] ata1: COMRESET failed (errno=-16)
[55671.053819] ata1: hard resetting link
[55676.389438] ata1: link is slow to respond, please be patient (ready=0)
[55678.897149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[55681.320305] ata1.00: configured for UDMA/100
[55681.320319] ata1.00: device reported invalid CHS sector 0
[55681.320349] ata1: EH complete
[55729.969443] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[55729.969588] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
dmesg
[102884.889930] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[102884.890305] systemd[1]: Unit systemd-journald.service entered failed state.
[102884.890333] systemd[1]: systemd-journald.service failed.
[102885.560745] systemd-coredump[28916]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.5bf9a012fed048ce8975998cf3c3c20e.6705.1427990901000000.
[102885.860957] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[102921.797810] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[104179.117363] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[104179.117369] ata1.00: failed command: READ FPDMA QUEUED
[104179.117375] ata1.00: cmd 60/08:00:48:88:8b/00:00:4d:00:00/40 tag 0 ncq 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[104179.117377] ata1.00: status: { DRDY }
[104179.117381] ata1: hard resetting link
[104184.453382] ata1: link is slow to respond, please be patient (ready=0)
[104189.149114] ata1: COMRESET failed (errno=-16)
[104189.149121] ata1: hard resetting link
[104189.469276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104189.952982] ata1.00: configured for UDMA/100
[104189.952989] ata1.00: device reported invalid CHS sector 0
[104189.953004] ata1: EH complete
[104508.223792] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[104508.223798] ata1.00: failed command: SMART
[104508.223803] ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 2
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[104508.223806] ata1.00: status: { DRDY }
[104508.223810] ata1: hard resetting link
[104509.984601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104510.698126] ata1.00: configured for UDMA/100
[104510.698157] ata1: EH complete
One of the latest and worse
journalctl -xfa --system
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:00:e0:d6:75/00:00:00:00:00/40 tag 0 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:08:08:d8:75/00:00:00:00:00/40 tag 1 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:10:30:d9:75/00:00:00:00:00/40 tag 2 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:18:58:da:75/00:00:00:00:00/40 tag 3 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:20:e8:e5:75/00:00:00:00:00/40 tag 4 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:28:80:db:75/00:00:00:00:00/40 tag 5 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:30:68:dd:75/00:00:00:00:00/40 tag 6 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:38:90:de:75/00:00:00:00:00/40 tag 7 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:40:b8:df:75/00:00:00:00:00/40 tag 8 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:48:90:e1:75/00:00:00:00:00/40 tag 9 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:50:98:e3:75/00:00:00:00:00/40 tag 10 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:58:c0:e4:75/00:00:00:00:00/40 tag 11 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/c8:78:28:b9:2a/0b:00:4e:00:00/40 tag 15 ncq 1544192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:80:b0:4b:c0/00:00:4f:00:00/40 tag 16 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:88:90:4b:80/00:00:50:00:00/40 tag 17 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:90:98:22:81/00:00:50:00:00/40 tag 18 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:98:00:0e:00/00:00:5f:00:00/40 tag 19 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a0:00:08:80/00:00:5f:00:00/40 tag 20 ncq 4096 out
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a8:80:08:80/00:00:5f:00:00/40 tag 21 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:b0:08:0b:81/00:00:5f:00:00/40 tag 22 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:b8:70:c8:75/00:00:00:00:00/40 tag 23 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c0:20:c9:75/00:00:00:00:00/40 tag 24 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c8:88:c9:75/00:00:00:00:00/40 tag 25 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d0:58:ca:75/00:00:00:00:00/40 tag 26 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d8:a0:ce:75/00:00:00:00:00/40 tag 27 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e0:68:d3:75/00:00:00:00:00/40 tag 28 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e8:90:d4:75/00:00:00:00:00/40 tag 29 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:f0:b8:d5:75/00:00:00:00:00/40 tag 30 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 12 88 d7 c0 00 04 d0 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 310958016
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 36311758 (offset 8388608 size 2695168 starting block 38869906)
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995128
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995129
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995130
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995131
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995132
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995133
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995134
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995135
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995136
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995137
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4b dd 39 88 00 01 78 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1272789384
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 34999445 (offset 0 size 192512 starting block 159098720)
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4e 2a b3 e8 00 05 40 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1311421416
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 35001016 (offset 0 size 2232320 starting block 163927845)
abr 22 12:57:11 echoes kernel: ata1: EH complete
abr 22 12:57:11 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 22 12:57:11 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 22 12:57:11 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 25
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1: EH complete
Current smart status:
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.1-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: Y44MT611T
LU WWN Device Id: 5 000039 5e1a80e85
Firmware Version: AX1P5E
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun May 3 16:42:06 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 234) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1671
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 306
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 152
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 699
10 Spin_Retry_Count 0x0033 106 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 216
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 14140
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 16/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 19
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 515
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 190
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0x50) Completed without error 00% 611 -
# 2 Short offline Completed without error 00% 611 -
# 3 Short offline Completed without error 00% 597 -
# 4 Vendor (0x50) Completed without error 00% 583 -
# 5 Short offline Completed without error 00% 583 -
# 6 Vendor (0x50) Completed without error 00% 575 -
# 7 Short offline Completed without error 00% 575 -
# 8 Short offline Completed without error 00% 547 -
# 9 Extended offline Completed without error 00% 529 -
#10 Short offline Completed without error 00% 355 -
#11 Short offline Completed without error 00% 355 -
#12 Extended offline Aborted by host 70% 355 -
#13 Short offline Completed without error 00% 319 -
#14 Vendor (0x50) Completed without error 00% 13 -
#15 Short offline Completed without error 00% 13 -
#16 Short offline Completed without error 00% 12 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kernels used have been from 3.9 to current: Linux echoes 4.0.1-1-ARCH #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 x86_64 GNU/Linux
Last edited by jesu (2015-05-03 19:42:53)

Something i'd noticed both the first time i was on arch and now i've reinstalled it, was that at first i didn't have this problem. I mean, when Arch was just installed. While i was installing and setting up everything.
Now, i'm not 100% sure about this, but i think problems began when using my current user. Disk is partitioned the following way:
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1000M 0 part
├─sda2 8:2 0 260M 0 part /boot
├─sda3 8:3 0 207,7G 0 part
├─sda4 8:4 0 25G 0 part
├─sda5 8:5 0 14,8G 0 part
├─sda6 8:6 0 80,5G 0 part /
├─sda8 8:8 0 599G 0 part /home
└─sda9 8:9 0 2G 0 part [SWAP]
So, i believe problems, for some reason, are related (and were related), both before and now, to the /home partition, /dev/sda8 in this ocassion.
Because of this, i booted into systemd rescue mode, like root, rw, and unmounted /home partition. Despite root-only limitations, i used the system for a couple of hours, started lxqt, browsed the web mainly, and experienced no problem at all.
Now i booted normally, with my regular user, and these problems are experienced just like before (and almost instantly, like 3 or 5 minutes after starting system use).
dmesg this time showed a some different log, though it's not the first time i see this. I just didn't saved that kind of log before.
[ 653.821719] ata1.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x6 frozen
[ 653.821726] ata1.00: failed command: READ FPDMA QUEUED
[ 653.821732] ata1.00: cmd 60/08:40:60:25:43/00:00:1b:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 653.821735] ata1.00: status: { DRDY }
[ 653.821739] ata1: hard resetting link
[ 659.156760] ata1: link is slow to respond, please be patient (ready=0)
[ 663.851604] ata1: COMRESET failed (errno=-16)
[ 663.851610] ata1: hard resetting link
[ 669.186591] ata1: link is slow to respond, please be patient (ready=0)
[ 673.881456] ata1: COMRESET failed (errno=-16)
[ 673.881462] ata1: hard resetting link
[ 679.216481] ata1: link is slow to respond, please be patient (ready=0)
[ 702.743982] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 703.012578] ata1.00: configured for UDMA/100
[ 703.012584] ata1.00: device reported invalid CHS sector 0
[ 703.012599] ata1: EH complete
[ 714.097642] systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!
[ 742.443488] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443494] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 28 c3 c6 40 00 00 10 00
[ 742.443497] blk_update_request: I/O error, dev sda, sector 683918912
[ 742.443503] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489866)
[ 742.443506] Buffer I/O error on device sda8, logical block 9323208
[ 742.443508] Buffer I/O error on device sda8, logical block 9323209
[ 742.443515] sd 0:0:0:0: [sda] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443518] sd 0:0:0:0: [sda] tag#19 CDB: opcode=0x2a 2a 00 28 c3 c6 80 00 00 10 00
[ 742.443520] blk_update_request: I/O error, dev sda, sector 683918976
[ 742.443522] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489874)
[ 742.443524] Buffer I/O error on device sda8, logical block 9323216
[ 742.443526] Buffer I/O error on device sda8, logical block 9323217
[ 742.443531] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443534] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 28 c3 c6 d0 00 00 10 00
[ 742.443536] blk_update_request: I/O error, dev sda, sector 683919056
[ 742.443538] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489884)
[ 742.443540] Buffer I/O error on device sda8, logical block 9323226
[ 742.443542] Buffer I/O error on device sda8, logical block 9323227
[ 742.443547] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443549] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 28 c3 c7 10 00 00 10 00
[ 742.443551] blk_update_request: I/O error, dev sda, sector 683919120
[ 742.443553] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489892)
[ 742.443555] Buffer I/O error on device sda8, logical block 9323234
[ 742.443557] Buffer I/O error on device sda8, logical block 9323235
[ 756.187685] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[ 756.187986] systemd[1]: Unit systemd-journald.service entered failed state.
[ 756.188116] systemd[1]: systemd-journald.service failed.
[ 756.188474] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 756.189106] systemd[1]: Stopping Flush Journal to Persistent Storage...
[ 756.189143] systemd[1]: Listening on Journal Audit Socket.
[ 756.189801] systemd[1]: Starting Journal Service...
[ 757.525493] systemd-coredump[1038]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.b8610e85f9074a418534aaee0adbac56.141.1430763073000000.lz4.
[ 758.133944] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 758.503041] systemd[1]: Started Journal Service.
[ 759.180771] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 974.867721] ata1.00: exception Emask 0x0 SAct 0x3f80 SErr 0x0 action 0x6 frozen
[ 974.867732] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867742] ata1.00: cmd 61/08:38:68:d3:c5/00:00:1a:00:00/40 tag 7 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867747] ata1.00: status: { DRDY }
[ 974.867751] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867759] ata1.00: cmd 61/08:40:88:d3:c5/00:00:1a:00:00/40 tag 8 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867763] ata1.00: status: { DRDY }
[ 974.867767] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867774] ata1.00: cmd 61/08:48:a0:d3:c5/00:00:1a:00:00/40 tag 9 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867778] ata1.00: status: { DRDY }
[ 974.867781] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867789] ata1.00: cmd 61/20:50:c0:d3:c5/00:00:1a:00:00/40 tag 10 ncq 16384 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867793] ata1.00: status: { DRDY }
[ 974.867796] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867803] ata1.00: cmd 61/10:58:f0:d3:c5/00:00:1a:00:00/40 tag 11 ncq 8192 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867807] ata1.00: status: { DRDY }
[ 974.867810] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867817] ata1.00: cmd 61/08:60:10:d4:c5/00:00:1a:00:00/40 tag 12 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867821] ata1.00: status: { DRDY }
[ 974.867824] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867831] ata1.00: cmd 61/18:68:28:d4:c5/00:00:1a:00:00/40 tag 13 ncq 12288 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867835] ata1.00: status: { DRDY }
[ 974.867841] ata1: hard resetting link
[ 980.202774] ata1: link is slow to respond, please be patient (ready=0)
[ 984.900902] ata1: COMRESET failed (errno=-16)
[ 984.900908] ata1: hard resetting link
[ 990.236024] ata1: link is slow to respond, please be patient (ready=0)
[ 994.930829] ata1: COMRESET failed (errno=-16)
[ 994.930836] ata1: hard resetting link
[ 996.798104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 997.014012] ata1.00: configured for UDMA/100
[ 997.014020] ata1.00: device reported invalid CHS sector 0
[ 997.014023] ata1.00: device reported invalid CHS sector 0
[ 997.014025] ata1.00: device reported invalid CHS sector 0
[ 997.014026] ata1.00: device reported invalid CHS sector 0
[ 997.014028] ata1.00: device reported invalid CHS sector 0
[ 997.014030] ata1.00: device reported invalid CHS sector 0
[ 997.014031] ata1.00: device reported invalid CHS sector 0
[ 997.014065] ata1: EH complete
There are some sda8 (home) related messages. I also found these messages first time Arch was installed (i think also related to home partition).
root and home partitions are both ext4.

Problems with Comodo Kill Switch, Windows Services & Bitlocker Encryption on Asus N56VZ

Hi All,
So recently I found myself stuck in a different scenario than before, and after many hours researching and efforts to fix this I still find myself stuck yet with a few options still to fix.
What is the problem?
So as a security cautious user when i first got to Windows 8.1 Pro 64Bit I encrypted both the C and D drive (Split the main disk) to protect myself and my family. Unfortunately that has not been very helpful with the way in which booting and running from
either external USB devices or CD/DVD works, not allowing myself to at all.
My usual security suit I use is Comodo Internet Security, which additionally comes with Comodo Kill Switch. Whilst using the application instead of stopping one of the TCP connections I was meant to I accidently stopped an Windows Explorer connection.
For some reason since then Windows Explorer, nor most windows apps or services themselves will run. For example msconfig will run but sfc /scannow or mmc will not, whether in safe mode or normal mode.
What Caused the Problem?
Cannot 100% say
What I Think Caused the Problem?
Myself running Comodo Kill Switch stopping a vital server connection with Windows Explorer that messed up alot. Or a potential Virus unknown how cannot fully scan system as wont boot externally or run many apps.
Additional Info
Asus Webcam is Disabled on Purpose
Laptop was fully customized to run latest games full graphics minus Anti Aliasing, works with Evolve + CoD Advanced Warfare
Laptop does not boot if USB Keyboard plugged in, works with everything else normal (had this on other systems no problem for me)
Ask me for more info if required to add here, braindead again
Specifications of my system
Intel® Core™ i7 3610QM Processor
Windows 8.1 Pro 64Bit
Intel® HM76 Chipset
DDR3 1600 MHz SDRAM, 2 x SO-DIMM 8GB
15.6" HD (1366x768)/Full HD (1920x1080)/Wide View Angle LED Backlight
NVIDIA® GeForce® GT 650M with 2GB DDR3 VRAM
1TB 5400RPM OR 750GB 5400/7200RPM (Cannot remember off top of head, braindead)
Super-Multi DVD
Kensington lock (Security Feature)
LoJack (Security Feature)
BIOS Booting User Password Protection (Security Feature)
HDD User Password Protection and Security (Security Feature)
Pre-OS Authentication by programmable key code (Security Feature)
What Can Run and Won't Run?
ON BOOT:
Bitlocker Encryption Password & Advanced Settings are accessible
Bios (password protected) is accessible
Windows Recovery Mode is accessible (Think it is F9 or F10)
Windows Logon Password Screen is accessible
ON NORMAL/SAFE-MODE START UP:
After Log-In Windows Explorer will not run
Task Manager will run, also allows me to browse the files when trying to start new task
Can run Command prompt
Cannot run any control panel items
Cannot run services.msc
Cannot run mmc
Cannot run sfc
Every time it metions windows drive is locked
Start Error's when running certain applications (Will post codes soon)
Rufus USB Tool does run
Cannot boot Kali Linux off USB
Cannot boot Windows 8.1 off USB
Cannot boot Windows 8.1 off DVDRW
Fixwin2 will not run
Apps either work or don't whether in safe mode or normal
Cannot use Windows Installer
What Fixes I Have Tried So Far
Ok so like any normal user I don't want to lose my files. So here are what I have tried so far:
Repair MBR (Repair Completed, No Luck)
SFC /SCANNOW (Returns Error 'Windows Resource Protection could not start the repair service')
Tried sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows (Could not access drive)
Fixwin2 (Will not run in either normal or safe mode)
Booting using Windows 8.1 via USB (Cannot boot from extermal devices due to Bitlocker Encryption)
Booting using Kali Linux Via DVD & USB (Cannot boot from external devices due to Bitlocker Encrytption)
How do I know it is because of Bitlocker, because last time I disabled it, I could run from external devices
Tried to run bitlocker to change settings (Will not run)
Have used both password and recovery keys to unlock driver, they work but when applications are running on windows the drive is still locked?
Tried windows Automatic Diagnostic and Repair (Could not repair anything, did make a log I am still to extract from the syste)
There are No System Restore Points
I'm sure there is much more information I could post however I will leave it on an ask to know basis, apart from the log files and further information to gather. Below is my list of trial and error fixes to try for today (need more ideas and help please!):
Hiren's 15.2 Boot CD via DVD (NOT ABLE TO BOOT)
Hiren's 15.2 Boot CD via USB (NOT ABLE TO BOOT)
Research into the Bios and Possible Update in-case of implementation of Virus, can access flash utility (STILL NOT TESTED)
Try and get a portable version or a working version of windows installer to try and re-install Comodo Internet Security (STILL NOT TESTED)
Another way to disable Bitlocker
Anti-Malware / Anti-Virus Scan If Possible to Run One
Bitlocker Repair Tool, will try this also
I have posted this as have not found much info online, usually find it and crack on but this time things are a little more tricky, my priority task I really need to do is remove the Bitlocker Encryption, but if the application will not run... what do I do
then?
Thanks for your time reading all, Sorry for any poor formatting or spelling.
Update 1: MMC.exe Error Code
Ok so now have the computer in safe mode, still same as before, no explorer.exe, no services etc... Just went into the Task Manager > Services (Tab) > Open Services (Option at bottom)
This is the error I get:
'The Instruction at 0x785a746c referenced memory at 0x000000a8. The memory could not be read.
Any Ideas on what this error is and why?
Update 2: CHKDSK Works with no Fix
Update 3: Hiren's 15.2 Boot CD - USB Boot still no luck booting around Bitlocker Encryption
Just to explain again, I already have unlocked the drive with correct bitlocker password or recovery key yet the drive remains locked not allowing windows refresh of files of complete install from the windows recovery menu as keeps saying drive is locked

Ok so attempt number two to write this update via bloody phone! (Just refreshed page whilst writing!)
Update 4:
Problem - cannot run from bootable devices (DVD/USB)
Cause - bitlocker fully encrypted drive stops this working
Repair - Boot up holding F9 to enter windows recovery Input Bitlocker recovery keys to unlock drives
Navigate to Command Prompt in advanced settings Execute following code:
Repair-bde c: d: -rp 000111-222333-444555-etc...
(Code found from https://technet.microsoft.com/en-us/library/ee523219%28v=ws.10%29.aspx)
Note for those using this: It is common while unlocking certain drives to get errors such as: Quote from http://www.benjaminathawes.com/2013/03/17/resolving-partial-encryption-problems-with-bitlocker/
"LOG INFO: 0x0000002aValid metadata at offset 8832512000 found at scan level
1.LOG INFO: 0x0000002b Successfully created repair context.
LOG ERROR: 0xc0000037 Failed to read sector at offset 9211592704.
(0×00000017) LOG ERROR: 0xc0000037 Failed to read sector at offset 9211593216.
(0×00000017) …followed by around 20 similar entries that differed only by the offset value"
Repair Status for Update 4: COMPLETED - However over wrote D drive data so now need to recover that
Problem 2 - windows services corrupted along with windows files
Cause - Unknown
Repair - wait until system is fully decrypted Once fully decrypted ensure boot from USB/DVD
Re-do fixes that would not work before if this has fixed boot issue Confirm fix / update post Hope anything I put here helps others also

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments

Keyboard Problem while running Swing App on LINUX

Hi All,
We have a Swing based Application running on Windows Platform. We need to run the Application on LINUX. The Application does not have any problem and runs without problems for a few minutes but after that the keyboard stops to respond inside the application. Keyboard runs fine outside the application but no key events are recognized inside the application. Mouse is working fine even after the keyboard stops responding.
Key Points:
�     The keyboard is a PS/2 keyboard.
�     Read Hat Fedora 5.0 is being used.
�     The problems occur on both KDE and GNONE.
�     The Java Version is jdk1.5.0_09
The application is data entry application using EJB at server side. The client UI has lot of JTables and Desktop Panes/ Internal Frames. User use ctrl+tab, ctrl+shift+tab, tab, shift+tab, and other hot keys to navigate between Components. Listeners on keyboard Focus Owner are also used. We are unable to diagnose the problem because of the undeterminable nature of the problem. The problem occurs at anytime and does not occur on any special key/ combinations press.
Thanks and Regards,
Nishant Saini
http://www.simplyjava.com

I've just installed the JDK 1.4 on my debian box. I
can compile and run a basic Hello World app using
System.println, but when I try to run a simple swing
app, I get an error like:
Exception in thread "main"
java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.... etc, etc.
It goes on with about 30 different classes. It
compiles fine, with no errors, but when it comes time
to run, that's what I get. This is what I have in my
.bash_profile as far as environment variables go:
export JAVA_HOME="/usr/local/j2sdk1.4.1_01"
export PATH="$JAVA_HOME/BIN:$PATH"
export
CLASSPATH="$JAVA_HOME/jre/lib/:$JAVA_HOME/lib:."The code works fine in Windows, so unless there's
something platform-specific, I don't think there's a
problem there. I've checked to make sure I'm not
running kaffe by accident and I'm definitely running
the right java and javac. I'm out of ideas. Any
suggestions would be greatly appreciated.
-dudley
I may just be crazy, but your PATH looks a little screwy to me. I was under the impression that the standard java installation has its executables in the 'bin' directory, not the 'BIN' directory. Unless Debian has fallen to the evil empire, then I'm fairly sure file names are case-sensitive. I don't know if that will fix your problem though. Do you compile from the command line, or do you use an IDE???

Fatal error while running sysprep on Windows 7

Ok, so I spent 2 weeks building this Windows 7 image, which now seems to be doing everything almost exactly as I want it. I have my unattend.xml file that I've built for past images that I copied onto this machine, and I ran sysprep with the /generalize
and /oobe flags. I get the above error once it gets into the generalize phase.
The log has the following interesting lines:
WindowsSideShow: Failed to get task folder (0x80070002)
LaunchDll:Failure occurred while executing 'C:\Windows\System32\AuxiliaryDisplayClassInstaller.dll,WindowsSideShow_Sysprep_Generalize', returned error code 31
So, I apparently unwittingly installed some Microsoft network-aware application that either doesn't support or is thoroughly confused by the Sysprep_Generalize command. Fortunately, I have enough experience with Windows to know you make a full disk
image before running a command that can so easily ruin all your hard work. Even though I only waste 20 minutes each time I have to restore an image, it's still frustrating dealing with such an obscure error. Asking The Google only shows obscure
recommendations about rearms (not the issue here) or disabling the Windows Media Player Network sharing service (or something similar....also not the issue here). I could just remove the above mentioned DLL from the generalize steps in the registry,
but I'd like to solve the root problem so my image isn't hiding a sleeper bug.

Hi,
If this is not an issue with rearm, please delete keys under this path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize\
And then run sysprep again to check how it works.
Alex Zhao
TechNet Community Support

Problem to run executable in windows 7 64.

Similar Messages

Maybe you are looking for