Problem using auto-complete SQL Developer

Hi everyone ...
I'm having a problem using the SQL Developer 3.2.20.09 87 ... when I try to use auto-complete in a 'SELECT' clause at a specific table (EX: clients.cod_client), if I have more tables in my 'FROM' clause, the program shows all columns from all tables. Even if I have specified the table I want to show the columns (like the exemple: clients.<columns>) ...
I've tryed to change the properties at preferences->insight ... but there's no option to change it there.
So, if anyone have faced this problem and solved, please help me ;)

Hi,
There is a specific forum for this kind of question which are not related to PL/SQL: {forum:id=260}
Please mark this question as answered and post your question there.
Regards.
Al

Similar Messages

Best practice when using auto complete in view layer

Hello
I have a question regarding best way to store/cash data when using auto complete function in view layer.
I know that there will be a lot of visitors that will use this function and I dont want to kill the application server so I need some advice.
Its about 6000 words that should be searchable .... my first thought was to create a Singleton-bean that stores current items and that I will iterate over but its a lot of "waste" doing that way.
I would be very glad if anyone could advice me how to do this best way if there is any de-facto standard to use when using auto completion in "view layer"
Thanks!
Best Regards/D_S

I dont know what your design is, but here are some ideas:
To me, autocomplete means you have some user specific data that the user entered prevously such as their home address, and some generic data that is not specific to any particular user. I would store all that in a database. For the user specific data I would store their userID along with the data in the database. Then, when populating a JSP page, I would call up just the data specific to that user and the generic data from the database. I would store it as an array of some type in javascript client--side. When the user clicks the autopopulate button, I would have that button call a javascript fuction that reteives the data from the javascript array and populate the various textfields. All this is done client-side so the form does not have to be re-drawn. I question why you have 6000 items. Normally, autopopulate has at most only a few dozens of items. If you still need 6000 items, I suggest adding a textfield to the form to filter what the data he needs down to a manageable amount. Example: rather than get all names from a telephone book, put a textfield on the form that allowfs an end user to enter a letter a to z such as 'b', then only fetch last names from the phone book that begins with 'b'.

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

Tutorial Announcement :: How To Use Auto Complete Text Form Control ::

Hello Everyone...
Here in this tutorial we gonna to learn a new and amazing feature of (ADDT), we will learn how to use Adobe developer toolbox (ADDT) form controls.
Form controls help you to add a fantastic features to your forms, that helps you to expand the form abilities and functionality...
The Auto complete Text Field is an enhanced text field that dynamically completes what you type with matched values from a table. You can also select the values from a list.
You can use the Auto complete Text Field in user registration forms, such as allowing users to select their country or city easier, Also in other forms that needs the user to pick one of many choices without any difficulties.
Requirements
To complete this tutorial you will need to install the following software and files:
Adobe Dreamweaver Cs3
Adobe Developer Toolbox (ADDT)
Don't forget: to try out the Demo type the first three letters :A - B - C
:: Go To Tutorials ::
:: Go To Tutorials ::
Best Regards
Waleed Barakat
Developer-Online Creator and programmer
http://www.developer-online.com

Heya Waleed,
I use spry to create an autocomplete form that works great across browsers that have javascript enabled. You can store info in a database and parse the info to xml for a dynamic approach. Take a look at the filter examples in spry.
http://labs.adobe.com/technologies/spry/samples/data_region/NonDestructiveFilterSample.htm l
http://labs.adobe.com/technologies/spry/samples/data_region/ZuggestSample.html

Using Dimensions with SQL Developer 3.1

After much effort I have been able to install the Dimensions plug-in to SQL Developer. I had to take a round about way due to proxy issues and manually installed it. Manually copied the zip file and extracted under jdev/extensions. But now I am having problems with understanding the navigation of using the Dimensions plug-in. I tried to read the help from the menu but it seems to be geared towards JDeveloper and I could not get much out of it.
I was assuming that the menu items under Versioning would be enabled once I am connected to Dimensions. For e.g. I was expecting the Check Out and Check In items to be enabled in the menu. But they are greyed out. I am definitely connected to our dimensions application because I am able to see the repository and its contents in Versioning Navigator.
I am wondering if it is a problem with the way I installed the dimensions plug-in OR just some navigation understanding that I am missing? Any help appreciated.

Can you search the forum for similar issues? Sqldeveloper used to ship with conflicting batik JARs whch caused models not to print (lthough IIRC the option was not grayed out, it simply wouldn't work)

Problem when accessing through SQL Developer...

Folks,
Need a assistance here, Today I faced strange problem from one of my application users...
He is trying to list the tables of another schema from SQL Devleopor But it took lonnnng time to expand the table lists. Below is the acutaal scenario.
In SQL Developer he is loging to the database using xxx user and able to connect as qucik as usual, once he connected to the database he needs to list out the tables in yyy user, But when clicking tables under yyy user it took hell lot of time to expand it. But as a DBA I could access everything as quick as usual.
1) He logged in to the DB using xxx -- Able to connect quickly
2) He is expanding other users and selecting the user yyy
3) From there he is trying expand Tables section -- > This is taking very long time some time hungs.... But through DBA account everything can be accessible easily and quickly.
Looks a very strange scenario and I dont even know how to analyse it, I appreciate your valuable solution

You'll probably get better assistance in the dedicated forum {forum:id=260}.

Using CVS in SQL Developer for Data Modeler changes.

Hi,
I am fairly new to SQL Developer Data Modeler and associated version control mechanisms.
I am prototyping the storage of database designs and version control for the same, using the Data Modeler within SQL Developer. I have SQL Developer version 3.1.07.42 and I have also installed the CVS extension.
I can connect to our CVS server through sspi protocol and external CVS executable and am able to check out modules.
Below is the scenario where I am facing some issue:
I open the design from the checked out module and make changes and save it. In the File navigator, I look for the files that have been modified or added newly.
This behaves rather inconsistently in the sense that even after clicking on refresh button, sometimes it does not get refreshed. Next I try to look for the changes in Pending Changes(CVS) window. According to the other posts, I am supposed to look at the View - Data Modeler - Pending Changes window for data modeler changes but that shows up empty always( I am not sure if it is only tied to Subversion). But I do see the modified files/ files to be added to CVS under Versioning - CVS - Pending Changes window. The issue is that when I click on the refresh button in the window, all the files just vanish and all the counts show 0. Strangely if I go to Tools - Preferences - Versioning - CVS and just click OK, the pending changes window gets populated again( the counts are inconsistent at times).
I believe this issue is fixed and should work correctly in 3.1.07.42 but it does not seem to be case.
Also, I m not sure if I can use this CVS functionality available in SQL Dev for data modeler or should I be using an external client such as Wincvs for check in/ check out.
Please help.
Thanks

Hi Joop,
I think you will find that in Data Modeler's Physical Model tree the same icons are used for temporary Tables and Materialized Views as in SQL Developer.
David

Using TOAD and SQL Developer to compare db objects in schemas in databases

Hi All,
My primary objective was to compare objects in schemas in two different databases and find out the differences,
Execute DDL's in the database where objects are missing and syn schemas in two different databases.
So I need to compare schemas in databases. Which tool would be helpful and will be user friendly to make a comparison of database objects existing in schemas in two different databases.
I'd like to see if I can get a list of pro and cons between Toad and SQL Developer for comparing schemas pros and cons.
Could you please also help me on navigation in SQL Developer to compare schemas.
Connect to Source
Connect to Target
Compare schemas with different object types
Find out differences
Generate DDL's for the missing objects or for the objects in difference report
Run them in missing instace(Source/Target)
Make sure both are in sync.
Thanks All

Hi,
Most dba type tools have this kind of functionality - personally i use plsqldeveloper but this is very similar to most other tools on the market. SQL Developer seems to rely on you needing the change management pack licence which you likely dont have and would be quite a large cost to roll out.
I'd compare plsqldeveloper/toad/sqlnavigator etc and maybe the tools from redgate which look pretty good though i haven't used them.
Regards,
Harry

Problem logging in pl/sql developer

Hi All,
I'm a newbie to pl/sql so pls bear wit me if this seems silly to u. I've just installed the Oracle 10G XE and pl/sql developer 8. I could connect to the database in SQL command line, but when i try to login thru pl/sql developer, i cudnt. Should i make any changes?
Pls help!
Cheers

Welcome to the forum.
Your problem is not SQL or PL/SQL related.
Check your settings in the Preferences menu and adjust if needed. ( go to Tools --> Preferences )
and/or go to http://www.allroundautomations.com/plsqldev.html ( Support --> Forum ) and ask over there.

Permitted use of Oracle SQL Developer.

Hello.
It looks like different versions of SQL Developer have different licenses... According to one (for 1.5.4) "We grant you a nonexclusive, nontransferable limited license to use the programs solely for your business operations and any third party training as part of such business operations.". According to other (for 2.1) "You may not: - use the programs to provide third party training;".
Is it true that I can use only older version of SQL Developer for students' training?

Hello.
It looks like different versions of SQL Developer have different licenses... According to one (for 1.5.4) "We grant you a nonexclusive, nontransferable limited license to use the programs solely for your business operations and any third party training as part of such business operations.". According to other (for 2.1) "You may not: - use the programs to provide third party training;".
Is it true that I can use only older version of SQL Developer for students' training?

Problem on auto completion

on click of ctrl+space auto complete is not happening instead im getting the below error can any one please suggest a solution for this.
problem during content asisst
Regards
Govardan Raj S

Hi Govardan,
check out this link.
http://scn.sap.com/thread/1284481

Problems with printing from SQL Developer Data Modeler 2.0

Hi,
I am not able to print my Relational Model (SubView) from Data Modeler 2.0 Build 584. Only an empty page comes out. If I don't reduce the Print Scale (usually to 10-30%) I get something but then it is lots of pages. I have tried A4 and A3 format. Printing to JPEG or PDF seems to be ok.
I have relational data model with 25 tables in my SubView.
Is there any restriction on Print Scale or number of objects in the diagram?
Do I have to install SQL Developer as well? I have just Data Modeler insalled.
Regards,
Alex

Hi Alex,
There is newer version of Data Modeler (3.0 EA2) and it is free
You can download it from here
http://www.oracle.com/technetwork/developer-tools/datamodeler/ea2-downloads-185792.html
Regards
Edited by: Dimitar Slavov on Dec 9, 2010 2:15 AM

Constraints are missing when using unload with SQL Developer 3.0.03 .

The following message appears in the output file and no constraints are included.
Unable to render CONSTRAINT DDL for object *** with DBMS_METADATA attempting internal generator.

First of all - there is no SQL Tab available (unlike earlier versions of SQL Developer)
Here are the results of the requested selects:
1 - select * from all_objects where object_name = 'LOC_CONTACTS' and owner ='PRO';
PRO LOC_CONTACTS 31282 31282 TABLE 03-MAR-11 03-MAR-11 2011-03-03:17:31:39 VALID N Y N
2 - select * from all_constraints where table_name = 'LOC_CONTACTS' and owner = 'PRO';
(Same result as select * from all_constraints where table_name = 'LOC_CONTACTS' )
PRO     SYS_C003305     C     LOC_CONTACTS     "LOC_NUM" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003306     C     LOC_CONTACTS     "LITEM_NUM" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003307     C     LOC_CONTACTS     "TITLE" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003308     C     LOC_CONTACTS     "FIRST_NAME" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003309     C     LOC_CONTACTS     "SURNAME" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003310     C     LOC_CONTACTS     "POSITION" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003311     C     LOC_CONTACTS     "USER_NAME" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003312     C     LOC_CONTACTS     "LANGUAGE" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003313     C     LOC_CONTACTS     "ACTIVE" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
PRO     SYS_C003314     C     LOC_CONTACTS     "POST_TO_SUN" IS NOT NULL                    ENABLED     NOT DEFERRABLE     IMMEDIATE     VALIDATED     GENERATED NAME               03-MAR-11
Edited by: user470293 on 22-Mar-2011 02:04
Edited by: user470293 on 22-Mar-2011 02:04

Problems with Auto Complete in v31.4.0

Since upgrading to version 31.4.0, the auto-complete for the address field has not worked properly. The delay between address selection is much longer than in previous versions. In past versions I could usually type the first two characters and then immediately tab to the Subject line. Now I have to wait a beat or two after typing the first two character, then tab takes me to the next address field rather than the subject line. This has resulted in misaddressed messages and missing subject lines.

hi Russ,
i was trying to export a sequence of frames into compressor.
since then i applied an update to FCP 10.0 and it is now working.
thanks.
Wasim.

Problem using oai SDK to develop a browser class for iStudio

I was trying to develop a new browser class fo iStudio using the example Browser SDK Tutorial codes. The package name is defined as:
"oracle.oai.tools.iStudio.browsersdk.USIBrowser"
In iStudio's "browsers.init" I appended this line:
"FileBrowser;oracle.oai.tools.iStudio.browsersdk.USIBrowser;"
In "iStudio.bat"'s CLASSPATH I appended this entry:
"C:\oracle\OraIC\oai\tools\USIBrowser\USIBrowser.class;"
Why the hell iStudio cannot find the new class:
"menu: FileBrowser
class: oracle.oai.tools.iStudio.browsersdk.USIBrowser
java.lang.ClassNotFoundException: oracle.oai.tools.iStudio.browsersdk.USIBrowser
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Class Not Found: oracle.oai.tools.iStudio.browsersdk.USIBrowser"
Can somebody point me to the problem? Any help is appreciated.
John

Hi:Thanks for your response.The following code works fine in a standard VB.Net windows Application,It is just a send and receive instruction to a power meter over the GPIB bus.This code is behind a Button,and a label displays the result.I have a problem when I try to duplicate this simple code on an ASP.Net page using Server controls.When you click the button the code is supposed to execute on the server side and not the client side(browser).The code fails when it gets to the viOpenDefaultRM line,I get an error message as follows System.DllNotFoundException:Unable to Load Dll(VISA32.DLL).I have added a reference to the visa library from within the project.
'''''This is the code I am using'''''
Dim lsnbuf As String = Space(100)
Dim wq As Long
Dim drm As Long
Dim ret As Long
Dim vi As Long
Dim tlkbuf As String
Dim FoundCRLF As String
Dim CleanString As String
Dim rcnt As Long
wq = viOpenDefaultRM(drm) 'Open Vi session
wq = viOpen(drm, "GPIB0::2::INSTR", VI_NULL, 5000, vi)
tlkbuf = "*IDN?"
ret = viWrite(vi, tlkbuf, Len(tlkbuf), rcnt)
ret = viRead(vi, lsnbuf, 100, rcnt)
FoundCRLF = InStr(lsnbuf, vbCrLf)
If FoundCRLF > 0 Then
CleanString = Mid(lsnbuf, 1, FoundCRLF - 1)
End If
Label1.Text = CleanString 'display IDN String

Problem using auto-complete SQL Developer

Similar Messages

Maybe you are looking for