Problems with Auto Complete in v31.4.0

Since upgrading to version 31.4.0, the auto-complete for the address field has not worked properly. The delay between address selection is much longer than in previous versions. In past versions I could usually type the first two characters and then immediately tab to the Subject line. Now I have to wait a beat or two after typing the first two character, then tab takes me to the next address field rather than the subject line. This has resulted in misaddressed messages and missing subject lines.

hi Russ,
i was trying to export a sequence of frames into compressor.
since then i applied an update to FCP 10.0 and it is now working.
thanks.
Wasim.

Similar Messages

Anyone have problems with auto complete on iTouch

It is getting really annoying when I type a word correctly and the auto correct selects something else and when I post my word is mispelled thanks to Apple. Any way of getting around this or turning it off?

All you an do is tap the x by the "wrong" spelling and it should learn after a while.

Text-input component with auto-complete functionality for mobile

Hey guys,
I wonder if there is a text-input component with auto-complete functionality optimized for mobile development with AIR like the one that Android provides natively as you can see here http://developer.android.com/reference/android/widget/AutoCompleteTextView.html and here http://developer.android.com/resources/tutorials/views/hello-autocomplete.html.
At least I didn't find it in the latest SDK and I think such a component is pretty standard nowadays. Or did I simply overlook it?
Thank you guys for any advice.
Regards,
Thilo

Hi relaxtraja,
thanks for your reply!
I knew that there are a lot of auto-complete scripts on the web. What I was hoping was, that Adobe provides an officially supported auto-complete component optimized for mobile as part of the SDK (like in the Android SDK as I pointed out), but that doesn't seem to be the case. It's sad, because it's an essential part of modern UIs in mobile applications.
I've already created an auto-complete component by myself based on Spark components and I will end up using it. But I will have to optimize it for mobile applications beforehands. I just think something this essential should be provided by the SDK.
However, thanks for posting!
Regards,
Thilo

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

CND problem with code-completion

Hi,
First of all I don't really know where to put this post about C++ Pack in NetBeans. I've read one post in which someone suggests that this section will be pretty close...
Maybe someone here would be so kind and try to help me...
I'm using Ubuntu 7.04 and I have a problem with code completion in NetBeans 5.5.1 CND and I'm a little bit frustrated right now....
I installed Netbeans, then CND, Created new C++ Project. Added new source file, with #include <GL/glut.h> directive.
Whole code was compiled without errors, and that's fine.
There were some problems with linking but I've added "glut", "GL", "GLU" string to linker parameters in Project Properties.
The main problem is the code assistant. When I'm hitting "glut" and press ctrl+space it shows functions from glut library but when I type "gl" (to type "glColor3ub...") and try to show the code completion pop-up it shows "No suggestions". The same thing is with GLU library.
I've installed GL, GLU, glut libraries (they all sit calmly in /usr/include/GL).
I've added the /usr/include and /usr/include/GL to C++ section.
I think that the Netbeans is able to find those *.h files because, as I said before, the glut (and the glX) functions are shown properly but there is no sign of "gl" and "glu" FUNCTIONS in code completion (the #define values specified in gl.h and glu.h are on the list, but the functions aren't)...
I don't have idea why glut and glX are working fine, and gl and glu aren't... If anyone have similar problem, know where to look for an answer or have some suggestions I would be much obliged...
I've seen Eclipse CDT, Anjuta, kDevelop, Code::Blocks, VIM + icomplete... after checking them all there is only one decision - I want to use NetBeans CND. It's user-friendly, fast and I just like it. That's why I would really like to know why the code-completion isn't working in 100%...

Vladimir,
The glColor3ub function declaration is in gl.h file (which along with glu.h is included in glut.h).
Thanks Maxim,
In the matter of fact since yesterday I've been looking for the reason why the GL and GLU aren't indexed properly by the Netbeans CC and I've found something.
The GLU library was indexed after deleting
#include <GL/gl.h>directive. So it means that the gl.h library is messing up.
I've checked whole file (gl.h) and noticed that the only part which is in conflict with NetBeans is this one:
#elif defined(__GNUC__) && (__GNUC__ * 100 + __GNUC_MINOR__) >= 303
# define GLAPI __attribute__((visibility("default")))
# define GLAPIENTRYI'm using GCC 4.1 so the expression value is 401, so the GLAPI define looks like the line above.
gl.h is indexed properly by NetBeans when it is representing "extern", so it should look like
# define GLAPI externIt is working fine if you delete this part of gl.h or for example (which I've done) add predefined macro (or change the existing one)
__GNUC_MINOR__=-200I know that it isn't very clean solution... I'm not happy with cheating NetBeans about the version of installed GCC but unfortunately I am not a specialist in GNU C so maybe someone would find more elegant solution.
As far as I know the __attribute__ feature makes the GCC more verbose (warnings, errors) but I don't know how much functionality am I loosing in fact...
Edit: Why the code tags aren't working? :/
Message was edited by:
Makula

Mail has problem with auto address.

My mail recently has had a problem with auto addressing. Sometimes it fills in the address, at other times it will not. I have checked mail preferences often...making sure auto-address is on. I CAN use the address book to click on an address when auto addressing doesn't work. Mail is also quirky about quitting and sometimes preferences have to be re-edited to send. Basically, it is behaving badly. What to do? Thanks ACE

My mail recently has had a problem with auto
addressing. Sometimes it fills in the address, at
other times it will not. I have checked mail
preferences often...making sure auto-address is on. I
CAN use the address book to click on an address when
auto addressing doesn't work. Mail is also quirky
about quitting and sometimes preferences have to be
re-edited to send. Basically, it is behaving badly.
What to do? Thanks ACE
Later...12/03. Autofill not working with mail or safari. Autofill icon, when touched says something like...autofill has no infomation. this is weird, since it had been working nicely for 2.5 years. I've tried everything I could think of. Need a pro's help...MNICE

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Problem with auto install of Photoshop CS4

Hello,
I'v a problem with the installation of Adobe Photoshop CS4 under Windows 7. It's working
with Windows XP. I've a Exit code: 7 (Unable to complete the silent workflow). I use the
command Setup.exe --mode=silent or Setup.exe --mode=silent --skipProcessCheck=1 or the same commande
with de response file but always the same error code.
Can you help me to resolve my problem ?
Best regards

You should probably go to the PS Windows forum with this question...

Appropriate component with auto complete and list of values

Hello,
I am using Jdev 11.1.1.6.0 with ADF BC and ADF Faces as technology stack.
I have a use-case and right now struggling to find the appropriate component/implementation for same. The requirement is:
1. User should be able to type and tab out to auto complete with perfect match.
2. Not all users are expert so they should be able search and select the items from list
3. Minimum key press should be there. E.g. auto complete should require only one tab press to complete and go to next field
inputComboboxListOfValues fits most of above except #3. One tab simply selects the item from list and second tab is needed to move out to next attribute. Is there a way to force one tab to auto-complete and move out to next attribute?
Tried simple inputBox with autoSuggest behavior but it lacks in opening of search and select feature that LOV component provides. Another drawback is that you need to wait for auto suggest list to appear and select before moving out to next attribute.
This is needed on a very highly frequent used screen, so no speed and key press compromise is expected. Most users are expert and they know the code, so just type and tab out is expected but at the same time if typo happens and code does not exist in valid list then pop-up should appear to search and select.
Is there a way to achieve this in ADF application (this is very well implemented in Oracle Forms application)?
Any help is highly appreciated.
Thanks,
Jai

Hi Frank,
I understand the single matching value and expecting move out in single tab for perfect match only. inputComboboxListOfValues selects the entry in one tab [even for single matching value] and user has to press another tab to go to next attribute.
Are you suggesting that it actually moves out to next field in single tab for "single matching value"?
Thanks,
Jai

Problems with auto-cap of I on ios6?

I upgraded my 4s to iOS6 and not my auto capitalization of "I" is not working. Anyone else have this problem or know how to fix it?

Yeah I tried making a shortcut to make i into I, but it has to be two characters. I guess I'll just go into the store tomorrow and see if anyone else has had problems with it with iOS6. I haven't heard that anyone has had any wonderful experiences with it yet

Any time any of my usernames come up in the dropdown menu with auto complete, the font is to small and i can't read it.. is there anyway to make it bigger???

the auto fill feature that firefox has, when i go to type in a username that's already been entered in, i cant read what i've previously put in at previous website visits. The drop down menu that shows what has previously been entered is way to small and i can't read what it says. even with the page zoomed. how can i make it bigger?

Hello Ashley.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
On the other hand, you may have Firefox configured to display fonts like that. Check Tools > Options > Content > Fonts & Colors and see that the font size is not too small. In my experience, sizes bellow 16 will be way to small to read.

Problem using auto-complete SQL Developer

Hi everyone ...
I'm having a problem using the SQL Developer 3.2.20.09 87 ... when I try to use auto-complete in a 'SELECT' clause at a specific table (EX: clients.cod_client), if I have more tables in my 'FROM' clause, the program shows all columns from all tables. Even if I have specified the table I want to show the columns (like the exemple: clients.<columns>) ...
I've tryed to change the properties at preferences->insight ... but there's no option to change it there.
So, if anyone have faced this problem and solved, please help me ;)

Hi,
There is a specific forum for this kind of question which are not related to PL/SQL: {forum:id=260}
Please mark this question as answered and post your question there.
Regards.
Al

Problems with auto-enroll with the certificate expiration

Hello,
we have routers that work with certificates. We have problems with the auto-enroll when the certificates go to expire.
?Can somebody help?
I can send mor debug o configurations.
We attach a debug.
Very thanks

Hello,
I attach the debug.
Very thanks

Problem on auto completion

on click of ctrl+space auto complete is not happening instead im getting the below error can any one please suggest a solution for this.
problem during content asisst
Regards
Govardan Raj S

Hi Govardan,
check out this link.
http://scn.sap.com/thread/1284481

Experience with "Auto-Complete and Go-Less Prompts"

Hi all,
does anyone have experiences with editing instanceconfig.xml for auto-completing prompts?
Is it buggy? Or are there any kinds of risks?
reference: http://www.peakindicators.com/media_pi/Knowledge/oracle%20bi%2011g%20-%20applying%2011.1.1.6.2%20bp1%20-%20windows.pdf
Please have a look at page 10, it describes how to edit the xml
Thanks

Hi Frank,
I understand the single matching value and expecting move out in single tab for perfect match only. inputComboboxListOfValues selects the entry in one tab [even for single matching value] and user has to press another tab to go to next attribute.
Are you suggesting that it actually moves out to next field in single tab for "single matching value"?
Thanks,
Jai

Problems with Auto Complete in v31.4.0

Similar Messages

Maybe you are looking for