Problem when updating Management Engine (ME) firmware - photo attached

Hello All:
I have encountered a perplexing problem when attempting to update the firmware in the Intel Management Engine. The firmware update is posted on the W520 driver page (it is package 83rf32ww). The problem is the error message shown in the photo below.
The update process starts when the MEUpdate.CMD file is selected within the DOS window, but after a few seconds, the error message at the bottom of the picture appears.
Any suggestions would be appreciated.
Thanks,
Michael
Solved!
Go to Solution.

Yes, except you're running it from C:\Windows\system32 rather than the expected C:\DRIVERS\WIN\ME.
Basically, you have to navigate to the folder FIRST, then run the file.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD

I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list. I have t

I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list. I have tried relaunching programs and nothing appears. Seemed to start happening a while back after one of my system upgrades.

After a a lengthy conversation with Apple Tech. ($20), my problem seems to be solves. The Iphoto problem solved by trashing the plist file. The Itunes was more involved. We had to create a new Itunes folder and import the files into the new folder; and then import the playlists.

I have a problem when updating applications on iOS 7.0.2

I have a problem when updating apps on iOS 7.0.2 to go to the appstore I get the update but only tells me open, not update, I have to uninstall and reinstall te app and gives me the option to update. Sorry my bad english

I am in the process of installing 9i on SUSE Linux 7.2. The only Linux that is certified to run 9i. The machine is is a fresh install of SUSE. I am running into the same problem. I ran through the first make problem by going to a shell and invoking a make -f oemagent.mk. Built the library just fine. Got errors when trying to run make -f ins_rdbms.mk. Not sure why the installer or the command line is having problems.
Not sure if I can just hit Ignore and go on????
Any help would be appreciated. You would think 9i would spread like butter on their "Certified" platform.

I have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!

i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???

Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian

Hlep.. Problem when updating aspx templates

Hi there, I-m having a huge problem when updating pages from
a .asp template, it replaces my 1 line of code
with <%@ Page Language="VB" ContentType="text/html"
ResponseEncoding="iso-8859-1" %> and errases the resto of the
attributes i have on each page, making it unfunctionable.
Does anyne know why the template when updating does that?
thanks for your help

Hi Suman,
The changes are getting lost when i logout and login back to SAP.
In Current session i am able to see the changes. But changes are lost as soon as i end up my session,
but this is happening only in case of template box width. All other changes are retained between my various SAP sessions.
So wanted to know if any other value is over-writing the template box width values.
Regards
Manpreet Singh

I have problem when update to belle the folder of ...

I have problem when update to belle the folder of games disappear?? c7
I need to solve ??? Plus

Do you mean that pink folder w/ the controller icon on it? I lost that too on my N8. Actually, lost all of the folders that came with Anna like Applications & Music. Wish I could get them back as now I can only make the generic yellow folder which isn't as aesthetically appeasing.
However, reading articles on Belle there was a picture of a Belle N8 with the games folder shortcut on the homescreen - so maybe it still exists & I just cannot find it.
Good luck & I'll let you know if I figure this out.

Validation problem when update a row in OAF

created a application using OAF. No problem to create a row, when tried to update the row, received the following error message:
oracle.jbo.RowValException: JBO-27012: Row validation method validation() failed for row with key oracle.jbo.Key
2) Steps to Reproduce
select a row from search result page for update, after change the value and apply it, received the following error message:
oracle.jbo.RowValException: JBO-27012: Row validation method validation() failed for row with key oracle.jbo.Key

yes. it is the EO based VO page. Create and Update used same VO and no problem to create the row, had problem when update the row.

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see spec

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Problem when Updating the Challan (J1INCHLN)

Dear Expert,
I am facing problem when i am updating Challan throught 'J1INCHLN'. I debuged the 'J1INCHLN' and got the problem that TDS line item in BSEG table and TDS line item in WITH_ITEM does not match.
Thank you in advance,
Denish Patel.

Hi,
This error also comes if you donot mention Business Place and Section code during the transaction. Please check whether
you have defined business place and section code and assigned to your company code and also entered them during
transaction.
Regards,
Sadashivan

[HELP] Problem when update 1 unicode form

hi all,
I got a problem when I update unicode form :(
so, I have already tested my web application (Struts-ibatis-velocity-tiles) on my PC (tomcat 5.5.12, mysql 4.1 - utf8 default, JDK 5.0), everything was okie. I could update 1 unicode form (the form which contains unicode characters - firstname, lastname). I use 1 filter for output and input, below is my web.xml:

<filter>
<filter-name>Set Character Encoding</filter-name>
<filter-class>filters.SetCharacterEncodingFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>UTF-8</param-value>
</init-param>
</filter>

<filter-mapping>
<filter-name>Set Character Encoding</filter-name>
<servlet-name>action</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>Set Character Encoding</filter-name>
<servlet-name>velocity</servlet-name>
</filter-mapping>
but ... when I deploy and run it on eatj.com, mysql4.1 - utf8, jdk 5.0, I couldn't update unicode form, my last name and first name fields couldn't be saved with unicode characters (utf-8) ...
what happened :( ... Is this problem of hosting or my web application ??? :(
help me :(
thanks in advance,
bowlkhin

You need to install the bc package. Apparently the script uses bc to calculate some integer values.
Brian

Problems when updating WLC from Version 4.1 to 4.2

Hi,
we have a Problem when upgrading a WLC 4400.
When booting the device with the 4.2 Software, there are errors in some lines like "Starting Virtual AP Services: Parse error at line 244:
not well-formed (invalid token)"
and the config gets deleted.
What could be the problem? Is there a possibility to save the config and view it in clear text?
Thanks a lot and regards.

I see a similar message while booting a WLC-4402-25 running 5.0.148.0:
Starting Management Services:
Parse error at line 3
not well-formed (invalid token)
Web Server: ok
Looking at line 3 of the XML config file reveals:
Unless line 3 refers to a line 3 of a subset of the XML config file, I'm guessing the WLC code generating the XML config file is out of sync with the WLC code interpreting the XML config file during boot, or vice versa.
In my case the config is retained on the WLC.
Trond.

Problems when updating to mountain lion?

I am currently at OSX 10.6.8. What kind of problems can I expect when updating to Mountain Lion?

If your Mac is capable of running Mountain Lion, has at least 4GB of RAM, and a decent amount of available free space, the update should go quite smoothly for the average user.

Problem when updating Management Engine (ME) firmware - photo attached

Similar Messages

Maybe you are looking for