Problem while configuring OSB External Resource in BPM Studio

Hi
I have just started using the BPM Studio 10.1.3. I want to invoke my Oracle Service Bus proxy services from one of the activities in the BPM Process flow.
I created an external resource of type Oracle Service Bus and while trying to catalogue the OSB Component I found that only my WSDL Web Service proxy services with http transport protocol are available to be catalogued. I couldnt find the proxy services of the type Messaging Service, Any SOAP Service, Any XML Service created on Oracle Service Bus.
Am I missing anything in the configuration or is it that BPM Studio does not support these protocols(jms,mq etc).
Also, in the Studio Reference there is a mention of Oracle BPM(native) transport that BPM supports for cataloguing OSB Components apart from http and https.
What is this protocol and how and where can i configure the same to help me catalogue the other OSB proxies?

Similar Messages

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

Error while Configuring AD external authentication plug in

Hi
While configuring Active directory external authentication plug I am getting following error
OID Active Directory Plug-in Configuration
Please make sure Database and OID are up and running.
Please enter Active Directory host name: clmad101.ad.company.com
Do you want to use SSL to connect to Active Directory? (y/n) n
Please enter Active Directory port number [389]: 389
Please enter DB connect string:SQLPLUS sys/manager1 @infradb.ad.company-.com @md61nthiims1.ad.company.com:1521
Please enter ODS password:
Please enter confirmed ODS password:
Please enter OID host name: md61nthiims1.ad.company.com
Please enter OID port number [389]: 389
Please enter orcladmin password:
Please enter confirmed orcladmin password:
Please enter the subscriber common user search base [orclcommonusersearchbase]:
CN=Users,dc=ad,dc=company,dc=com
Please enter the Plug-in Request Group DN:
Please enter the exception entry property [(!(objectclass=orcladuser))]: (|(!obj
ectclass=orcladuser))(cn=orcladmin))
Do you want to setup the backup Active Directory for failover? (y/n) n
Installing Plug-in Packages ...
Usage: SQLPLUS [ [<option>] [<logon>] [<start>] ]
where <option> ::= -H | -V | [ [-C <v>] [-L] [-M <o>] [-R <n>] [-S] ]
<logon> ::= <username>[<password>][@<connect_identifier>] | / | /NOLOG
<start> ::= @<URL>|<filename>[.<ext>] [<parameter> ...]
"-H" displays the SQL*Plus version banner and usage syntax
"-V" displays the SQL*Plus version banner
"-C" sets SQL*Plus compatibility version <v>
"-L" attempts log on just once
"-M <o>" uses HTML markup options <o>
"-R <n>" uses restricted mode <n>
"-S" uses silent mode
Usage: SQLPLUS [ [<option>] [<logon>] [<start>] ]
where <option> ::= -H | -V | [ [-C <v>] [-L] [-M <o>] [-R <n>] [-S] ]
<logon> ::= <username>[<password>][@<connect_identifier>] | / | /NOLOG
<start> ::= @<URL>|<filename>[.<ext>] [<parameter> ...]
"-H" displays the SQL*Plus version banner and usage syntax
"-V" displays the SQL*Plus version banner
"-C" sets SQL*Plus compatibility version <v>
"-L" attempts log on just once
"-M <o>" uses HTML markup options <o>
"-R <n>" uses restricted mode <n>
"-S" uses silent mode
Usage: SQLPLUS [ [<option>] [<logon>] [<start>] ]
where <option> ::= -H | -V | [ [-C <v>] [-L] [-M <o>] [-R <n>] [-S] ]
<logon> ::= <username>[<password>][@<connect_identifier>] | / | /NOLOG
<start> ::= @<URL>|<filename>[.<ext>] [<parameter> ...]
"-H" displays the SQL*Plus version banner and usage syntax
"-V" displays the SQL*Plus version banner
"-C" sets SQL*Plus compatibility version <v>
"-L" attempts log on just once
"-M <o>" uses HTML markup options <o>
"-R <n>" uses restricted mode <n>
"-S" uses silent mode
Registering Plug-ins ...
adding new entry cn=adwhencompare,cn=plugin,cn=subconfigsubentry
adding new entry cn=adwhenbind,cn=plugin,cn=subconfigsubentry
Done.
Is there anythign wrong in the DB connect string??
Thanks

Did you check the debug information from the external auth plugin.?
This is mentioned in metalink note https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=277382.1
here an excerpt:
D) Enabled plug in debugging at the database level. Reference documentation: Oracle Internet Directory Administrator's Guide 10g (9.0.4) Chapter 43 Integration with the Microsoft Windows Environment - Troubleshooting Integration with Microsoft Windows Under section "Debugging the Microsoft Active Directory External Authentication Plug-in"
...enable the plug-in debugging. To do this, enter:
> sqlplus ods/odspassword @$ORACLE_HOME/ldap/admin/oidspdon.pls
To check the plug-in debugging log, enter:
> sqlplus system/manager
SQL> select * from ods.plg_debug_log order by id;
(To delete the plug-in debugging log:
> sqlplus system/manager
SQL> truncate table ods.plg_debug_log
To disable the plug-in debugging:
> sqlplus ods/ods @$ORACLE_HOME/ldap/admin/oidspdof.pls
E) Dump the plug-in profile to make sure it is enabled and configured correctly:
> ldapsearch -h <OID host> -p <OID port> -D "cn=orcladmin" -w <orcladmin password> -b "cn=plugin,cn=subconfigsubentry" -L -s sub "(objectclass=*)" "*"
please take also a look into the DIPTESTER tool available in
http://www.oracle.com/technology/sample_code/products/oid/java_diptester.tar
regards
--Olaf

Issue while configuring XLIFF as resource bundle

We are using Jdeveloper 11.1.1.7.0 ver. We are configuring ADF Faces project for XLIFF by creating xliff file in resources folder and adding xliff file to project properties.
In design time we are able to see the configured values when we use expression builder however, we are getting following exception at runtime:
java.util.MissingResourceException: Can't find bundle for base name UIRes, locale en
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1521)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1260)

I am getting issue while configuring report in integrated mode! The issue and the solution to that is as mentioned here.
I tried to set the Report Server Service account to Use Another Account
but when i try to apply i get the issue as below.
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC
---> System.Runtime.InteropServices.COMException (0x800708AC): The group name could not be found. (Exception from HRESULT: 0x800708AC)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
Kindly help!
I have the same error after a change in domain policies and after reconfigure the password of the domain account user used for the Report Server Service Account.
I don't use a group!!!
Thank You for any help!
Alessio

Problem while connecting to external DB using DB link

Hi,
We've recently upgraded SAP(4.6C) Oracle DB to 10g version. SAP is talking to an external DB which is on a 8.x version.
The following is the native SQL statement being used to select data from the external DB -
EXEC SQL PERFORMING APPEND_ISSUE.
      SELECT STOCK_NO,
             QUANTITY,
             SOURCE_LOCATION1,
             SOURCE_LOCATION2,
             JOB_CODE,
             ACID_CODE,
             EMPLOYEE_NO,
             SOURCE,
             ROW_ID,
             CIS_ORDER_NO
       INTO :WA_ISSUES
       FROM [email protected]
ENDEXEC.
FORM append_issue.
*-- Begin HD002666
SHIFT     wa_issues-quantity         RIGHT DELETING TRAILING space.
TRANSLATE wa_issues-quantity         USING ' 0'.
SHIFT     wa_issues-source_location1 RIGHT DELETING TRAILING space.
TRANSLATE wa_issues-source_location1 USING ' 0'.
SHIFT     wa_issues-job_code         RIGHT DELETING TRAILING space.
TRANSLATE wa_issues-job_code         USING ' 0'.
SHIFT     wa_issues-acid_code        RIGHT DELETING TRAILING space.
TRANSLATE wa_issues-acid_code        USING ' 0'.
*-- End HD002666
APPEND wa_issues.
ENDFORM.
The DB link is running fine and we're able to connect to the external DB.
The 1st record from the extranl DB is read perfectly.
From the 2nd record, some of the numeric fields are reading a value '~'. We checked the external DB view SAP_TRUCK_INVENTORY_ISSUES_V and it has all non-null numeric values.
It's confusing that the 1st record has exactly the same values as the external DB, but from 2nd record onwards, it is reading some numeric values as '~'.
Is there any kind of internal conversion that is happening while reading data from SAP_TRUCK_INVENTORY_ISSUES_V into work area wa_issues.
Are there any problems faced with DB links b/w 2 Oracle DBs with version difference more than 1?
Any inputs on this would be helpful.
Regards
Deepthi.

Hi Rich,
Thank you for a quick reply,
Here is what I've done to connect to the remote ABAP system:
1. Configured this remote system in the SLD as a Technical System (SLD=> Technical Landscape).
2. Opened WebDynpro Content Administrator and created two JCO's for my application pointed to that remote ABAP system (defined in SLD). I was able to test them successfully reaching that remote system.
But when I run my application the same error occured.
What did I miss ?
Thanks & Regards,
Mike
Message was edited by: Mykhaylo Puzankev

Connection problem while connecting to LDAP resource via SSL

Hi,
I am facing problem in connecting LDAP via SSL. I got the self signed certificate from the LDAP team and while importing it to the JVM keystore using command "keytool -import -file PathTo/ds-cert.txt -keystore ./cacerts -storepass changeit -trustcacerts", I am getting error "keytool error: java.security.SignatureException: Signature does not match". Since I am not able to import the cert, I am facing problem in connetcing to LDAP via SSL. I have gone thru other posts and found some answers for it.. but not able to do it correctly. I am using SIM 7.1 and tomcat. In some posts, I have seen, in the resource config wizard, use "true" instead of 1 in the SSL field.. For SIM 7.1, does the value 1 work?. Please help me in importing the cert to my local JVM keystore.
Thanks.
Edited by: dj123 on Oct 15, 2008 1:50 PM

Make sure you are importing the certificate of the issuer (CA) that issued the LDAP certificate, not the LDAP cert itself.

Problem deploying project with External Resource Integration with jars

Hi,
Please help ur how we can deploy a project in Enterprise server if that is integrated to some application which needs weblogic.jar. If this jar is made vesionable then it shows a size problem. If that jar is added to Install Drivers (In the configuration screen of Server) it does not accept it and does not show error while deployment. But, the activity which is using that application is failed while execution.
Kindly provide me help over this.
Regards,
Sarang

What do you mean with a "size" problem? I've added weblogic.jar to the project (or any jar of that size) and it works fine. As rightcord mentioned, you can just put it in the classpath, but if you don't want to, you can still use it in your process.
You just have to deploy in another way, meaning you don't have to use the exported project but you can upload it the lcoation of where the server is running and publish from there - I believe this is option 1 in the Process Administrator.
Good luck!

Error while configuring WebLogic Server Resources for PIP.

Hi ,
As per the documentation I am able to build all PIP cartridges.
But while creating resources on weblogic I'm getting below error in build file.I'm following same instuction as per document.
Unknown argument: -Daia.jdev.lib.dir= setupJPSPolicy
Buildfile: E:\osm-workspace\OracleCgbuOsmAIAInstallation\OSM.AIAInstallation.xml
BUILD SUCCESSFUL
Total time: 2 seconds
2.
. Unknown argument: -Daia.jdev.lib.dir= setupPIPUsers
Buildfile: E:\osm-workspace\OracleCgbuOsmAIAInstallation\OSM.AIAInstallation.xml
BUILD SUCCESSFUL
Total time: 781 milliseconds
Is I’m missing some configuration in eclipse?
I'm using below version.
1. OSM-7.0.3
2. Design studio-7.2.0.0.0
Regards,
UJ

Hi,
Issue is resolved.
Value for property "aia.jdev.lib.dir" was missing in my build.xml.
Regards,
UJ

Problem While configuring Integrated Scenario

Hi,
While using Integrated Configuration in PI71, where our scenario establishes communication with a File(nfs) to File(nfs) adapter.
While testing in Integration Directory via Test Configuration, the scenario produces following error:
Problem occurred in receiver agreement for sender - BS1 to receiver -BS2,
namespace.OutboundInterfacename:: No standard agreement found for , BS1, , BS2,
namespacename, outboundinterfacename
where BS1, BS2 are sending and receiving Buisness systems respectively,
namespace - the namespace where both inbound and outbound service interfaces are configured.
Scenrio do not utilizes operation mapping.
I have gone though this thread Integrated configuration (PI 7.1) throws error when do 'Test Configuration' in sdn which states a similar problem but its still unsolved.
Moreover the scenario produces a required output file when it is tested by placing a test file in source destination.
Let me know if you have come across such situation and can provide the proper rationale for it.
Thanks for having a look.
Regards,
Nipun

@Abhishek Salvi,
Thanks that's very helpful information, Howsoever as I have mention, the dry test {where keeping the file in source destination and getting it generated at target destination} gives positive outcome, but while testing in RWB, the error "no receiver agreement could be found" still persist.
What's wrong while posting file to Adapter Engine from RWB, Is it incorrect to test this way?
@Abhishek Paul, When you say End to End do you refer with the same dry test way as what Salvi has also confirmed as the only way to test AAE scenarios, or you are about End to End monitoring tab of RWB?
Regards,
Nipun Shedhani

Problem while configuring webutil on oracle application server 10g(9.0.4)

hi,
I have configured webutil with oracle application server 10g(9.0.4).JInitiator 1.3.1.17 is installed.
I did everything according to webutil manual.Then i developed a form using developer suit 10g (9.0.4).
and successfully compiled and attached webutil library.then i subclass
webutil object group from webutil.olb into my form,that is also
subclassed successfully.Form has also been compiled and saved
successfully.
also configured my formsweb.cfg,forms90.conf,default.env according to webutil documentation.
{color:#993366}Now when i run this form from client, it does not show form in the
browser and shows a message on the client browser console as follows{color}.
{color:#0000ff}*Applet oracle.forms.webutil.common.RegisterWebUtil*
{color} {color:#993366}After this message,It does nothing and if i refresh browser,it shows following message in the browser' Console.{color}
{color:#0000ff}*Applet oracle.forms.engine.Main notinited.*{color}
Note:In the browser ,loading java applet is also visible.
how should i resolve this problem?
any suggestion?
Its urgent.
Regards,
abbasyazdani

Refer this metalink note,
566628.1 How To Install Webutil on 10g Oracle AS
[email protected]

Problem while configuring email system in service desk message

Hi all,
I have configured my soution manager service desk for sending emails to the key user when the message status changes from New to In process.Now i want that a mail should go to the message processor when the message is assigned to him.For that i will have to define a new action but the issue is which smart form do i need to assign to that action.
Regards
Praveen

Hi Praveen
I am also doing Service Desk config. Can u please tell me how u configured External system. I was able to send messages internally. but from Other systems in landscape i am not able to. I f u have any document from end to end please send me.
Points will be awarded for the solution.
Rajesh

[b]Listener problem while configuring host string through NET config[/b]

Hi,
I am unable to create host string through Net config. While testing with userid/password, the test does not succeed.
The host string configured is known as PROCESS.
Net config error message while testing the connection is as follows:
"Connecting...ORA-12541: TNS:no listener
The test did not succeed.
Some of the information you provided may be incorrect.
Press back to review the information provided for net service
name, or Change Login to change username."
Upon checking the status of listener from command prompt it gives following status:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Produc
tion
Start Date 08-JAN-2003 16:25:08
Uptime 0 days 16 hr. 9 min. 33 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File C:\orant\network\admin\listener.ora
Listener Log File C:\orant\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Long postings are being truncated to ~1 kB at this time.

Did you check that the DB is up ? If not, then check it and, eventually, start it up.
If yes, then open a DOS window, set your ORACLE_SID, connect to Sqlplus as sysdba and type :
SQL> show parameter service
what is the result ?

Problem while configuring the Apache Web Server as the Intermediary Server

Hello,
I want to use Apache 2.0 web-server as a proxy for my SAP EP so that I could access http://portal_server:50000/irj through this Apache external web-server.
I checked this sap help link as a reference.
http://help.sap.com/saphelp_nw04/helpdata/en/18/5cea2296190e4cb7faf9468ad793ea/frameset.htm
But still not clear what exact configuration I need to do in the httpd.conf file. I searched the posted forums on this topic but couldnt get exact steps.
It would be grateful if anyone can guide me on this configuration (redirecting url etc).
Thanks in advance.
-Mandar

STEPS OF SECURE APACHE-SSL
1.Install apache version like apache_x_y_z_win32.exe also select the right combination of mod_ssl and Openssl.
(Like for apache1.3.33 you need mod_ssl_2.8.22 and Openssl_0.9.7f or Openssl_0.9.7g.
                   Or
Select a mix of all three like [Apache_1.3.33-Mod_SSL_2.8.22-Openssl_0.9.7f-Win32.zip]
(for this install apache service also).
2.    Select   httpd.conf file from (apache\conf) open it for configuration.
3.   Stop the services of apache from Control panel \ administrative tools \ services.
         Note:-- may be it is possible all files for configuration will not be there in apache2.exe then extract the
          Apache_2.0.54-Mod_SSL_2.8.22-Openssl_0.9.7f-Win32.zip file and copy conf,lib,modules logs
files in corresponding folder of Apache2.exe.
                                             HTTPD.CONF   Configuration
1.     Replace all occurrences of www.my-server.dom with the real domain name!
       (If you have installed apache from .exe file then its doesnt required but for . Zip archive file you have to replace it)
2.     Comment port 80 like # port 80
3.     Write Listen 80 and Listen 443 in httpd.conf file.
4.     Extract Openssl in any folder and copy files ssleay32.dll and libeay32.dll into WINNT\SYSTEM32 paste them here.
5.     Download Openssl.cnf file because you need to configure openssl.exe. a link apear select saveas and save it to bin folder of apache2 directory
6.     Copy all the *.exe, *.so, *.dll inside your apache\bin directory from extracted Openssl directory.
7.     Write
              LoadModule ssl_module modules/ApacheModuleSSL.dll
                  or
              LoadModule ssl_module modules/ApacheModuleSSL.so
                  or
              LoadModule ssl_module modules/mod_ssl.so
             after the LoadModule lines that are already in the httpd.config file
      8.    Write AddModule mod_ssl.c this for apache1 for apache2 it is noy required.
           after the AddModule lines that are already in the httpd.config file.
     9. Add the following to the end of httpd.conf:
                    SSLMutex sem
                    SSLRandomSeed startup builtin
                    SSLSessionCache none
                    SSLLog logs/SSL.log
                    SSLLogLevel info
                    SSLEngine On
                    SSLCertificateFile conf/ssl/my-server.cert
                    SSLCertificateKeyFile conf/ssl/my-server.key
                    ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
ProxyPass / http://ServerName:50000/     // your server name and port number
ProxyPassReverse / http://ServerName:50000/   // your server name and port number
ProxyPreserveHost On
save the Httpd.conf file
                                                 GENERATING CERTIFICATE
a.     Open Command Prompt
b.     Reach till bin directory by writing like   cd apache\bin
c.     Write command     bin> openssl req -config openssl.cnf -new -out my-server.csr and put required detail.
d.      Write openssl rsa -in privkey.pem -out my-server.key.
e.     Write openssl x509 -in my-server.csr -out my-server.cert -req -signkey my-server.key -days 365.
f.     Write openssl x509 -in my-server.cert -out my-server.der.crt -outform DER.
g.     Create an Apache/conf/ssl directory and move my-server.key and my-server.cert into it.
10.     Start Apache services from control panel \ Administrative tools \ services.
11.     Now you have made Apache as SSL enabled open browser and test it by https://localhost

Problem while connecting to external ABAP system (on 4.6C rel)

Hi All,
I've created WebDynpro application that is supposed to fetch info about users from several ABAP systems. J2EE engine that runs this WebDynpro is directly connected to one of the ABAP systems. I've successfully created identical Adaptive RFC models, maintained SLD entries for my ABAP systems and configured JCO connections for my WebDynpro through WebDynpro Content Manager (http://<host>:port/webdynpro/welcome). I was able to reach all ABAP systems testing my JCO connections from WebDynpro Content Manager.
The problem I am experiencing is the following:
the application is working fine for the ABAP system that J2EE (where it's executed) is connected to, but failed to reach the remote ABAP system issuing the following message:
"Accessing System <Remote ABAP system> is not possible because RFC Metadata was retrieved using System <ABAP system that J2EE is connected>. Please assure you have configured the RFC Connections properly. A Server restart may be necessary!"
Where else should I have define JCO settings ?
This remote ABAP system is running on 4.6C so I have no options to install J2EE on it or fully configure SLD for that system.
It may seem like a dummy question since I am new to WebDynpro programming.
Thanks in advance,
Mike

Hi Rich,
Thank you for a quick reply,
Here is what I've done to connect to the remote ABAP system:
1. Configured this remote system in the SLD as a Technical System (SLD=> Technical Landscape).
2. Opened WebDynpro Content Administrator and created two JCO's for my application pointed to that remote ABAP system (defined in SLD). I was able to test them successfully reaching that remote system.
But when I run my application the same error occured.
What did I miss ?
Thanks & Regards,
Mike
Message was edited by: Mykhaylo Puzankev

Internal Server error while configuring External service for CAF

Dear All,
While configuring the External Service (RFC) for CAF Core project in our EP7 SP11 server we are getting error message we are getting Internal server error when we click on service registry.
500   Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
    at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
    at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
    at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
    at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
    ... 47 more
Please let me know what shd be done to correct the error.
Warm Regards
Mazdul
[email protected]

The solution is mentioned in this thread:
Error on External Serrvice Configuration Page NW 20047s SP10
re-create your configuration if possible and see whether that fixes it

Problem while configuring OSB External Resource in BPM Studio

Similar Messages

Maybe you are looking for