Problem while creating Table control with wizard
Hi All,
I am using the table control wizard.
Following is the declared data :
TYPES: BEGIN OF test_str,
name TYPE string,
city TYPE string,
END OF test_str.
DATA: lt_str TYPE STANDARD TABLE OF test_str,
ls_str TYPE test_str.
I activated the program after declaring this..
then I created a screen.
while generating the table control , i give the internal table name as lt_str and work area as ls_str(both of these are also coming in F4 help) , i am getting the following error :
the table work area ls_str does not exist or is not a structure.
Please help.
Regards
Panneer
HI Selvam
In the wizard please choose the radio button internal program table. I hope you might have choosen the dictonary table.
And activate the program before generating the wizard.
Please try this and let me know if any issues.
Thanks
Praveen
Edited by: Praveen Kumar on Feb 4, 2010 4:34 AM
Similar Messages
-
BDC: How to enter data in Table control (With wizard) using scrolling?
Using BDC, I am trying to enter the data in the table control (with wizard).
I want to know what is the specific command to scroll down in table control (With Wizard).
While recording I am getting these steps:
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
When I use above command and run BDC, it does not scroll.
Kindly let me know where am I going wrong.
Thanks in advance for your kind help.
AshishThe transaction is CK94
and the BDC recording is :
T CK94
SAPLCKBASCR1 0200 X
BDC_CURSOR CKI94A-BDATJ
BDC_OKCODE =ENTR
CKI94A-MATNR 10000789
CKI94A-WERKS VA79
CKI94A-BDATJ 2005
CKI94A-MGTYP ZDU01
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MISCH_VERH(02)
BDC_OKCODE /00
CKI94B-MIXCOST_PC(01)
CKI94B-MIXCOST_PC(02) X
CKI94B-MISCH_VERH(01)
CKI94B-MISCH_VERH(02) 40
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MISCH_VERH(07)
BDC_OKCODE /00
CKI94B-MIXCOST_PC(07)
CKI94B-MISCH_VERH(07) 60
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE =STOR
BDC_OKCODE '/00' is recorded when I scroll down in the table control.
Thanks for your kind concern.
Ashish -
How to create table control without wizard....???
Hello experts !!
Plz tell me how to create table control without wizard.
for sflight table.
Scenario 1
I have one screen like 1000.
There i have taken carrid, connid, fldate as criteria.
Now i want to display Planetype, Price, Seatsmax in the table control.
Scenario 2
i have two screens 1001, 1002.
in the screen 1001 i have taken carrid, connid, fldate as criteria and there is a Button.
when i will click the button it will show the price, planetype and seatsmax in the table control in the next screen, i.e 1002
plz help me out...
and how to save new record in the dictionary table from that table control....Hi
see the sample programs and design accordingly
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
just refer to the link below
http://www.sapmaterial.com/tablecontrol_sap.html
step by step procedure with screen shots
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Regards
Anji -
Table control with wizard in module pool
Hi Gurus!!
First I have an ztable for header and ztable for item of the purchase order. We have the requirement of first uploading the data into ztable and then perform bapi or bdc on it. So, before the data goes into the ztable we have to create screens to show the data,and if any error it should be corrected and then send it to the ztable.
So,in the screen I created a table control using the wizard where I gave the internal table and work area I declared for the item ztable.
Now, I need to give a condition to the table control such that only the details of a single vendor should be displayed in the table control but not all.
Note: The vendor field in the item ztable is the value key and its check table is the header ztable.
I am not able to give a condition in the PAI of the screen where the loop gets created for the table control.
Could someone please help me with this issue.
Thanks and Regards,
Vishwa.Instead of putting a condition to the table control level u can do 1 thing ..create another internal table for ztable (lineitem). And based on ur condition populate this table from the main table and then display this table to the table control.
Regards,
Joy. -
Problem while creating Sale Order with Reference
Hi Friends,
While creating a Sale Order with Reference, I am unable to copy few fields from Profit Segement(CO - PA Data) in Account assignment Tab.
Any solution how to copy all field values which are in Reference Sale Order Number.
Regards,
sg.Hi,
Go to VOFM you will find out data transfer routine.
Over here go for the order data transfer routine and select your data transfer routine which you use.
Now check you field name and table name for that particular field which was not copying.
It will be better if you ask your abaper for this.
You have to make changes over here only for data transfer routine.
Hope so this will help you out.
Regards
Raj. -
Performance problem while creating table at runtim
I have pl/sql block like
Begin
Exceute immediate 'drop table x '
Execute immediate 'create table x as select .... stament (complex select by joining 7-8 tables);
Execute immediate ('create index ind1 on table x'); -- i am not writing the full syntax
End;
The select statement used in create table is fetching 10 millions of rows (approx).
The above pl/sql block is taking 30-45 minutes.
Without going in depth of query used in select (as i have to explain the functionality otherwise),
Could any one please suggest to create a table in fatset way like nolooging or seperate tablespace with bigger block size or any change in any DB parameter etc.
The db server is having excelent hardware configuration 32GB ram , multi CPU (16 CPUs) , Huge hardisk.
ThanksCREATE OR REPLACE VIEW VW_CUST_ACCT_BUS_REQ AS
SELECT FC.V_CUST_NUMBER,
FC.V_ACCT_NUMBER,
FC.V_ACCT_CUST_ROLE_CODE
from Fct_Acct_Cust_Roles FC --current schema table
join dim_jurisdiction DC on DC.V_JURISDICTION_CODE = FC.V_SRC_CNTRY_CODE
JOIN VW_APPLN_PARAMS APP ON APP.V_PARAM_CATEGORY = 'KYC'
AND APP.V_PARAM_IDENTIFIER =
'KYC_PROCESSING_DATE'
AND APP.N_CNTRY_KEY = DC.N_JURISDICTION_KEY
AND FC.FIC_MIS_DATE = APP.d_Param_Date
UNION
SELECT BUS_CUST_ACCT.CUST_INTRL_ID,
BUS_CUST_ACCT.ACCT_INTRL_ID,
BUS_CUST_ACCT.CUST_ACCT_ROLE_CD
FROM BUS_CUST_ACCT --another schema's table containing rows in millions.
--Can you tell me any other method to acheive the above select
CREATE TABLE vw_kyc_dr_ip as
SELECT FCU.V_SRC_CNTRY_CODE JRSDCN_CD,
FCU.V_CUST_NUMBER v_cust_id,
FACRS.V_CUST_NUMBER v_ip_cust_id,
ROLS.F_CONTROLLING_ROLE f_cntrl_role
FROM VW_CUST_BUS_REQ FCU -- This is another Mview it contains data approx 50,000
JOIN VW_CUST_ACCT_BUS_REQ FACR/* see above view definition, contains rows in millions */ ON FCU.V_CUST_NUMBER = FACR.V_CUST_NUMBER
JOIN VW_CUST_ACCT_BUS_REQ FACRS ON FACR.V_ACCT_NUMBER = FACRS.V_ACCT_NUMBER
JOIN DIM_ACCT_CUST_ROLE_TYPE ROLS ON ROLS.V_ACCT_CUST_ROLE_CODE =FACRS.V_ACCT_CUST_ROLE_CODE
UNION
(SELECT FCU.V_SRC_CNTRY_CODE JRSDCN_CD,
FCU.V_CUST_NUMBER v_cust_id,
FCR.V_RELATED_CUST_NUMBER v_ip_cust_id,
'N' f_cntrl_role
FROM VW_CUST_BUS_REQ FCU
JOIN VW_CUST_CUST_BUS_REQ FCR ON FCU.V_CUST_NUMBER =
FCR.V_CUST_NUMBER
JOIN VW_APPLN_PARAMS P ON P.V_PARAM_IDENTIFIER = 'KYC_PROCESSING_DATE'
AND P.V_PARAM_CATEGORY = 'KYC'
AND FCR.D_RELATIONSHIP_EXPIRY_DATE >=
P.D_PARAM_DATE
JOIN DIM_JURISDICTION ON DIM_JURISDICTION.N_JURISDICTION_KEY =
P.N_CNTRY_KEY
AND DIM_JURISDICTION.V_JURISDICTION_CODE =
FCU.V_SRC_CNTRY_CODE
MINUS
SELECT DISTINCT FCU.V_SRC_CNTRY_CODE JRSDCN_CD,
FCU.V_CUST_NUMBER v_cust_id,
FACRS.V_CUST_NUMBER v_ip_cust_id,
'N'
FROM VW_CUST_BUS_REQ FCU
JOIN VW_CUST_ACCT_BUS_REQ FACR ON FCU.V_CUST_NUMBER =
FACR.V_CUST_NUMBER
JOIN VW_CUST_ACCT_BUS_REQ FACRS ON FACR.V_ACCT_NUMBER =
FACRS.V_ACCT_NUMBER
JOIN DIM_ACCT_CUST_ROLE_TYPE ROLS ON ROLS.V_ACCT_CUST_ROLE_CODE =
FACRS.V_ACCT_CUST_ROLE_CODE
AND ROLS.F_CONTROLLING_ROLE = 'Y'
UNION
(SELECT FCU.V_SRC_CNTRY_CODE JRSDCN_CD,
FCU.V_CUST_NUMBER v_cust_id,
FCR.V_CUST_NUMBER v_ip_cust_id,
'N' f_cntrl_role
FROM VW_CUST_BUS_REQ FCU
JOIN VW_CUST_CUST_BUS_REQ FCR ON FCU.V_CUST_NUMBER =
FCR.V_RELATED_CUST_NUMBER
JOIN VW_APPLN_PARAMS P ON P.V_PARAM_IDENTIFIER = 'KYC_PROCESSING_DATE'
AND P.V_PARAM_CATEGORY = 'KYC'
AND FCR.D_RELATIONSHIP_EXPIRY_DATE >=
P.D_PARAM_DATE
JOIN DIM_JURISDICTION ON DIM_JURISDICTION.V_JURISDICTION_CODE =
FCU.V_SRC_CNTRY_CODE
AND DIM_JURISDICTION.N_JURISDICTION_KEY =
P.N_CNTRY_KEY
MINUS
SELECT DISTINCT FCU.V_SRC_CNTRY_CODE JRSDCN_CD,
FCU.V_CUST_NUMBER v_cust_id,
FACRS.V_CUST_NUMBER v_ip_cust_id,
'N'
FROM VW_CUST_BUS_REQ FCU
JOIN VW_CUST_ACCT_BUS_REQ FACR ON FCU.V_CUST_NUMBER =
FACR.V_CUST_NUMBER
JOIN VW_CUST_ACCT_BUS_REQ FACRS ON FACR.V_ACCT_NUMBER =
FACRS.V_ACCT_NUMBER
JOIN DIM_ACCT_CUST_ROLE_TYPE ROLS ON ROLS.V_ACCT_CUST_ROLE_CODE =
FACRS.V_ACCT_CUST_ROLE_CODE
AND ROLS.F_CONTROLLING_ROLE = 'Y'
Kindlt advice me on technical side , i think it is difficult to make you understand functionality. -
Problem while creating XDO Report with PL/SQL
hi,
i am trying to create
1.created XDO Report with the help of PL/SQL which takes two parameters and code for writing XML tags to output file
2.created concurrent program that will call the PL/SQL pkg
here i am trying to create the xml out put bu t i am stuck with some errors below is the code
create or replace
PACKAGE AgentTimeReport_XDO_pkg AS
TYPE srdaterange_rec is RECORD (
fromsrdate varchar2(20 byte),
tosrdate varchar2(20 byte)
Type agent_table IS TABLE OF srdaterange_rec INDEX BY BINARY_INTEGER;
procedure GetAgentTimeList(o_errbuf OUT VARCHAR2
,o_retcode OUT VARCHAR2,p_fromsrdate IN varchar2,p_tosrdate IN varchar2);
END AgentTimeReport_XDO_pkg;
create or replace
PACKAGE BODY AGENTTIMEREPORT_XDO_PKG AS
procedure GetAgentTimeList(o_errbuf OUT VARCHAR2
,o_retcode OUT VARCHAR2,p_fromsrdate IN
VARCHAR2,p_tosrdate IN VARCHAR2 )
IS
cursor cs_agenttime(p_fromdate IN VARCHAR2,p_todate IN VARCHAR2)
is
SELECT
incident.Incident_Number as ServiceRequestNumber,
TO_CHAR (incident.incident_date,'DD-MON-YYYY') as ServiceRequestDate,
incident.Summary as Summary,
agenttime.agentname as AgentName,
to_char(agenttime.agentstarttime,'DD-MM-YYYY HH24:MI') as StartTime,
to_char(to_date('00:00:00','HH24:MI:SS') +
(agenttime.endtime-agenttime.agentstarttime), 'HH24:MI') as TimeSpent
FROM cs_incidents_all_b incident,cs_agenttime_agv agenttime
WHERE agenttime.incident_id=incident.incident_id
AND incident.incident_date between to_date(p_fromsrdate,'DD-MON-YYYY')
AND to_date(p_tosrdate,'DD-MON-YYYY');
BEGIN
/*First line of XML data should be ‘<?xml version="1.0" encoding='utf-8'?>’*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0" encoding="utf-8"?>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<AGENTTIME>');
FOR cs_agent IN cs_agenttime(p_fromsrdate,p_tosrdate)
LOOP
/*For each record create a group tag <G_AGENT_TIME> at the start*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<G_AGENT_TIME>');
/*Embed data between XML tags for ex:- <EMP_NAME>Abeesh</EMP_NAME>*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SERVICEREQUEST_NUMBER>' ||
cs_agent.ServiceRequestNumber
|| '</SERVICEREQUEST_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SERVICEREQUEST_DATE>' ||
cs_agent.ServiceRequestDate ||
'</SERVICEREQUEST_DATE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<START_TIME>' || cs_agent.StartTime
||'</START_TIME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<TIME_SPENT>' || cs_agent.TimeSpent
||'</TIME_SPENT>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</G_AGENT_TIME>');
END LOOP;
/*Finally Close the starting Report tag*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</AGENTTIME>');
END GetAgentTimeList;
END AGENTTIMEREPORT_XDO_PKG;any one help me
the log file
Service: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
DEMOXDO module: DemoAgentXDO Report
Current system time is 28-JUL-2009 05:16:46
**Starts**28-JUL-2009 05:16:46
ORACLE error 1861 in FDPSTP
Cause: FDPSTP failed due to ORA-01861: literal does not match format string
ORA-06512: at "APPS.AGENTTIMEREPORT_XDO_PKG", line 9
ORA-06512: at "APPS.AGENTTIMEREPORT_XDO_PKG", line 25
ORA-06512: at line 1
The SQL statement b
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 28-JUL-2009 05:16:46
---------------------------------------------------------------------------Hi,
Please see if these documents help.
Note: 367607.1 - FDPSTP Failed Due to ORA-01861: Literal Does Not Match Format String
Note: 370272.1 - not able to run the report set having unsupported date format of fnd-date4
Note: 376034.1 - How to Handle New Date Formats in SQL*Plus and PL/SQL Procedures?
Regards,
Hussein -
Problem while creating table maintenance generator using two step
Hello All,
I have created a Z table in which I have 7 fields, out of which 6 are character fields and 7th field is of type INT4
Now when I create the maintenance generator using TWO STEP approach, the 7th field i.e., of type INT4 is not available in the first screen (the table control screen). This screen only has 6 fields for display.
But when I click NEW ENTRIES button, I get the next screen which has all the 7 fields.
But if I create the maintenance generator using SINGLE STEP, all 7 fields are displayed in the first screen.
Please suggest. Let me know if you require some more explaination.
Thanks & Regards,
TarunHi Tarun,
Go to the layout and increase the size of the Screen. or at the screen attributes change the length and width values.
You know that initially the screen occupies default size only.
Hope this would serve your purpose.
Cheerz
Ram -
Problem while creating a JButton with an Icon
Hello,
I'm experiencing a problem while setting an Icon to a JButton. Here is my code :
Icon icon = new ImageIcon("TRONCONCIRC1.gif");
JButton switchTypeButton = new JButton();
switchTypeButton.setIcon(icon);
switchTypeButton.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e){
// Some Action
});The button works well, but there is no icon on it.
Does anyone have an idea ?
thanks,Icon icon = new ImageIcon("TRONCONCIRC1.gif");
//I thinks that the only problem it can be is that there is a wrong path
//to your icon. Try tthe following. I am right if this will write null.
System.out.println(icon);
JButton switchTypeButton = new JButton();
switchTypeButton.setIcon(icon);
switchTypeButton.addActionListener(new
ener(new ActionListener(){
public void actionPerformed(ActionEvent e){
// Some Action
}); -
Problem while creating table dynamically using stored procedure
Hi all
When i try to execute the following lines get insufficient privilege error.
FYI: i m able to create table statically.(i.e without using stored procedure)
CREATE OR REPLACE PROCEDURE pcalling IS
str varchar2(60);
BEGIN
str:='create table t15(tno number,tname varchar2(5))';
execute immediate str;
END;
Thanks in advance
Satyahi
SQL> CREATE OR REPLACE PROCEDURE runddl (ddl_in in VARCHAR2)
2 AUTHID CURRENT_USER
3 IS
4 BEGIN
5 EXECUTE IMMEDIATE ddl_in;
6 END;
7 .
SQL> /
Procedure created.AUTHID CURRENT_USER clause before the IS keyword which runddl executes, it should run under the authority of the invoker, or current user not the authority of the definer.
if you omit it then it will no longer will be run if the creator doesnt have privelege to run this ddl regardless invoker has or not.
i hope you got it
Khurram Siddiqui
[email protected] -
Problem while creating HR report with PNP LDB
Hi Experts,
I am working on HR Report using LDB PNP.
In HR REPORT CATEGORY,i have mentioned "___00003" in Master Data radio button.
Now i can create my own selection screen.In my Selection-Screen i am using pushbutton.
Code is:
SELECTION-SCREEN:
PUSHBUTTON 5(15) but1 USER-COMMAND cli1,
PUSHBUTTON 30(15) but2 USER-COMMAND cli2.
INITIALIZATION.
but1 = 'PDF FORMAT'.
but2 = 'FILE FORMAT'.
AT SELECTION-SCREEN.
CASE sscrfields.
WHEN 'CLI1'.
PERFORM PDF.
WHEN 'CLI2'.
PERFORM FILE.
ENDCASE.
While executing i have clicked on 2nd pusbutton.
It is going to CASE and also i am getting value of sscrfields = CLI2 .
also sy-subrc = 0.
but after that it is not going to WHEN condition.
Can anybody plz help me out in this.
Regards,
AnkurSSCRFIELDS is a structure so you have to ask:
CASE SSCRFIELDS-UCOMM.
WHEN xx.
ENDCASE: -
Vertical scroll bar in table control with wizrads
Hi,
Im working on a table control with a customised table. I created a table control with wizards. But vertical scroll bar is not working. How can i invoke vertical scroll bar and can any one provide the code for the all the operations on a table control like save,find,find next,change....Thanks in advance.
AvinashHi Avinash
move the records number of your internal table into field LINES of tablecontrol. So you should change the code generated by wizard in PBO, for example create a new module:
PROCESS PBO
MODULE SET_DATA_TO_T_CTRL.
LOOP..
ENDLOOP.
MODULE SET_DATA_TO_T_CTRL.
DESCRIBE TABLE ITAB LINE SY-TABIX.
<TABLECONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max -
Entity Attributes are not populating while creating EO using EO wizard.
Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
SagarikaPlease ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ -
Problem in creating Maintenance Order with multiple operations
Hello all,
I am facing problem while creating Maintenance Order with multiple operations and sub-operations. I am using BAPI : BAPI_ALM_ORDER_MAINTAIN.
For single operation it is working fine,but i am unable to create MO with multiple operations and sub-operations.
Please, provide me the inputs required,
I have used methods :
ORDER CREATE,
OPERATION CREATE
and SAVE.
Regards,
SiddharthaHi,
The FM you are using is a perfect one. This FM is bit tricky to use. You need to perfectly pass the Reference number field. which links various input table parameters of this FM.
Thanks & Regards,
Navneeth K. -
Creation of a Table control with the wizard
Hi all,
I'd like to add a table control to my dynpro with the wizard.
I want to use an internal table and a work area from my program but I get the following error :
"The table work area WA_FID does not exist or is not a structure".
here is my data definition:
types: begin of fid_line,
dokar type draw-dokar,
doknr type draw-doknr,
doktl type draw-doktl,
dokvr type draw-dokvr,
dktxt type drat-dktxt,
dokst type draw-dokst,
end of fid_line.
data : it_fid type table of fid_line,
wa_fid type fid_line.
I also tried using field symbol as work area.
I thought it was possible to create a table control from a user internal table.
Did someone see the problem ?
Thanks
Sylvain V.Hi,
Check the below link.
In this, I am not using wizard,but manually creating table control and I am not using user defined types.I don't think it is possible to use user-defined internal table in wizard.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/table control in abap.pdf
Maybe you are looking for
-
Hi All, A PDF file is attached to SAP Document Info Record. While opening that PDF file through CV03N getting a messege like - "Error while executing C:\DOCUME~1\.................." What can be the reason for this & how it can be soleved? Regards MHP
-
How can I see costs on WBSelement before settlement on definitive asset
Hi, We have direct investment on WBSelement (posted as statistical value -value type 11- on WBS element). So at order entry, we get for example 100 on a classe 23 account (asset under construction account in french chart of accounts). When the AuC i
-
CRXIR2 image from blob field and some fonts not displaying in PDF export
I used CRXIR2 developer edition to create a report linked to a SQL 2000 database table. There is a blob field containing a JPG image that is different for each record in the table. I am using VB.NET code with ASP.NET 2.0 to programmatically change
-
since I changed my notebook from Macbook Pro 2 Sony Yario the problem was born
-
While processing MIRO, received a error message that express document upda
Hi, When i am processing document through MIRO,i got an error messge that Express document update was terminated. Can anybody let me know the possible solution for this.