Problem while creating WebAS ABAP Technical System in WAS 7

Hi All,
I have installed WAS 7 and EP 7 SP9 as part of SR2 Installation. I had checked the option configure local SLD. I have to create and SLD to conenct EP to ECC 6.
When I was creating the Technical System, at the last step i found out that ECC 6 was not available in the installed products(only ECC 5 was available). So i Upgraded CR Content to SAP_CR 3.2 and CIM to 1.5.20. When I am trying to create the Technical System again I do find ECC 6.0 in the Installed Products but there are no corresponding Installed Components for ECC 6.(The same exists for ECC 5). as a result I am not able to create the Technical System as atleast one component has to be selected. I have tried re importing the CIM Model and cr content again but its not working.
When I select SLD Data Supplier in Visual Admin I get the following error message.
Error While loading service SLD Data Supplier
java.lang.ClassNotFoundException: com.sap.sldserv.vaclient.ClientManagement
Is there any solution to this. Points will be given.
Regards,
Shyam.
Message was edited by:
Shyam R Nair

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

Similar Messages

Problem creating new ABAP Technical System in SLD

I newly installed a ECC 5 IDES system (ABAP + JAVA) on my computer for ABAP and Webdynpro learning.
I got problem when I try to create new ABAP Technical System in SLD.
I put my steps of installation here so you know my full story.
1. Install Central Instance (Non-unicode);
2. Install Database Instance (Non-unicode);
3. Install Java add-in on ABAP;
4. Configure the HTTP connection parameters in J2EE Engine Visual Administrator
All of the above steps are successful.
Now my Webdynpro application need to access a Function Module, so I want to create a JCo connection in Webdynpro Content Administrator, but both application server and message server are not available, so I can't create any connection.
I go back to SLD to register ABAP Technical System step by step below:
1.      Choose Home ® Technical Systems.
2.      Choose New Technical System.
3.      Select the AS ABAP radio button.
4.      Choose Next.
5.      Enter system details (Installation number, host name).
6.      Choose Next.
7.      Enter message server and central application server details.
8.      Choose Next.
9.      Choose Next.
10.    Add New Client 800, leave logical name blank, click Add.
11.    Choose Next.
12.    Here the system says 'No product available', the whole effort make no sense.
I tried every possible settings, but at step 12 it keeps telling me 'No product available'.
This is the problem I want to fix.
Can anyone help me?
Thanks a lot in advance.

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

Problems while creating Web Services in development server

Hello,
We are facing problems while creating Web services . The transaction like WSADMIN, WSCONFIG are not there in development server. Its gives message u2018This transaction is obsoleteu2019.
Due to this while creating Webservice, there is and error message . Kindly guide me whats needs to be done.
We have also tried the transaction WSADMIN2 as suggested by SAP, but didnu2019t know wat needs to be done.
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 9:15 AM

Hi,
With your help, we were configuring WEB Service through soamanger.Due to some problem, we couldn't proceed further.Kindly guide us with the further steps.
*steps followed *
Step 1 : Entered Service Registry Parameters in WSPARAM .
Step 2 : In transaction SOAMANAGER->Technical Configuration -->System Global settings
Step3 : From u2018SE80u2019 transaction, selected the package ZHR and then right clicked to create the enterprise service -> Client Proxy (Service Producer)
We have followed steps in se80.Don't know how to proceed further.
We are unable to find the service in soamanger .How to find the service name in soamanager?
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 12:38 PM
Edited by: Rachel on Feb 3, 2009 12:48 PM

Problem while creating web service proxy in Jdeveloper 10.1.3

I am using Jdeveloper 10.1.3 to create a web service proxy so that I can track my request/response in HTTP Analyzer.
I am following the steps as mentioned in the follwoing uRL:
http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
But I get the following warning while creating the web servcice proxy:
Generating proxy
WARNING: value type package prefix is ignored for the types defined in the schema that has same target namespace as the target namespace of wsdl: <my web service namepsace>
Proxy generation finished
After adding my code in the main methoad of proxy, I get the following error while compiling:
WARNING: Unable to connect to URL: <my web service proxy URL> due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
Please help as how to solve this.
Edited by: user11258855 on 02-Jul-2009 03:38

I am using Jdeveloper 10.1.3 to create a web service proxy so that I can track my request/response in HTTP Analyzer.
I am following the steps as mentioned in the follwoing uRL:
http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
But I get the following warning while creating the web servcice proxy:
Generating proxy
WARNING: value type package prefix is ignored for the types defined in the schema that has same target namespace as the target namespace of wsdl: <my web service namepsace>
Proxy generation finished
After adding my code in the main methoad of proxy, I get the following error while compiling:
WARNING: Unable to connect to URL: <my web service proxy URL> due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
Please help as how to solve this.
Edited by: user11258855 on 02-Jul-2009 03:38

Problem While creating DB connect source system to BW

Hi Guys,
While Creating DB sourc system in BW.The source system was not creating.
Sorcesystem-Create- selected the DB source system
Logical system: TAXIA03TST
Description:For Testing
DBMS:ORA
Username:
Pass word:
Given the ORA user name and password
Connection info:TAXIA03TST
After that it was saved.
After that it was going to the pop up screen Sytem log ,correct ,cancel
whe i select the correct,the source system was not created.
Can anybody help me out in creating the DB dource system.As it was very urgent.
points will be awarded.
Thanks,
Venkat

Hi,
This may help you to some extent:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Please check the SAP Note 339092
regards,
Pruthvi R

Problem while creating a ABAP Quarry report for material master

Hi Friend,
While I am trying to create a Quarry, certain warning message is coming and while I am executing single material is coming too many times in report with all currencies.
Picking the data from Table: MARA, MARC, MARD, MAKT, MBEW, QMAT, AND T001 (FOR Currencies only).
I need your help to clarify 2 point:
Where I should assign the table with whom as I have simply selected the table one by one assigned button clicked.
2nd How and from which Table currencies could picked as here said warning is coming and a single material is coming multiple times with all currencies in report.
I have used as SQ03 then SQ02 and finally SQ01u2026..else I have checked the same in SQVI, but still I didnu2019t get any such fruitful.
Filed Description          List Display            Screen Display                  Table u2013 Field
Plant               X          X          MARC                        Material Code          X          X          MARA
Storage Location          X          X          MARD                       Storage Condition          X          X          MARA     - RAUBE
Material Type                    X          MARA
Old Material No          X                    MARA     - BISMT               Material Description          X                                    MAKT                                       Base Unit of Measurement          X                    MARA     - MEINS
Material Price (Moving)          X                    MBEW                                   Material Price (Standard)          X                    MBEW
Valuation Class          X                    MBEW     -BKLAS
Inspection Type          X                    QMAT     - ART                  Currency Key          X                    T001              -WARES
Rest of the field I have not written as you are aware about that .
Pl suggest or help me to prepare the doc in screen shot, will have a great help from you end.
Regards,
Pinku

Dear Vijay,
I have done the same as per your earlier, but for picking th ecurrency in display, I have given Table T001, whether it is o.k. or else what? Wheneven I am trying by th esam eway, system is poping a warning message and then it's executing , but displaying all the materials with all currecies means a single material is coming too amny times with all currecy, so I need to pick extact one and for that if you could do andcan send me a screen shot more helpful to me.
Thanks.
jbs.sap.mm                at the rate of hotmail.com
Pinku

WEBAS Java Technical system

Hi all,
Could you please give me an example of an application for which we would need to create WEB AS JAVA technical system?
Regards,
Ashish

Hi,
<i>Could you please give me an example of an application for which we would need to create WEB AS JAVA technical system?</i>
In case of java proxies,u will create java proxies from interfaces in IR.
But u would need some java application which will call methods of those java proxies,these proxies can be called using EJBs in java application.
You will create EJBs from thses proxies and then use one java application to call these EJBs.
When this java application gets executed it sends proxy message to XI,XI identifies this message with the help of technical ystem which should be of type WEBAS JAVA,because the server on which u deploy ur JAVA application is of type WAEAS JAVA.
So u need to create WEBAS JAVA technical system to send message from JAVA proxies.
Thanks.

WEB AS ABAP Technical System

Hi All,
I am Creating WEB AS ABAP Technical System in that it is asking me to specify Database host name.
Where i have to find this Database host name?
Plz tell me it is very urgent.
Thanks and Regards,
Phanikumar.

Hello Phani,
as much as i understood you you need the logical name of your database...crorrect?
Well if so you have mainly two two options:
1) If you have direct access to the database (db), then you should also have access to a db-managing tool. Start this tool and there you should find the correct name of your db
2) If your db is hosted not by you and you dont have access to the db directly, just ask the administartor of the db...he will tell you the information
Okay... hope i could help:
Cheers...
Stefan

Database tab is disable in Web As ABAP technical system

Hi All,
When i am creating abap technical system in portal, 'database' tab is disable.
Anyone can suggest ?
How to push system information from back end using SLD?
Thanks & Regards,
Vijay

Hi Sriram,
We maintained all the host entries and sap gateway services.
Still getting the probelm.
SLD DS Start Program
    0: vehpqty_VRT_00                            : Execute program: _SLD_APPL_SERV
    0: vehpqty_VRT_00                            : Execute program: _SLD_BCSYS
    0: vehpqty_VRT_00                            : Execute program: _SLD_CLIENT
    0: vehpqty_VRT_00                            : Execute program: _SLD_COMPSYS
    0: vehpqty_VRT_00                            : Execute program: _SLD_DBSYS
    0: vehpqty_VRT_00                            : Execute program: _SLD_GWSRV
    0: vehpqty_VRT_00                            : Execute program: _SLD_HTTPSERV
    0: vehpqty_VRT_00                            : Execute program: _SLD_INSTPRD
    0: vehpqty_VRT_00                            : Execute program: _SLD_INSTSC
    0: vehpqty_VRT_00                            : Execute program: _SLD_INSTSP
    0: vehpqty_VRT_00                            : Execute program: _SLD_IPSERV
    0: vehpqty_VRT_00                            : Execute program: _SLD_LIVECACHE
    0: vehpqty_VRT_00                            : Execute program: _SLD_MSGSRV
    0: vehpqty_VRT_00                            : Execute program: _SLD_RCC
    0: vehpqty_VRT_00                            : Execute program: _SLD_RFC
    0: vehpqty_VRT_00                            : Collection of SLD data finished
    0: vehpqty_VRT_00                            : Data collected successfully
    0: vehpqty_VRT_00                            : RFC data prepared
    0: vehpqty_VRT_00                            : Used RFC destination: SLD_NUC
    0: vehpqty_VRT_00                            : RFC call failed: Error when opening an RFC connection
    0: vehpqty_VRT_00                            : Existing periodic jobs removed.
    0: vehpqty_VRT_00                            : Program scheduled: 20140710 021500
    1: vehpqty_VRT_00                            : Event-controlled job already exists; scheduling not necessary
Thanks and Regards,
Vijay

About ABAP Technical Systems and Business Systems

Hi experts,
I have an Integration scenary with XI and an R3 vía RFC. I've already created it in the development environment and when I'm going to transport to Consolidation and Production I find that the ABAP Business System related to the ABAP Technical System of the R3 have a different name from the development one.
In the Integration Repository everything its OK because my scenario is developped on a third party system BS and TS. The problem is in the Directory because of the BS of the Message interfaces....
I think that transport Directory scenario with .tpt wont work. I'll probably have to develop it in each environment... What do you think?
Regards
Gonzalo

This is what you need to do to move from Dev to QA.
1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
3. Now, create the QA Tech and Business Systems in the QA SLD
4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
5. Now if you import the ID objects in QA , the business systems name will be renamed automatically.
Regards
Bhavesh

Re: problem while installing WEB-enyterprise

Ciao Rajeev
It looks like you don't have the http directory under your active
environment.
Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
'$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
peace
Claudio
-----Original Message-----
From: Rajiv Srivastava <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 19, 1999 8:48 PM
Subject: problem while installing WEB-enyterprise
while running escript to install HTTP library on my machine(WINNT server)
i am getting a error -
system Error : There are no distributions available for the application
HTTP
can anybody help.
rajeev
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Starmgmjo,
Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Error while creating web dynpro project from DTR

Hello,
I am getting following error while creating Web Dynpro project from DTR,
org.eclipse.jdt.core.JavaModelException: File /<track name><DC><package>/.classpath is read-only.
Still project gets created but evenif I check out view , it does not allow me to edit it.
Also I have checked in and activated some changes but active copy in DTR is not reflecting those changes.
I tried Add subtree option in DTR perspective for folders in this project. Is it result of that?
Please help me in this regard.
Thank You
Beena

Hi Beena,
.classpath file should not checked in to DTR(uncheck the Read only properties). It is local file it contains class path for local system.
Generally in webdynpro project only src folder should be checked in DTR.
Regards
Suresh

No ABAP technical systems in SMSY

Hello,
I've just set up a new Solution Manager Ehp1 and patched it to SPS23. In my SLD, I have two ABAP technical systems. However, I don't see them in SMSY. The associated product systems are present (one SAP ERP, the other SM itself).
I've tried to schedule a fetch from the SLD in Setup System Landscape maintenance from the SMSY menu and it doesn't show any errors. In addition, per note 1468559, I've run SMSY_FETCH_SYSTEM_UPDATE for a single system. Returns success but no technical systems.
If I try to create the technical systems manually in SMSY, there is no entry in the system type list for ABAP (I don't know if there should be or not, so even just confirming that it should exist would be helpful).
Any ideas on what else I can check to solve this issue?
Thanks.
Rob

Hi Rob,
The technical system maintanence in SMSY is not relevant for ABAP systems.
Technical system maintanence is required for non-ABAP systems like Java, TREX, MDM etc.
Check the Landscape setup guide for more details:
https://service.sap.com/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf
Regards,
Srikishan

Problem while creating data transfer process

Hi friends
I am using BI 7.0 version.
I m getting a problem while creating dtp
After activating DTP and selecting the execute button, I am getting the following error message:
Request cannot be processed in its current state
Messg no : RSBK209
can anyone help me on this problem
Thank

Hi Deepthi,
Also check the error message(long text) and paste it here...
check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
Hope this helps
Thanks
Kalyan

Problem while creating Service order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Hi Murgesh,
If GL code is not getting bydefault from the system it is needed to be provided by the user.
If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
it is avalible in deafult settings in order node
If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
But if your PO is not w.r.t. PM orders PR then needs to be given manully.
Ramesh
Edited by: RameshChandra Soni on Jul 25, 2008 8:16 AM

Problem while creating WebAS ABAP Technical System in WAS 7

Similar Messages

Maybe you are looking for