Problem while creting view

I am creating a view on 4 tables ANLZ,ANLA,ANLC,ANLB.
From ANAL i am taking AKTIV MEINS MENGE TXT50
and in ANLC GJAHR AFABE ZUJHR ZUCOD KANSW KNAFA ANSWL
NAFAV (KANSW and KNAFA ANSWL NAFAV are the two currency fields.
BUKRS ANLN1 ANLN2 BDATU KOSTL WERKS GSBER STORT and
KOSTLV from ANLZ AND AFASL NDJAR NAPRZ from ANLB tables.
when we create a datasource it is asking us to add a reference feild for currecy fields so i add
T093-WAERS(for crrency key).
my problem is when i create a view with these 4 tables ANLZ,ANLA,ANLC,ANLB i am fetching data correctly
for ex while selecting data i gave the following selection conditions company,asset number(1000001) ,businees area,year and Real depreciation area(AFABE) i am getting 1 record.
but if i create view with 4 tables ANLZ,ANLA,ANLC,ANLB along with check tables T093B as it is nesscary for creating a datasource i am getting more records 1.e for the same selection condtions ie(assest number = 1000001 is repeating times not only that other fields are same)where data for all the fields is same but only currency field .
How to over come this problem.any suggestions

Hi Shailaja,
Go for Infoset(Tcode : sq02) insted of View. You have more options.
For view you have to specify reference to currency and quantity fields(Currency/Quantity tab in view).
Hope it Helps
Srini

Similar Messages

Problem while importing view in repository.

Hi,
I am not able to include the complex view that i have created . I am able to execute the query of the view in the database and view values.
I have imported the view in the repository and updated the rowcount but when i tried to view data , it throws error.
Query Failed: [nQSError: 43093] An error occurred while processing the EXECUTE PHYSICAL statement.
[nQSError: 17001] Oracle Error code: 904, message: ORA-00904: "SA_VOL": invalid identifier
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
But SA_VOL is a valid column in the view.I don't know why it is throwing error like this.
The View is like this:
Create or Replace view CA_VIEW("UNIT_ID","BAN_ID","CA_VOL","SA_Vol") As Select b.unit_id,b.ban_id,(Select sum(NVL(AMOUNT*NVL((select rate from cc_rate where ccy1=p.ccy_id and ccy2 in (select b_ccy from params)),1),0)) from bal p where p.prod_id='CAA' and p.client_id in(select client_id from master where ban_p= b.ban_id)) CA_VOL,(Select sum(NVL(AMOUNT*NVL((select rate from cc_rate where ccy1=p.ccy_id and ccy2 in (select b_ccy from params)),1),0)) from bal p where p.prod_id='SBA' and p.client_id in(select client_id from master where ban_p= b.ban_id)) SA_Vol from bal p join master c on p.client_id= c.client_id join banr b on c.ban_p = b.ban_id group by b.unit_id, b.ban_id;
Is there is any limitation for importing complex view.
Waiting for reply. Any help really appreciated.
Thanks
Ashok
Edited by: user649689 on Nov 26, 2008 3:54 AM

Hi Ashok,,
This errorcode says that, you tried to execute an SQL statement that included an invalid column name or the column name is missing.
Recheck it and do that...
Thanks & regards
Kishore Guggilla

Problem while importing View in ODI 11g

Hi All,
When i try to import an interface which contains only tables, everything was fine.
But when i try to import an interface which contains a view, import is done with errors.
In mapping tab, that view is not displayed
Objects referenced in this interface are missing error
Any idea..?
Thanks

887684 wrote:
Hi,
Thanks for your reply.
Import mode i used is insert-update
I tried to import the view along with the interface not with models
That view is one of source in that interface
ThanksAlong with = the same time? Try the view first, then the interface.

Problem while Binding multiple Parameters to View Object[Solved]

Hello,
I am facing problem while binding multiple parameters with different data types in View Object query. For example suppose I have following query in my view object.
SELECT Header.ADDED_BY
Header.BATCH_ID,
FROM BATCH_HEADER Header
WHERE :1='deptAdmin' and Header.BATCH_ID
in
select batch_id from batch_header_dept_mapping where dept_id in(SELECT * FROM TABLE(CAST(:0 AS TABLE_OF_VARCHAR)))
I am able to pass the Bind variables of Array type for : 0 , using Steve's ArrayOfStringDomain example. (ArrayOfStringDomain) .
But after passing value to second bind parameter ie.. :1 .
I am getting the error as follows.
## Detail 0 ##
java.sql.SQLSyntaxErrorException: ORA-00932: inconsistent datatypes: expected - got CHAR.
I tried to set
setWhereClauseParam(1,11); // 11 is Number
setWhereClauseParam(0,arr); // arr is arr = new Array(descriptor,conn,deptid); for in parameter.
But of no use , Please let me know if any thing missing form me or have any another solutions. Also please provide me any example if have.
Thank you,
Sandeep
Edited by: user11187811 on Oct 23, 2009 7:27 AM
Edited by: user11187811 on Oct 26, 2009 12:52 AM
Edited by: user11187811 on Oct 26, 2009 6:51 AM

hi.
but when using non-Oracle named parameter binding styles as you've done (ie. , :1), regardless of what number you give each bind variable, they are sequenced 0, 1, 2 etc. As such your bind variable :1 is the 0th parameter, and your bind variable is the 1st parameter.Your statment is correct.
:1 i used was actually on 0th position and :0 was on 1 position. Like you said in sequence 0,1,2 etc. Now i get the answer and i corrected My mistake by assigning right values to right binding variable. and problem just solve.
Thanks Chris.

Problem while retrving data from a view

Hi Friends
i have a problem while retriving data from a view <b>v_t685a</b>.
the error message is :""" "V_T685A" is not defined in the ABAP Dictionary as a table, projection view or database view."""
i wrote : select single VTEXT1 from V_T685A into w_cst_jin1 where
                    KSCHL = 'JIN1' and
                    KAPPL = 'V'.
how to retrive the data.
waiting for quick response
Regards
Mukesh

Hi
This is a Maintenance View, not a Database View
SO can't fetch data using select statement.
You can use the Table <b>T685</b> directly to fetch the condition Types data straight away instead of the view. write the same select for this table and use.
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

Problems while facing Materialized Views

Hello All,
I am facing some problems while creating Materialized Views.
Senario.
SCOTT USER:
sql> Grant select on emp to Public;
sql> Create materialized view log on emp;
Connected to LDB User
sql> CREATE MATERIALIZED VIEW mt_emp
Refresh fast
as select * FROM scott.emp;
I am getting error.. Stating that Table doesnt Exist.
Please tell me the Reason..
Note:
If there is No Log on table Emp then it is throwing the error that there in no LOG on the EMP Table.
Now when I create a Log on EMP table --> Then it is giving the Problem that Table doesn't Exist.

Hello paragjp
The Below are the Steps I am Implementing..
Connect as Scott User.
SQL> Grant select on Emp to Public;
SQL> Create materialized view log on emp with primar key;
Now I will be Connecting to Other User Say LDB
Connect as LDB User
SQL> CREATE MATERIALIZED VIEW mt_emp
Refresh fast
as select * FROM scott.emp;
-- The Below Errors are comming
ERROR at line 3:
ORA-12018: following error encountered during code generation for "K5ESK_LDB2"."MT_EMP"
ORA-00942: table or view does not exist

Facing problems while creating tree view

Hi gurus,
I am facing problems while crating the tree view can please explain me what are the basic requirements for creating tree view and explain me which are the methods i need to redefine.
any answer is appreciated.
Regards,
Chetan Agali

Hi Chetan,
Maybe Poonam Assudani weblog may help you a little more. Check it's location here:
/people/poonam.assudani/blog/2009/06/24/create-a-tree-view-display-in-crm-web-ui
Kind regards,
Garcia

Problem while dropping a table

Dear All,
I am facing a problem while dropping a table in Oracle 10g.
I am able to find the number of records in the table but unble to delete it.
SQL> select count(*) from merchant_audit;
COUNT(*)
30028278
SQL> drop table merchant_audit;
drop table merchant_audit
ERROR at line 1:
ORA-00942: table or view does not exist
I have to drop this table from the database. Please help.
regards,
Santhosh

Hi,
IS it a table ? Is it your table ?
Read this example :
sqlplus scott/*****
SQL> create table merchant_audit(col1 number);
Table created.
SQL> create public synonym merchant_audit for merchant_audit;
Synonym created.
SQL> grant select on merchant_audit to merchant;
Grant succeeded.
SQL> conn merchant/merchant
Connected.
SQL> select count(*) from merchant_audit;
COUNT(*)
0
SQL> drop table merchant_audit;
drop table merchant_audit
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>
See owner into the dba_tables, and if synonym into dba_synonyms.
Nicolas.
Message was edited by:
Nicolas Gasparotto

Re: [iPlanet-JATO] Experiencing problem while executing model.

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Problem with a view in XK01 transaction

Hi All,
I am working on upload conversion for Vendor Master. While doing conversion, i am getting a problem with a Contact person view in XK01 transaction. In contact person view the telephone field column sometimes allowing to add data ,sometimes it's not allowing data which results an error in conversion program saying that the telephone field in not an input field. I don't know why the view is showing the telephone field like that.
Can any one suggest the solution for this problem. I know this is configuration problem with a view but i posted in ABAP forums.
Thanks

Hi Ben,
I assume that you are writing a BDC program to upload contact person information. If so, you are trying to populate a table control here. Please check to see if you are calculating the index to assign values to the correct rows.
if you are calculating index in your program then i think it should be configuration problem as you said.
Thanks,
Ganesh.

Problem while dropping snapshot

Dear sir
I am a junior dba, now I have a problem while I drop a customerinfo snapshot from Oracle 9.2.0.4 database. It seem to be the snapshot has been dropped correctly. But I found it's still remained in user's schema and looks like normal table.
I tried to drop it again but I got error ORA-12083: must use DROP MATERIALIZED VIEW to drop "customerinfo". But when I used command DROP SNAPSHOT CUSTOMERINFO; and DROP MATERIALIZED VIEW CUSTOMETINFO; It's still error ORA-12003 : materialized view "CUSTOMERINFO" does not exist.
Please give me some advice.
PS. Our system is Linux RHAS3 and Oracle 9.2.0.4 Database.

It could be that the MV was created on a prebuilt table.
If that is the case, the table must be dropped separately.
First make sure that you actually want to drop the table and lose the data.
Look for 'PREBUILT' under 'CREATE MATERIALIZED VIEW' in the docs.

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Facing the problem while creating sales order

Hi,
I am facing the problem while saving the sales order.
Error in system xxx/400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
Transmission log
u2022Product cannot be recoded for ERP System xxx/400(Notification E CRM_ORDER_MISC 015)
u2022Product cannot be recoded for ERP System xxx/400 (Notification E CRM_ORDER_MISC 015)
Kindly assist me.
Madhu

Hi Madhusadan,
Can you check whether the product exists in the ERP System or not? You can take the product names and can check the same using the Tcode: MM03 in ECC System. Also, it would be good if you have a look at the product from the CRM System if there are any errors or the product is already archived.
Is the Sales Order you are creating from a Preceding Transaction ?
Hope this helps.
Thanks,
Samantak.

Problem while reading XML file from Aplication server(Al11)

Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .

Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between.

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

Problem while creting view

Similar Messages

Maybe you are looking for