Attaching same style in Standard text as well as adobe form
Hi Experts,
I have created 2 styles. One in se72 and second one in smatstyles.
But when i use 1st one in standard text, i can't see this style in adobe form to attach.
And 2nd one i can see it in adobe form but i can't see in standard text.
I want only 1 style to be used in both places.
Please help.
Thanks in advance.
Hello,
You can achive this in two ways.
First - Go to the form interface and right click on the node create a text field in the form context.
In the properties tab on the right hand side of your form context you can specify Text Type.
Following Text type can be selected.
Include Text
Text Module
Dynamic Text.
As per your requirement select Include Text and then specify the NAME, LANG & TEXT ID for the text.
Once this is specified you can add this text field on the form layout.
NOTE: This normally works only if you maintain this text in the header or footer on the form but not at the line item level.
There are few issues when you try to print this text at the line item level.
To overcome this if your requirement is at the line item level follow second method mentioned below.
User READ_TEXT to read the standard text in your driver program. Then Pass the internal table returned with the text from this FM to another FM FORMAT_TEXTLINES.
This table is then used to map it on the adobe form. The second function module takes care of formatting.
Thanks
Similar Messages
-
How to use the separate symbol in the text field in the adobe form.
Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa;'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AMHi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce -
How to assign standard texts assign dynamically to smart forms
Dear Experts
I need your help in adjusting the smart form texts dynamically. I will explain you the situation please revert me your valuable answers.
1. I am integrating 12 smart forms using same program.
2. Out of 12 smart forms 4 forms are having similar kind of template. Client is requesting like create one smart form template.
3. By creating the standard texts you can assign the standard texts into smart form during runtime dynamically.
4. Maintain all standard texts for smart forms in another custom table, during run time of the program you can assign the standard texts to smart form.
5. Here my question is how to assign the standard texts to template texts dynamically ?
Please revert me your suggessions.
Thanks for your support.Hi Indra neel ,
You are maintaining all the standard texts in custom table right, u need to get standard text based on condition which works for your smartform
than create text module in smartforms and change that to include text and give the variable name or internal tbale with field name in that text name fields and press (>) button and give the remaining fields in that than that will work dynamically -
Incomplete text displayed in interactive ADOBE form
Hi Guys,
I have an interactive adobe form where a drop down will display "EQUIPMENT NO" W.R.T to the selection screen i/p
uporn selection of the "equipment number" the "EQUIPMENT NAME"field automatically populates.
I used to get an error message "Entry is too long",
got rid of it by setting the value of TYPE property of attribue to "MAXLENGTH" , uporn doing this the drop down and the discription text is displaying only last 3 char of the values.
I tried increasing the size/characters of the fields in the table in the form but was of no use. Any inputs will be AppreciatedYes I have checked all the subforms Flowed. Text field is working good in Preview Pdf Option of NWDS.
But when I generate the pdf on server, when TextField flows to next page, on next page it repeats from first line. -
Formatting Long Text gets disturbed during Adobe form Printing
Hi Guru's,
I have developed Adobe Form for PM work Orders (IW32) printing using Code u2018SFPu2019. The Order Contains order Long Text or Operation Long Text.
In my case the user maintains some table like structure in the Long text .e.g. ( Here the tab means the actual space and the text length can vary. So basically he will draw a table cells one below another by adjusting tab's)
Text 2 Tab Tab |___|___|
Te TabTab Tab |___|___|
I am reading this using READ_TEXT and it gets perfectly read.( I mean the tab positions will be intact. Also it will remain intact by the time ADS will get called)
When i submit this for generating Adobe Form the formatting of the tab positions gets disturbed and it prints something like
Text 2 |___|___|
Te |___|___|
How to keep the Tab positions intact while printing the Adobe Form? For SAP script printing it comes perfectly but for Adobe form printing it gets disturbed. Any idea how to handle this situation?
Thanks
PradeepTough request!
You have to calculate the widths of texts so that to determine to which tab position refers each tab character.
You might print the sapscript to OTF format, and read the OTF to get the exact positions (based on top left border of the page).
But now comes the second big issue: how to position a text in Adobe form at a dynamic position. That, I don't know. You might ask a question about this 2nd issue in forum -
Display Standard Program Graphic Report in Adobe Form
Hi All,
I'm new this field and really need you all expertise..
I have requirement which is to display Standard Program SAP Business Graphic Report (eg: Profile Matchup) in Adobe Form.
I also have read this blog but there is something i'm not clear...
/people/alex.liu/blog/2009/08/12/how-to-display-a-dynamically-generated-business-chart-from-igs-in-webdynpro-for-abap-application-and-adobe-interactive-form
What are the steps I should do:-
Looking forward for any reply..tqvm
Edited by: ahmad azlan on Jun 20, 2010 3:37 PMWhen you need to send a picture into the offline form:
another image question - using Regular ABAP not web dynpro and
Display a logo dynamically in adobe form
When you need to send a picture into the online form:
/people/bhawanidutt.dabral/blog/2007/11/15/how-to133-integrate-adobe-form-on-webdynpro-for-abap-and-deploy-it-on-portal
Otto
p.s.: refine your question, please -
Add field(Text-Field) in SAP Adobe form (SFP) @ line item level
Hi All,
I have copied SAP Standard Travel Request Form (FITP_REQUEST_FORM), and modifying it according to client's requirement.
The requirement is to display Comments field
I need to display some more details under Travel Itinerary & Services
Eg: Comments field for > Outbound Train , Outbound Flight etc.
The problem I am facing is unable to filter data in Node Request > Data > Car, Flight, Train, Hotel and others.
I have added text field in the Car node but its not retiveing data related to Car Comments its showing for Flight.
Regards,
Shree Wadekar
Useful answers will be rewardedSolved by my own
-
Text Object Error in Adobe forms
Hello Friends,
I am trying to include a text object in Adobe PDF-based print form.
In the context, I have created a node for the text. I chose the Text Type as Include Text. I am able to choose the required Text Object and Text ID from the respective search helps. When trying to activate the form, I am getting an error saying that I did not specify a text name. I tried to rectify this error but could not do so.
Please help me out on how to rectify this error.
Points will be rewarded for useful answers.
Thanks,
John.Are you giving the text name in single quotes.
-
hi all,
I would like to know how to add standard text (from SO10) in adobe form?
Regards,
Vinod.Creating a Text node by right clicking on the top node in the Context Tab of the Form and then
CREATE -> TEXT.
In the properties of the TEXT node select Text type Include Text and then provide the Text Name, Text Object, Text ID and Text Language values -
Give some functionlity of standard text
hi guru
please tell me functionlity of standard text,where exactly it use.
thanks
subhasiswe use standard text for scripts and smartforms.......
You can insert standard texts, texts of the online documentation, and hypertext modules into your document. You can insert texts directly and include them by reference.
When inserting text directly, the text is inserted in the editor in formatted form. You can then edit it further.
Inserting Standard Text
Choose Insert ® Text ® Standard.
The dialog window for inserting text appears.
Enter the text name, the text ID, and the language. To insert the text directly, select Expand immediately.
Choose Continue.
There are two ways to format texts with forms:
In the standard SAPscript text processing (Tools ® Word processing ® Standard text), you can select a form for a document. You can then type text into the main window of the form and output the document in the format defined in the form.
For example, you can select a form for a letter. You can then type the body text of the letter in the main window. When you print the letter, the default text elements in the other windows of the form (heading, footer, and so on) are printed with the body text.
To include the contents of another text into the current text, use the INCLUDE control command. SAPscript still treats the text to be included as a separate text. The text is copied over only at the point at which the output is formatted.
Thus the use of the INCLUDE command always ensures that the most current version of a text is included into the output, since the text is not read and inserted until the output is formatted.
Syntax:
/: INCLUDE name
You must specify the name of the text to be inserted. It can be up to 70 characters long. If the name of the text contains spaces, then you must enclose it in quotes as a literal value. You can, alternatively, specify the name via a symbol. All remaining parameters in the INCLUDE command are optional. If an optional parameter is not specified, then SAPscript uses default values as applicable for the calling environment.
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE 'E' PARAGRAPH 'A1'
The text with the name MYTEXT and the language E is included, regardless of the language of the calling text. The paragraph format A1 will be used as the standard paragraph type for this call.
Optional parameters:
LANGUAGE
If this parameter is not specified, then the language of the calling text or the form language are used for the text to be included. If the language is specified, then the text will be fetched in this language, regardless of the language of the calling text.
PARAGRAPH
The text to be included is formatted using the style allocated. The PARAGRAPH parameter can be used to redefine the standard paragraph for this style for the current call. All *-paragraphs in the included text will then be formatted using the paragraph specified here.
NEW-PARAGRAPH
The first line of the text to be included will be given this format indicator, as long as it is not a comment or command line. If the optional PARAGRAPH parameter (see above) is not specified, then all *-paragraphs of the included text will also be formatted using the paragraph specified in the NEW-PARAGRAPH command.
OBJECT
In order to completely specify a text, information about the text object is also required. There are a number of restrictions and other rules that depend on the object type of the calling text:
Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).
In the case of a document text (DOKU object), you can include only document texts. This object type is also assumed if no object is specified in this environment.
Only hypertexts and document texts can be included in a hypertext (DSYS object). If the OBJECT parameter is missing, then DSYS is used as the default value.
In the other kinds of text you can include only standard texts (TEXT object), document texts or hypertexts. If there is no specification, then the default object is TEXT.
ID
The text ID is a part of the text key, which permits further text objects within a given object. If no ID is specified, then the default include ID is used from the TTXID table for the calling text. If there is no entry in this table, then the text ID of the calling text is used.
The following consistency check is applied both to the ID and the object:
All text IDs are allowed in a form.
In document texts, only document texts may be included that have text IDs TX (general texts) or UO (authorization objects) and also other document texts with the same text ID as the calling document text.
In DSYS texts, all DSYS texts can be included, whatever ID they have. Document texts to be included must have one of the IDs TX or UO.
Into the other texts, standard texts with any allowable text ID, DSYS texts with all IDs, and document texts with the IDs TX and UO can be included.
The INCLUDE command returns a status code in the SAPSCRIPT-SUBRC symbol:
0: the text include was successful.
1: the command could not be executed because it contained syntax errors.
2: the rules governing the text to be included were not followed (see above).
This value cannot occur if the command is used in a SAPscript form.
4: the specified text could not be found.
reward points if helpful -
Difference jb/w text symblosin script and standard text in scripts
hi to all
can u pols explain about the
difference b/w text symblos in script and standard text in scriptshi
Default paragraph Paragraph set to * in <b>standard text</b> maintenance
If no form has been assigned to a text, the system automatically assigns the form SYSTEM, which contains minimal definitions for text formatting. There are two ways of formatting texts using forms: Use the <b>standard text</b> maintenance to enter and print the text.
Any kind of text can be included in a form. If no object is specified, then TEXT will be used (<b>standard texts</b>).
<b>
Text Symbols</b>
Text symbols acquire their values as a result of explicit assignment. To interactively assign text symbols, in the text editor choose Include  Symbols  Text. This method is available for all text symbols belonging to a text module as well as those of the associated form. Values defined in this way are lost when the transaction is left. If you want to print the text module again, then you must enter the symbol values again. The purpose of the DEFINE command is to provide a means of making this value assignment a permanent part of the text, so that the values are available again when the text module is called again. This command can also be used to re-assign a new value to a text symbol half-way through the text. Syntax: /: DEFINE &symbol_name& = 'value'
/: DEFINE &subject& = 'Your letter of 7/3/95' The value assigned can have a maximal length of 60 characters. It may itself contain other symbols. A symbol contained within the value assigned to another symbol is not replaced with its own value at the point at which the DEFINE command is executed. Rather, this replacement is made when the symbol defined in the DEFINE command is called in the text.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& = 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPscript If, however, the DEFINE command is written using the ':=' character rather than the '=' character, then any symbol contained within the value being assigned is replaced immediately with its current value. The assignment to the target symbol is made only after all symbols in the value string are replaced with their values. The total length of the value string may not exceed 80 characters. The target symbol must be a text symbol, as before.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& := 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPmail
Inserting <b>Text Symbols</b>
Procedure
Inserting a Text Symbol
1. Choose Insert → Symbols → Text.
2. Place the cursor on the desired text symbol.
3. Choose Choose.
4. The system inserts the text symbol.
Editing the Value of a Text Symbol
1. Choose Insert → Symbols → Text.
2. Choose Edit value bearbeiten. The dialog window Value definition for symbol <text symbol> appears.
3. Enter the appropriate value definition.
4. Choose Continue. In the dialog window Text symbols the specified value appears after the name of the text symbol.
5. Choose Continue.
Deleting all Text Symbol Values
1. Choose Insert → Symbols → Text.
2. Choose Delete all values. The system deletes all defined values.
3. Choose Continue.
Using Formatting Options for Text Symbols
1. Choose Insert → Symbols → Text.
2. Choose Options. The dialog window Formatting options for <text symbol> appears.
3. Fill in the fields.
4. Choose Continue.
5. Choose Continue. The system executes the selected formatting option.
regards
ravish
<b>plz reward points if helpful</b> -
hi to all abap Gurus
what is standard text in script ?how to use it > where do we use it ? we know that the use is reusability . how it is reusable . and it is used to support for multiple languages . pls tell in detail . pls dont give any link . points will bre rewarded defintilely for good answers . pls urgent. pls give som esample coding on this .Standard Text is nothing but Global Text.
Suppose you have to display footer/header info. whenever you create a s cript for ur org.your caompany details,logo etx. instead of writing them everytime, if you careta a global text u can include them wherevr u want.
Mainly we are using standard texts to avoid hardcoding in scripts or smartforms.
If you need to include the name of your company and address in the form you
just include a standard text in your form by include statement(script) and by
include text dropdown in forms. If in later part of time your company address
change you need to change the standard text not to touch the form. This is the
way standard text helps us.
in Tcode SO10, u create a text and give a name activate it.
Here is the sample code to send script through E mail..
*& Report ZRICHA_OTF_PDF
report zricha_otf_pdf
message-id zz.
CONSTANTS *
constants : c_x(1) type c value 'X', " For constant value
c_otf(3) type c value 'OTF', " For format
c_u(1) type c value 'U'. " Mail Option
VARIABLES *
data : v_rqident type tsp01-rqident, " For Spool Number
v_rqclient type tsp01-rqclient, " For Client
v_rqo1name type tsp01-rqo1name, " For Object name
v_spool type tsp01-rqident, " For Spool Number
v_spool1 type tsp01-rqident. " For Spool Number
FLAGS *
data : f_spool type c.
INTERNAL TABLES *
Internal table for sending mails
data: it_pdf like tline occurs 10 with header line,
it_xi_pdf like tline occurs 0 with header line,
it_html like solisti1 occurs 0 with header line,
it_xi_temp like bapiqcmime occurs 0 with header line,
it_xi_mime(255) type c occurs 0 with header line.
For sending mail
data: it_objpack like sopcklsti1 occurs 2 with header line.
Internal table for Single List with Column Length 255
data : it_objbin like solisti1 occurs 10 with header line.
Internal table for Single List with Column Length 255
data : it_objtxt like solisti1 occurs 10 with header line.
Internal table for Structure of the API Recipient List
data : it_reclist like somlreci1 occurs 5 with header line.
Structure of the API Recipient List
data: x_doc_chng like sodocchgi1.
Internal table for storing the variants
data : begin of it_variant1 occurs 0,
variant like varid-variant,
end of it_variant1.
Internal table to store variants for the programs
data: it_variant2 like it_variant1 occurs 0 with header line.
Internal table for storing the selected values
data it_return type ddshretval occurs 0 with header line.
Internal table for storing the mail-ids
data : begin of it_mailid occurs 0,
kokrs like csks-kokrs,
kostl like csks-kostl,
datbi like csks-datbi,
telx1 like csks-telx1,
end of it_mailid.
Internal table for storing the mail-ids
data : it_mailid1 like it_mailid occurs 0 with header line.
SELECTION SCREEN *
data : v_char type char50.
selection-screen begin of block b1 with frame title text-001.
select-options: s_email for v_char no intervals
lower case
no-display.
select-options: s_email1 for v_char no intervals
lower case
no-display.
selection-screen end of block b1.
selection-screen begin of block a1 with frame title text-028.
selection-screen begin of line.
parameters : p_c1 as checkbox.
selection-screen comment 3(66) text-026 for field p_c1.
selection-screen end of line.
parameters : p_set like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara1 type rs38m-selset.
selection-screen end of block a1.
selection-screen begin of block a2 with frame title text-029.
selection-screen begin of line.
parameters : p_c2 as checkbox.
selection-screen comment 3(56) text-027 for field p_c1.
selection-screen end of line.
parameters : p_set1 like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara2 type rs38m-selset.
selection-screen end of block a2.
AT SELECTION SCREEN ON VALUE REQUEST
at selection-screen on value-request for p_vara1.
For fetching the variants available for the program
perform fetch_variants.
at selection-screen on value-request for p_vara2.
For fetching the variants available for the program
perform fetch_variants1.
AT SELECTION SCREEN
at selection-screen.
For Validation
perform validation.
START OF SELECTION *
start-of-selection.
To get the output data and mail
perform fetch_data.
END OF SELECTION *
end-of-selection.
if f_spool = c_x.
message e000 with 'Spool Not Generated'(060).
endif.
*& Form fetch_data
To get the output data and mail
form fetch_data .
To send the output to spool
perform generate_spool.
endform. " fetch_data
*& Form generate_spool
To send the output to spool
form generate_spool .
data: l_params like pri_params,
l_days(1) type n value 2,
l_count(3) type n value 1,
l_valid type c,
l_valid1 type c,
l_params1 like pri_params.
data: l_device type usr01-spld.
*Get the printer name for the user
select single spld into l_device from usr01 where bname = sy-uname.
if l_device is initial.
l_device = 'LOCL'.
endif.
For report-1
if p_c1 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 255
LINE_COUNT = 65
layout = p_set
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params
valid = l_valid.
if l_valid <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit rkaep000 to sap-spool
using selection-set p_vara1
spool parameters l_params
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
f_spool = c_x.
if p_c2 is initial.
stop.
endif.
else.
Checking the format ( ABAP/OTF)
perform format_check tables s_email.
endif.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
For Report-2
if p_c2 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 200
LINE_COUNT = 65
layout = p_set1
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params1
valid = l_valid1.
if l_valid1 <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit gp3diehxy88snfj0391v7kf9ek7050 to sap-spool
using selection-set p_vara2
spool parameters l_params1
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
message e000 with 'Spool Not Generated'(060).
stop.
endif.
Checking the format ( ABAP/OTF)
perform format_check tables s_email1.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
endform. " generate_spool
*& Form fetch_recent_spool
Fetch the recent spool number generated
form fetch_recent_spool using p_v_spool type tsp01-rqident .
data: l_user like tsp01-rq2name.
clear : v_rqident,
v_rqclient,
v_rqo1name.
l_user = sy-uname.
Get latest Spool No
select single rqident
rqclient
rqo1name
into (v_rqident , v_rqclient , v_rqo1name)
from tsp01
where rqcretime = ( select max( rqcretime )
from tsp01
where rq2name eq l_user
and rqfinal eq '.' ).
if sy-subrc = 0 .
p_v_spool = v_rqident.
endif.
endform. " fetch_recent_spool
*& Form format_check
Checking the format ( ABAP/OTF)
form format_check tables p_s_email structure s_email.
data : l_objtype like rststype-type.
call function 'RSTS_GET_ATTRIBUTES'
exporting
authority = 'SP01'(019)
client = v_rqclient
name = v_rqo1name
part = 1
importing
objtype = l_objtype
exceptions
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if l_objtype(3) = c_otf.
Convert OTF Spool to PDF
perform convert_otf2pdf tables p_s_email.
else.
Convert ABAP Spool to PDF
perform convert_abap2pdf tables p_s_email.
endif.
endform. " format_check
*& Form convert_otf2pdf
Convert OTF Spool to PDF
form convert_otf2pdf tables p_p_s_email structure s_email .
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to get the PDF format
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page format
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_otf2pdf
*& Form convert_abap2pdf
Convert ABAP Spool to PDF
form convert_abap2pdf tables p_p_s_email structure s_email.
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to convert to PDF format
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page formatting
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_abap2pdf
*& Form send_mail
For sending mail
form send_mail tables mail structure s_email .
Structures and internal tables for the send data
data: objpack like sopcklsti1 occurs 2 with header line,
objhead like solisti1 occurs 1 with header line,
objbin like solisti1 occurs 0 with header line,
objtxt like solisti1 occurs 10 with header line,
reclist like somlreci1 occurs 5 with header line.
data: doc_chng like sodocchgi1,
tab_lines like sy-tabix.
Data for the status output after sending
data: sent_to_all like sonv-flag.
clear: it_reclist, it_reclist[],
it_objtxt , it_objtxt[],
it_objpack, it_objpack[],
it_objbin , it_objbin[],x_doc_chng.
loop at it_html.
objbin-line = it_html-line.
append objbin.
clear objbin.
endloop.
Create the document which is to be sent
doc_chng-obj_name = 'List'(012).
doc_chng-obj_descr = 'Mail'(013).
Heading
objtxt-line = 'Mail with pdf attachment'(014).
append objtxt.
clear objtxt.
Size
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
Fill the fields of the packing_list for the main document:
clear objpack-transf_bin.
The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'(015).
append objpack.
Create the attachment (the list itself)
describe table objbin lines tab_lines.
Fill the fields of the packing_list for the attachment:
objpack-transf_bin = 'X'.
Header
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'PDF'(016).
objpack-obj_name = 'Attachment'(017).
objpack-obj_descr = 'Mail with pdf Attachment'(018).
objpack-doc_size = tab_lines * 255.
append objpack.
*-Fill the mail recipient list
loop at mail.
reclist-receiver = mail-low.
reclist-rec_type = c_u.
append reclist.
clear: reclist,
mail.
endloop.
*-Send the document by calling the SAPoffice API1 module for sending
*-documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = doc_chng
put_in_outbox = c_x
commit_work = c_x
importing
sent_to_all = sent_to_all
tables
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
case sy-subrc .
when 0.
message i000 with 'Mail has been sent successfully'(006).
when others.
message e000 with 'Problem in sending the mail'(023).
endcase.
endform. " send_mail
*& Form page_format
For page foramtting
form page_format tables email structure s_email .
data : l_lines type i,
l_temp(500) type c,
l_offset type p,
l_lineslen(2) type p,
l_mimelen(2) type p,
l_tabix like sy-tabix.
clear : it_xi_pdf,
it_xi_temp.
refresh : it_xi_pdf,
it_xi_temp.
it_xi_pdf[] = it_pdf[].
Reformat the line to 255 characters wide (code from SAP)
clear: l_temp, l_offset, it_xi_temp.
describe table it_xi_pdf lines l_lines.
describe field it_xi_pdf length l_lineslen in character mode.
describe field it_xi_temp length l_mimelen in character mode.
loop at it_xi_pdf.
l_tabix = sy-tabix.
move it_xi_pdf to l_temp+l_offset.
if l_tabix = l_lines.
l_lineslen = strlen( it_xi_pdf ).
endif.
l_offset = l_offset + l_lineslen.
if l_offset ge l_mimelen.
clear it_xi_temp.
it_xi_temp = l_temp(l_mimelen).
append it_xi_temp.
shift l_temp by l_mimelen places.
l_offset = l_offset - l_mimelen.
endif.
if l_tabix = l_lines.
if l_offset gt 0.
clear it_xi_temp.
it_xi_temp = l_temp(l_offset).
append it_xi_temp.
endif.
endif.
endloop.
clear : it_xi_mime,
it_xi_mime[].
loop at it_xi_temp.
it_xi_mime(255) = it_xi_temp-line.
append it_xi_mime.
clear it_xi_mime.
endloop.
Final Data
clear : it_html,
it_html[].
it_html[] = it_xi_mime[].
For sending mail
perform send_mail tables email.
endform. " page_format
*& Form fetch_variants
For fetching the variants available for the program
form fetch_variants .
data : l_program like rs38m-programm value 'RKAEP000',
l_vara1 type dfies-fieldname value 'P_VARA1'.
clear : it_variant1,
it_variant1[].
Get variants
perform get_variants tables it_variant1
using l_program.
F4 Help
if not it_variant1[] is initial.
perform get_f4_help tables it_variant1
using l_vara1
changing p_vara1.
else.
message e000 with 'No variants available for report1'(054).
endif.
endform. " fetch_variants
*& Form validation
For Validation
form validation .
data : l_pro1 like rs38m-programm value 'RKAEP000',
l_pro2 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_c1,
l_c2.
If both check-box are unchecked
if p_c1 is initial
and p_c2 is initial.
message e000 with 'Check any one check-box'(049).
endif.
If checked without varaint
if not p_c1 is initial and p_vara1 is initial.
message e000 with 'Please give any one of the variant for report1'(055).
endif.
If checked without varaint
if not p_c2 is initial and p_vara2 is initial.
message e000 with 'Please give any one of the variant for report2'(061).
endif.
Reading the variant and fetching the mail-ids
if p_c1 = c_x.
l_c1 = '1'.
clear : s_email,
s_email[].
perform read_variants tables it_mailid
s_email
using p_vara1
l_pro1
l_c1.
if s_email[] is initial.
message e000 with 'No Id available for given Cost report1'(066).
else.
sort s_email by low.
delete adjacent duplicates from s_email comparing low.
endif.
endif.
Reading the variant and fetching the mail-ids
if p_c2 = c_x.
clear : s_email1,
s_email1[].
l_c2 = '2'.
perform read_variants tables it_mailid1
s_email1
using p_vara2
l_pro2
l_c2.
if s_email1[] is initial.
message e000 with 'No Id available for given Cost report2'(067).
else.
sort s_email1 by low.
delete adjacent duplicates from s_email1 comparing low.
endif.
endif.
endform. " validation
*& Form GET_VARIANTS
Fetching Variants
form get_variants tables p_it_variant structure it_variant1
using p_v_program type rs38m-programm.
select variant
from varid
into table p_it_variant
where report = p_v_program.
endform. " GET_VARIANTS
*& Form GET_F4_HELP
text
form get_f4_help tables p_it_variant1 structure it_variant1
using p_l_vara1 like dfies-fieldname
changing p_p_vara like p_vara1.
Fn. for Pop-Up
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = p_l_vara1
value_org = 'S'
display = ' '
tables
value_tab = p_it_variant1
return_tab = it_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
p_p_vara = it_return-fieldval.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " GET_F4_HELP
*& Form FETCH_VARIANTS1
text
form fetch_variants1 .
data : v_program1 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_vara2 type dfies-fieldname value 'P_VARA2'.
clear : it_variant2,
it_variant2[].
Get Variants
perform get_variants tables it_variant2
using v_program1.
F4 Help
if not it_variant2[] is initial.
perform get_f4_help tables it_variant2
using l_vara2
changing p_vara2.
else.
message e000 with 'No variants available for report2'(050).
endif.
endform. " FETCH_VARIANTS1
*& Form read_variants
Reading the variant and fetching the mail-ids
form read_variants tables p_it_mailid structure it_mailid
p_s_email structure s_email
using p_p_vara1 like p_vara1
p_l_pro1 like rs38m-programm
p_l_c1 type c.
data : l_temp(44),
it_valutab like rsparams occurs 0 with header line.
ranges : r_cocen for csks-kostl.
Function Module to get the variant contents
call function 'RS_VARIANT_CONTENTS'
exporting
report = p_l_pro1
variant = p_p_vara1
tables
valutab = it_valutab
exceptions
variant_non_existent = 1
variant_obsolete = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear : r_cocen,
r_cocen[].
loop at it_valutab where selname = 'KOSTL'
or selname = '_C-CCTR'.
Getting the range of cost centers
if it_valutab-option = 'BT'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-high = it_valutab-high.
For Conversion Routine
perform conversion using r_cocen-high.
r_cocen-option = 'BT'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
Getting the single cost centers
if it_valutab-option = 'EQ'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-option = 'EQ'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
endloop.
If no cost centers
if not r_cocen[] is initial.
select kokrs
kostl
datbi
telx1
from csks
into table p_it_mailid
where kostl in r_cocen.
if p_it_mailid[] is initial.
if p_l_c1 = '1'.
message e000 with 'No IDs available for report1'(059).
elseif p_l_c1 = '2'.
message e000 with 'No IDs available for report2'(062).
endif.
endif.
Deleting the blank entries
delete p_it_mailid where telx1 = space.
clear l_temp.
read table p_it_mailid index 1.
l_temp = p_it_mailid-telx1.
data : l_check.
loop at p_it_mailid where telx1 <> l_temp.
l_check = c_x.
endloop.
For checking the unique ids
if l_check = c_x.
if p_l_c1 = '1'.
message e000 with 'No unique mail-ids for report1'(058).
elseif p_l_c1 = '2'.
message e000 with 'No unique mail-ids for report2'(065).
endif.
endif.
Populating the IDs for the cost centers
loop at p_it_mailid.
set locale language sy-langu.
translate p_it_mailid-telx1 to lower case.
set locale language space .
concatenate p_it_mailid-telx1 '@allergan.com' into l_temp.
p_s_email-low = l_temp.
p_s_email-sign = 'I'.
p_s_email-option = 'EQ'.
append p_s_email.
clear p_s_email.
endloop.
else.
if p_l_c1 = '1'.
message e000 with 'No Cost Center Available for report1'(057).
elseif p_l_c1 = '2'.
message e000 with 'No Cost Center Available for report2'(063).
endif.
endif.
endform. " read_variants
*& Form CONVERSION
For Conversion Routine
form conversion using p_it_valutab_low type c.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_it_valutab_low
importing
output = p_it_valutab_low.
endform. " CONVERSION
chk this one to send script to pdf
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
plzz refer to this link..it will solve ur problem
Re: Sending a PDF document as an attachment
sending the mail with PDF attachment
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/62ae7fcd-0b01-0010-3e9d-a54f26944450
Regards
Sree -
UIButton with the same style of default UIAlertView button
Is there a way to get the same style of standard UIAlertView buttons.
I've tried to add an UIThreePartButton (the private class of buttons used in UIAlertView) but it does not work. The result still:
http://www.malcom-mac.com/image1.png
Thank youYou're going about it the wrong way.
A button component doesn't have a "click" property, it dispatches a "click" event.
So what you need to do is assign an event handler to the button click event, just like you did for the VideoDisplay instances.
What you can do is store a reference to the selected VideoDisplay (which is why I mention in your previous thread you don't need the id at all) and use that when a button is clicked.
private var selectedVideo:VideoDisplay = video1;
private function activateControls(event:MouseEvent):void {
selectedVideo = event.currentTarget as VideoDisplay;
private function playClickHandler(event:MouseEvent):void {
selectedVideo.play();
private function pauseClickHandler(event:MouseEvent):void {
selectedVideo.pause();
etc..
<mx:Button id="play_button" height="40" label="PLAY" click="playClickHandler(event);>
<mx:Button id="pause_button" height="40" label="PAUSE" click="pauseClickHandler(event);" />
<mx:Button id="stop_button" height="40" label="STOP" click="stopClickHandler(event);" />
Alternativly, you could use the selectedVideo in mxml, but that's usually not a good idea.
<mx:Button id="play_button" height="40" label="PLAY" click="selectedVideo.play();>
For instance, in this case, you probably want to stop all other videos before playing the selected one, or some other stuff may need to be done. That can easily be done in the button click event handler.
As a sidenote, you should look into using a different container than Canvas, for easier auto-layout.
A VBox might be better suited for displaying the VideoDisplay instances. No need for all the x, y positioning. Same goes for the Buttons, use an HBox container there.
Control the gaps and padding with verticalGap, horizontalGap, paddingLeft, paddingRight, paddingTop, paddingBottom of the containers, all of which can be set through CSS. -
When I go thru the process of attaching a style sheet to a line of text, it doesn't give me the preview option and doesn't attach the style to the text. I browse, select the saved CSS style that I created, but the preview button is grayed out. clicking Ok doesn't change anything. What am I doing wrong?
So if I want to have 3 or 4 different type styles in my web page, I put them all in one CSS file and link the one file to my document?
Yes. In fact, one external CSS file can contain ALL styles for your entire website.
Example CSS:
h1 {font-size: 1.5em; color: #993300; text-transform: uppercase}
h2 {font-size: 1.3em; color: #006633;}
h3 {font-size: 1.1em; color:#666;}
p {font-size: .90em; color: #000;}
.center {text-align:center}
.right {text-align:right}
Example HTML:
<h1>here is a main heading h1</h1>
<h2>here is a sub-heading h2</h2>
<h3>here is a sub-sub-heading h3</h3>
<p>here is normal paragraph text</p>
<p class="center">here is a centered paragraph</p>
This is a scaled down version of how it displays on screen.
Use the DW HTML and CSS properties inspectors to add styles to your text.
HTML & CSS Tutorials - http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
To view all Standard Text at one place
Hi,
How one can view all Standard Texts used in one SAPScript form at one place?Hi,
Good question. This is very important while designing Forms and Scripts. Standard texts are convertible into different languages. When logged on with a particluar language it gets converted into that particular Language. Thus it is advisible to maintain the Constant Texts in Standard text.
<b><u>TCODE : SO10</u>.</b>
Reward Points.
Thanks,
Tej..
Maybe you are looking for
-
Esquema de cálculo de preço bruto no pedido de compra - MM
Boa Tarde pessoal, Estou em um projeto de implementação e existe uma necessidade da empresa de trabalhar com o esquema de cálculo de preço bruto no pedido de compra. Já fiz algumas pesquisas e não encontrei uma solução standard para isso. Gostaria de
-
How do I control my office mac throught the internet from home
I have a small office network with 5 computers. The network is has internet access through a windows 2003 server PC. On the network I have 3 macs, one mac mini server running Filemaker Pro 11 which acts as a filemaker server for the other 3 Macs. Whe
-
Firefox version 3.6.12 Java - I believe 6 update 22 something like that - have verified have most up-to-date available. I am running on windows xp with upgrade 2. (I can not upgrade to 3 without crashing my system. Not even with hp's "fix" unless the
-
Whenever I try to email pictures from Iphoto 08, they show up blurry. They are perfectly clear in Iphoto before I attach them to an email. When given the option to choose the size of the picture to be sent, I have tried each one and it doesn't help w
-
HT4113 how do i unlock my ipod that never wa snyc to my pc
my ipod is locked for 43 years how do i unlock it