Problem while Integrating workflow with OID.

Hi I have a problem with integrating workflow with OID.I must execute the wf_ldap.synch_all() but I couldn't find WF_LDAP package body in the database.There is only package specification.How I can restore the wf_ldap package.
Thanks for help..

The file WFLDAPB.pls should be used to recreate the package body for WF_LDAP (this file is in the wf/sql directory).

Similar Messages

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Problem while uploading data with GUI UPLOAD Function

Hi,
I am facing problem while uploading data with FM GUI UPLOAD in out text file there are 7 row but after the FM GUI UPLOAD there are 14 entries are coming in Internal table and each alternate row is coming as blank with 0000 in some column in internal table first row is proper and second line is blank so on.
what can be the problem .
The program in which we are using this we are using it from last 2 year but we are facing problem today only.
regards,
zafar

Hi,
The file formate is same as it is from last two years it is automatically generated by one another bar code server and there is no change in the file formate.
So waht can be the problem to check any inconsistancy in system i have develop a samll program fro uploading a text file with same function module , but it is working fine.
regards,
zafar

Problem while creating xml with cdata section

Hi,
I am facing problem while creating xml with cdata section in it. I am using Oracle 10.1.0.4.0 I am writing a stored procedure which accepts a set of input parameters and creates a xml document from them. The code snippet is as follows:
select xmlelement("DOCUMENTS",
xmlagg
(xmlelement
("DOCUMENT",
xmlforest
(m.document_name_txt as "DOCUMENT_NAME_TXT",
m.document_type_cd as "DOCUMENT_TYPE_CD",
'<![cdata[' || m.document_clob_data || ']]>' as "DOCUMENT_CLOB_DATA"
) from table(cast(msg_clob_data_arr as DOCUMENT_CLOB_TBL))m;
msg_clob_data_arr is an input parameter to procedure and DOCUMENT_CLOB_TBL is a pl/sql table of an object containing 3 attributes: first 2 being varchar2 and the 3rd one as CLOB. The xml document this query is generating is as follows:
<DOCUMENTS>
<DOCUMENT>
<DOCUMENT_NAME_TXT>TestName</DOCUMENT_NAME_TXT>
<DOCUMENT_TYPE_CD>BLOB</DOCUMENT_TYPE_CD>
<DOCUMENT_CLOB_DATA>
<![cdata[123456789012345678901234567890123456789012]]>
</DOCUMENT_CLOB_DATA>
</DOCUMENT>
</DOCUMENTS>
The problem is instead of <![cdata[....]]> xmlforest query is encoding everything to give < for cdata tag. How can I overcome this? Please help.

SQL> create or replace function XMLCDATA_10103 (elementName varchar2,
2 cdataValue varchar2)
3 return xmltype deterministic
4 as
5 begin
6 return xmltype('<' || elementName || '><![CDATA[' || cdataValue || ']]>
7 end;
8 /
Function created.
SQL> select xmlelement
2 (
3 "Row",
4 xmlcdata_10103('Junk','&<>!%$#&%*&$'),
5 xmlcdata_10103('Name',ENAME),
6 xmlelement("EMPID", EMPNO)
7 ).extract('/*')
8* from emp
SQL> /
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SMITH]]></Name>
<EMPID>7369</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ALLEN]]></Name>
<EMPID>7499</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[WARD]]></Name>
<EMPID>7521</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JONES]]></Name>
<EMPID>7566</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MARTIN]]></Name>
<EMPID>7654</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[BLAKE]]></Name>
<EMPID>7698</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[CLARK]]></Name>
<EMPID>7782</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SCOTT]]></Name>
<EMPID>7788</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[KING]]></Name>
<EMPID>7839</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[TURNER]]></Name>
<EMPID>7844</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ADAMS]]></Name>
<EMPID>7876</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JAMES]]></Name>
<EMPID>7900</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[FORD]]></Name>
<EMPID>7902</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MILLER]]></Name>
<EMPID>7934</EMPID>
</Row>
14 rows selected.
SQL>

API's need to authenticate users while integrating SAP with ms ADS

Hi
Can anybody send me some code samples to authenticate users while integrating SAP with Microsoft ADS.Do suggest the methods(or API's) through which this authentication can be achieved.
thanks in advance
regards
Yogalakshmi

Hello Yogalakshmi,
you should not crosspost. Please let us keep the discussion in the original topic:
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=73100&tstart=0">how to integrate SAP with Microsoft ADS</a>
Regards
Gregor

Facing Issue while Integration Cybersource with ATG

Hi All,
I am facing issue with address verification while integrating cybersource with ATG.
Rest all integration with cybersource are working fine.
If i used VerifyOrderAddresses and mention addressVerificationProcessor to use CyberSourceAddressVerify , i get the below error related to houseno . box not found
addressVerificationProcessor=/atg/commerce/payment/CyberSourceAddressVerify
Can someone please help me on this.
Need it urgently. Pls let me know if need further details
TIA,
Mayank
Error Log :
12:03:01,992 INFO [ShoppingCartModifier] DEBUG There are 0 gift certificates to be collected
12:03:01,993 INFO [ShoppingCartModifier] DEBUG adding CreditCard to the Order
12:03:02,075 INFO [ShoppingCartModifier] DEBUG no form errors - staying on same page.
12:03:04,942 INFO [CyberSourceAddressVerify] DEBUG ----- request -----
12:03:04,946 INFO [STDOUT] ship_to_state=CA
bill_state=CA
ship_to_city=San Jose
bill_city=San Jose
bill_country=us
bill_zip=95131
ship_to_country=us
ignore_avs=
merchant_id=mykkaushik
bill_address2=
ics_applications=ics_dav
ship_to_zip=95131
bill_address1=1, Main St
ship_to_address2=
client_lib_version=Sun Microsystems Inc./1.6.0_31/Windows 7/6.1/-/Java/5.0.3
ship_to_address1=1, Main ST
merchant_ref_number=pg460011
12:03:06,320 INFO [CyberSourceAddressVerify] DEBUG ----- response -----
12:03:06,320 INFO [STDOUT] dav_rcode=0
ics_rcode=0
ics_rmsg=House/Box number not found on street.
request_id=3539115850040180464524
dav_us_info=S00000
dav_us_error_info=E421
request_token=AhijLwSRf7YylSTvL7cYIJ+1EEDyqAJGlwtJMsXXwMhEAAAA/QNM
dav_rflag=DINVALIDADDRESS
ics_rflag=DINVALIDADDRESS
merchant_ref_number=pg460011
dav_rmsg=House/Box number not found on street.
12:03:06,364 INFO [ShoppingCartModifier] DEBUG PipelineError: key=InvalidAddress; error={pg460011=House
12:03:06,367 INFO [ShoppingCartModifier] DEBUG adding form exception: InvalidAddress: House/Box number
12:03:06,367 INFO [ShoppingCartModifier] DEBUG root cause of exception: null
12:03:06,368 INFO [ShoppingCartModifier] DEBUG Transaction Marked as Rollback - redirecting to: billing
12:03:06,369 INFO [ShoppingCartModifier] DEBUG afterSet sees currentTransaction as TransactionImple < a
nStatus.ABORT_ONLY >
12:03:06,369 INFO [ShoppingCartModifier] DEBUG afterSet committing transaction TransactionImple < ac, B
tus.ABORT_ONLY >
12:03:06,494 INFO [ShoppingCartModifier] DEBUG Released local write lock using id 270000

It's an issue with the input which you given to the field:House/Box
Returning Error from Cybersource:
House/Box number not found on street.
could you please give valid number here which is the Cybersource service expecting number.

Problem in integrating xMII with VC

hi Experts,
My xMII server Version is 11.5
I followed this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033 for integrating xMII with VC.
Connection URL: http://<myXMIIServerName>/Lighthammer/ALL_TEMPLATES?version=11.5&trace=true
Driver Class Name: com.sap.xmii.custom.integration.jdbc.SAPxMIIJDBCDriver
System Alias: XMII_JDBC
Connection test is successful, after configured System.
I am getting error while FindData Seach in VC,
Inputs given are,
System: XMII_JDBC (this is my system)
Look for: Look for a table
the error is, Error-2305 Cannot retrive catalogs and schemas; check the connection to the selected systems Cannot access JDBC metadata 
I think i made mistake in connectionURL, but connection test is successful.
Please guide me, where i made mistake.
Points will be Awarded.
Thanks & Regards,
Chinnadurai R

Hi Sam,
Thanks for your reply... I am also think that i made mistake in comnnection URL ,
I have created some querys under Samples/Reports,
I gave like this::
http://<myXMIIServerName>/Lighthammer/Templates/Samples/Reports?version=11.5&trace=true and http://<myXMIIServerName>/Lighthammer/Templates/Samples/Reports?
and then like this
http://<myXMIIServerName>/Lighthammer/Illuminator/Templates/Samples/Reports?version=11.5&trace=true
I tried using all the URL shown above, but it is not listing the Querys in VC .
Can u guide me how can i form that Connection URL ..
Thanks & Regards,
Chinnadurai R

Configuration of oim 10g and oam 10g.. and integrating oam10g with oid

Hi..
i am trying to configure OAM10g and OIM10g and integrate OAM10g with OID..
please send me the documents if any had...
Thanks & Regards,
avinash

For integrating OIM 10g with OAM 10g, refer doc below:
http://docs.oracle.com/cd/E14899_01/doc.9102/e14761/oamsso.htm#sthref78
For OAM and OID integration refer:
http://docs.oracle.com/cd/E15217_01/index.htm
regards,
GP

Integrating EBS12 with OID and Oracle Single Sign-On

Hi All,
I recently installed EBS12 and followed all the instructions on metalink note 376811.1 to integrate it with OID and OSSO server.
At the end of integration to verify SSO integration with EBS12, when I access EBS login page via http://[host]:[port]/OA_HTML/AppsLogin, the following error message is displayed:
<< Start of Error Message>>
500 Internal Server Error
java.lang.NoClassDefFoundError
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:161)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
<< End of Error Message>>
Please let me know what can be the cause of this error?
Thanks,
Shyam

PLease use NOTE.249669.1 How To Collect Apache and Jserv Debugging Details
You will collect more informations.

Problem starting a workflow with a timed event.

Hi all,
I am trying to start a workflow with a timed event this way,
Start Date Expression: StringToDate("20:09", "HH:mm")
Reschedule: 1 day
I save the workflow at 20:07, but nothing happens at 20:09.
Any hints?
Thanks in advance.

Hi Thomas,
Wf-XML was implemented when XI wasn't even a glint in SAP's eye. The message arrives in the SAP Web AS and triggers a workflow directly (or responds to an incoming workflow request message).
Exception: prior to the 6.10 release of the Web AS the incoming messages are received in an ITS.
Best regards,
Alan

Problem while reversing allocations with KEU5

Dear Experts,
we encounter some problems when reversing allocations with KEU5 (using KSU5 in the background). When doing so all 4 update processes will be occupied by the system on our 2 servers. Which means that the systems is blocked.
Thanks in advance for help and best regards
Melanie

SAP OSS Says the following
This is not a program
error and completely correct
behaviour. Nevertheless, I would like provide the following
recommendations which could possibly reduce workload/improve the
runtime in the transaction KEU5:
1. Please make sure that
the flag for 'detail list' is not activated.
If the option 'detailed list' is selected, a detailed output list is
created for every segment. This takes up the largest amount of time
during the process.
2. Ensure that the Summarization that you use are updated on a regular
basis, daily if possible.
3. Also consider the
cycles dimensions recommended by SAP (a maximum
of 50 segments per cycle, a maximum total of 10,000 sender-receiver
relationships, see documentation). If possible, enter only those
objects in the cycle that are valid senders or receivers. Consider
that if, for example, you entered 100 cost centers in a group of which
only 20 are valid receivers, the complete master data validation and
database selection is carried out for all 100. See note 79224 and
130350 for further information.
4. For the definition of segments and their summary in cycles, you
should take into account the technical aspects included in note 420081.
Please take into account that the selection of data is carried out
from CE3xxxx, CE4xxxx (no effect at this point if you have archived
CE1xxxx), as explained in note 420081.
The selection of the reference data can both be carried out from a
summarization level or from object level (tables CE3xxxx, CE4xxxx).
In additional , you are
recommended to perform
this transaction during the evening/night. This will affect the system
processes/workload during peak period.

Net_PRICE problem while creating PO with BAPI_PO_CREATE1 ***ASAP

Dear All,
While creating PO with bapi BAPI_PO_CREATE1, The net price is not populating, though the logic is correct, as when i change the net price to some otrher value of in the bapi, while debugging, it is taking the Net price, but in general run, the price is over written by Gross price in PO, Please Help, Its Urgent.
Any Sample codes are welcomed, where Net_price is used.
Thanks in Advance..
Rewards Guaranteed.

Dear All,
While creating PO with bapi BAPI_PO_CREATE1, The net price is not populating, though the logic is correct, as when i change the net price to some otrher value of in the bapi, while debugging, it is taking the Net price, but in general run, the price is over written by Gross price in PO, Please Help, Its Urgent.
Any Sample codes are welcomed, where Net_price is used.
Thanks in Advance..
Rewards Guaranteed.

Problem integrating BPEL with OID

Hey,
We are setting BPEL up to work with collabsuite mid-tier. When applying the configuration steps in the ContentServices_CustomWorkflows.html provided in the devkit we run into the following problem:
Change to perform:
Create the Service-to-Service (S2S) Application Entity for BPEL, as follows:
Set the CLASSPATH variable:
CLASSPATH=$ORACLE_HOME/integration/orabpel/system/services/config:
$ORACLE_HOME/integration/orabpel/system/services/lib/bpm-services.jar:
$ORACLE_HOME/integration/orabpel/lib/orabpel.jar:$ORACLE_HOME/jlib/repository.jar:
$ORACLE_HOME/jlib/ldap.jar:$ORACLE_HOME/jlib/ldapjclnt10.jar:
$ORACLE_HOME/integration/orabpel/lib/bpm-infra.jar:
$ORACLE_HOME/integration/orabpel/lib/orabpel-common.jar:$CLASSPATH
Run the following command to create an application entity in Oracle Internet Directory:
ORACLE_HOME/jdk/bin/java oracle.tip.pc.services.identity.oid.OIDApplicationEntry AppEntity AppSubentity
Results in the following error trying to run the command:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle.tip.pc.services.identity.oid.OIDApplicationEntry
at gnu.gcj.runtime.FirstThread.run() (/usr/lib/libgcj.so.5.0.0)
at JvThreadRun(java.lang.Thread) (/usr/lib/libgcj.so.5.0.0)
at JvRunMain(java.lang.Class, byte const, int, byte const, boolean) (/usr/lib/libgcj.so.5.0.0)
at __gcj_personality_v0 (/home/oracle/product/J2EE_101200/jdk/bin/java.version=1.4.2)
at __libc_start_main (/lib/tls/libc-2.3.4.so)
at JvRegisterClasses (/home/oracle/product/J2EE_101200/jdk/bin/java.version=1.4.2)
Anybody any ideas on how to solve the problem?
Kind regards and thanks in advance,
Kristof

The file WFLDAPB.pls should be used to recreate the package body for WF_LDAP (this file is in the wf/sql directory).

Problem while sync iPhone with itunes (with cable)

hello guys
i am using iPhone 3GS version 5.1.1,
whilie i am syncing my iPhone with itunes 11 using cable (or perivious version), a message appears as
"itune is stop working, please close itune"
this message appears when itunes is "BACKING UP" the data.
please help me. i have change three cables also but still issue
i cannt understand this problem
thanks!
i am using windows 7 (64-bit)

Hey wavymitch,
I changed my iTunes account email address and Apple ID Sign-in. My iPhone and iPad 3 keeps bring up my old email address when I go to download any updates to any of the apps on the phone/pad and from there I am unable to log into my Apple ID. When I enter the settings on the devices to view "iTunes & Apps Stores" and then select "View Apple ID" I am once again unable to access with existing password which did not change in iTunes.
I appreciate your response and look forward to a solution(s). Thanks much for your help and patience!

Problem while Integrating workflow with OID.

Similar Messages

Maybe you are looking for