Problem While reading a file in text mode from Unix in ECC 5.0
Hi Experts,
I am working on Unicode Upgrade project of ECC5.0.
Here i got a problem with reading a file format which it does successfully in 4.6 and not in ECC5.0
My file format was as follows:
*4 000001862004060300000010###/#######L##########G/##########G/########
It was successfully converting corresponding field values in 4.6:
*4
00000186
2004
06
03
00000010
25
0
4
0
54.75
0
54.75
0.00
While i am getting some problem in ECC5.0 during conversion of the above line:
*4 000001862004060300000010###/#######L##########G/##########G/########
it was consider in the same # values.
I have used the following statement to open and read dataset.
OPEN DATASET i_dsn IN LEGACY TEXT MODE FOR INPUT.
READ DATASET i_dsn INTO pos_rec.
Thanks for your help.
Regards,
Gopinath Addepalli.
Hi
You might be facing this problem because of uni code. So while opening or reading the file, there is a statement call ENCODING. Use that option and keep the code page which you want. Then the problem may be solved.
Thanks & Regards.
Harish.
Similar Messages
-
Problem while reading XML file from Aplication server(Al11)
Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between. -
Problem while reading the file from FTP server
Hi Friends,
I have a problem while fetching files from FTP server.
I used FTP_Connect, FTP_COMMAND function modules. I can able to put the files into FTP server.
but I cant able to pick the files from FTP server.
anyone have faced similar issues kindly let me know.
Thanks
GowrishankarHi,
try this way..
for reading the file using FTP you need to use different unix command ..
Prabhuda -
Problem while reading multiple files through FTP Adapter
Hi,
We have a requirement to read the excel files placed in an FTP Location and as there is no Adapter to read Excel file
we are using FTP Adapter and reading the Header values of the file(name of the
file) and we are paasing as input to the Java code which will read the data nd insert into the Database.
If we place above 20 files it was reading only some files and some were left and if we delete the files and place the unread files again some files are read and if we do the same procedure then all the files were read.
Any help regaring this appreciated.
Thanks and Regards,
Nagaraju .DAre you doing anything complex for your polling, e.g. Files that must be n time old.
Can you post the WSDL so I can see the polling configuration. I only need to see the adapter configuration, not the whole file.
cheers
James -
Problem while reading XML File from Memory
I want to read the data from an XML File which is residing in memory.The XML File should be read not by the name or the location of the file but by a Response String.
So Can anybody help me out how can get this.
I tried it with BufferedInputStream but BufferedInputStream needs InputStream as a Parameter and i am not able to get what parameter should be passed into the BufferedInputStream as the syntax of this is
BufferedInputStream(InputStream in)
Its very Urgent !!!
Thanks in AdvanceI have created the parsing method.
The code is like this.
if(response.toString().equals("CS_NEWS_RESPONSE"))
*//InputStream in = new BufferedInputStream(InputStream());*
*//InputStream in = new BufferedInputStream(response.toString());*
*//BufferedInputStream b = new BufferedInputStream(in);*
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
Document doc = docBuilder.parse(in);
Element root = doc.getDocumentElement();
The code will go like this....
response.toString() is containing the response type which is the identification of that particular XML File. By using this my file is identified and after identification of this file, i should read the contents and parse them.
Sentences in the bold are the ways. Is this the correct way ??
Amit Will you be able to help me or is there anybody else who knows about this.
Edited by: Monadear on Oct 5, 2007 9:37 AM -
i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g
hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178) -
Cannot read properties files in debug mode .....
I am using JDeveloper 10g (10.1.3.0.4) and cannot seem to read properties files in debug mode, while it runs fine in Run (non debug) mode!!
For code like this:
Properties props = new Properties();
String dbPropsFile = "/pol_main.properties";
InputStream is;
is = this.getClass().getResourceAsStream(dbPropsFile); <---- ERRORS HERE!
props.load(is);
I get error messages like:
"Unable to find source file for package oracle.classloader, filename PolicyClassLoader.java".
Cannot go any further.
I am using the "hotspot" virtual machine under Project debug options. Using Sun's
JDK 1.5 update 6 with Ojvm installed.
Thanks.I think I figured out something. In jDeveloper 10.1.3, open your project properties and click on the Run/Debug treeview branch. Now Edit the Run Configuration you are using (mine is Default) and check the Run Directory. If I change this to be the root of my source, which is one level down from my .jpr file, it now uses my standard path and finds my files. I suppose you could also change this to use the classes directory as the root as long as your props files were there too. My problems seem to be the result of my project root being one folder higher than my source root due to the way our project was imported from CVS. --Ed
-
Problem while dowloading the file from Application Server
Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srinibut our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas -
Encoding problem while reading binary data from MQ-series
Dear all,
we are running on 7.0 and we have an encoding problem while reading binary data from MQ-series. Because we are getting flat strings from queue we use module "Plain2ML" (MessageTransformBean) for wrapping xml-elements around the incoming data.
The MQ-Series-Server is using CCSID 850, which we configured in connection parameters in communication channel (both parameters for Queuemanager CCSID and also CCSID of target).If there are special characters in the message (which HEX-values differ from codepage to codepage) we get errors in our adapter while executing, please see stack-trace for further analysis below.
It seems to us that
1. method ByteToCharUTF8.convert() expects UTF-8 in binary data
2. Both CCSID parameters are not used anyway in JMS-adapter
How can we solve this problem without changing anything on MQ-site?
Here is the stack-trace:
Catching com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
at com.sap.aii.af.modules.trans.MessageTransformBean.throwModuleException(MessageTransformBean.java:453)
at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:387)
at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292)
at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:84)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.ConvertBinaryToXiMessageFilter.filter(ConvertBinaryToXiMessageFilter.java:304)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.ConvertJmsMessageToBinaryFilter.filter(ConvertJmsMessageToBinaryFilter.java:112)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:87)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:123)
at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filter(TxManagerFilter.java:59)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.DynamicConfigurationFilter.filter(DynamicConfigurationFilter.java:72)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.PmiAgentFilter.filter(PmiAgentFilter.java:66)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.InboundCorrelationFilter.filter(InboundCorrelationFilter.java:60)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.JmsHeadersProfileFilter.filter(JmsHeadersProfileFilter.java:59)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.MessageInvocationsFilter.filter(MessageInvocationsFilter.java:89)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.JarmMonitorFilter.filter(JarmMonitorFilter.java:57)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.filter.ThreadNamingFilter.filter(ThreadNamingFilter.java:62)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:195)
at com.sap.aii.adapter.jms.core.channel.SenderChannelImpl.doReceive(SenderChannelImpl.java:263)
at com.sap.aii.adapter.jms.core.channel.ChannelImpl.receive(ChannelImpl.java:437)
at com.sap.aii.adapter.jms.core.connector.MessageListenerImpl.onMessage(MessageListenerImpl.java:36)
at com.ibm.mq.jms.MQMessageConsumer$FacadeMessageListener.onMessage(MQMessageConsumer.java:399)
at com.ibm.msg.client.jms.internal.JmsMessageConsumerImpl$JmsProviderMessageListener.onMessage(JmsMessageConsumerImpl.java:904)
at com.ibm.msg.client.wmq.v6.jms.internal.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:4249)
at com.ibm.msg.client.wmq.v6.jms.internal.SessionAsyncHelper.run(SessionAsyncHelper.java:537)
at java.lang.Thread.run(Thread.java:770)
Caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
at com.sap.aii.messaging.adapter.Conversion.service(Conversion.java:714)
at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:538)
at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:528)
at com.sap.aii.af.modules.trans.MessageTransformBean.processTransform(MessageTransformBean.java:471)
at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:364)
... 36 more
Caused by: sun.io.MalformedInputException
at sun.io.ByteToCharUTF8.convert(ByteToCharUTF8.java:270)
at sun.nio.cs.StreamDecoder$ConverterSD.convertInto(StreamDecoder.java:287)
at sun.nio.cs.StreamDecoder$ConverterSD.implRead(StreamDecoder.java:337)
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:223)
at java.io.InputStreamReader.read(InputStreamReader.java:208)
at java.io.BufferedReader.fill(BufferedReader.java:153)
at java.io.BufferedReader.readLine(BufferedReader.java:316)
at java.io.LineNumberReader.readLine(LineNumberReader.java:176)
at com.sap.aii.messaging.adapter.Conversion.convertPlain2XML(Conversion.java:310)
at com.sap.aii.messaging.adapter.Conversion.service(Conversion.java:709)
... 40 more
Any ideas?
Kind regards, StefanHi Stefan,
for the first MTB now we are using only one parameter: Transform.ContentType = text/plain;charset="ISO-8859-1"
The second MTB, which does the XML-Wrapping, is configured like this:
Transform.Class = com.sap.aii.messaging.adapter.Conversion
Transform.ContentType = application/xml
xml.conversionType = SimplePlain2XML
xml.fieldNames = value
xml.fieldSeparator = §%zulu§%
xml.processFieldNames = fromConfiguration
xml.structureTitle = payload
Both CCSID configuration parameters from the "Source"-Tab we've set to 850.
Now, we don't get an error anymore - sun.io.malformedInputException - , but, unfortunately, now special character conversion succeeded (we need an "ß" and we get an ISO-HEX-E1 -> á). E1 is (different from ISO) an "ß" in 850.
Any ideas? -
im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???
i have been dealing with this same issue, tried to turn off firewall and even turn of antivirud but still it gave me the same error.
-
My laptop running Windows 7 is having the error, " Windows Media Player encountered a problem while playing the file." when trying to play downloaded movies whereas the "live Starz TV" works fine. My netbook is working properly though, anyone seen this before?
- if you're still having the issue, make sure you are running all the latest video/audio codec's for windows media player and win 7 and also take a moment to check this article from microsoft.
http://www.microsoft.com/windows/windowsmedia/player/10/errors.aspx
if you find an answer let us know what fixed it!
buggin wrote:
My laptop running Windows 7 is having the error, " Windows Media Player encountered a problem while playing the file." when trying to play downloaded movies whereas the "live Starz TV" works fine. My netbook is working properly though, anyone seen this before? -
Windows Media Player encountered a problem while playing the file...
I am running WMP 11.0.5721.5280. I am running XP SP3 with every update that has come out. I have 4 GB RAM and my processor is a Pentium 4, 2.6GHz.
I have a large collection of music file ripped from my CD collection. Almost every time I want to plat a music file I get a message; Windows Media Player encountered a problem while playing the file, For additional assistance, click Web Help. When this
error box is displayed, a red 'X' placed next to the file in WMP.
When I click the "Web Help" button, I am taken to a MS website (http://windows.microsoft.com/en-us/windows7/c00d11b1) which tells me that I should go to the sound device website and make certain I have the latest driver. All of the advice which
is given does not apply to me. My sound device works fine! I can play CD, DVD (movies), and MP3 files. Even when I use RealPlayer, the same thing happens, but not as frequently.
Can anyone offer a solution to this problem?They'll help you over here.
Windows
XP forums on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
HP Pavilion g series (g6-1b50us Notebook PC), windows 7, 64-bit.
My media player keeps saying it encountered problems while playing a file. and little red x's appearing beside song titles. They did play before. Please help.Hi,
This may happen if the files were moved to a different folder or a different location.
Try this:
http://answers.microsoft.com/en-us/windows/forum/windows_7-sound/red-x-symbol-next-to-each-song-whil...
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed. -
I created and deployed a BPEL process with a JMS adapter and DB adapter.
I have tested this and it works fine.
After a few days, I try to open the project and the BPEL process, and click on the DB
adapter and it throws an exception on the designer :
"Error while reading wsdl file ... (wsdl file name) NULL Exception"
This is hard to debug as the exception does not provide any info, NULL.
This has happened several times for my project. The next time the JMS adapter hit the
same exception while opening on designer. This one I notice happened after I imported
a new schema file (xsd) into the BPEL process.
Only way around that I have for this currently is to delete and recreate the adapters, which as time
consuming as I have to re-create and re-assign a lot of the activities.
Has anyone encountered this and is there a way to fix this without deleting/recreating the adapters ?
Thanks.I experienced the same issue and found the cause and a workaround;
"Error while reading wsdl file …. Exception: null"
http://www.petervannes.nl/files/b7c08911ce3cde3677e2182bbc5f032a-47.php
Edited by: 944333 on Jul 3, 2012 10:24 PM -
A problem while implementing a file to file senario
hi all :
There is some problem while implement a file to file senario. the file couldn't be sent or recieved.
and as I try to check Check the Sender File Adapter Status via
Runtime Workbench -> Component Monitoring -> Communication Channel Monitoring ,
It is found that Adapter Engine has error status with red light. Is it why the file couldn't be sent?
Could you please tell me how to make Adapter Engine available?
Thank you very much!!!Hi Sony
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for EC1.SystemHome.cnbjw3501 found
No access to get JPR configuration
Along with what experts suggested
What is the type of Business system is this. Standalone Java?
JPR can have problem if you have a business system thats not ABAP/Java type if this system is not having a SAP TS in landscape then create Java type.
Thanks
Gaurav
Maybe you are looking for
-
How to configure multiple IP-Adresses on one NIC in OVM
Hi guys, we have some OVM Servers 2.2.1 installed. They all have three NICs in them (eth0-2). For eth0 and eth2 we need multiple IP-Adresses configured to work with our storage solution. The configuration should look like this: eth0:0 - 192.168.31.x
-
Hierarchy relationship report - - Critical and urgent rek
Hello Everyone, I have a critical problem. I have Unit in the row column displayed as hierarchy. Current and past year quantity as RKF in the column and share in relation to US as CKF in the column. US, northeast and southeast are all part of
-
How to add a hyperlink to a image button in theme area?
Hi! We need to make an image button (on the theme area) to be clickable -- i.e., once you click that image button, it will call www.yahoo.com. Please advise how to do it. Points guaranteed. Thanks!
-
We configured email router using Office 365 Exchange Online. Followed everything as mentioned in "http://blogs.msdn.com/b/niran_belliappa/archive/2014/04/10/installing-and-configuring-the-e-mail-router-for-exchange-online-and-crm-online.aspx". Test a
-
Changing Item Description in Sales document through programmatically.
Hi How to change the sales document Item Description programmatically. I have one customization form, this will open when ever the user tabbed out from Quantity column. In that user form , user might be change the item description. I want to replace