Problem while starting Managed Servers from Admin Server console

I am facing a problem while trying to start the managed servers in wlp8.1 portal from the admin server console.
<Dec 7, 2004 4:52:14 PM IST> <Info> <NodeManager@*.*:5555> <Starting Server orbitPortalDomain::orbit_ManagedServer1 ...>
<Dec 7, 2004 4:52:16 PM IST> <Info> <NodeManager@*.*:5555> <Server orbitPortalDomain::orbit_ManagedServer1 started, process id = 1,832>
<Dec 7, 2004 4:52:17 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.4.2_04-b05 from Sun Microsystems Inc.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://10.6.0.212:7001 to check if there exists a running admin server at this URL.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<Dec 7, 2004 4:52:18 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973
WebLogic XMLX Module 8.1 SP3 Tue Jun 29 23:11:19 PDT 2004 404973 >
<Dec 7, 2004 4:52:18 PM IST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://10.6.0.212:7001 to retrieve the initial configuration.>
<Dec 7, 2004 4:52:21 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\bea_turner\weblogic81\common\nodemanager\orbit_ManagedServer1\orbit_ManagedServer1.log is opened. All server side log events will be written to this file.>
The WebLogic Server did not start up properly.
java.lang.NoClassDefFoundError: com/bea/wsrp/util/debug/Debug
at com.bea.wsrp.security.WSRPIdentityAsserterProviderImpl.<clinit>(WSRPIdentityAsserterProviderImpl.java:45)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.createSecurityProvider(SecurityServiceManagerDelegateImpl.java:232)
at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:939)
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:257)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java:581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.java:698)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:731)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:874)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:717)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:822)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)
at weblogic.Server.main(Server.java:32)
Reason: com/bea/wsrp/util/debug/Debug
pls advice
Thanks
Sasanka

Hello,
There is a lot of stuff on this thread:
http://forum.java.sun.com/thread.jspa?threadID=567363&messageID=2801617
these guys are trying to run weblogic with JBuilder.
Looks like your classpath is incorrect, can you go to your admin console-->server-->remote start
copy the classpath and post it here.
Check for spaces in your classpath, missing jars or directories and miss spelt paths.
Has this problem been occuring as soon as you installed WLP or not?
Cheers,
Hoos

Similar Messages

Unable to start Managed servers from admin console

Hello!
We have a problem to start Managed Servers throw Node manager.
We get an error:
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Boot identity properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/boot.properties">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Boot identity properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/boot.properties"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Startup configuration properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/startup.properties">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Startup configuration properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/startup.properties"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server error log also redirected to server log>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Server error log also redirected to server log
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Starting WebLogic server with command line: /software/psoft/pt851/webserv/peoplesoft/bin/startManagedWebLogic.sh >
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Starting WebLogic server with command line: /software/psoft/pt851/webserv/peoplesoft/bin/startManagedWebLogic.sh
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Working directory is '/software/psoft/pt851/webserv/peoplesoft'>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Working directory is '/software/psoft/pt851/webserv/peoplesoft'
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Rotated server output log to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out00001">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Rotated server output log to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out00001"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server error log also redirected to server log>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Server error log also redirected to server log
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server failed during startup so will not be restarted>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Jan 26, 2012 2:17:54 PM> <WARNING> <Exception while starting server 'PIA1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'PIA1'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Additional information:
weblogic 10.3.3
PT8.51.11
Linux x86_64 RH5
When we starting Manged servers manualy, it's works fine.
Thank you.

Hello!
The problem is found.
We tried to startup managed server by running startManagedServer.sh script, but this script expecting to get parameters.
The NodeManager unable to send parameters to script that appears in nodemanager.properties file (StartScriptName).
So, I created a new script startPIA.sh, that calls to startManagedServer.sh and sends it 2 parameters:
./startManagedWebLogic.sh $SERVER_NAME $ADMIN_URL
Now, we can start and stop managed servers from admin console, BUT we still have an error in NodeManager:
<Jan 29, 2012 11:15:39 AM> <INFO> <peoplesoft> <PIA1> <Server failed during startup so will not be restarted>
Jan 29, 2012 11:15:39 AM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Jan 29, 2012 11:15:39 AM> <WARNING> <Exception while starting server 'PIA1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Jan 29, 2012 11:15:39 AM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'PIA1'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
There are no errors in managed servers logs.
PIA1.out:
<Jan 29, 2012 11:15:38 AM> <INFO> <NodeManager> <Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'>
Attempting to start WebLogic Server PIA1
No activity will be logged to this window.
Server activity will be logged to /software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1_*
PID for WebLogic Server PIA1 is: 27018
<Jan 29, 2012 11:15:39 AM> <FINEST> <NodeManager> <Waiting for the process to die: 26847>
<Jan 29, 2012 11:15:39 AM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Jan 29, 2012 11:15:39 AM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
The status of managed server in admin console is RUNNING, but "Status of Last Action" is FAILED.
What can be the reason?
Thank you.

Starting Managed Servers without admin Server

dear All
i have a Weblogic Server contains the following
Admin Server
LoadBalancer Server
Cluster Contains Server1 & Server2
and every thing is fine, but i have the following problem : while starting any Node from Cluster or LoadBalancer Server using startManagedWebLogic.cmd without starting up admin server, i am getting the following error in my log
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-00056: Failed to create identity store service instance idstore.ldap.provider:idstore.ldap. Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin server..     at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getIdStoreConfig(LdapIdentityStoreProvider.java:195)
     at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.access$300(LdapIdentityStoreProvider.java:70)
     at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider$NoLibOvd.getInstance(LdapIdentityStoreProvider.java:242)
     at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:114)
     at oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider.getInstance(LdapIdentityStoreProvider.java:70)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
     at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
     at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
     at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:283)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at java.lang.Class.newInstance0(Class.java:355)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1020)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)
     at weblogic.security.SecurityService.start(SecurityService.java:142)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)

Isn't this exactly what the admin service is used for?
I think you need to start the admin server before starting the other servers.
Timo

Unable to start managed servers from Admin Console "FAILED_NOT_RESTARTABLE"

I recently installed WebLogic 10.3.5, JRockit, and ECM 11.1.1.5. I'm to the point where I am trying to get Nodemanager configured so I can stop/start managed servers through the admin console. I have the following listed in Environment > Servers:
AdminConsole - running
IBR_server1 - FAILED_NOT_RESTARTABLE
managedServer1 - FAILED_NOT_RESTARTABLE
UCM_server1 - FAILED_NOT_RESTARTABLE
I followed the tutorial at http://blogs.oracle.com/jamesbayer/entry/weblogic_nodemanager_quick_sta to get to the point where the AdminServer starts when the server reboots, so I think Nodemanager is working there. If I view Machines > Monitoring, it says Nodemanager "Reachable." However, when I go to restart IBR_server1, managedServer1, or UCM_server1, I get the FAILED_NOT_RESTARTABLE status. I am using the weblogic server's IP for the machine name/host because our DNS is still screwed up. Would that have any affect on this?
I'm completely unsure what to do now. The Nodemanager log shows:
INFO - <Loading domains file: E:\oracle\MIDDLE~1\WLSERV~1.3\common\nodemanager\nodemanager.domains>
WARNING - <Domains file not found: E:\oracle\MIDDLE~1\WLSERV~1.3\common\nodemanager\nodemanager.domains>
INFO - <Loading identity key store: FileName=E:/oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
WARNING - <Node manager configuration properties file 'E:\oracle\MIDDLE~1\WLSERV~1.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
So I'm confused why it's saying the properties file and domains file are not found... I've checked and they exist at
E:\oracle\middleware\wlserver_10.3\common\nodemanager\nodemanager.properties
and
E:\oracle\middleware\wlserver_10.3\common\nodemanager\nodemanager.domains
The domains file contains
base_domain=e\:\\oracle\\middleware\\user_projects\\domains\\base_domain
Which is correct.
Any idea what I'm missing here? I can provide more detail if needed. Thank you.
EDIT: I should add that I can start the UCM and IBR managed servers using the start up scripts on the server, but that's not what I'm after. I want everything controlled through the AdminConsole and want to be sure that when the server reboots, all the managed servers come back up correctly.
Edited by: user5824683 on Oct 5, 2011 5:04 PM
Edited by: user5824683 on Oct 5, 2011 5:09 PM

I did a bit of digging, and it seems I have an issue with -Xnohup... I've verified this arugment exists in all of my managed servers properties files, yet it still bombs when I try to restart from the webLogic console. I should note that if I start fresh from the server, I can start all my manager servers using WLST nmStart().
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Oracle JRockit(R) (build R28.1.3-11-141760-1.6.0_24-20110301-1430-windows-x86_64, compiled mode)
Starting WLS with line:
E:\java\JROCKI~1.1\bin\java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=IBR_server1 -Djava.security.policy=E:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=E:\oracle\middleware\user_projects\domains\base_domain\servers\IBR_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xnohup -Xverify:none -da -Dplatform.home=E:\oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\oracle\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=E:\oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=E:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\servers\IBR_server1 -Doracle.domain.config.dir=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=e:\oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\servers\IBR_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=E:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Ducm.oracle.home=E:\oracle\MIDDLE~1\ORACLE~2 -Dem.oracle.home=E:\oracle\middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://138.126.180.177:7001 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=e:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath weblogic.Server
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: –Xnohup
Caused by: java.lang.ClassNotFoundException: –Xnohup
     at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Could not find the main class: â€“Xnohup. Program will exit.
<Oct 6, 2011 12:38:13 PM> <FINEST> <NodeManager> <Waiting for the process to die: 4252>
<Oct 6, 2011 12:38:13 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Oct 6, 2011 12:38:13 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>

Browse jms destinations on managed servers (from admin server)

I need to browse JMS destinations from the admin server (in a WebLogic
9.2 console extension) that are only deployed on the managed servers.
I can get destination attributes via the domain runtime server, but
no JNDI or actually browse the destinations. All destinations in
which I am interested are queues.
I know I can change my initial context, but if that is the way to go, is there a way to determine the managed
servers' URLs at runtime?
Thank you for any help,
Seth

hi
this worked for me (on 8.1). I suppose there are
better ways in 9.2
Context adminCtx = null;
adminCtx = getInitialContextForAdminServer();
MBeanHome adminhome = (MBeanHome)
adminCtx.lookup(MBeanHome.ADMIN_JNDI_NAME);
// Get the list of running managed
ning managed servers and iterate over itSet
Set srSet =
Set srSet =
adminhome.getMBeansByType("ServerRuntime");
Iterator sr_iter = srSet.iterator();
while (sr_iter.hasNext())
ServerRuntimeMBean bean =
timeMBean bean = (ServerRuntimeMBean) sr_iter.next();
// Get the home for the managed
for the managed server
MBeanHome remoteHome = (MBeanHome)
me = (MBeanHome) adminCtx.lookup(MBeanHome.JNDI_NAME
+ "." + bean.getName());
// Get the MBeanServer for the
anServer for the managed server
MBeanServer rmbs =
eanServer rmbs = remoteHome.getMBeanServer();
//invoke it
ObjectName objectName= new
objectName= new ObjectName("$mbean");
rmbs.invoke(objectName,operation,params,types);
Edited by deepshet at 05/05/2007 10:00 AMThank you for the help.
MBeanHome is deprecated as of 9.0, so I was unable to directly use your example. You have helped though, thank you.
As of now I am querying the domain runtime server for:
ObjectName("com.bea:*,Type=ServerRuntime")
I am then iterating through the returned Set to get the server URLs and then setting my InitialContext with a PROVIDER_URL of the managed servers. This allows me to Look Up a Destination without JNDI based on step 4 from [url http://edocs.bea.com/wls/docs92/jms/implement.html#wp1313933]here. I can then browse as needed.
The ugly part is that if I include the Admin URL in my PROVIDER_URL then it does not work, so I am checking for it as I loop through the set of ServerRuntimes and not including it.
Further though slightly less annoying is that the managed server URLs include "t3://" but if I leave it in there, a malformed URL exception is thrown when setting the PROVIDER_URL. So I also remove all of those and then preppend one on the front for PROVIDER_URL as I actually need.
It is not pretty, but it is working on the only cluster I have been able to try thus far.
If anyone was a cleaner suggestion, please share.

Starting managed servers from admin console vs. command line

Will the arguments I enter in the "Arguments" section of the "Server start" admin console page also be used if I start the managed server from the command line using startManagedWeblogic.sh?
And conversely, will changes I make to the scripts take effect when I start the server from the admin console?

No,
the arguments that you set thru Console GUI are effective when Node manager start your server.
Ammar Sajdi

Problem while reading XML file from Aplication server(Al11)

Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .

Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between.

Problem while dowloading the file from Application Server

Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srini

but our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas

Clustered enviroments -Starting/Stopping Managed servers, NodeManager & Admin server from single node

Hi,
We have 5 node Weblogic cluster. At the time of some mass activities like patching we have to stop all our managed, Admin Servers and node manager and it takes a lot of time to do this by logging in to all 5 managed servers and stopping all components. Though we have node manager configured so we can stop managed servers from console itself, but still have to login to each server to stop NodeManager and Oracle Http Servers.
Things become worse when wee have to shutdown almost 15-20 instances.
Is there a way (using wlst or shell script) that we can do all these tasks from by logging in to just one server?
Thanks,
Suraj

The simple code below would shutdown all the running Servers. Some of the APIs for ex MBeanHome are deprecated..still work though..if your concerned about that..I am working on the same using JMX API..if you want I could share that too. And also as described in the below link..you can Cluster stop and start using WLST commands. Managing the Server Life Cycle - 12c Release 1 (12.1.1)
<This code is from Oracle Weblogic documentation>
import java.util.Set;
import java.util.Iterator;
import java.rmi.RemoteException;
import javax.naming.Context;
import javax.management.ObjectName;
import java.io.*;
import java.net.*;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
import weblogic.management.WebLogicMBean;
import weblogic.management.configuration.ServerMBean;
import weblogic.management.runtime.ServerRuntimeMBean;
import weblogic.management.runtime.ServerStates;
import weblogic.management.WebLogicObjectName;
public class ServerStopper {
public static void stop() throws Exception {
    MBeanHome home = null;
    //url of the Admin server
    String url = "t3://localhost:7001";
    String username = "weblogic";
    String password = "welcome1";
    ServerRuntimeMBean serverRuntime = null;
    Set mbeanSet = null;
    Iterator mbeanIterator = null;
    try {
      // Set ContextClassloader to prevent assertions
      URL[] urls = { new File("/").toURL() };
      Thread.currentThread().setContextClassLoader(new
         URLClassLoader(urls));
      Environment env = new Environment();
      env.setProviderUrl(url);
      env.setSecurityPrincipal(username);
      env.setSecurityCredentials(password);
      Context ctx = env.getInitialContext();
      home = (MBeanHome)
           ctx.lookup("weblogic.management.adminhome");
      mbeanSet = home.getMBeansByType("ServerRuntime");
      mbeanIterator = mbeanSet.iterator();
      while(mbeanIterator.hasNext()) {
        serverRuntime = (ServerRuntimeMBean)mbeanIterator.next();
        if(serverRuntime.getState().equals(ServerStates.RUNNING)){
            serverRuntime.shutdown();
    } catch (Exception e) {
      e.printStackTrace();

Problem in starting Managed Servers

I am getting probelm in starting managed servers in WL 6.0,i tried with giving
password while starting
[wlerror.txt]

I think your port number are conflicting.
Check your port number for both the server
"Shridhar" <[email protected]> wrote:
>
>
>
I am getting probelm in starting managed servers in WL 6.0,i tried with
giving
password while starting

Problem while starting managed server using nodemanager

Hi everyone,
I am using WLST of Weblogic server 10.3, to automate the creation of domain, managed servers,JDBC,JMS resources etc.. and trying to start the managed servers using node manager. I have an environment which contains few domains. All the domains are using machine named "X".
Now, i am creating the same machine in my domain WLSTDomain. I have the following doubts.
Is there a way to check whether the nodemanager(of X) is already running.
If there is a way to check that, how can we start the managed servers in WLSTDomain using that existing nodemanager.

1. yes you can check if the nodemanage is running using the following ways.
For linux env:-
a. Check if the JAVA process for nodemanager is running ps -ef | grep java and see the nodemanager process else /usr/sbin/lsof -i:$port (port of nodemanager).
b. Login to Admin Console --> Environment --> Machines --> Click on Machines --> Nodemanager --> Monitoring will give you nodemanager status from Admin console.
c. use nm() command with WLST
Example:
wls:/mydomain/serverConfig> nm()
Currently connected to Node Manager that is monitoring the domain "mydomain"
wls:/mydomain/serverConfig> nm()
Not connected to any Node Manager
wls:/mydomain/serverConfig>
To see if WLST connects to nodemanager or not?
help('nmLog') --> to check the nm logs
2. To start the nodemanager using WLST here are the commands
Example:
For single managed Server
wls:/mydomain/serverConfig> start('myserver', 'Server', block='false')
Starting server 'myserver' ...
The server 'myserver' started successfully.
wls:/mydomain/serverConfig>
For Cluster
wls:/mydomain/serverConfig> start('mycluster', 'Cluster')
Starting the following servers in Cluster, mycluster: MS1, MS2, MS3...
All servers in the cluster mycluster are started successfully.
wls:/mydomain/serverConfig>

OIM 11gR2 : Problem while starting managed server

Hello Experts,
I ran config.sh in order to extend my schema to include APM (Authorization Policy Manager) in OIM 11gR2.
After that i took a restart of the servers. When i am trying to start the managed servers they're not starting in the RUNNING mode. Instead they're starting in the ADMIN mode.
The logs are showing the following error :
Internal Exception: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Kindly help me out.

1. yes you can check if the nodemanage is running using the following ways.
For linux env:-
a. Check if the JAVA process for nodemanager is running ps -ef | grep java and see the nodemanager process else /usr/sbin/lsof -i:$port (port of nodemanager).
b. Login to Admin Console --> Environment --> Machines --> Click on Machines --> Nodemanager --> Monitoring will give you nodemanager status from Admin console.
c. use nm() command with WLST
Example:
wls:/mydomain/serverConfig> nm()
Currently connected to Node Manager that is monitoring the domain "mydomain"
wls:/mydomain/serverConfig> nm()
Not connected to any Node Manager
wls:/mydomain/serverConfig>
To see if WLST connects to nodemanager or not?
help('nmLog') --> to check the nm logs
2. To start the nodemanager using WLST here are the commands
Example:
For single managed Server
wls:/mydomain/serverConfig> start('myserver', 'Server', block='false')
Starting server 'myserver' ...
The server 'myserver' started successfully.
wls:/mydomain/serverConfig>
For Cluster
wls:/mydomain/serverConfig> start('mycluster', 'Cluster')
Starting the following servers in Cluster, mycluster: MS1, MS2, MS3...
All servers in the cluster mycluster are started successfully.
wls:/mydomain/serverConfig>

Error while starting managed servers in a cluster

Hi,
          I have Weblogic 8.1.3 deployed on my system. We've have a Ant script that set's up the project domain etc. We have an admin server and two other managed servers which are part of a cluster. I am able to start the admin server and access the admin console without any errors. However when I start any of the managed servers in the cluster, using the following command (startManagedWebLogic.cmd Reactor-1 http://localhost:80 OR startManagedWebLogic.cmd Reactor-2 http://localhost:80)
          I get the error listed below. The same Ant script was used to setup the project on another system and it worked but I haven't been able to set it up on my system.
          The error says that it could be due to servers having duplicate names in the cluster but thats not the case here, the managed servers are named Reactor-1 and 2.
          Also, the IP address being accessed, 192.168.141.50:81 is not my system, its another system on the network. I've done a full text search for the IP address but I've not been able to find it in ANY file under c:\bea.
          Can someone please tell me if I've missed something? I'd appreciated any help with this.
          Thanks
          Ameeth
          <Mar 21, 2005 4:52:43 PM GMT+05:30> <Notice> <Cluster> <BEA-000142> <Trying to download cluster JNDI tree from server Reactor-1
          .>
          <Mar 21, 2005 4:52:44 PM GMT+05:30> <Warning> <Net> <BEA-000905> <Could not open connection with host: 127.0.0.1 and port: 81.>
          <Mar 21, 2005 4:52:44 PM GMT+05:30> <Error> <Cluster> <BEA-000141> <TCP/IP socket failure occurred while fetching statedump ove
          r HTTP from Reactor-1.
          java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: '127.0.0.1', port: '81'
          at weblogic.net.http.HttpClient.openServer(Ljava.lang.String;I)V(HttpClient.java:275)
          at weblogic.net.http.HttpClient.openServer()V(HttpClient.java:329)
          at weblogic.net.http.HttpClient.<init>(Ljava.net.URL;Lweblogic.security.SSL.SSLClientInfo;Lweblogic.security.SSL.SSLSoc
          ketFactory;I)V(HttpClient.java:128)
          at weblogic.net.http.HttpClient.New(Ljava.net.URL;Lweblogic.security.SSL.SSLClientInfo;Lweblogic.security.SSL.SSLSocket
          Factory;I)Lweblogic.net.http.HttpClient;(HttpClient.java:196)
          at weblogic.net.http.HttpURLConnection.connect()V(HttpURLConnection.java:119)
          at weblogic.cluster.MemberManager.waitForSync(J)V(MemberManager.java:213)
          at weblogic.cluster.MemberManager.waitToSyncWithCurrentMembers()V(MemberManager.java:160)
          at weblogic.cluster.ClusterCommunicationService.initialize()V(ClusterCommunicationService.java:58)
          at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:924)
          at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
          at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String)I(T3Srvr.java:344)
          at weblogic.Server.main([Ljava.lang.String)V(Server.java:32)
          >
          <Mar 21, 2005 4:52:47 PM GMT+05:30> <Notice> <Security> <BEA-090170> <Loading the private key stored under the alias DemoIdenti
          ty from the jks keystore file C:\bea\weblogic81\server\lib\DemoIdentity.jks.>
          <Mar 21, 2005 4:52:47 PM GMT+05:30> <Notice> <Security> <BEA-090171> <Loading the identity certificate stored under the alias D
          emoIdentity from the jks keystore file C:\bea\weblogic81\server\lib\DemoIdentity.jks.>
          <Mar 21, 2005 4:52:47 PM GMT+05:30> <Warning> <WebLogicServer> <BEA-000311> <Attempting to use low strength (exportable) certif
          icates with a full strength (domestic) license.>
          <Mar 21, 2005 4:52:47 PM GMT+05:30> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C
          :\bea\weblogic81\server\lib\DemoTrust.jks.>
          <Mar 21, 2005 4:52:47 PM GMT+05:30> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C
          :\bea\JROCKI~1\jre\lib\security\cacerts.>
          <Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "SSLListenThread.Default" listening on port
          7002, ip address 127.0.0.1>
          <Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "ListenThread.Default" listening on port 81,
          ip address 127.0.0.1>
          <Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <Cluster> <BEA-000102> <Joining cluster ReactorCluster on 237.0.0.1:7001>
          <Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000332> <Started WebLogic Managed Server "Reactor-1" for dom
          ain "ReactorAdminServer" running in Development Mode>
          <Mar 21, 2005 4:52:48 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
          <Mar 21, 2005 4:52:51 PM GMT+05:30> <Warning> <Net> <BEA-000905> <Could not open connection with host: 127.0.0.1 and port: 82.>
          <Mar 21, 2005 4:52:52 PM GMT+05:30> <Error> <Cluster> <BEA-000141> <TCP/IP socket failure occurred while fetching statedump ove
          r HTTP from 8288749592481618145S:localhost:[81,81,-1,-1,81,-1,-1,0,0]:192.168.141.50:81,192.168.141.50:82:ReactorAdminServer:Re
          actor-1.
          java.io.IOException: Reference to server no longer exists.
          Possible reasons for failure include having servers with duplicate names running on a cluster. Please check your configuratio
          n for this error.
          at weblogic.rmi.cluster.ServerInfoManager.updateServerInfo(Lweblogic.rmi.cluster.ServerInfo)V(ServerInfoManager.java:1
          11)
          at weblogic.rmi.cluster.ServerInfoManager.readUpdate(Ljava.lang.Object)V(ServerInfoManager.java:95)
          at weblogic.cluster.MemberAttributes.readExternal(Ljava.io.ObjectInput)V(MemberAttributes.java:103)
          at java.io.ObjectInputStream.readExternalData(Ljava.io.Externalizable;Ljava.io.ObjectStreamClass)V(Unknown Source)
          at java.io.ObjectInputStream.readOrdinaryObject(Z)Ljava.lang.Object;(Unknown Source)
          at java.io.ObjectInputStream.readObject0(Z)Ljava.lang.Object;(Unknown Source)
          at java.io.ObjectInputStream.readObject()Ljava.lang.Object;(Unknown Source)
          at weblogic.cluster.HTTPExecuteRequest.execute(Lweblogic.kernel.ExecuteThread)V(HTTPExecuteRequest.java:91)
          at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest)V(ExecuteThread.java:219)
          at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
          at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread)V(Unknown Source)

make sure you use a unique cluster multicast ip address. are you sure that your etc/hosts file has proper entries for localhost?

While starting managed servers asks for password of localhost

We have a clustered environment and we are using Virtual IPs for the Managed servers. The managed servers in the forst node is not starting.
The problem I have narrowed down is that there are startup.properties file for the managed servers.
It has argument like -Dtangosol.coherence.localhost\=xgsoapd5v1.ea.com (for SOA1)
While SOA1 it is asking for password for the above host and the managed server is not starting.
Now SOA2 has the similar argument -Dtangosol.coherence.localhost\=xgsoapd5v2.ea.com (for SOA2), but it is not asking for any password and so the SOA2 managed server is sta! rting.
Similarly the while starting BAM1 it is asking for a password , but for BAM2 it is not asking for password and it is starting.
I could not yet figure out why it is behaving differently in the first node.
This is a copy of production with a chnage in the network. That means only the IP addresses are changed. xgsoapd5v1.ea.com and xgsoapd5v2.ea.com are the hostnames
It works perfectly in production environment.

Hi
Under your domain root folder say in the main machine where you have the AdminServer, you should have a folder structure something like this:
../user_projects/domains/yourBPMDomain1/servers. Under the servers folder you can see list of each server. On the main machine you will see one AdminServer folder. Under this there should be a sub-folder named security with one file named boot.properties. This boot.properties file will have encrypted username and password for the weblogic domain.
If this security/boot.properties exist under the each server folder, then when you start the managed server, it will NOT prompt for the username/password. If it DO NOT exist, it will ask for the credentials.
Solution is go to each Machine where you the ManagedServers (SOA Server or BAM Server does not matter). Go to each server and under that create a folder named security and create a file named boot.properties and in this file enter plain text username and password something like this and save the file. Now restart all those servers.
username=domainadminusername
password=doaminadminpassword
When you start the servers, server should start taking the above information. AND server will automatically ENCRYPT the above plain text data into hash codes.
In a nut shell, go to each Server folder across all the remote machines and under that particular managed server create a folder security with one file boot.properties.
Exmaple locations:
On Machine1 - user_projects/domains/bpmDomain1/servers/soa_server1/security/boot.properties
On Machine2 - user_projects/domains/bpmDomain1/servers/bam_server1/security/boot.properties
You DO NEED the admin username and password in plain text for one time to put in boot.properties. Later on it will get encrypted, so there is no threat for any security loop holes.
Thanks
Ravi Jegga

Start managed servers via admin console

Hello,
I have installed weblogic server, created a domain, added a managed server. All working fine. Now I want to be able to start managed server through admin console.
According to this documentation (http://docs.oracle.com/cd/E13222_01/wls/docs81/adminguide/confignodemgr.html), it should all be pre-configured for development environment. But when i try start the managed server in admin console, it says "server does not have a machine associated with it." I added a machine and assigned that machine to the managed server, now it says "the Node Manager associated with machine m1 is not reachable.".
Can someone point to instructions on how to setup this on dev environment. In one of the instructions, it is suggested to change nodemanager.properties in common\nodemanager folder. But this file doesn't exist in my environment.
All i want is to start all admin and managed server with one script or with start the admin server and able to start the managed servers via console.
Thanks,

Hi,
Check from the console whether your node manager is reachable or not.
Console Path:
Machines -> <YOUR_MACHINE_NAME> -> Monitoring (tab) -> Node Manager Status (sub-tab) -> Status: Reachable
You Can follow the below link for "Node manager not reachable"
http://middlewaremagic.com/weblogic/?p=5205
Once done,check the status of the node manager.
Still even after this if the node manager is not reachable
Check the node manager logs,whether you get any exceptions
location $weblogic_home\wlserver_10.3\common\nodemanager\nodemanger.log
You can take help of the below link for trouble shooting the basic node manager exceptions.
http://middlewaremagic.com/weblogic/?p=2887
Or You can even paste the error's on this post itself,we will guide you .
Regards
FAbian

Problem while starting Managed Servers from Admin Server console

Similar Messages

Maybe you are looking for