Problem while using BCP utility for witing data in file

hi all,
I have a batch file in which I am using bcp command for reading data from MS SQL and writing it in delimiter file. Now there are some exceptions in MS SQL that while writing into file whenever it encounters new line character it switches to next line while writing and starts writing the rest of the data on next.
Could you help me in getting rid of this problem. I wanted to replace the new line character with space.
Thanks and regards
Nitin

Hi Dilip,
Before going for any other table,
As Kalnr is only one of the primary keys of table KEKO, You can try creating secondary index on KEKO, which might help in improving your report performance.
Also, you can add more conditions in where clause if possible, which will also help in improving performance.
Thansk,
Archana

Similar Messages

PROBLEM while using URL in order to open a file from a servlet

Hi,
I am having a problem while trying to open a file from my servlet by using URL connection. Following is my code sample. what happens is when I first run my project it opens the file but after that when I rerun it again and again it sometimes opens it and sometimes not. if it can't open it it gives an error saying "the file is damaged and couldn't be repaired". I don't get any exceptions. if you guys can help me I will appreciate it so much... thanks.
here is my code :
URL url = new URL("http://demobcs.ibm.com:81/test.pdf");
resp.setContentType(getContentType("http://demobcs.ibm.com:81/test.pdf"));
 ServletOutputStream sos = null;
 BufferedInputStream bis = null;
 try {
 sos = resp.getOutputStream();
 } catch (Exception e) {
 System.out.println("exception !!!!");
 e.printStackTrace();
 System.out.println("burada2");
 try {
 byte[] bytes = new byte[4096];
 //bis = new BufferedInputStream(conn.getInputStream());
 DataInputStream in = new DataInputStream(url.openStream());
 //DataInputStream in = new DataInputStream(conn.getInputStream());
 bis = new BufferedInputStream(in);
 int j;
 while ((j = bis.read(bytes, 0, 4096)) != -1) {
 try {
 sos.write(bytes, 0, 4096);
 System.out.println("file is being read ...:");
 } catch (Exception e) {
 e.printStackTrace();
 in.close();
 bis.close();
 //sos.close();
 } catch (Exception e) {
 System.out.println("exception :"+e.toString());
 e.printStackTrace();
 }

You are writing (<filesize> mod 4096) bytes of crap at the end of the file. Use your variable j instead for the number of bytes to write in your loop.

Problem while using KEKO(Product Costing - Header Data) table in the report

hi,
below is the slect query i have written.
while accessing the table KEKO( Product Costing - Header Data ) .more time is taken.
is there any alternative other than KEKO table when using in my report.
      SELECT FEH_STA VBELN POSNR FROM KEKO
           INTO TABLE IST_KEKO FOR ALL ENTRIES IN IST_VBAP_KEKO
           WHERE KALNR = IST_VBAP_KEKO-KALNR.
regards,
DILIP.

Hi Dilip,
Before going for any other table,
As Kalnr is only one of the primary keys of table KEKO, You can try creating secondary index on KEKO, which might help in improving your report performance.
Also, you can add more conditions in where clause if possible, which will also help in improving performance.
Thansk,
Archana

Getting a problem while using Microsoft ODBC for Oracle

Oracle(tm)Client and networking components not found. These components are supplied by Oracle Corporation and part of Oracle Version 7.2 or greater Client software installation. You will be unable to use this driver until these components have been installed . This error occurs while selecting the Microsoft Odbc for Oracle driver from the ODBC in control panel. Pls suggest

<BLOCKQUOTE>quote:<HR>Originally posted by sreenivas navuluri:
Oracle(tm)Client and networking components not found. These components are supplied by Oracle Corporation and part of Oracle Version 7.2 or greater Client software installation. You will be unable to use this driver until these components have been installed . This error occurs while selecting the Microsoft Odbc for Oracle driver from the ODBC in control panel. Pls suggest<HR></BLOCKQUOTE>
null

Problem in using voic eover for entering date in contacts and calender etc.

for a blind user in iphone 5s with voice over 'ON' there is difficulty in scrolling the date in calender and contacts etc. please provide "typing number pad" instead of the fancy 'scroller'.

Send feedback to Apple here:
http://www.apple.com/feedback/iphone.html

Problem while using DTW

Hello Experts,
I am puzzled with a problem while using DTW tool for migration.
while connencting this tool with database, I am facing problem
Connection to (server Nane) has failed
Error code:126
Fail to load OBServer.dll
Hope You will answer my query soon.
Thanks,
Regards,
Saurabh Jain

Saurabh Jain,
Enter sap b1 user id and password.
Enter server name correctly.
Click options,Click choose a database,Click
Choose databse,Select correct DB type,
Enter DB user,Correct DB password,Click Refresh,
Select Correct database name you want to upload.
Click Ok.
Hope above answer helps.
Jeyakanthan

Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
Tery

You have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

Can anyone help me?Time Machine couldn't complete the backup to... An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk. What is the problem? I've made no changes.

I recently starting receiving the error message "Time Machine couldn't complete the backup to... An erro occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk. I have had no problems backing up my MacBook Pro 2011 to my Western Digital My Book Live through a Linksys EA4500 router until recently. I've made no major changes. I've ran a diagnosis on my back up drive with no problems. The Time Machine back up starts, but about after about 5 to 10 minutes I get the error message. I can see the shared drive in Finder. The light on the drive blinks while it starts the back up. I can see the shared folders on the networked drive. The backup process starts but for some reason it just stops. Can anyone help?

You can't repair a network volume in Disk Utility.
Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. I know this isn't the answer you want, and I also know that the manufacturer says the device will work with Time Machine, and that it usually seems to work. Except when you try to restore, and find that you can't.
If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
If you're determined to keep using the NAS for backup, your only recourse for any problems that result is to the manufacturer (which will blame Apple.)

Error while running bulk load utility for account data with CSV file

Hi All,
I'm trying to run the bulk load utility for account data using CSV but i'm getting following error...
ERROR ==> The number of CSV files provided as input does not match with the number of account tables.
Thanks in advance........

Please check your child table.
http://docs.oracle.com/cd/E28389_01/doc.1111/e14309/bulkload.htm#CHDCGGDA
-kuldeep

Time Machine Error: "An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this?

I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this?

HT1176 My airport TM will not backup and i keep getting the error msg "Time Machine couldn't complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

Problem while using netscape.ldap.util.ConnectionPool

Hi,
We have a problem while using netscape's netscape.ldap.util.ConnectionPool class.
( iPlanet 5.1
ldap sdk 4.0 )
First we obtain a connection from the ConnectionPool class by using the constructor as below
//create pool
pool = new ConnectionPool(10, 50, "localhost", 389, "cn=Directory Manager", "password");
//get conn from pool
conn = pool.getConnection();
After doing some ldap read only operations if we disconnect using
//disconnect
conn.disconnect();
the junit test cases whihc use the above code
take sometime to execute fully
Sometimes there's no response also.
Also just the disconnection alone takes quite some time(~1000 ms)..
If the conn.disconnect() is not used then its pretty fast.
Could anybody throw more light on this issue
Thanx

I think i found the problem..correct me if i'm wrong
I tried using
pool.close( conn );
and the time taken now is almost negligible
If you can give suggestions I would be only glad

Problem while using struts 1.3.8

Hi All,
I have some problem while using struts 1.3.8 in my application.
I am using OC4J 10.1.2.0.2, my simple coding is follows:
<%@ page contentType="text/html;charset=utf-8"%>
<%@ taglib uri="/WEB-INF/tlds/struts-tiles.tld" prefix="tiles"%>
<%@ taglib uri="/WEB-INF/tlds/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/tlds/struts-html.tld" prefix="html"%>
<%@ taglib uri="/WEB-INF/tlds/struts-logic.tld" prefix="logic"%>
<html:xhtml />
<html:form action="<action page>" method="POST" enctype="multipart/form-data" >

 <label for="Subject" >* Subject:</label>
 <html:text size="40" property="subject" />


 <label for="upload" >Attachment:</label>
 <html:file size="40" property="attachmentFile" />


 <html:submit />
after clicking my the submit button in the server console i m getting
JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.tiles.commands.TilesPreProcessor.doForward(TilesPreProcessor.java:260)
at org.apache.struts.tiles.commands.TilesPreProcessor.execute(TilesPreProcessor.java:217)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at com.ed.ecomm.edcore.web.filters.SecurityFilter.doFilter(SecurityFilter.java:196)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.MonitoringFilter.doFilter(MonitoringFilter.java:138)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at com.ed.ecomm.edcore.web.filters.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:92)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
further i investigate and i removed the "enctype=multipart/form-data" from the form attribute its working fine..
but without using this attribute struts doesn't support the "upload" i.e, form file... its throwing another exeception..
could you anyone please let me know whether i can change my OC4J server version of anything need to do..
many thanks in advance

I'm having the same exact problem. Any ideas?
Schema sfactory;
Schema schema;
sfactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
ErrorHandler eHandler = new MyErrorHandler();
sfactory.setErrorHandler(eHandler);
LSResourceResolver lsrResolver = new MyLSResourceResolver();
sfactory.setResourceResolver(lsrResolver);
schema = sfactory.newSchema(new File(argv[1]));The last line gives me NullPointerException. I know the file (argv[1]) exists and can be read because I can print it with a BufferedReader.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

I am having problem while using ms word with anjal( OS X Lion 10.7.5 (11G63))

i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
moses

Those who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."

Problem while using BCP utility for witing data in file

Similar Messages

Maybe you are looking for