Problem with aggregation of Key figure

Hi All,
I am having aggregation problem with the KF, i have created a RKF AvgVeh with a constant selection on part#, and now i am using this in my CKF Rxz = avgveh * part#, the char in the cube are Supplier and VL the the value of Rxy is correct when it drilldown by VL(for each individual VL but the result row is different) but when it's aggregated by Supplier its showing a different value its showing the result row value but actually it should show the sum of all the values for each VL, can any one help with this.
VL          Rxz
VL1          58,558.71
VL2          154,629.00
VL3          101,090.40
VL4          659,843.80
VL5          47,715.03
VL6          19,286.52
VL7          31,367.04
VL8          15,041.50
VL9          142,018.05
VL10          68,092.36
VL11          991.25
Result Row      17,179,838.75 (This should actually be 1298633.66 sum of the above values, but shows different value which is same if there is no constant selection)
supplier     Rxz
Company A    17,179,838.75(this should be 1298633.66)
Company B    890899
Thanks in advance,
shetty.

HI.
We have a simiarl problem. Have you found any resolution?
Regards
Uday

Similar Messages

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. This cube is defined by me to test the non-cumulative key figure.
In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Problem with Overwrite for Key Figures in ODS

A bit of a long explanation, but the problem is not so complicated...
We have an ODS containing contract line items. Each line item has a key figure "Total Contract Target" that is marked with update type "overwrite". We have modified the extractor that delivers data for this ODS so that the key figure is set to a value from the contract header. Since we don't want the key figure to be duplicated if there are multiple line items on the contract, the user exit for the extractor modifies only the first line item delivered.
For example, overall contract target value = 100. Contract has 3 line items. Contract target value for line item 1 is 100. Target value for line item 2 and 3 is 0.
This all works fine for initial loads, but there is a problem with the business content extractor for deltas. Whenever a single change is made, it delivers three sets of records. Continuing the example, we would receive 9 records for the contract (3 sets of 3 line items). Each of the three sets contains the same records. Only the first set has the correct contract target value. Since the ODS key figure is set to overwrite, our method of setting the total contract value in the first record doesn't work, because the extractor delivers duplicates so the duplicates overwrite the total with a 0.
Would setting the key figure for total contract value to update type "additive" solve this? (I'm concerned that additions would be made if there were only a change to characteristics and not the key figure). Thanks for your assistance.

Since we ought to post solutions to problems we discover for people who search this forum...
Solved this by modifying the customer exit for the extractor to set the key figure for the first contract line item encountered AND for all subsequent records with the same contract number / contract line item. Since the key figure in the ODS is set to overwrite, this makes sure that the last record written doesn't overwrite the key figure with 0.

Currency Translation with a Calculate Key Figure

Hi,
Does anyone have experience with applying currency translation in BEX/Query Designer on a Calculated Key Figure?
I have a need for a calculated key figure to be converted to a target currency of USD (which is already defined via RRC1). I also need the Results Row to display the summation in USD.
Currently, my calculated key figure displays two currencies (MYR and USD) and an incorrect summation of both currencies.
Here is how I have defined my calculated key figure:
NODIM ( 'Consumption (STOs)' ) * NDIV0 ( 'Material Source Plant Cost' / NODIM ( 'Source Plant Price Unit' ) )
I am multiplying a quantity field by amount field and then dividing by a price per unit field. I have applied NODIM on the other fields so that the amount field will retain it's properties.
Running this query through transaction RSRT and clicking on the Generate Report button, I get the following message:
"Currency translation cannot be carried out for element 20 (my calculated key figure). Element 20 neither contains a Basic key figure nor a variable with type Amount. For this reason, you cannot and do not need to perform a currency translation."
From the above message, I must be setting my calculated key figure incorrectly.
Any ideas?
Thanks!
Hau

Hello Ajeet and N Ganesh,
Thank-you for your help. I verified that the dimensions of my key figure 'Material Source Plant Cost' was of type 0AMOUNT, so that was not the issue.
The issue was in the error message that was returned when I pressed the Generate Report button in RSRT. Essentially, currency conversions in BEX can only be performed on basic key figures or simple replacement path variables.
I can perform the currency translation on a SIMPLE calculated key figure that contains only the replacement path variable (where 'Material Source Plant Cost' is an attribute of my master data characteristic ZMAT_SRC). However, I found that I cannot perform the currency translation on COMPLEX calculated key figures, like in my example above.
To get around this currency translation issue and as suggested by the error message, I created a SIMPLE calculated key figure for replacement path variable 'Material Source Plant Cost' and performed the currency translation. The problem with this solution is that while I get my currency translation, I also get a calculated key figure that is aggregated, according to the query layout.
To get around the aggregation issue, I also created a dummy counter as a master data attribute (of ZMAT_SRC) to capture the aggregation. I assign a value of 1 to this dummy counter/master data attribute in the update rules to my ZMAT_SRC infoobject.
I then divide my new (aggregated) calculated key figure for 'Material Source Plant Cost' by the dummy counter (which is also aggregated). Essentially, I divided the aggregated replacement path variable by the scaling factor. The result is that I get a new calculated key figure that has been translated into the target currency and in the correct scaling factor. I can use the new calculated key figures in the above formula; regardless of the report is rolled-up.
Again, thanks for your help. It gave me the pieces to solve this puzzle.

Problem with the volume keys on my keyboard.

Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!

First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

InfoProvider with non-cumulative key figures

what does infoprovider with non-cumulative key figures...
noncumulative key figures..
looking for reply

it's property of the KF... nothing do with Cubes or ODS.
Name itself telling non-Cumulative KF. We can't cumulate this KF. Suppose take the Case Sales Amount and No of Employees. Sales Amount can be cumulated over Time. But No Employees can't be cumulated. Same is the Case with Stock as well.
Nagesh Ganisetti.

Problem with Sting Primary Key

I have probleme with Sting Primary Key
when i create new row
System.out.println("is new:" + acct.getEntityState());
show 1 - this row is not new
why?

Hi,
I was unable to reproduce this behavior on OWM 10.1.0.8. It appears that you have a SR open for this issue, so I would suggest to continue with that process.
Regards,
Ben

Problem with push email key and adding mailbox

There seems to be a strange problem with the email key. I added my gmail account initially but then i deleted it. I don't see any mailbox in the email setup, but i still receive notification on recieving a new email. But when I press the push email key on the home screen to open my inbox, it takes me to the email setup. I tried adding a mailbox, but when i select "add mailbox" the screen becomes whitish and nothing happens.
I need to add my gmail account again. Please help me with this. Thanks!

1. Predictive text can only be enabled in alphanumeric keypad, but from testing the QuickOffice 6 on the 5800 (same app used for both phones), It cannot use predictive text. Its not in the typing options. Furthermore, if you would be using the qwerty keyboard on the mini, predictive text AFAIK cannot be used.
2. If using "vodaphone live" is giving an error in ALL applications, then it is not the fault of your phone but of the "vodaphone live" settings not being compatible to your phone. I assumed that it was only for email that it did not work. A similar case was one on T-mobile, wherein the T-mobile GPRS settings were incorrect which leads to the same issue as you do. The fix was to configure GPRS settings manually. You can also take it to vodaphone for them to configure it themselves.
3. As I said, unless we find out what is different from the files that can play and cannot I cannot help you. Its not like I can check the files themselves. You can try attaching two each of the working files and non working files here for some of us to test on our phones.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Keyboard problem with T410 - Control Key

I have a problem with the control keys on the keyboard of T410.
I swapped my X200 keyboard over to T410 to check if it is software or hardware issues. With the X200 keyboard, the 'Ctrl' key is not working. With the T410 keyboard, 'e', 'd', 'c' and 'Ctrl' keys are not working.

Welcome to the forum!
I believe that X200 and T410 keyboards are mapped differently in BIOS.
Can you find another T410/T510 keyboard to test with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Bug: problems with the Escape key

Hi all,
In an attempt to get around real estate problems, I set my Dell 24" monitor in portrait mode. Logic 8 behaves as it should most of the time. However, there appears to be a problem with the Escape key. Most of the time, the Tools menu doesn't appear until you mouse out of the editing areas (eg into the menu area above the piano roll).
Clearly, Logic should just take its resolution and screen dimensions from the OS but there appears to be a problem in extreme portrait mode.
I'll report this but wanted to check that I'm not being an absolute and total plonker first. Anybody confirm this behaviour?
Thanks!
Pete

that sounds like a memory issue. have you tried reorganizing memory?

Keyboard problems with the "z" key

Hello everyone, I have problems with my "z" key.Recently, it is sufficent to touch the key without pressing to write the z.Unfortunately that happens also when I want to use the "t" or "u" next to it. I hope you can help me with this problem and can tell me what to do.Thanks in advance for your answers (and sorry for my bad english). greetings, bina90

Try to reset the device by pressing hold of the home and power button for 15-20 seconds and letting of when the Apple logo appears.

BEx Query - Stop Aggregation of Key Figure upon Drill

Hi,
I have a situation wherein I am joining Header and Line Item details using a BW InfoSet (Header - DSO1 and Line Item DSO2). A query is built off this InfoSet providing a single view of both the Header and Line Item information. This works great and users love it. Note that this information is coming from a 3rd part application sitting in ECC and is data before posting into SAP.
Using BEx Analyzer, we have Header and Line Item fields in the rows along with the Line Item Amount and the Header Amount. If I remove the Line Item characteristics from the rows, the Amounts get aggregated(SUM UP). This is OK for the Line Item Amount (sum up all the different lines), but not so good when the Header Amounts sum together providing an incorrect header amount.
Ex: Document Number 123 has 3 distribution lines. Total Header Amount is $100.
Doc Number(DSO1) |     Line Item Number(DSO2) |      Line Item Amount(DSO1) | Header Amount (DSO2)
123                                   1                                             $20                                   $100
123                                   2                                             $20                                   $100
123                                   3                                             $50                                   $100
This view looks good. Say, we remove Line Item Number from the rows, we now get:
Doc Number |      Line Item Amount |      Header Amount
123                              $90                       $300
The Header Amount is incorrect as it should be $100. My initial plan was to use Line Item Amount as it would aggregate up and provide the detail at the line item level and sum up to the header level.
As this information is before posting into SAP. None of the SAP validations are called up for this data and the sum of the line item amounts will not always tie to the header amount (there could be tax and freight amounts at the header level in different key figures). As seen in my example above, Line Item Amount sum up to $90 whereas the Header Amount is $100.
I guess the simplest solution would be to set the Header Amount on this report to not change with any navigation/filtering etc. As in the example, the header amount remains $100. Any way this can be achieved?
Any ideas/suggestions are welcome. Thanks in advance.
-Vivek

Hi Yasemin,
Thank you for the prompt reply. I like your idea of counting line item numbers and dividing the header amounts with the count. For my situation though, Akshay and Anshu's answer worked best and like the fact that I can leverage BEx functionality out of the box.
Akshay & Anshu,
Thank for the prompt reply. Your suggested solution worked great.
Many Thanks,
Vivek

Trouble with Non Cumulative Key Figures

Hi all of you,
I am working on Non Cumlative Key Figures, (NCKF). I have the data like this
Sales rep S100 visited SHOP S1 on 1st Jan and 10th Aug, and transacted worth 100 and 500
SHOP S2 on 1st Mar and 1st July and transacted worth 200 and 300
SHOP S3 on 3rd Sept. and transacted worth 400
Sales rep S200 visited SHOP S1 on 1st Jan and 1st Aug and transacted worth 100 and 300,
visited SHOP S2 on 1st April and transacted worth 200
I created Non Cumulative Key Figure in the following manners:
In modeling in InfoObjects I double clicked on my key figure BILLAMT and selected the Aggregation tab. I selected Counter (all values) for Exception aggregat. By default Agg. Referen. Char was 0calday. I then activated the info object and went to BEx. Here I took other IOs like Salesrep, Shop NUM and Dt. Of trans in rows and Bill amt in columns and executed the report. I am not getting the output how it should come for NON cumulative key figures.
But when I right click the key figure Bill Amount in BEx in change query mode and select properties. I go to the option Calculate result as and selected the option as Count all values. And in another option Calculate Single Value as I selected the option Count all values. I said OK, saved the query and executed it. Now the output is similar to how it comes for a Non Cumulative Key Figure query but I am unable to understand the output.
Now my doubt is where do we set the properties for Non Cumulative Key Figures? Is it in the Administrator Workbench under Modelling under InfoObjects?
OR
Is it in BEx change query mode by right clicking on the key figure and selecting properties?
Please explain.
Thank you
TR.

As for the setting for Non Cumulative key figures...the default setting is done in the Key Figure properties, where u can define the Exception Aggregation. This property is used as such in the query, but if suppose u are getting the normal aggregation in the query , what you could do is "Create The Key Figure as Global Calculated Key Figure in Bex" and go to properties...click on the Button for aggregation ..select the aggregation and define with respt to 0CALDAY ..here.
Hope this helps.

Crystal reports on SAP-BW 3.5 query - problem w. properties of key figures

Dear experts,
Creating a crystal report on a SAP-BW 3.5 query we have the following problem:
In SAP-BW query we defined a restricted key figure with property
'Calculate single value as Ranked list (olympic)'.
Within SAP-BW it works correctly; in Crystal Reports we see the
key figure without the defined property.
Example
SAP-BW
Customer     Revenue
4711            1
4812            2
4913            3
Crystal Reprts
Customer     Revenue
4711            500 EUR
4812            300 EUR
4913            100 EUR
Could anyone give us an advice to solve this?
Thanks a lot in advance.
Hagen

Edited by: Hagen Kunze on Feb 12, 2010 3:22 PM

Problem with aggregation of Key figure

Similar Messages

Maybe you are looking for