Problem with Airport. NO AIRPORT CARD INSTALLED

Hi, im using Mac OS X ver 10.6.8 my problem is with the airport. it says no AIRPORT CARD INSTALLED. This was just suddenly, and i cant find the solution. if somebody could help me on this matter. thank youP

You could try resetting the SMC and the PRAM. But I suspect the Airport card in your Mac has gone Bye Bye, died. The only way to fix that, If the 2 resets I posted above don't help, is to replace the Airport card.

Similar Messages

Problem with SB1240 USB sound card

I'm pulling hair here! I've just bought a SB240. Windows (XP Pro, SP3) detected it and I can select it fine for listening. But when I open Sound and Audio Device Properties and select Sound Recording/Volume, I see the Capture panel with the three inputs, but all the controls are greyed out and immovable. I also use the application "Total Recorder" by High Criteria, in which I can select the SB240 device but the only input line it sees is SPDIF Interface.
I'm stumped. Can anyone help?
John?

&Re: Problem with SB240 USB sound card
Thank you. I did a complete uninstall, including the device itself (from Device Manager) as well as all drivers and any SB related software. As recommended by Creative, I had previously installed the driver software from the supplied CD and that seems to have been the problem.
I let Windows re-detect the SB, but? got a "problem ... device may not work correctly.." during the detection, so I was not hopeful (this had not happened the first time I installed the device).
Nevertheless it now does work fully and is properly configured in "Total Recorder" too.
So I would suggest not using the supplied drivers and software - at least not in WinXP. But it's not very confidence inspiring.
John

Problem with my amd graphic card

Hi.. I have a problem with my amd graphic card.. The card is amd radeon 6770m.. I did format on my laptop and when I tried to install the catalyst center which includes the driver, it displays a message which say that catalyst center stop working... I have downloaded all the versions of the driver since 2011 when I bought the laptop... But I have the same problem whichever version I try.. I also have updated the bios to the last version but nothing happens..I think maybe graphic card is broken.. Thanks for reading..

Hi @Lefteris93 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your I would uninstall all the software and drivers for AMD High-Definition (HD) Graphics Driver and Catalyst Control from the control panel and the Device manager. Restart the notebook and download from here.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. This will help update the drivers that have been installed on the Notebook. If you graphics card was damaged or not functioning you would have a black or blank screen.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Problem with latest -004 AirPort Update

Hello: Downloaded and installed the 10/26 AirPort 004 update on a Early 2008 Mac Pro directly connected to the latest APE(n). Internet still wotks fine but I cannot access the APE using the AP utility--no devices seen. Wasn't this the problem with the -003 update???
AFS

If the file appears in HD/Library/Updates, then delete it and try updating again.
Recently, I installed third party software that trashed OS X 10.5.5 and I was forced to re-install the original OS X 10.5.2 (CD) as a fresh new install.
After the install, the software update OS X 10.5.5 Combo would not Validate. The download version in dmg format also failed verification.
I re-installed 10.5.2 again and ran into the exact same problems.
For the third time, I again installed the original 10.5.2, this time I used Disc Utility to check the drive, this found problems with permissions in this new fresh install and was duly repaired.
TechTool Deluxe (AppleCare Protection Plan) was then used to check that everything was indeed OK.
Screensaver was then turned off along with Energy Saver prior to the Software Update and a successful validated update to 10.5.5 resulted.
When updating the rest of the software everything updated properly except for the Java Update which would not validate.
I set Software Update to ignore the Java Update and again, used Disc Utility which again found permission problems that had to be repaired.
I then downloaded the dmg version of Java Update which installed without a hitch.
Software Updates appear to be Apple's achilles heel, but no worse than any other OS.
Unfortunately, the slightest glitch will compromise a software download or it's installation from any source, one has absolutely no control of this process except for pushing buttons.
The best download software I have used is Star Downloader, for Windows, this downloads from a number of servers simultaneously then re-assembles the separate downloads as one file. I have never had it fail.
I no longer use any of Microsoft's hardware or software, I am so happy with my iMac and Apple's efforts.
I will follow your post with interest.
Best Regards,
BearsPaw

Hi I am having problems with my old airport extreme base station. It is a 802.11g with airport utility version 5.5.3.

On a regular basis connection is lost by al of the apple products connected to it even though signal strength is still showing to be good and its green light is still on. The only way to resolve seems to disconnect it from the power and then reconnect. All the apple products connected to it are more up to date than the bsae stationis this the problem?

All the apple products connected to it are more up to date than the bsae stationis this the problem?
I think it may have more to do with the older AirPort Base Station failing than it has to do with the fact that you have newer Apple products.
One option is to perform a "factory default" reset on the Extreme, and then, reconfigure as required for your networking needs. If after this type of reset, the Extreme still acts up as you described, it may be faulty or about to fail.

Problems with brand new AirPort Express

I have had some issues with a new AirPort Utility. Here's the timeline of what I did/what happened:
- Plugged in APE
- Istalled AP Utility on Win7 machine & updated to latest version.
- Found APE wirelessly ok. Also connected RJ45 cable, and found it that way.
- Went through set up, and entered details of home network to try to get APE to connect to it. Seemed to go ok, but needed to restart the APE to complete.
- On APE restart, could no longer find it over LAN or Wireless.
- Also, couldn't restore my original network connection on Win7 machine.
I have now hit rest button on APE, I have done system restore on Win7 machine, I have power-cycled my router, and I have tried to repeat entire set up process using an XP Pro machine. All to no joy. Still can not see APE (from either machine, LAN or wireless) and still can not connect Win7 machine to home network (fine connection via XP machine, iPad and other devices, etc.)
Can someone help?

Ok, let's double-check your WDS setup ...
Set up a Wireless Distribution System (WDS)
(Note: To facilitate the WDS set up, place the base stations in near proximity of each other during the initial configuration phase. Be sure to jot down the AirPort ID MAC addresses for each of the base station that will be used in the WDS.)
Main Base Station Setup - AEBS
Either connect to the AirPort Extreme Base Station's (AEBS) wireless network, or, temporarily, connect directly (using an Ethernet cable) to the LAN port of the AEBS, and then, use the AirPort Admin Utility (located in /Applications/Utilities), in manual mode, to make the following settings.
WDS Tab
o Enable this base station as a WDS: main base station (checked)
o Allow wireless clients on this base station (optional)
o Click "+" to add the Remote base station.
o Select the AX.
o AirPort ID: <verify that this is the correct wireless MAC address for AX>
o Auto configure as a WDS remote base station (checked)
o Click "OK."
o Verify that the AX has been added to the list.
o Click "Update."
o Allow wireless clients on this base station (checked)
o New network name: <verify that this is the same as the network name for the AEBS>
o TCP/IP: Configure using DHCP
o Base Station Password: <the AX base station's password>
o Confirm: <same as previous step>
o Click "OK."

Apple TV causing problems with Airplay from Airport Express?

I am having a problem with Airplay on my home network. I have two Airplay devices - Apple TV and an Airprot Express. I soon as both of these devices are on my wireless network Airplay starts to create all kinds of errors, delays, inability to connect and ultimately both AP devices crash.
The AE is connected to the existing network and is only being used as an airplay device to send music to a set of speakers.
I have looked at the knowledge base & I tried all of the following (plus every conceivable combination):
Restored both the Apple TV & AE to factory settings.
Checked both are on independent IPs.
Checked all the settings on my router.
Restarted my router.
Changed the channel on my router (it's worth mentioning here that both devices are on a 5GHz connection).
It's also worth noting that when I did a factory reset of everything and set the ATV up on an ethernet connection everything worked swimmingly until I unplugged the ethernet cable and connected the device to the wireless network.
Both work independently (i.e. when the other is not connected to the wireless network), but need restarting if the two have been run at the same time.
So - in a nut shell - it appears to me that the two devices are interfering with each other - but how?!
Are any geniuses out there able to help?
Thanks in advance.

Thanks Winston. I put the APE onto the 2.4 connection. This didnt solve this issue, but then with the two devices on the different connections I changed the channels a few times and eventually I found a coblination that works! I now have a problem where the ATV doesn't wake up to AirPlay, but I feel this is most likely a separate issue.

Cold boot problem with X-FI Fata1ty card... Need serious help!

Hey guys:
I just finished upgrading my computer. Realized that I have a cold boot problem. In order to identify the source of problem. I began the following test.
. Remove everything except, cpu, heatsink, ram, video card. Tried to boot with those devices. => No cold boot problem.
2. Install the rest of the ram sticks (I have 4 x 52 in total). => No cold boot problem.
3. Install the other video card (my setup is 7900gtx in SLI) => No cold boot problem.
4. Install the Creative X-FI Fataty card. => COLD BOOT PROBLEM
Once the computer is shut down via the front power switch on the case, the computer will not boot again. To boot the computer, I need to switch off the main power switch on the back of the psu and switch it back on; then turn on the computer via the front power switch on the case. I tried the problem with and without the sound card. Whenever the sound card is installed. There is the problem. If there is no that sound card in my rig, then there won't be any cold-boot problem.
My rig specs:
DFI Lanparty nF4 SLI-DR Venus
AMD Opteron 65 CCBE 609 - Stock speed
4 x 52 MB G.Skill Samsung TCCD LE 2.85V DDR 400
CPU Cooling - Tuniq tower 20
2 x EVGA 7900 GTX Stock - SLI
3 x WD Raptor 74G RAID-0 SATA (-3) 0000 rpm (System)
x Seagate Barracuda 7200.7 60Gb 7200RPM NCQ SATA - 4 (Backup)
Pioneer Black DVR 0 DVD+/-RW - IDE /0
Lian-li PC-V 200B Plus-2 with little case mod
OCZ GameXstream 600W
Creative Fatalty Sound Card w/ Front Panel
Logitech Z5500 5. speakers
I need serious help. This problem is so annoying.
Tnanks and will greatly appreciate it.Message Edited by White_Hair on 0-27-200605:4 PM

The onboard sound is disabled. Unfortunately I sold the Seasonic PSU to my friend. The OCZ GameXStream is suppose to be the higher grade psu than Seasonic PSU. Also, the cold boot problem only exists if the sound card is plugged to the motherboard. I tried change different pci slot. It doesn't seem to help the problem. Thanks for the reply Message Edited by White_Hair on 2-02-200606:07 AM

UNRECONIZED PROBLEM WITH SB AUDIGY SOUND CARD

Hi, you all. Pls help me with this problem of my SB Audigy Platinum (SB0060). In Windows XP or even Windows Vista, they can find out my sound card as an Multimedia new hard ware, but when I install sound card driver from CD (original CD driver) fail to install and a message like this: "we cannot find any support products in this computer, pls make sure that is is plugged in your computer already...". I am very disappointed with this 'cause i really like the quality of this Creative sound source. Pls help me. Thanks a lot! Pls answer me : [color="#000099">[email protected](PS: THIS CD DRIVER COMES WITH THIS SOUND CARD BOX, AND I TRY TO INSTALL A NEW FRESH WINDOWS WITH STANDING ALONE SOUND CARD WITH NO CONFLICT TO OTHER PCI CARD, STILL FAILED)

. A friend of mine who also has this soundcard, claims he has a Decoder tab in his device controls in audiohq.. But I dont?!?

That is quite odd. Your Audio HQ should look like this: http://img23.echo.cx/img23/8494/hqdecode7kl.jpg. If not, then you should uninstall you drivers (using the CTZAPXX.exe app on the CD) and reinstall them.
2. When I choose to calibrate my speakers -> basic, FL, FR, RL, RR, C plays ok BUT after that a low freq sound plays for 3 secs then my SL and SR starts to play a high freq beeps respecti'vely...
The program does the same thing on my old T5400 and my current Cambridge MegaWorks 550. My brother has the Audigy 2 ZS also and his Logitech Z-5300s do it as well. I think the program is funky, not your speakers.
3. Since I want to enjoy DTS, I downloaded Windvd, cofigured it to 8 channels (7.). But the SL and SR wont play anything... So I tried Windvds test and all goes well until it is SL and SR turn, they dont play anything... Almost the same as the speaker calibration app. BUT note that in the Creative THX setup console everything works well...

Go into the Options for your DVD software (this applies to any player, not just WinDVD) and set it to S/PDIF Passthrough. This will send the digital signal to your card, which will see it and decode it. Setting WinDVD to 7. mode will try to have the CPU decode the signal. If it doesn't work with WinDVD, then try using Media Player Classic 6.4.x.x and setting the decoder settings to Digital Passthrough. Note that you need to make sure the that decoders are enabled in the Audio HQ (for which you may need to reinstall your drivers.
Note: DTS-ES supports 6.. Dolby Digital EX supports 7., I think.

Problems with second 7970 Lightning Card?

Hello
I purchased the MSI 7970 Lightning in May of last year as part of a new build. The other components of the build that affect the running of the machine are:
Asus P8Z77 WS Motherboard
Intel i7 3770K CPU
16GB Mushkin Ram (991991)
Noctua NH-U12P SE2 Cooler
Samsung 830 SSD x2
Samsung Spinpoint F2 1TB HD
Corsair AX850 PSU
Windows 7 Home Premium
USB 3.0 PCIe card with 2 internal and 2 external sockets
Sony CD Drive
With buying such high end products I thought I would have an easy hassle free build as I have built computers before with only one problem build that resulted from a faulty stick of memory. I didn't intend to overclock at all initially and intended but wanted the option to if I needed to in the future.
How wrong was I? The first Lightning card was faulty and would crash before it finished the Kombuster benchmark. The system also suffered from continual 'AMD Driver has stopped responding and has recovered' stutters and occasional crashes even on the desktop. I contacted the merchant I purchased it from and arranged a return. It took a few weeks but I did eventually receive a replacement card through MSI.
Excuse the pun, but Lightning couldn't strike twice I thought, and the next card would work. However, I still got the 'AMD Driver has stopped responding and has recovered' reports and the occasional crashes. This card did at least complete the benchmark so I kept it and put it down to driver issues.
In my quest to resolve the issue I have tried the following:
I trawled the internet looking for probable causes and have tweaked the motherboard bios according to what was recommended on Asus forums to no avail.
I have downloaded the latest bios for the motherboard
I have used the most stable settings recommended in bios so as to cause least stress on a non-overclocked CPU
I have set up my SSD's in non-raid as I read Lucid Virtu MVP doesn't like that
I have done a fresh install of Windows 7 each time I downloaded new drivers for the graphics card so that there could be no old files affecting the driver's operation
I have used graphics drivers from the MSI site for the 7970 and also from AMD without success
I have run Memtest which came up with no errors.
I have also tried using just 8GB of the RAM in various configurations on the off-chance it was a faulty stick despite the Memtest result.
I don't have limitless hours to spend trying to rectify problems with my computer. I tend to work on it when I take a holiday but, again, I can't continually take up all of my holiday time trying to sort this out. Unfortunately many moons later I have still not got a stable computer that is usable (it is intended for my work primarily so i do need it to be stable. I can't afford a crash in the middle of doing my work).
I'd like to get this rig working before the build becomes obsolete. I have built several computers before but would not consider myself an expert so please don't get too technical with the jargon.
I would welcome any suggestions even if it is to arrange another RMA for the 7970.
Thanks in advance
Trevellion.

Ok, I did a fresh install. At first I thought it had been the Lucid MVP software which was causing conflicts because the system appeared stable. The computer would even recover from sleep mode (the stage where the fans stop) without mishap which had never been able to before. Unfortunately, shortly afterwards I got the dreaded hang and the message 'AMD driver stopped responding and has recovered'. It now seems to do this every time I switch the computer on now. I just don't feel I can use this computer in it's current state for work as it's too unreliable. Once the problems start they become much more frequent.
When I enter the Action Center, click 'Maintenance' and check under 'Review your computer's reliability and problem history', I can see multiple reports of 'Video Hardware Error'
Clicking on the report gives this message:
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.1.7601.2.1.0.768.3
Locale ID:   2057
Files that help describe the problem
WD-20130102-0601.dmp
sysdata.xml
WERInternalMetadata.xml
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode:   117
BCP1:   FFFFFA800B88A4E0
BCP2:   FFFFF8800596CDB8
BCP3:   0000000000000000
BCP4:   0000000000000000
OS Version:   6_1_7601
Service Pack:   1_0
Product:   768_1
When I request Windows to check for a solution it comes up with nothing.
- Is there anything in this message that gives useful info to pinpoint the problem? I'd be grateful for any more advice on this.
Regards
Trevellion

Problems with build in wifi card in DV6-2190us.

Hi am trying to see if someone can help me out with a problem am having with my WIFI and also LAN on my laptop.
The problems am having is with connectivity and speed on WIFI and also problems connecting to a network with a Ethernet cable.
The problem am having with my wifi is when trying to connect to a network it takes me about 5 to 10 minutes just to try to connect to the network and once connected it will continue to say unidentified network and it will take 5 to 10 minutes to connect to the internet. Once connected to the network and the internet the connection will start fast and slow down to a crawl even do am 10 to 20 feet away from the wireless router and I have full bars. After the connection slows down I will get disconnected from the network and it will take me 10 to 20 minutes to get back on it.
Also when I try to connect to the network using a Ethernet cable I will get connected but if I unplug the cable and try to connected again I won't be able to connect to the network or the internet and I would have to restart the laptop with the cable plugged in.
All of the drivers on the laptop are up to date and also windows is up to date I really don't know what's going on.
I have formatted and installed Widows 7 done all of the updates I have also updated all of the drivers for the laptop but the problem continues to come up.
After talking to some of my IT friends we removed the build in wifi card from the inside of the laptop and changed it with a wifi card of a same model laptop to rule out problems with the card, but the problem continues to happen with the new card installed on the laptop. The card that came out of the laptop with the wifi problems was installed to the second laptop and the wifi problems came up but after installing the original wifi card the problems went away.
The thing that trying to figure out is why the card that came out of the working laptop won't work correctly on the laptop that's having problem with.
If anyone has any ideas on what maybe causing the problems please reply to this post I really need to have this problem fix before I start taking online classes.
Thank you for taking the time to read this post.
Laptop information.
DV6-2190us
Windows 7 64bit Home SP1
i7 1.60
Ram 8gb
AVG Pro 2012

You are posting on an iMac forum. I'd recommend posting a MBA forum, however I think you best bet is taking it into your local Apple store or AASP to determine if the Wi-Fi adapter is damaged and if it is then checking to see what options you have.

Problems with migration on a new install

I turned on my new 27" iMac, and when it asked if I wanted to import info, I was not ready because I did not have the right cable to connect my Time Machine External B/U, so I passed, and created a Bootcamp partition.
I installed Windows XP just fine, and then installed Parallels on the main admin account, and made sure it worked. then tried to import my prior user account by connecting both computers with an ethernet cable, and turned on file sharing. I had problems with lots of spinning beach ball of death on the old mac, so I figured moving to the new machine would get rid of it.
So I used Migration assistant to import from my current computer connected with Cat 5 cable, and it got 99% of the way through, then hung, like it could not gather the final info from the old computer to finish the migration, so I forced quit Migration on both computers, since there is no other way to exit w/o a successful install.
The account was there, though when I log in as that user, I see lots of folders I don't have permission to access like my documents and downloads.
So I go back to the old computer, and do an updated time machine back-up, then connect that external HD to the new iMac and do a 2nd import to a fresh user. All goes well, and I am able to log in, however, my new install of Parallels does not show up on the desktop, rather my old Parallels shows up with its different name. And I am getting spinning beach balls for 10-20 seconds in Safari, which I don't like, as something from the old computer must be corrupt to be doing this like a preference file or ?.
I have had a Mac since the early 1990's, and always only had one account that I used to run the computer, never creating a "User" account to run day to day, and I am not fully understanding the relationships between admin & user.
So my questions are;
1. what is the best way to take my documents, movies, photos, music and such from the 2nd migration, and transfer to a freshly created user account that would have no corrupted preferences causing the spinning problems. Do I put them in the shared folder, then access them from the new account, and transfer them that way, or does the admin do it?
2. What do I do about the applications that were imported, can the main admin move them and possibly the above documents to the main applications folder?
3. What about fonts and such, should they be put in the main library, or a user library?
4. Where can I find info on the allowable actions & limits of admin and users? what they can & can't do.
5. On my admin desktop, I can see my HD, Bootcamp partition, and Parallels shortcut. It is not visible on my test account, or another user account I created for #1 above. How can I give that user access?
6. How can I access the new Parallels install that shows up on the admin hd, instead of the old imported one in my user account?
7. How can I access the 2 external HD's that show up in admin and not users?
8. Can I safely delete the user that was created from my first unsuccessful migration that I had to force quit and has permission issues?
Thanks for your help, really appreciate getting up to speed on users...

No offense, though none of your replies are of any help. I am not migrating from a PPC to Intel, I don't need to reinstall, I am not a new user migrating for the first time, and I am not having any font problems.
Let me try again.
If I have a problem with an imported user account like it hangs doing certain things, how do I move all the data to a new user on the same PC, just drag all the documents, library, and similar folders to the shared folder, or the user folder?
Users/Shared
Users/User
Any help is greatly appreciated.

Problems with all Adobe sites + Dreamwaver install

Hi
Sorry to post here - the first half of this topic is general,
the second half is Dreamweaver.
1. I have been having loads of problems with Adobe websites
a. could not get into Dreamweaver Trial download page because
my IP was blocked and I am no spammer!
I had to disguise my IP in order to download it - it seems
they do not want my money!
2. Now in the forums, anything I search I get a error:
Error Occurred While Processing Request Variable
FTVAR_RESULTTYPE is undefined. Resources:
* Enable Robust Exception Information to provide greater
detail about the source of errors. In the Administrator, click
Debugging & Logging > Debug Output Settings, and select the
Robust Exception Information option. * Check the ColdFusion
documentation to verify that you are using the correct syntax. *
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB;
rv:1.9.0.5) Gecko/2008120122 Firefox/3.0.5 (.NET CLR 3.5.30729)
Remote Address 10.172.32.23 Referrer Date/Time 28-Jan-09 08:48 AM
It looks like they have a problem with Firefox 3.0.5 ?
Also sometimes pages do not load, I get a blank page, the F5
and it loads!
DREAMWEAVER
I have 'tried' to install CS4 (I do have MX2004 (time to
upgrade!) and I got a 'Found Trojan Horse Crypt.CFR' from AVG!
So, I have now stopped.
Since I cannot search the forum I had to open a topic.
Sorry again.
Any idea?
Regards all ...

> 2. Now in the forums, anything I search I get a error:
> Error Occurred While Processing Request Variable
FTVAR_RESULTTYPE is
> undefined. Resources:
use the Advanced Search option in the web forums, or use the
google groups
search to search the macromedia.dreamweaver NNTP archive.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Problem with Airport. NO AIRPORT CARD INSTALLED

Similar Messages

Maybe you are looking for