Problem with an HTML snippit and PayPal button - cant figure this one out?

Hello Mac people. We are really good with these things but this one has got us completely foxed.
We've done a tribute website in iWeb 08 for a friend and his family that were tragically murdered in November 2006 - the address is www.yemi.co.uk
We are trying to add a PayPal Donate button to the Charity Page.
Simple right? We went to our PayPal account, set up the button, previewed it (perfect), copied the code, pasted it into an iWeb HTML snippet window, clicked Apply and the PayPal button appeared on the page... Great, thats sorted right? Nope.
What happens after we publish to our .MAC account is that the PayPal button, when clicked, tries to load the entire PayPal page into the frame / area within the actual PayPal button, which is a tiny, on the iWeb page.
What we want it to do is just link to PayPal in a new window.
Tried everything we can think of to solve it including PayPal technical service, .MAC assistance etc... 3 days later we admit defeat!
Anyone have a clue what we've done wrong? Much appreciated.
Regards from the UK
[email protected]

Hi, just a quick update. We managed to solve this one by adding this to the first line of code that PayPal generates after it has been pasted into the Snippit window: target="newFormWindow" - it forces the page to open in a new window and gets round the problem we were having.
Hope this helps somebody else out in the future. Thanks.

Similar Messages

MIDI CLOCK stopped working and I can't figur this one out.

I have been sending MIDI clock to my Native Instruments Guitar Rig so I can sync the Loop Machine with Logic, everything was working pretty good till...??? I am not sure what I could have done to goof it up but now I get no MIDI signal out the port ( I set it to all MIDI ports). I tested the cables with a LED tester and all the settings I set to get it working in the first place but now Logic seems to not be sending the clock any longer. I also sync a Micron keyboard and use its arpegiator... well I was till this happened. Anyone have any ideas?
Thanks!

Hi,
Delete Logic preferences from the user>library>preferences folder
(export your key commands before deleting)
G

Ok, im new to numbers but i cant work this one out. In column A is an average of hours worked. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column a

Ok, im new to numbers but i cant work this one out. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column A. When column C is equal or greater then 8 i need column D to equal the sum of A and B.

Hi Lucas,
Try this:
Formula in D2 (and Fill Down) =IF(C2<8, A2,A2+B2)
The IF function follows the logic of if, then, else.
IF(this is true, then do this, else do that)
If it is raining, then stay at home, else hold a picnic .
Regards,
Ian.

Problems with broadcom wlan adapter and wlan-button.

I've got a laptop (HP Compaq 6715S), which has an integrated wlan adapter (broadcom 4311/4312?). A couple of weeks ago the adapter was working ok with ndiswrapper and bcmwl5.inf driver, but it stopped working recently probably after ndiswrapper and/or kernel upgrade. Loading the ndiswrapper module from rc.conf made the whole system kernel panic (IRQ problem?) until I added:
acpi=noirq
to the kernel boot parameters. Now this error doesn't occur every time I load ndiswrapper, but the problem still exists. BCM43xx driver doesn't work either. I'm using the 64-bit arch.
in my rc.conf I have:
MOD_AUTOLOAD="yes"
MOD_BLACKLIST=(pcspkr joydev bcm43xx bluetooth hci_usb pcmcia yenta_socket pcmcia_core)
MODULES=(fglrx ieee80211 ieee80211softmac ieee80211_crypt ieee80211_crypt_wep ieee80211_crypt_tkip
ieee80211_crypt_ccmp powernow-k8 k8temp thermal fan battery button cpufreq_powersave cpufreq_ondemand
freq_table)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
DAEMONS=(syslog-ng dbus laptop-mode acpid cpufreq @alsa network wicd gdm)
lspci:
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: ATI Technologies Inc Unknown device 7914
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 7915
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
30:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)
dmesg |grep ndis (after error)
ndiswrapper version 1.49 loaded (smp=yes, preempt=yes)
ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver
ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
Modules linked in: ndiswrapper snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss
snd_mixer_oss container tsdev rtc_cmos rtc_core rtc_lib serio_raw evdev psmouse i2c_piix4 i2c_core ehci_hcd
ohci_hcd shpchp pci_hotplug cpufreq_ondemand cpufreq_powersave k8temp ieee80211_crypt_ccmp
ieee80211_crypt_tkip ieee80211_crypt_wep ieee80211softmac ieee80211 ieee80211_crypt fglrx(P) usbcore tg3
snd_hda_intel snd_pcm snd_timer snd_page_alloc snd_hwdep snd soundcore ac button battery fan sbs thermal
video output powernow_k8 freq_table processor ext3 jbd mbcache sd_mod sr_mod cdrom sg ahci ata_generic
pata_atiixp libata
[<ffffffff88405e77>] :ndiswrapper:win2lin2+0xe/0x11
[<ffffffff883fa330>] :ndiswrapper:IoAcquireCancelSpinLock+0x10/0x20
[<ffffffff883fae47>] :ndiswrapper:IofCompleteRequest+0x87/0x180
[<ffffffff883fc4d2>] :ndiswrapper:pdoDispatchPnp+0x52/0x490
[<ffffffff88400c08>] :ndiswrapper:mp_init+0xa8/0x1e0
[<ffffffff883fa5f4>] :ndiswrapper:IofCallDriver+0x34/0xc0
[<ffffffff883fb930>] :ndiswrapper:IoSyncForwardIrp+0x90/0xd0
[<ffffffff88400e1b>] :ndiswrapper:NdisDispatchPnp+0xdb/0xee0
[<ffffffff883fb1db>] :ndiswrapper:IoInitializeIrp+0x3b/0x70
[<ffffffff88405e77>] :ndiswrapper:win2lin2+0xe/0x11
[<ffffffff883fa5f4>] :ndiswrapper:IofCallDriver+0x34/0xc0
[<ffffffff883fa61f>] :ndiswrapper:IofCallDriver+0x5f/0xc0
[<ffffffff883fa330>] :ndiswrapper:IoAcquireCancelSpinLock+0x10/0x20
[<ffffffff883fa5f4>] :ndiswrapper:IofCallDriver+0x34/0xc0
[<ffffffff883fb6bf>] :ndiswrapper:IoBuildSynchronousFsdRequest+0x2f/0x50
[<ffffffff883fc9fc>] :ndiswrapper:IoSendIrpTopDev+0xac/0x100
[<ffffffff883fccff>] :ndiswrapper:pnp_start_device+0x4f/0xa0
[<ffffffff883fcf6f>] :ndiswrapper:wrap_pnp_start_device+0x21f/0x260
[<ffffffff883fd000>] :ndiswrapper:wrap_pnp_start_pci_device+0x50/0x60
[<ffffffff883ef04c>] :ndiswrapper:loader_init+0x13c/0x260
[<ffffffff883700b7>] :ndiswrapper:wrapper_init+0xb7/0xc3
The other problem that I have is the wlan-button: The wlan adapter isn't always turned on at boot and I have found no way to turn it on from linux. It can be turned on by booting to windows or resetting the bios to defaults, but it is not very nice. I've noticed that pressing the wlan button adds one usb device:
Bus 001 Device 003: ID 03f0:171d Hewlett-Packard
Is there a way to fix these problems?

lenni wrote:
When I used to use ndiswrapper, just downloading one of the generic INF files didn't do the trick for me. I had to go to my manufacturer's homepage and download it there extract the drivers from the exe and use them in order to get my card work reliably.
Also, have you used a 64 bit driver? This guy reckons you need it:
http://www.linuxquestions.org/questions … ost2952703
I guess I solved it. I have been using the 64-bit driver, but have tried the 32-bit driver from hp diver site too. For some reason ndiswrapper seems to install a driver named "ndiswrapper" with this 32-bit driver, which is why it didn't work. So my solution was:
1) Get the 32-bit driver from hp.com
2) rmmod ndiswrapper
3) remove all installed ndiswrapper drivers: ndiswrapper -r <drivername>
4) installed the 32-bit driver: ndiswrapper -i bcmwl5.inf
5) ndiswrapper -l gave me:
bcmwl5 : driver installed
device (14E4:4312) present (alternate driver: bcm43xx)
ndiswrapper : invalid driver!
6) Got rid of the weird ndiswrapper driver inside ndiswrapper: ndiswrapper -r ndiswrapper
7) modprobe ndiswrapper
Rebooted a couple of times and it seems to work ok.
How about the wlan-button problem?

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Problem with combining 29.97fps and 50i (25 fps) sources into one sequence Pro 5.5

Hello,
It's been a real pain. I have two cameras, one use 50i HD format and one saves as MOV HD files 29.97fps, no option to change it.
I created a new project and finished all the editing. Now while the 50i shots looks good, the MOV, 29.97 shots looks realy bad, they are very choppy.
Especially when panning or zooming.
I created a new sequence that is HD 29.97 fps, and copy and paste the whole old sequence data into the new time line. Surprisingly the 29.97 shoots looked much better and also the 50i shoots looks fine.
But now I have all these missed sync parts on the sequence with no easy why to fix it.
It looks like the transformation from 25fps to 29.97 fps starched some clips.
Don't know what to do?
I read that you can use after effect to trasfrom the old shoots within Premiere into 25fps much better then Premiere doe's but I don't know how to do it.
I really don't want to re edit all form scratch.
Many thanks

Never leave empty gaps in the timeline, fill with black. File > New Item > Black Video will create a slug you can use.
When I mention Media Encoder, I do mean exporting direct from Premiere - that is just an integrated version of AME. If you choose "Queue", that then opens AME as a stand-alone app.
Advice on check boxes - boxes that are unchecked by default are in that state for a reason - they only help in certain situations, so if unsure what the result might be, stick with the defaults. For instance "Max Render Quality" sounds like a no-brainer, but in reality only helps when scaling the output. If exporting 1080 to 1080 for example, then no need for that.
In another thread today, someone had poor quality video output and it was a direct result of checking the "Frame Blending" box - for reasons unknown ;-)
Thanks
Jeff Pulera
Safe Harbor Computers

Zen Micro Problem -- Just TRY and figure this one out

So, I never dropped my zen micro, never played soccer with it, never sent it to the moon. It's possible someone else has, and isn't fessing up to it, but all I know is I came home one day to find a non-working Zen Micro.
The symptoms: I can charge batteries, I can make it glow blue by plugging it in. If it's running just off battery it gets to the CREATIVE screen and just stays there until the battery dies. If it's plugged in, it does the same thing but glows blue.. and doesn't die.
I CAN go into recovery mode, but none of the options do anything [well, restart does.. it takes me back to the CREATIVE screen]. The other ones keep formatting and whatnot forever, which is a good indication it just froze as soon as I pressed format.
I also tried to plug it in, and format it off my computer as a removable disk, but unfortunately neither my computer nor my friends is picking up the Zen Micro as a removable disk and placing it on the My Computer tray.
If anyone has any advice, if anyone has seen this type of thing before, etc etc, please share.
Desperately seeking help,
Music Anonymous

You'll need to call Creative's support phone line so that they can give you an RMA number for your player. Then, just ship it to the address they tell you.

Hallo Apple, what does it mean this Message0x7fff7500b300 resumeBackgroundConversion: background conversion started/resumed for lv 82832E6C-B6AC-46A6-8836-715414EBE8F4. Because I have a Problem with my CPU: Kernel_task and corestoraged

Hallo Apple,
what does it mean this Message0x7fff7500b300 resumeBackgroundConversion: background conversion started/resumed for lv 82832E6C-B6AC-46A6-8836-715414EBE8F4.
Because I have a Problem with my CPU: Kernel_task and corestoraged.

I'm having this same issue. I also have this line in my log, which is curious:
12/14/14 7:13:07.822 PM netbiosd[16766]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
Is this related to the problem? What does it mean?
My 2010 27" iMac running Yosemite won't wake up from sleep.

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

Problem with whitespace then loading and saving xml

i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
but then i do changes to the Textlayout it shows up like this --->
Text in Container not modifed
Text in Container modifed ---> with space beween the colorchanged string
Text inContainersend and loaded ---> i think this has something to to with the
TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
can someone give me a hint...

Hi,
the link is --->
http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
Try it out:
1. change the text and
2. give a XML-Identifer
   and then send it to the server. --> send to server
3. type in the XML-Identifer you have used and
4.   load it from the server ---> Load from Server Button
evering works ok exept the columns formating.
I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
With best regards
Michael Sprinzl
--- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
Von: robin.briggs <[email protected]>
Betreff: Problem with whitespace then loading and saving xml
An: "Michael sprinzl" <[email protected]>
Datum: Donnerstag, 17. September 2009, 2:12
Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
Note: When using inline graphics, the source property of the InlineGraphicElement object   must either be an instance of a DisplayObject or a Class object representing an embedded asset.   URLRequest objects cannot be used. The width and height of the inline graphic at the time the line   is created is used to compose the flow.
- robin

I have a problem with the effect gallery and the saving libraries in Illustrator CS6

Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)

I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP.

Problem with update Photoshop, Illustrator and Indesign CS6

Hi all. I have problem with update Photoshop, Illustrator and Indesign CS6 on OSx 10.8.4. Application are OK but update (bug fixies) not working. Update failed. (U44M1P7)

Hi El Gondo,
The following might explain and help solve the problem...
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html
Thanks!
Ankit

In FF4.0.1 problem with using HTML creator in WebCT. WHY? Not a problem in FF4.0.0

In FF4.0.1 problem with using HTML creator in WebCT. WHY? Not a problem in FF4.0.0

Hi Shane,
I passed through all the described problems in the list, and after doing several tests the error that you described is always present if the "jpcsclite_en_US.properties" is not present in the same place of the "jpcsclite.properties". I really don't know the reason, I just copied and pasted the same file, renamed the copy and the error was gone... though both of them include the line where the .dll is found!
That's how it worked for me, but if anybody knows how it works without that dirty trick, it would be good.
Regards,
Leandro
PS: Just in case that somebody is using the version JCSDK3.0, I did not find the .dll in that version, but in the JCSDK2.2.2 *(:-S)*

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store

I have a problem with mi iPad 3 and iCloud.

I have a problem with my iPad 3 and iCloud.
First. When i try to turn on the automatico downloads of apps and music on my ipad ican't. I put on the buttons but they automaticly turn into off.
Second. I have an macbook with iWork and mi iPad has iWork too but i can use iCloud because the documents that i create in the iPad doen't go online.
I did a little research and i think the troubles are because apple didn't associate mi ipad with my apple id, i had retored mi ipad a lot of times and it doen's fix the problem.
What do i can do?
I'm sorry but i'm learning english, so i'm sorry if you have a hard time trying to understand.
Thank you

Hi Omar1510,
If resetting your iPad allows it to charge, but only temporarily, you may want to make sure that you have your data backed up and try restoring the device (you may want to test the charging before reloading your data). You may find the following article helpful:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Regards,
- Brenden

Problem with an HTML snippit and PayPal button - cant figure this one out?

Similar Messages

Maybe you are looking for